Spport of images in ipod notes folder

hi ...
I have a question regarding the support of images and videos in notes folder
Actually i am having some lecture notes from my university websites, which includes text decorated with some html tags, audio, images and videos..
in my ipod notes folder i placed a textfile of my lecture content (after deleting some tags which are not supported by ipod) and i linked audio files in that text file, which works well
But, now i want to embedd images , video also in my text files
my question is How could i insert or link images and videos into my text file ,so that it is visible and accessible on my ipod. Also to link these images and videos where should i store them in my ipod, i mean in which folder of ipod(in diskdrive mode)..
any help would be verymuch appreciated
Thanks,
Preetham

This might help you using PS within iPhoto:
Note: the tip was developed with PS C3 but should be essentially the same for C6).
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Screenshots are from PSE 10
Note 1: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
Note 2: editing a RAW file with either PSE or PS creates a new file which must be saved outside of iPhoto, i.e. the Desktop, and imported as a new photo into the iPhoto Library.

Similar Messages

Viewing videos in notes folder?

I would like to know if there is a way i can view videos in my ipods note folder. So i wont have to go back to my house and connect it to a certain computer to put files on it. Like putting them on its hard disk in the notes folder and the ipod could open and view them.
Windows XP

No.

Question about iPod Notes

First of all, let me say that I'm not very 'techie' so if this is a stupid or naive question...please bear with me.
My question is about iPod notes. It says you can only put plain text files in the notes folder, and yet it does not display the note in plain text (I believe the display's font is Helvetica). It also wraps earlier than at 80 characters like a .txt file should.
So basically...the note never looks the same on TextEdit (or whatever) as it does when you view it to your iPod.
I have been making a few eBooks to read on my iPod and -- just to make them look neater -- I would like to do a few things like centering titles, adding dividing lines, etc.
So I was hoping somebody could tell me how to set TextEdit (or whatever) so that a note will look the same on it as it does when viewed on the iPod so that I can edit the file. --Like, what is the exact font and size of the text on the iPod display and where does it wrap exactly (I figure it must wrap according to the size of the window, since a variable number of characters can go on a line w/ non-equal-spaced type).
Also...I figure that the file I edit would have to be a .rtf since the display is not in plain text, yet it says you can only put plain text files in the iPod notes folder. So...I suppose I would have to convert the file from .rtf to .txt before putting it into my notes folder...or can you put rtf. files in there after all?
Anyways...any help anybody out there can give me with this will be greatly appreciated. Thanks very much!

It says you can only put plain text files in the notes folder, and yet it does not display the note in plain text (I believe the display's font is Helvetica).
Plain text means it does not have any special coding/characters in it such as Bold or Underscores or page breaks.
Plain text docs do not store anything except text. It does not specify a font. That is taken care of by whatever app you are using.
I suppose I would have to convert the file from .rtf to .txt before putting it into my notes folder...or can you put rtf. files in there after all?
You can put rtf in the Notes folder but the iPod will ignore any of the formatting.
You can use some html to format a bit as well as linking to other files/songs/photos.
Go here -> Guided by iPod and click on *iPod Notes Feature Guide* at teh bottom for a doc explaining the notes.
There are a few apps and web pages to put text docs into the correct size files.
Here's one -> http://www.ipod-notes.com/ (I haven't used it so no idea if it's any good or not).

How do I move my notes in the "On My IPod Touch" folder to the "iCloud" folder?

How do I move my notes in the "On My IPod Touch" folder to the "iCloud" folder? I don't see where or how they are being backed up and want to make sure that they transfer to my new device.

Hi,
I will recommend you to get a Mobile Me account, it can sync multi devices like an iPod Touch / iPad / iPhone, of course, included your computer flawlessly.
For details, you can refer:
http://www.apple.com/mobileme/
If you not prefer to get a Mobile Me account, you can sync both devices by using computer.
First of all, make sure the iPod Touch have not been ever synced by other computer. Otherwise, all the notes and contacts in your iPod Touch will be replaced by your computer information. (or iTunes will ask you to merge all the info, some data lost may occur.)
Connect your iPod Touch to the computer, in the iTunes, your connected iPod Touch will be shown on the left column, select it, on the right hand side is showing your iPod Touch details. Then, select "Info" tab (on top), check "Sync Address Book Contacts" and "Sync notes" in the "Other" section. Then click "Sync"
Suppose the selected / checked option will be synced. After sync is complete, eject your iPod Touch, connect your iPad, do the same setting as you did for your iPod Touch, and sync it.
E.

HT2234 How do I save text into my iPod's Notes? I read the instructions and there is no Notes Folder in my iPod.

I would like to put texts into my iPod's Notes. I received instructions from Apple, BUT I'm totally lost. There is no Notes Folder in my iPod. ANYONE PLEASE HELP!

Hi Niel,
Create a folder like if it were a playlist folder? I'm so lost...create a folder where?

IPod Classic, can´t find the Notes folder on Finder in my Macbook

Hello friends!
I want to use my iPod as an external hard drive, I have the latest update, 1.3. The problem that I have is that I am not getting the Notes folder in my finder, can not even find my ipod on devices, I have a MacBook.
Can anybody help me?
Best regards,
Opalencia

Hello opalencia,
So you are saying your iPod is not recognized by your Mac or iTunes? If that's the case, have you had a chance to check out this Apple support document related to this document?
[iPod not recognized in iTunes and Mac desktop|http://support.apple.com/kb/TS1410]
If you are able to get iTunes to recognize the iPod, make sure "disk use" is enabled under the iPod's Summary tab. Once you have done that, you should be able to open up the iPod in Finder and navigate to the notes folder.
[Storing and reading notes with your iPod|http://support.apple.com/kb/HT2234]
Hope it helps.
B-rock

Locating "Notes" folder in 5th Gen iPod

I originally synced my 5th Gen iPod on a Windows machine. Now I'm on a Mac OS X 10.5.5. I have the latest version of iTunes.
When I plug my iPod into the computer it shows up as a device in iTunes. However, when I hit the arrow to look at the programs within in the iPod, I see "Photos" "Music" "Playlists" "Movies" etc. But I no longer see "Notes." It sort of vanished. I have my iTunes enabled for disk use.
Any help appreciated.

In response to the original poster, the Notes folder is on the Pod and you add notes by saving them as plain text and dragging them to the Notes folder directly on the iPod on the desktop, not thru iTunes.
If the iPod is not showing up on the desktop,s elect the iPod in iTunes then tick *Enable disk use*.

Help. Problems with iPod Notes.

I've got iPod Classic 160GB.
I wanted to view photos using Notes feature. When I uploaded some photos to Notes folder in iPod and previewed them, all of them were streched.
So I found out that photos are shown in 320x216 size, so I've tried to upload some photos that size.
Guess what - trying to preview most of those photos resets my iPod! How should I understand and fix this?
Just some of photos were opened and some says "Unable to view this image".

Given that the iPod Classic has a specific approach to photos, why use notes? It is probably a format that the Notes tool isn't expecting.
Just use the photo capability in iTunes and sync your photos to your iPod. You'll likely be much happier.

IPod Not being recognized with all the software updates

I've been without my iPod for a few weeks now and I desperately want it back. I dropped it a while back, and have come online to look up stuff to restore it, but none of that is working for me. I reset it by pressing "menu" and "Play" at the same time, then put it into disk mode by pressing the "ff" and "rwd" buttons together, but even in disk mode my computer is not recognizing it at all. The iPod screen says that it is in disk mode, and says it's okay to disconnect, but its not giving me the option to restore when I connect it to my computer and open the iPod updater.
It also gives me the file folder w/ an exclamation point whenever i don't put it into disk mode. And the few times that my computer does pick up something the iPod updater flashes a message that says "Can't Mount iPod" and then the updater manually closes itself. Anyone know what to do?
Thanks
20GB with Dock Connector Windows XP

For "Cant mount iPod" - please try the following first
Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
-- Right-Click on the iPod and select “change drive letter”
-- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
-- Safely eject the iPod
-- Reboot the PC
If still cant solve it then
The Sad iPods icon, clicking sound or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
Still can't see your iPod?
Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
3. Try to wait 30 minutes while iPod is charging.
4. Try another known-good FireWire or USB through Dock Connector cable.
5. Try another known-good FireWire or USB port on your computer .
6. Try to disconnect all devices from your computer's FireWire and USB ports.
7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
There are also some cases being reported that some unrecognized iPod being able to be erased with Linux, then reconnect the iPod with the original computer and do a Restore there.
8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
“Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
- I tried the 5in1 test and got and error on Firewire.
- I did the HDD R/W and surprisingly it passed.
- I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
10. Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
11. Put your iPod in disk mode and plug with a computer, and have a boot of your computer using the Mac OS or XP startup disks, hope that your iPod will be seen on Mac's Disk utility and allow you to do a Erase there. Or, under the XP, you will be able to find your iPod there for you to do a Restore.
But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Pictures and instructions of how to open the iPod case for battery replacement
http://www.kokopellimusic.us/KM_instructions.htm

IPOD Not being Recognised

After updating my Itunes software, my Ipod is now not recognised by ITunes!
I have been through all the suggestions, but to no avail!!!
On top of this I have lost all of my recordings on the Ipod, the only ones left are on the Itunes software on the computer, which doesnt communicate with Ipod!!
ANY IDEAS!

Sorry to reply again.. I found this on another post - would you recommend trying it? (I just feel uneasy about deleting the bin file - but if you think it's okay)...
"The recent iTunes update seems to have left many users iTunes installation from correctly detecting and synchronizing with their iPods. This problem seems to occur when the iPodService files are not updated when iTunes is updated to version 5.
Steps to resolve the problem:
1) Click "Start" | "Run..." | type in "net stop ipodservice"
| click "OK"
2) Delete the folder "C:\Program Files\iPod\bin"
3) Run the iTunesSetup.exe installer. It will probably prompt you to either "Repair" or "Remove" iTunes. Choose "Repair" and click on next or finish.
Optional Step 4) Click "Start" | "Run..." | type in "C:\progra~1\iPod\bin\ipodservice.exe /service"
| click "OK"
Optional Step 5) Restart Computer
If these steps do no resolve the problem, please dont flame me=X
This is not a problem with Windows XP but with the iTunes installer=)"
This was posted by "Phrehnck" in the Topic: FIX: iPod not detected by iTunes5/"iPod Service Error" post.
Thanks again..

3G Ipod not recognized by itunes (Windows XP)

Hi,
I've had a 3G ipod for about three years and it worked fine. About a month ago I plugged it in (into the USB port) and iTunes did not recognize it at all. iTunes froze up and my iPod did not appear in the left hand column. My computer somewhat recognizes it (only as a mass storage device) but when i try to open it via My Computer the window freezes. Internet Explorer and other programs work fine when the iPod is plugged in but iTunes and the iPod itself just freeze up.
I ran iPod diagnostics and the output file ended with:
"The iPod updater logging file cannot be found."
I tried putting it in disk mode but it didn't fix the problem either. Now when i plug in my iPod an "Autoplay" box pops up and after about two minutes it goes away, without really doing anything. This is one of the first iProblems i have not been able to fix since i got my iPod and i would really appreciate it if anyone could help me out.
Thanks alot,
NW2190

This may help some of you: my problem was that my PC did recognize my iPod, but my iTunes would not.
I have a 4th G iPod, and we installed iTunes 7 this past week on the family PC (a WinXP machine with latest Microsoft updates). Over the weekend, I loaded a few CDs into iTunes and made some corrections in the library info (fixing typos and mis-matched album cover art that iTunes 7 had "thought" we wanted).
Then, I tried to synch my iPod (4thG) to iTunes 7, but iTunes would not recognize the iPod. The PC recognized it just fine, but iTunes came up with a banner saying that iTunes 7 could not read the iPod, and telling me to "Restore" the iPod. My problem, though, was that the "resore" function is imbedded inside iTunes 7, creating a catch-22: I needed to restore the iPod to get iTunes to work with it, but I needed iTunes to work with it in order to do the restore.
After rebooting my PC several times and plugging and unplugging my USB connection for good measure, I had an idea: since my PC reconized the iPod, I would use Windows to help me. And it worked!!!!
Here's what I did:
1. Plug iPod into USB port on PC
2. Make sure iTunes is CLOSED
3. Go to "My Computer" in Windows
4. Select the iPod "drive" and Open the file list
5. Open the iPod Control folder (I forget what the folder actually was named, but it is a folder with about 5 or so small files that include things like "prefs" and "index")
6. Then DELETE all those files
7. Close out of "My Computer"
8. Disconnect iPod from the PC
9. Reconnect the iPod to the PC
As soon as I did that, iTunes soon opened, and it went right to the iPod options menu. I could then -- FINALLY -- choose "restore" in iTunes and start reloading my iPod again.
Hope this helps.

Include art board images in packaged Links folder

Is there a way to include the images placed on the art board in the packaged Links folder? Meaning include all the images when packaging not just the ones in the document.
Here's my weird workflow as well. Maybe someone could suggest a change that would improve the process.
1- designers lay out editorial features not knowing if the images will land on color or B/W pages (dont ask — I wish I could change this).
2- color images are placed in the layout but b/w versions are placed on the art board — directly left or right of the page containing the color version.
3- features can sit for days until ready for pagination.
4- production artists paginate the pages after ad-logs are complete.
5- images in editorial content are swapped, when needed, to b/w — placing the original color images onto the art board.
6- features are packaged for delivery to a web production team which copies and pastes the text and images into web templates.
6a- If color images are swapped for b/w during print pagination and the article packaged they will not be available for the web production department.
I have joined a stubborn team that I finally convinced to move from Quark 4... but they can not let go of this art board process. Any suggestions, comments or feedback is greatly appreciated.

mckayk_777 wrote:
Just a thought.
Increase the size of the sludge to include the images and see if they are taken when packaged then
I believe tha answer to that is no, but Packaging DOES pick up anything that touches the bleed area. This mans defining a large bleed gives you a lot of space on the pastebaord that will potentially be included in the package, but it also means that using the bleed guides and document bleed settings in the print and export dialogs is no longer valid, a small inconvenience since you can easily add a new set of ruler guides for the bleed and define bleed dimensions in the dialogs.
Or get REALLY sneaky and define the bleed as huge, then define the slug as the size you would use for the bleed. When you print or export, don't set a bleed, but include the slug area. The big downside to this is that the bleed area is included in the view when you fit spread or fit page in window.

Dreamweaver thinks my images are in a folder

I've set up a site with many images in the root folder. When
I drag an image to the page (also in the root folder, not a
sub-folder) the src box in the properties inspector has a slash in
front of the filename as though the image is in a sub-folder. For
example, if the image is named picture.jpg the src box in the
properties inspector reads /picture.jpg.
Does anybody know why this is happening? It's really annoying
because I have to erase the slash for every image in order for the
image to display in the browser.

Your site definition is set to use root relative links. Don't
panic. They
work. But they will not work in local preview UNLESS you have
enabled
PREFERENCES | Preview in Browser > Use temp files for
preview.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ss2104" <[email protected]> wrote in
message
news:gnmqqc$pjp$[email protected]..
> I've set up a site with many images in the root folder.
When I drag an
> image to
> the page (also in the root folder, not a sub-folder) the
src box in the
> properties inspector has a slash in front of the
filename as though the
> image
> is in a sub-folder. For example, if the image is named
picture.jpg the src
> box
> in the properties inspector reads /picture.jpg.
>
> Does anybody know why this is happening? It's really
annoying because I
> have
> to erase the slash for every image in order for the
image to display in
> the
> browser.
>

How to Copy an Image File from a Folder to another Folder

i face the problem of copying an image file from a folder to another folder by coding. i not really know which method to use so i need some reference about it. hope to get reply soon, thx :)

Try this code. Make an object of this class and call
copyTo method.
import java.io.*;
import java.net.*;
import java.util.*;
public class FileUtil
extends File {
public FileUtil(String pathname) throws
NullPointerException {
super(pathname);
public void copyTo(File dest) throws Exception {
File parent = dest.getParentFile();
parent.mkdirs();
FileInputStream in = new FileInputStream(this); //
Open the source file
FileOutputStream out = new FileOutputStream(dest); //
Open the destination file
byte[] buffer = new byte[4096]; // Create an input
buffer
int bytes_read;
while ( (bytes_read = in.read(buffer)) != -1) { //
Keep reading until the end
out.write(buffer, 0, bytes_read);
in.close(); // Close the file
out.close(); // Close the file
This is poor object-oriented design. Use derivation only when you have to override methods -- this is just
a static utility method hiding here.

I am new to Mac and am having trouble with uploading images from my pictures folder to Facebook and other share sites- some of my images are accessible while others are seemingly locked....

I am new to Mac and am having trouble up loafing images from my pictures folder to photography sites and Facebook. Some of the saved images are accessible, while others are not, ( they are light colored and cannot be uploaded) I am not saving them any differently.

Hi Robodisko,
Thanks for your prompt reply......
I often proof my work in preview then edit images in photoshop and rename from there. The dsc images are renamed to correlate the name of the class etc. i.e. dcs_001 is saved as the file name required 7A.jpeg etc.
The file names are required to correlate what is what and so on..........

Spport of images in ipod notes folder

Similar Messages

Maybe you are looking for