Spouse life insurance for same *** spouse

We are configuring our health/insurance plans to allow same *** spouse as a dependent/beneficiary/enrollee. We were advised to create a new subtype for family member called ‘Same *** Spouse’ rather than just using the existing ‘Spouse’. The problem we are running into is on our Spouse Life Insurance. SAP only allows costs to be determined based on the age of either the Employee, the Spouse or the Domestic Partner. We are not able to choose the new Same *** Spouse. Has anyone found a way around this? How is everyone handling Same *** Spouses (for legally married spouses). Are you just using the existing Spouse relationship? If so, has that caused any issues elsewhere?

Hi,
I'm not sure why you want to use a different subtype. Spouse is not gender specific so it can be used for same *** partner as well (you will get a warning message saying that the gender is the same but it will be possible to save the record and thus have the same functions), and this is the recommended process.
It will make the rest of the configuration much more easier. I actualy believe that it might be discriminatory to have different suptype for same *** spouse, which is probably why SAP did not provide a specific subtype in the the first place.
Best regards
Sarah

Similar Messages

I updated my spouses iphone with the same apple id, now he is recieving my texts. how do i change without loosing his data?

I updated my spouses phone using the same apple id. I must have clicked ok to something i shouldnt have at some point.....because now he is recieving my texts! I still recieve my texts, but he also recieves them.
I went to restore his phone but it said it would only restore to factory settings and i dont want to loose the data.
How do i solve this?

Try settings, messages, tap on send & receive, there should be phone number options to choose from...uncheck your phone number.
This is an added feature to allow a user to see messages across multiple platforms like your iPad and iPhone.

Our benefit administrator keeps getting an error on adding a social security number that starts with a 9, that is a valid SSN for a spouse, How do we allow this to go through?

Our benefit administrator keeps getting an error on adding a social security number that starts with a 9, that is a valid SSN for a spouse, How do we allow this to go through?

To attempt a new chat session...
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
http://helpx.adobe.com/x-productkb/global/service1.html

HR Benefits - EOI for Life Insurance

Hi,
We have noticed that EOI is being required when the insurance coverage amount goes down as well as up for coverage level changes.
Is this an expected result?
We have configured "Change of Coverage" at 1x Salary and thought it only applied to increases. For example, going from 1x to 3x would require EOI, but going from 3x to 1x would not.
Has anyone else had this experience?
Thanks,
Terry

Thanks.
The EOI report monitor is what they are using to administer EOI. The config condition as previously described is "Change of Coverage" at 1x Salary for this Life Insurance.
I am trying to ascertain whether coding EOI for a "change" means changes up and down to SAP.
Terry

HR Benefits - Age limit for Life Insurance,

Hi,
If we want to create an upper age limit for spousal life insurance and employee life insurance plans that already exist, what is the best method for each?
For the spousal insurance, the Define Dependent Eligibility Rules seems to only apply to medical plans. Looks like you can only create beneficiary eligibility for insurance plans.
Thanks Terry

Hi,
Jay - "Define Dependent Eligibility Rules" is where I could only find medical plans. The life insurance only seems to allow beneficiary criteria.
Ram - I had tried the Age grouping, but it looks like it's controlling coverage costs. So if I create an addtional age range with a cost of $0, they could still have the plan. But they really shouldn't have it any longer. I want them to show up on the participation monitor. At least this was my interpretation. I thought this may be a pretty common requirement.
Terry

Imputed Income for Dependent Life Insurance

We are trying to configure Imputed Income for Dependent Life Insurance and having issues with the amounts being calculated.
Using the formual proivded by the IRS the imputed income is calculated as follows:
                                              Dependent
Age                                              57
Coverage Amount                        375,000.00
Less IRS Allowance                                   0.00
Taxable Coverage                        375,000.00
Divided by 1000                               375.00
IRS table factor                                   0.43
Imputed Income                               161.25
Less amt paid w/h post tax                        (124.13)
Adjusted Imputed Income per IRS calc           37.12
SAP calculates the folliwng amounts though. One question is our uncertainty as to which of theswe two WT's is the inouted income.
Imputed Income From SAP                              57.67 /bd1
Imputed Income From SAP                              18.74 /bt2
Any suggestions where to look to get this resolved?

Hello Brent,
I believe that you are talking about wagetype /BT1.
/BD1 - EE Dep. GTLI Cost
This wage type represents the group term life insurance premium costs for an employee's dependent.
/BD2 - EE Dep. GTLI Coverage
This wage type represents the group term life insurance coverage amount for an employee's dependent.
/BT1 - This wage type represents a group term life insurance premium
(employee's dependent) amount which is taxable.
Regards,
Manny

AddOn for a small Car and Life Insurance company, Policy management

Hi Everybody,
I am looking for an AddOn for a small Car and Life Insurance company.
I am interested in policy management
Do you know if there is any in the market?
Thanks

Hi,
You need to search SAP Business One Partner Solutions (Add-ons) forum and posted it there if you find none.
Thanks,
Gordon

Adding beneficiary to Optional Life insurance in ESS creating new record

Hi,
We have a insurance plan called Optional Life Insurance. IN the portal (ESS) when a employee adds a new beneficiary to this plan, system is creating a new pending record by delimiting the old record to end of that month. The problem is the newly created pending record is asking for EOI (evidence of Insurability).
Adding or deleting of beneficiaries in portal is resulting in EOI being asked. When the same process is done through GUI, there is no problem.
The EOI setting for action in IMG for this plan is "Create Pending record for desired option".
(But this setting is only for enrollment, this should not be reflected when beneficiary is added or deleted, right?)
Regards
Kiran.

Anyone faced such problem before? Any clues?
Thanks.

Want report to display Sales Life Cycle for Particular Sales Area

Hi all,
What are the select-options,parameters and tables for the report sales life cycle for a particular sales area and if possible send me the code for the same.
Thanks in advance
Santosh R

Hi Sandy,
You would probably be better to post this in Crystal Reports Design forum category.
You could add a unjion into the data source so that it always returns a dummy row for each category.
Regards
Alan

End of life status for JDK 1.1.8

I am currently using JDK 1.1.8-003, but I notice from the Sun website that they have begun the end of life process for this product and they will not be supporting it beyond October 09 2002.
I should be grateful for advice on which newer version of Sun Java I should download for future use.
Also, if I store the old and new versions in seperate folders am I likely to get a conflict between the two? Would my existing programs compile and run on the new version?
Thanks in anticipation Stankingston..

Same thing will happen to me, still using JDK 1.1.8.
Sure we have to look for new versions. I am sure that not all
existing programs will run under new versions. Same thing
happened when JDK 1.0 ran out. So several methods now
are deprecated. This is moving on...........
Look for the most suitable kits. It's your decision depending
of what you want to do in the future developing java programs.

Credit Life Insurance Fee on BB credit card charges since 2004

Wow, I am in awe that this has been charged to my account since 2004 even though I never authorized it.
I even called and had it cancelled in 2004 but I believe it gets added everytime you make a purchase at Best Buy.
It is currently at $600 a year.
I called today to get it cancelled again and requested I be reimbursed for all charges. I was told it has been cancelled and would get a letter in 30 days as to the status of my request. At this time, I will not be using the credit card ever again nor shop at Best Buy until this is resolved completely to my satisfaction.
I plan to complain to BBC, FTC and any other source I can to get reimbursed.
No other credit card I have does this to me. Granted, I do not look at my monthly statements for all my accounts, something caled TRUST that I grew up with.
{removed per forum guidelines}

Hello, brakford, and welcome to the forum,
Having the Credit Life Insurance program on your credit card can be truly helpful should you ever find yourself in an unexpected situation. I certainly would be furious to find I was paying for it for 11 years without my knowledge though, especially if I was under the impression it was cancelled long ago. I’m sorry to hear of the struggles you’ve encountered while trying to resolve this on your own.
Citibank, N.A. is the issuer of your My Best Buy credit card account. As such, we don’t have visibility into your account to see what might have happened. Having said this, I will be glad to share your inquiry with our Citibank contacts for further review. In order to do this, please know I’ve sent you a private message to gather some additional information. You may view it by logging into the forum and clicking on the envelope icon in the upper right-hand corner of the page.
Thank you for posting,

Does anyone have the problem of only one ear plug working on the life case for iPhone?

I have a life case for my iPhone...when I add my earphones to it, only one ear phone works...?

What troubleshooting steps have you taken?
Try these:
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

RSA3 data in R/3 and PSA data in BI are different values for same Doc No.

Hello BI experts,
I have a weird situation in BI. RSA3 and PSA are not reconciled for same Doc no.
Data Source: 0FI_AR_4 (enhanced in user exit with some custom fields as well)
Extracting data using Infopakcage in BI as a Init load into PSA.
The values in RSA3 in R/3
Doc No           Amount
1400003125      714.29
The values in PSA in BI
Doc No           Amount
1400003125     581.56
Anyone come across this situation. Any help would be greatly appreciated.
Thanks much,
Anil

1. yes selections are same in RSA3 and in Infopackage
2. Yes pulling all data records in RSA3. Thats only record exits for that doc#
3. Its not a delta, we are pulling in RSA3 all records and Initial load to PSA.
Thanks much,
Anil

Excise Invoice created twice for same billing document.

Hi All
Excise Invoice ( J1IIN ) has been created twice for same billing document in 1 or 2 cases.
How is this possible,if possible what is the config to restrict the same.
Thanks in advance
Samson

I dont think its possible to EI twice wrt: single billing document.
EI created wrt: Invoice which is created wrt: Delivery document. Then there will be only one material document with movement type 601. Through which qty will get updated in Rg1 register.
This document once utilized, cant used again.
re-check billing document, which billing document you are using & their settings in IMG.
Regards,
Reazuddin MD

Spouse life insurance for same *** spouse

Similar Messages

Maybe you are looking for