SPP - Unable to load data for numeric parts

Hi all,
We have been trying to upload data from a flat file for a set of numeric parts and have been unsuccessful in doing so. We get an error "No valid item to load into APO-BI". We have been successful in loading data for alphanumeric parts.
We suspected that this may be due to the output format for product number we specified in SPRO (not checked lexicographic). This has resulted in the system attaching leading zeros to the product number. The setting however cannot be changed once a numeric product has been created in the system. We were not able to delete the product (for which we started a separate thread).
Would appreciate if someone could share if there is a workaround to this problem ?
Best Regards
Mitesh

The Problem got resolved as we were able to delete the numeric part numbers and then checking the "lexicographic" option in "Specify Output format of Product Numbers".

Similar Messages

  • HT1386 When I try to sync my ipod it comes up with a message saying "iTunes was unable to load data class information from Sync Services. Reconnect or try again later". I have reconnected and tried later numerous times! Has anyone else had this problem?

    When I try to sync my iPod touch it comes up with a message saying "iTunes was unable to load data class information from Sync Services. Reconnect or try again later". I have reconnected and tried again later numerous times and it hasn't worked! Has anybody else had this problem and knows how to fix it??? Help me!

    Try here:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    If not successful see the previous discussion on the right side of this page with the green checkmark.

  • I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
    tt2

  • TS3297 "iTunes was unable to load data class information from Sync Services." What is this solution for the new phone to sync up with my iTunes acct?

    "iTunes was unable to load data class information from Sync Services." What is this solution for this new phone to sync up with my iTunes acct?

    Hi tadhunt,
    Here is an article that directly addresses that error message:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/ts2690
    I hope this helps!
    - Ari

  • Unable to load data / NullReferenceException only on certain tables when deployed

    I have a LightSwitch app that works fine when being debugged locally. But it has a strange issue when deployed as a Cloud Service to Azure. I have two Silverlight grid controls on the page which display a red x and give the error, "Unable to load data.
    Please check your network connection and try loading again."
    Several other queries are running on this page and correctly pull data from other tables in the database. The queries that run correctly are tied to label or text box controls.
    The queries that fail, return an HTTP Status code 500 (Internal error). If I try and pass the query to a constructor as an IVisualCollection,
    and I wrap the call in a Try block,
    the Inner Exception is "Object reference not set to an instance of an object." So, a Null Reference Exception. Checking for null before the constructor call and popping up a message box if the query was null as a means of debugging yielded nothing. I
    create these helpers all over. Only two are causing an issue and only when deployed. In addition, running the query in the Management Portal also completes fine.
    Try
    'Check for nulls
    If (Me.qQuoteByFirm Is Nothing) Then
    Me.ShowMessageBox("qQuoteByFirm", "Error", MessageBoxOption.Ok)
    End If
    If (Me.qQuoteByFirm.Screen Is Nothing) Then
    Me.ShowMessageBox("Screen", "Error", MessageBoxOption.Ok)
    End If
    If (New ModalWindowHelper(Me.qQuoteByFirm, "mwAddQuote", "Quote") Is Nothing) Then
    Me.ShowMessageBox("Modal", "Error", MessageBoxOption.Ok)
    End If
    'Create helper
    Me.HelperAddQuote = New ModalWindowHelper(Me.qQuoteByFirm, "mwAddQuote", "Quote")
    Catch ex As Exception
    Dim err As String = ""
    For Each item In ex.Data
    err = err & item.ToString()
    Next
    err = err & ex.InnerException.ToString() & vbCrLf & _
    ex.Message.ToString() & vbCrLf & _
    ex.StackTrace
    Me.ShowMessageBox(err, "Error", MessageBoxOption.Ok)
    End Try
    'Constructor
    Public Sub New(ByVal visualCollection As IVisualCollection, _
    ByVal dialogName As String, _
    Optional entityName As String = "")
    _collection = visualCollection
    _dialogName = dialogName
    _entityName = If(entityName <> "", entityName, _collection.Details.GetModel.ElementType.Name)
    _screen = _collection.Screen
    End Sub
    The actual construction of the queries does not seem to matter. I've tried several variations along with requesting the entire table. Same result. However, this only occurs on two specific tables. Grid controls displaying other tables on other screens work
    properly.
    Here's the weird part. If I comment out the call to the constructor, I can gain access to the gird control and add data to it even through the red box remains. If I refresh the grid control, the data disappears as if it wasn't saved or isn't there. But inspecting
    the table in SQL Azure Management Portal shows that the data was properly populated in the table.
    The app and the database are clearly connected and able to communicate fine. So why when reading from these two tables (but not writing to) are my grid controls throwing exceptions? Why does this only happen when deployed? What other techniques can I use to
    get more information?

    I am not very familiar with Lightswtich. But 500 is a server side error. Do you manually code the server side, or does Lightswitch automatically generates the server side code? If you manually coded, then please try to catch exceptions in
    your server side code. If the code is automatically generated, you may want to consult a Lightswitch forum on how to troubleshooting such issues. What's more, when you refresh the grid, what code are invoked? Try to check that piece of code and see if there're
    any problems, such as you reload the grid with empty data.

  • ITunes was unable to load data class information from Sync Services. Reconnect or try again later.

    Ever since I upgraded to iTunes 10.4 I've been getting this dreaded message on many occasions when I try to sync my iPhone 4 or iPad 2 with my Win 7 64 bit machine. "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." What happens is that local content (music, videos etc) will sync properly to my iPhone, but other content (such as Outlook information, MobileMe stuff, etc) will not.
    I have uninstalled and completely purged all Apple data from my PC (including hidden files and folders under Common Files and in the Registry) and reinstalled iTunes. Yet after one or two syncs, the same problem resurfaces. The other weird part is that the Sync Services crap-out message will happen after I do a successful sync, leave the iPhone connected to the PC, and don't even touch the computer for several hours.
    I've actually developed a very tedious work around that seems to restore syncing if for a short time.
    - Undock/unconnect all Apple devices from the PC.
    - Close iTunes, MobileMe control panel, and Safari (if you have it).
    - Start Task Manager (Ctrl + Alt + Del) and shut down iTunesHelper.exe and SyncServer.exe
    - Open up a Windows Explorer window (like My Computer) and under Tools, Folder Options, View, toggle on Show Hidden Files and toggle off Hide Protected Operating System FIles
    - In WIndows Explorer, navigate to "C:\Users\<your name>\App Data\Roaming\Apple Computer". Rename the folder Sync Services to something else, like Sync Services_Old.
    - In WIndows Explorere, navigate to "C:\Program Files (x86)\Common Files\Apple\Mobile Device Support" and double-click on AppleSyncNotifier.exe.
    - Go back to your Folder Options and turn off SHow Hidden Files and toggle on Hide Protected Operationg System Files
    Now you can start up iTunes again and connect your device. It should sync properly again (at least, until it doesn't once more).
    Does anyone at Apple have any idea about this error or a solution?

    I actually spent a fair amount of time on the phone with a senior Apple tech last week. He directed me to this topic:
    http://support.apple.com/kb/HT1923?viewlocale=en_US
    It's important that you go through the steps EXACTLY as described here and in the proper order. Also make sure MobileMe control panel is uninstalled (if you have it).
    Interestingly, when I went through this procedure and then reinstalled iTunes 10.4 64-bit  (didn't do MobileMe or Safari at this stage, but QT is automatically installed) everything worked perfectly. The aforementioned error messages disappeared and all is working flawlessly, as it should.
    I hope my expereince will help! Give it a try.

  • ITunes was unable to load data class information from Sync Services Issue

    Hi,
    Whenever I connect my iPhone 5 to my laptop (running Windows 7) I get 'iTunes was unable to load data class information from Sync Services. Reconnect or try again later'.
    Now I've had a look at all of the various Apple troubleshooting advice (and many threads on the discussion boards) for this and none of it works. I've also spent the best part of three hours tonight trying to remove iTunes completely off of my laptop using various programmes to try and remove all the little bits it leaves behind, but again to no avail.
    I've been having this issue for quite a while now and it first started occuring with my iPhone 4, so when the same issue occured with my 5, I figured it was an iTunes issue or something related instead of just a phone error.
    I decided that I wanted to sort it now as the last two iPhone software updates have errored and I've had to restore my phone and the back-ups have failed on both occasions so it's becomming quite a tiresome process now.
    Any other suggestions would be really useful as I'm starting to think I'm just going to have to start over with my laptop, which I'd rather not do as that would take forever!
    Cheers

    Sorry, I should have also said that I'm running the most recent iTunes software and that I can still actually sync my phone with iTunes.

  • Error on Desktop: iTunes unable to load data class information from sync services.

    Error on Desktop; iTunes unable to load data class information from sync services.

    Hi there Randall112,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/ts2690
    -Griff W. 

  • Unable to load data through outline load utility

    I am unable to load data by using outline load utility.
    Assigned Data load dimension as: Account
    Driver Dimension as : Period
    Driver member as : Jan
    Login file:
    Account,Jan,Point-of-View,Data Load Cube Name
    Investment,1234,"India,Current,Drat,FY13",Plan1
    Command at Outline utility
    OutlineLoad /A:pract /U:admin /I:C:\test1.csv /D:Account /L:C:\lg.log /X:C:\ex.exc
    Exception file
    [Thu Mar 28 18:05:39 GMT+05:30 2013] Error occurred loading data record 1: Investments,1234,"""India,Current,Draft,FY14""",Plan1
    [Thu Mar 28 18:05:39 GMT+05:30 2013] com.hyperion.planning.InvalidMemberException: The member India,Current,Draft,FY14 does not exist or you do not have access to it.
    [Thu Mar 28 18:05:40 GMT+05:30 2013]Planning Outline data store load process finished with exceptions: exceptions occured, examine the exception file for more information. 1 data record was read, 1 data record was processed, 0 were successfully loaded, 1 was rejected.
    Logfile:
    Successfully logged into "pract" application, Release 11.113, Adapter Interface Version 5, Workforce supported and not enabled, CapEx not supported and not enabled, CSS Version 3
    [Thu Mar 28 18:05:38 GMT+05:30 2013]Successfully located and opened input file "C:\load.csv".
    [Thu Mar 28 18:05:38 GMT+05:30 2013]Header record fields: Account, Jan, Point-of-View, Data Load Cube Name
    [Thu Mar 28 18:05:38 GMT+05:30 2013]Located and using "Account" dimension for loading data in "pract" application.
    [Thu Mar 28 18:05:40 GMT+05:30 2013]Load dimension "Account" has been unlocked successfully.
    [Thu Mar 28 18:05:40 GMT+05:30 2013]A cube refresh operation will not be performed.
    [Thu Mar 28 18:05:40 GMT+05:30 2013]Create security filters operation will not be performed.
    [Thu Mar 28 18:05:40 GMT+05:30 2013]Examine the Essbase log files for status if Essbase data was loaded.
    [Thu Mar 28 18:05:40 GMT+05:30 2013]Planning Outline data store load process finished with exceptions: exceptions occured, examine the exception file for more information. 1 data record was read, 1 data record was processed, 0 were successfully loaded, 1 was rejected.
    Infact those members exist in the Outline.
    Any help would be appreciated.

    Check for the double quotes (the one John mentioned). Also I can see that you are taking the approach of Data Load dimension. Is Data load dimension and driver members defined correctly in Planning?
    Regards
    Celvin
    http://www.orahyplabs.com
    Please mark the answers as helpful/correct if applicable

  • TS2529 iTunes was unable to load data class information from Sync Services. Reconnect or try again later is the error message I am getting when i connect my iphone 4 to my windows based computer. Any help out there?

    iTunes was unable to load data class information from Sync Services. Reconnect or try again later. This is the message when I try to connect my iphone 4 to my computer. If anyone could help me with this, I would appreciate it.

    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591

  • ITunes was unable to load data class information from sync services.

    I get the error message "iTunes was unable to load data class information from sync services. Reconnect or try again later" after reinstalling iTunes. I cancel the message and iTunes proceeds to sync with my iPhone 4. The phone and iTunes software are the latest releases. My PC is running Windows 8.1, which had to be reinstalled after the system crashed, requiring a total reinstall of all software.

    Doublechecking. You've tried the following document?
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • "Unable to load data" error after Windows update

    Hi all,
    I've been maintaining a LightSwitch desktop app for a couple of years now.  The app runs on a server and several client machines access it.  Sometime in the last few months, any client that has Windows Update enabled has failed to load data.  Instead
    it shows red crosses where the data should be and the tooltip, "Unable to load data. Please check your connection and try loading again."
    Other clients that don't have updates enabled are fine.  Has anyone else run into this issue?  Does anyone know how to resolve it?
    Thanks,
    Liam

    Hi Angie,
    Thanks for your reply.  I've enabled diagnostics as described.  Here's what I find.
    When I load my LightSwitch screen, I get the following entry highlighted red in Fiddler:
    GET http://127.0.0.1:6853/callback.json?_=1377245349573
    502 Fiddler - Connection Failed (text/html)
    GET http://127.0.0.1:6853/callback.json?_=1377245349573 HTTP/1.1
    Host: 127.0.0.1:6853
    Proxy-Connection: keep-alive
    Accept: application/json, text/javascript, */*; q=0.01
    User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/29.0.1547.57 Safari/537.36
    Accept-Encoding: gzip,deflate,sdch
    Accept-Language: en-GB,en;q=0.8
    HTTP/1.1 502 Fiddler - Connection Failed
    Date: Fri, 23 Aug 2013 08:09:10 GMT
    Content-Type: text/html; charset=UTF-8
    Connection: close
    Timestamp: 09:09:10.584
    [Fiddler] The socket connection to 127.0.0.1 failed. <br />ErrorCode: 10061. <br />No connection could be made because the target machine actively refused it 127.0.0.1:6853
    After that, I see a long list of each of the queries LightSwitch is calling for all the elements on the screen.  Each one contains the following error:
    HTTP/1.1 200 OK
    Cache-Control: no-cache
    Pragma: no-cache
    Content-Length: 747
    Content-Type: application/msbin1
    Expires: -1
    Server: Microsoft-IIS/7.5
    X-AspNet-Version: 4.0.30319
    X-Powered-By: ASP.NET
    Date: Fri, 23 Aug 2013 08:10:38 GMT
    @Fault5http://schemas.microsoft.com/ws/2005/05/envelope/none@Code@Value�Sender@Reason@Textxmllang�en-GB��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@Detail@DomainServiceFaultDomainServices i)http://www.w3.org/2001/XMLSchema-instance@ ErrorCode�@ErrorMessage��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@IsDomainException�
    Can you help in interpreting these?
    Thanks,
    Liam

  • When I connect my iphone4s to itunes on  my laptop I get this error...itunes was unable to load data class info from sync serv

    When I connect my iphone4s to itunes on  my laptop I get this error...itunes was unable to load data class info from sync serv

    In the course of your troubleshooting to date, have you worked through the following document?
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • Itunes-error "Itunes was unable to load data class information from sync services"

    Something is going wrong when ever i want to plug in my ipod-using itunes. It loads for like 5 minutes then a error message pops up saying "Itunes was unable to load data class from sync services. reconnect or try again later."
    Though it works when i restart the computer but i dont want to have to restart the computer everytime i want to sync my ipod to itunes.
    I have uninstalled itunes too and downloaded it again and still keeps doing this.

    OK.  Try this article:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690

  • "iTunes was unable to load data class information from Sync Services.  Reconnect or try again later." Can't sync w/ Contacts. iTunes delays/freezes when 3GS connected....

    Tried: uninstall/re-install of iTunes, iPhone restore, ran diagnostics, turned off firewall....even called Apple, no answers...

    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690

Maybe you are looking for

  • Install and configuration on the SharePoint server 2007 issue

    Hi All,            I have Microsoft Sharepoint 2007 on Windows 2003 and I am trying to Integrate Adobe Lifecycle Rights Management Server which is on Windows 2008 R2 server.           I am trying to Install and configuration on the SharePoint server

  • Print materials from Photoshop instead of Illustrator

    Hi all, I occasionally have to print signage, and usually  "design in Photoshop> import graphics into Illustrator> replace text in Illustrator> save as PDF". I just designed a 300dpi effects heavy image, and am wondering about the ability to save fro

  • How to default a value in the tablecontrol field?

    hi i have created a maintenance view for a z table and this table has a currency field. So when i go to SM30 to maintain the z table i want that when the user clicks on NEW ENTRIES button the system should automatically default the currency field to

  • Date convertion

    Hi,      I am getting date as mm/dd/yyyy to internal table. how to convert it to user formate. Thanks in advance, Sudheer.A

  • Change Master Page based on Text Content

    Hello, I have found a few examples relating to changing Master pages based on Style. However, I would like to change all Pages that flag "True" with the query of the "2-1134" to to "Master-C" for example. I have 12 master Pages with different strings