Spreads removed when Indesign files are posted to Cloud Storage for client review

Although my document is set up with facing page spreads in indesign, when I post it to my cloud for the client to review only single pages are shown. This is going to confuse matters for my client. Any suggestions as to how to solve this problem?

Send them a PDF showing spreads instead of using Creative Cloud previews. They are pretty lame. (They also currently don't show previews for InDesign CC 2014 files.)

Similar Messages

How do I set up InDesign cross-document Text Anchor Hyperlinks so that when the files are moved, they remain active?

I’m combining several InDesign files into one PDF, with several hundred text links across the different sections, as well as within each. The cross-document (section) Text Anchor Hyperlinks work fine in my workspace - but when I change the file location, they are no longer active (other links, bookmarks remain intact).
How do I set up InDesign cross-document Text Anchor Hyperlinks so that when the files are moved, they remain active?

They seem to be a lot of extra work, and I don't see what the additional benefit is. I have several hundred links to do. I would appreciate learning what the benefit is, as I don't mind the extra effort if it will deliver the desired results.

File corruption on SDCard when multiple files are being written from WinCE 6.0R3

We currently have file corruption problems which we have been able to reproduce on our system which uses WinCE 6.0R3. We have an SDCard in our system which is mounted as the root FS. When multiple files are being written to the file system we occasionally
see file corruption with data destined from one file, ending up in another file, or in another location in the same file. We have already written test SW that we have been able to use to reproduce the problem, and have worked with the SDCard vendor to
check that the memory controller on the card is not the source of the problems.
We know that the data we send to WriteFile() is correct, and that the data which eventually gets sent through the SDCard driver to the SD card is already corrupted.
We believe that the problem is somewhere in the microsoft private sources between the high level filesystem API calls and the low level device calls that get the data onto the HW.
We have confirmed that the cards that get corrupted are all good and this is not a case ofpoor quality flash memory in the cards. The same cards that fail under WinCE 6.0R3 never fail under the same types of testing on Windows, Mac OX, or linux. We
can hammer the cards with single files writes over and over, but as soon as multiple threads are writing multiple files it is only a matter of time before a corruption occurs.
One of the big problems is that we are using the sqlcompact DB for storing some data and this DB uses a cache which get's flushed on it's own schedule. Often the DB gets corrupted because other files are being written when the DB decides to flush.
So we can reproduce the error (with enough time), and we know that data into the windows CE stack of code is good, but it comes out to the SDcard driver corrupted. We have tried to minimize writes to the file system, but so far we have not found a
way to make sure only one file can be written at once. Is there a setting or an API call that we can make to force the OS into only allowing one file write at a time, or a way of seeing how the multiple files are managed in the private sources?
Thanks
Peter

All QFE's have been applied we are building the image so we have some control.
I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones. The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard. If the system used the same cluster to write the 2 files then that would explain the issue.

How to reference a set of Flash-protected f4v files in a manifest when the files are on Cloudfront?

I have: a self-created AMS 5.0 running on Amazon.
Using latest OSMF player.
I'm Using EZDRM for Flash Access protection.
I have a dynamic bitrate f4m created with the F4F packager. It contains data for three bitrates.
I know that my S3 bucket and Cloudfront distribution are generally working because I can play a set of non-drm files using a RTMP-style manifest
I am successfully issuing the license and playing the videos using that manifest when the files are located on the AMS itself.
The working call to the manifest is this: http://media.blah.com/vod/BlahBlah/Blah.f4m
I think the relevant portion of the manifest is this:
streamId="Blah-1000"
url="Blah-1000"
bitrate="1000"
bootstrapInfoId="bootstrap4543"
drmAdditionalHeaderId="drmMetadata8495"
I think the correct way to approach this it to leave the manifest on AMS and manually change the url in the manifest for each video file
I've tried changing the url in the manifest to point to the cloudfront location
http://blahblah.cloudfront.net/cfx/st/mp4:Blah
But I simply get back: "We are unable to connect to the content you requested."
Your guidance greatly appreciated.
Ken Florian

Hi,
I created a project (JDeveloper) with local xsd-files and tried to delete and recreate them in the structure pane with references to a version on the application server. After reopening the project I deployed it successfully to the bpel server. The process is working fine, but in the structure pane there is no information about any of the xsds anymore and the payload in the variables there is an exception (problem building schema).
How does bpel know where to look for the xsd-files and how does the mapping still work?
This cannot be the way to do it correctly. Do I have a chance to rework an existing project or do I have to rebuild it from scratch in order to have all the references right?
Thanks for any clue.
Bette

The words in the .docx (MSWord 2010) file are getting merged when the file is transferred to another computer for printing. What could be the reason?

The words in my .docx file are getting merged when the file is transferred to another computer for printing. For eg. the sentence "rate of success ......" is displayed as "rateof success" on the other computer. What could
be the reason for this? How to solve this issue?

Have you checked that the document is using the exact same font on both machines? If the second machine doesn't have the font installed that's used in the original document on the first machine, Word will pick the closest matching font, and that may
display slightly differently.

AppleScript to skip Automator workflow step - when no files are provided

My current Automator workflow:
Get Specified Finder Items (path to folder auto-populating with images from a camera)
Get Folder Contents
Sort Finder Items - by Creation Date in descending order (gets oldest item first)
Limit Number of Items - Limit to First 1 items
Move Finder Items (If no items are passed to this step skip it)
Loop - Automatically; Stop after 20 minutes; Use the original input
What I am trying to accomplish:
I'm trying to write an AppleScript to skip the "Move Finder Items action" when it is not supplied with any files (from the previous workflow step), moving on to the next step which is a loop to begin my workflow again.
Big picture:
I have a workflow, where I am moving files from one folder to another folder (one at a time). When the input folder is empty, Automator comes back with "No item references were passed to the Move Finder Items action (-50)"; which it should - because it is not passed any files. I would like to ignore this error (or skip this step) and continue with the workflow if no files are provided to the "Move Finder Items action". I currently have an AppleScript (see below) that stops the workflow when this error occurs, but I would like to have this flow continue, not stop.
AppleScript:
on run {input, parameters}
          if input is {} then error number -128 -- 'user cancelled'
          return input
end run
Please help me create a script to skip this step, or to restart the Automator workflow when no files are passed to the "Move Finder Items action".

I'm not aware of a way to do this with a workflow saved as an application, but Automator is scriptable, so you can manipulate a workflow document. For an example, build the follwing workflow:
Ask for Text (just to get some input)
Run AppleScript:
on run {input, parameters}
set currentAction to index of current action of front workflow -- the most recent completed action
if input is {} then -- if no input then disable the following action
    tell Automator action index (currentAction + 2) of front workflow to set enabled to false
else -- enable it
    tell Automator action index (currentAction + 2) of front workflow to set enabled to true
end if
return input
end run
Ask for Confirmation (just to show a dialog when enabled - this action will be enabled/disabled based on the text input)
Loop
You can also use action names, but I think it is less confusing to use indexes, since names can be edited and an action can be used more than once.

CS6 Indesign Files stored on Creative Cloud corrupt

I have not had any previous issues with opening Indesign files until today. Any file I try to open from my cloud folder generates a crash error. Paste bin screen shot below. All other Indesign files not in my cloud folder open correctly. Also I visited the creative cloud website and the file previews correctly. When I try to download a version from the site it only generates a null file that is not viewable.
Computer specs
iMac 3.2 GHZ Intel Core i5
Memory 16gb 1600 mhz ddr3
OS X 10.8.3.

You cannot attach screen shots. You must embed them using the camera icon onthe web page, like this:
And the actual crash report, posted on Pastebin.com with a link here, could be even more useful than a screen shot.

How the files are decreasing from RBS storage after some time i delete docs from document library, where shld I check the settings for this?

HI
I created a web application and configured rbs storage ,
I uploaded documents (for ex: 18 number)
after uploaded documents , and observed the RBS storage folder, number of files are increasing (39 number) , its working fine
and also I run the querys to check the rows increasing or not , (when I upload new doc rows are increased its fine also)
select count(*) from alldocs
Select count(*) from AllDocstreams
but when I delete some docs from document library ,
1)the doc itself deleted from document library
2)when I check the rbs storage there is no number of files are decreased(its still 39 files ), its same as before doc deleted from doc library
after some time I found the number of files are decreasing from RBS storage folder in sql server,
here I want to know the how the files are decreasing from RBS storage after some time, where shld I check the settings for this? and how I control on it
here how I know the settings for cleaning up orphan BLBOS how these deleted BLOB
adil

1. WHen you delete the file from Sharepoint, it is still present in Recycle bin. This is a default setting in sharepoint for 30 days. Once files are deleted fro Recycle bin, it can also be delete from RBS
2. There is a RBS cleanup job which deletes files from RBS. for more info check
http://mehuljamod.blogspot.in/2012/09/remote-blob-storage-maintainer-rbs.html

When importing files, my view window to search for files is really small, how do I make it bigger so I can actually search for files?

When importing files, my view window to search for files is really small, how do I make it bigger so I can actually search for files?

How big this is depends on the size of your screen. On a 13" it is really small. But you can improve things a bit. Click the green button to make the import window fill the screen.
Drag the area between the file list and the preview area up or down to increase one or the other:

How do I make sure the photos in my InDesign files are at a high resolution when I send those files to a coworker? (Keeping them as .indd)

I am leaving my job and we have been uploading all of my InDesign files onto Google Drive to prepare, so that my boss/coworkers can use and access my work. My boss has found that he can't download the files without the photos in the documents turning out super low-res. It's not just the display on his computer (although they do LOOK really awful); they also print in really low-res. I can print and view the SAME files in high-res when I'm working on my computer, and when I export the documents into a PDF, PNG, JPEG, etc., and THEN give him the files, they are at the appropriate resolution. Which has been all fine and dandy, but... Since I'm the only designer on staff, and I am leaving, I am going to need to be able to hand off my documents to my boss/coworkers. Help?!?!?! Thanks!

If you go to Window>Output>Preflight. It will show you what you are missing in your files.
You can also go to Window>Links. Find the picture in question and it will give you a status (?) if you are missing any image. At the bottom of that same Links panel you will see tiny icons that say Relink, Go to Link, Update, you can replace or find any that are missing.
To find out if your images are high res for print, you can go to Window>Info and select the pictures in question. It will give you an effect ppi when you click on your picture. If it's not at least 300 it's not high res.
After you fix all that, then package the file.

InDesign files are automatically copied when opening.

I'm using Creative Cloud InDesign CS6 on a mac. My current OS info is: OS X 10.8.3, 2.6 GHz Intel Core i7.
I'm trying to open files I've recently(within an hour) worked on. When I try open an InDesign file, a copy is automatically created and it's the copy that opens, not the original. I've tried double clicking to open, right clicking and then selecting open, opening the file from within InDesign, and the same thing continues to happen.
I can open the copy without a nother copy creating, but I don't want to have to go through the mess of sorting through all of these copies. What could be causing this?
The file highlighted in blue is the one I want to open, yet copies continue to automatically open when I try.

No. It wasn't checked. I've noticed that if I rename the file in the file folder(not within the program), it will let me open it without creating copies.

OS X Server 10.4.11 freezes when misc files are being accessed

This is an odd problem, to me at least. It seems as if I have some files that are getting corrupted, that then cause my 10.4.11 server to lock up when they're accessed. Has anyone else run into this problem before? This server is really only used for file sharing (AFP and SMB), and the majority of the users use AFP. It will lockup and not respond to AFP connection requests, won't allow VNC, and if I'm standing in front of it the mouse will move but it will not respond the mouse clicks or keyboard presses. However, I can still get a ping response.
I went through a month or so ago and removed all the problematic files I could find, but now the issue is back in a separate folder. To get the server to freeze, all I had to do was try any action on a bad file (copy, preview, open, etc). Disk Utility reports no permission errors, and the disk itself comes up clean. This is a Megaraid RAID setup if that makes any difference. Any insight on what could be causing these files to become corrupt, and then why they would cause a reboot?

I never did figure this out so I gave up and migrated to a new server while removing the "bad" files that I found along the way. Trying to copy the files when booted from the CD using Terminal would even lock up the machine.

PDF quality is degraded when InDesign file is reopened.

When I place PDF files in my InDesign document and print, or save to PDF immediately, the quality is great.
However, if I save the InDesign file and open it later, the PDF quality is much degraded. Too degraded to use.
I must make the document or book all over again.
Why does the PDF quality degrade when re-opening the InDesign?
HOW CAN I PREVENT THIS?
Thanks.

Regarding Peter's "be sure the link is up to date" because I was typing this after he posted:
Try placing a PDF into an ID doc, save the InDesign file, then reopen it. Select your placed file with the black selection tool, then go Window and select the Links panel. Looking at your linked image will tell you if InDesign can no longer find the image in the original location. (There'd be a yellow triangle with an exclamation point to indicate that the link is missing.) When you place your PDF into InDesign, a 72ppi preview of your linked file is saved in the INDD. In order to print, or export a good quality PDF, InDesign needs to be able to find the linked file.
So when you reopen, ID for some reason can't find the file. This could be caused by a wide variety of issues, but the most likely is that you moved either the InDesign file, or the linked PDF. Or perhaps your linked PDF is on an unavailable network drive? If you tell us more about your working environment, we might be able to figure out why the link is breaking.

Some CGM graphics do not appear when FrameMaker files are converted to PDF

CGM files are exported from ISO (Arbortext Isodraw 7.0 CadProcess) files. Then they are imported into Adobe FrameMaker 7.2, where all elements of the illustration are visible and can be printed. The FrameMaker FM file is converted to a PDF file using the Adobe PDF converter function of Frame. When the PDF file is opened by Adobe Acrobat 8,0 Professional, some, but not all of the illustrations in the file exhibit this problem (The callouts and other text may appear, but the lines, curves, etc. do not). The illustration prints the same way it appears on the screen. When exporting the ISO file as a CGM, the following selections are made.
When importing file into Frame, "Import by Reference" is selected.
When creating PDF in Frame, the following selections are made.
Any Suggestions would be greatly appreciated. Thanks very much.

Thanks, Michael.
I will give it a try.
Avox Systems Web Site: http://www.avoxsys.com
AVOX SYSTEMS
AIRCRAFT SYSTEMS
Rick Barusic
Senior Technical Writer
225 Erie Street - Lancaster, NY 14086 - USA
Tel: 716-686-1706
[email protected]
http://www.zodiacaerospace.com
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination, or other use of or
taking any action in reliance upon this information by persons or entities
other than the intended recipient is prohibited. If you received this in
error, please contact the sender and delete the material from any
computer.
From:   MichaelKazlow <[email protected]>
To:     rick barusic <[email protected]>
Date:   11/24/2010 10:32 PM
Subject:        Some CGM graphics do not appear when
FrameMakerfiles are converted to PDF
First you should update to the latest version of Acrobat 8, since you say
you are running Acrobat 8, you should update to 8.2.5. Update your
FrameMaker to 7.2p158. Those two steps might do the trick. If that fails
try using a different settings file. Perhaps High Quality or Press
Quality. I would never use Standard for anything where fidelity is
important.

Can I get a notice when the files are downloaded by the recipient? And other issues...

The older SendNow app notifies me by email whenever I have successfully sent a file, and another email when the recipient has downloaded the file.
With Adobe Send, I get only an email notice that the recipient has "viewed my shared files" which is kind of vague. I would like to know for certain that the client has actually downloaded the file. I know that I can log into the Acrobat site and "View Full Activity" for each file transfer, but it would be great to get an email notice or a text message.
I hate to say it, but I still feel like we have taken a step backwards with this app, compared to SendNow. It is nice that the recipient can preview the file before downloading it. That seems to be the only benefit so far that I can see. But not having a memorized email address book can make the process very tedious.
Another minor frustration: Whenever I log in to the Acrobat or SendNow site, there is a box that asks if I want to 'Stay signed in'. I click it every time since this is my own private computer, but I always have to log in anyway.
When the Adobe Send app first launched, I had problems with it failing. It was VERY frustrating because the status bar would seem normal until the very end before kicking out a fail notice. It happened mostly with larger files or with multiple files. So, I would wait a long time only to have to do it all over again. the entire process would fail. For example, if I sent six large files, and only one of the files was problematic, the entire transaction failed. The app would not identify the specific failed file. Why couldn't the app allow the good files to go through? I have no idea if this is resolved, but because of this, I have only used the SendNow app.
well, is anyone there??

Is working on FCE projects while all the video files are saved on an external drive a bad idea?
Not at all. This is the correct way to work with a laptop.

Spreads removed when Indesign files are posted to Cloud Storage for client review

Similar Messages

Maybe you are looking for