Spreads won't print properly...

I've never seen this one before. When sending double-page spreads to my Xerox DocuColor 242 in landscape mode, I get the first in the proper orientation but every spread after will rotate 90 degrees and get cut off the page. It doesn't matter if I begin printing on pg.1 or pg.10. The same thing occurs, first spread OK, all the following are rotated. This problem just appeared out of the blue. We also have a Xerox DocuColor 240 which does not have this problem. All existing files are affected, as well as any new test files. Only spreads are affected. Only CS2 is affected. All drivers as well as CS3 have been re-installed. Problem still there. My tech support is stumped!

There were a number of print-related problems with the Adobe apps on Intel Macs, and this sounds like it might be one of them.
Are you using an Intel machine? If so, have you updated InDesign to 5.0.2? If not, I would try that first...

Similar Messages

  • PDF won't print properly - some letters squeezed together

    Using a Mac and Reader 9 and two different laser printers (Canon and Brother). PDF won’t print text properly. Some letters are jammed / squeezed together. Last week I used Mac’s Preview Program / App to bypass the PDF print menu to get it to print the PDF properly but no luck today. How to fix?

    Printing as an image fixed the letter-jamming thing, thanks Michael. A new problem though.
    This is a 16 page booklet printed on 8.5x11. Each page is set at 5.5x8.5. I have made two PDF files:
    1) 16 individual pages 5.5x8.5 in portrait mode and
    2) 8 pages 8.5x11 in landscape mode with one page of the booklet on each half of the page (properly formatted to create a 16 page booklet). 
    The problem in using either one of these files are these:
    1) When I use the 16 individual page file and make a booklet under the print menu, it shrinks the combined pages to less than 8.5x11.
    2) When I try to print the 8 page file of an already formatted booklet, the image is the right size but the back of each sheet is printed upside-down.
    How do I fix either one of these problems, preferably both? All suggestions welcome.

  • My applet won't print properly

    I wrote an applet that draws a line graph based on parameters I feed it through <PARAM> tags. Those tages are written dynamically with Cold Fusion. It works perfectly, but what good is a graph if you can't have a copy of it? When I try to print the page with the applet running in it, nothing comes out. My computer is running Win98, IE 6.0 and proper printer drivers. The funny thing is I am able to print some of the demo applets that come with the JDK, but my own applet will not print. It can be printed from other computers around my office. I thought maybe it was IE 6 acting up so I tried Netscape 4.7, 6.0, and Opera 6.0 none of them can print my applet from my computer. I'm just worried that someone out there will have the same problem as me.
    The way I'm drawing the graphs is by overloading the default paint method of the applet. Like I said, it works fine on some computers, and a variety of web browsers, exept IE 6. I looked at the source code of the sample applets that WERE ABLE to print on my computer, I realized they extended the Canvas class, overloaded its paint method, then added the canvas to the applet's panel. I tried to mimic that with my applet and still no luck. I compile the sample applet and mimic the html sample page and then it won't print anymore. Any thoughts on what is going on?

    To print an applet in action make a
    SCREENSHOT!
    The online game players always do this to save screens.
    On WIN 98 it is: STRG+PAUSE I guess.
    Copy the screenshot to e.g. paint.exe and print.
    Hope this helps.

  • SwordfishExpress won't print properly

    My old standby SwordfishExpress (an app used to print post office shipping labels) was working fine under 10.5 but the print quality is terrible with snow leopard. I tried both an Epson and a Canon printer with updated drivers. It prints out so fuzzy that the bar code can't be read at the post office. Any ideas on how to make it work again? thanks

    I guess one workaround is to use SwordfishExpress on my old laptop which still has 10.5 on it, which I did today, but I'd sure like to find a way to get SwordfishExpress to print properly in Snow Leopard.

  • Excel doc created on PC, edited on my Mac, sent back to PC won't print properly.  Do I have to buy Microsoft office for Mac?

    I have to complete their Excel form, send back, they add to it, they want to print it and say it won't print as I see it.  I don't want to buy Microsoft office for Mac just for this... any ideas?

    Welcome to Apple Discussions
    A couple of ideas... when you exported the document did you check "do compatibility check" for Word? If not that's probably it. Other solutions: - OpenOffice, or NeoOffice play well with MS Word. Either of them are free downloads.

  • HELP! Images won't print properly!

    Hello,
    I am trying to print an InDesign CS4 document but when I convert it to a pdf and print it some of the images have lines through them and are half transparent. The rest are fine. I did not create this document so I am unsure of what process the individual photographs have gone through. I have checked preflight and it says no errors and has a green button.
    I cannot print directly from InDesign CS4 as it gives an error message on the printer..."can't create PictWPSDoc from `/private/var/spool/cups/d00062-001'.ERROR during execution of pictwpsto".
    Ideally I would like to solve both these issues but to be able to print the document either way would be great!
    Any help is much appreciated as I am getting desperate!
    daraclare

    Eugene Tyson wrote:
    It's do with your printer more than anything else, probably can't handle the file. Hard to know without knowing what printer you have?
    You printer (if a desktop out of the shop one) won't have very hi-res anyway, usually around 150 - 200 dpi.
    So you could probably print it as a bitmap and not see any difference in picture quality.
    Hold on there, Eugene. Printers today output in the range of 600 - 1200 DPI, but tend to use screen frequencies in the range of 100 LPI which means an image resolution at print size in the 150 to 200 PPI range is usually adequate.
    DaraClare2,
    I'm curious how this looks on screen with overprint preview turned on. Also, what version of ID are you using, and what formats are the images used?
    And expensive printers, especially from Xerox, are not immune to some quirks.

  • ExPressit won't print properly.

    My version of exPressit (3.0) no longer seems able to print any text properly. Every font comes out exactly the same, some very basic font, and the spacing is all over the place. I've verified all of the fonts in Font Book and also removed all the fonts from the users font folder. Makes no difference. The fonts are even wrong when you preview print on the screen. Can anyone help?? Also my Appleworks no longer starts, any suggestions.
    Message was edited by: Mudhut

    I thought I had figured this out - my inkjet was set to color printing and the text is black.  I changed to Black/grayscale and nothing printed.  Must be a printer issue as it prints normally on my laser printer.

  • Emailed links from updated web newspaper-reader won't print properly.

    I use an online newspaper-reader (attempts to mimic the actual look of the printed paper), and I sometimes email article links from it (either directly or via their "send to someone" function). While the links do lead to copies of the article which look fine -- just like the original -- on screen, they now truncate severely if printed -- including all photos. This also happens in IE, so it does not seem FF specific. The newspaper-reader's purported "support" is basically non-existent, so I was hoping one of the creative folks here could suggest a way to get these to print OK once again. I have included a sample link, though be aware that this may expire within 7 days (after which I would be happy to provide a new link if needed). Thanks!
    http://digital.olivesoftware.com/Olive/ODE/ColumbusDispatch/LandingPage/LandingPage.aspx?href=VENELzIwMTAvMDYvMjM.&pageno=MQ..&entity=QXIwMDEwMA..&view=ZW50aXR5
    == This happened ==
    Every time Firefox opened
    == Online newspaper-reader updated (???) their application

    Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
    -- cj

  • HP Photosmart 6510 won't print properly

    I have tried everything I can think of. I have replaced all the cartridges twice now! I have cleaned the printer head and tried aligning the catridges. It will not print black at all! I have no idea why. 

    Hi @ladybug41610,
    Welcome to the HP Forums! 
    I see that your HP Photosmart 6510 will not print in black, and I am happy to help!
    Please, see this guide, Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart 6510 e-All-in.... If the guide does not help, I would also recommend watching this video:
    If these steps do not resolve your issue, please call our phone support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Why won't my jewel case inserts print properly?

    Why won't my jewel case inserts print properly?

    That's exactly what's happening with me as well. Evidently a recent iTunes update caused the problem, which is with version 11.0.2.26. Since I asked my question I found a thread on the same topic that is six pages and started last December. Apparently Apple became aware of the problem initially, sent an update that fixed it, then updated again recently without the fix. Maybe they'll get around to fixing it again soon. Check out this thread. One guy posted a picture of exactly what we're talking about:
    https://discussions.apple.com/message/20528104?searchText=can't%20print%20cd%20j ewel%20case%20inserts#20528104

  • Won't print. All other functions work properly

    hp officejet 6500A Plus/Windows 7.  Won't print documents. No Error Message.  Window that displays documents being printed is empty.  All other functions: Scan; fax; copy work properly

    Please download and run the utility in the following link.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91799-1&cc=us&dlc=en&lc=en&...
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Print Apps won't print with C510a eStation. Prints thin line at top of page.

    My C510a eStation printer will not print using the Print Apps.  It just prints a thin line at top of page.  Everything works fine until I print.
    All other print functions work.  It prints from computer via WiFi.  It prints when I send an email to it.  It copies via the Zeen.  It just won't print using the Print Apps.
    Does anyone else have this problem?  What is the solution?
    12/23/2010 3:00PM.  I just got off the phone with an HP engineer.  She said that the eStation is still in the TESTING phase and to call to report problems so they can improve the product.  (I would have thought the product would have been fully tested before being released to the public!)
    She had me reset the Zeen display by holding down the volume keys while powering up.  This erased everything that had been done on the Zeen by me and resulted in no HOME screens, which will have to be set up by me.  The only app at the bottom of the blank home page was Yahoo!.  Even the printer app was missing.  I had to move it from the app tray to the home page.  Now, I have to spend hours, again, setting up the Zeen.
    After the reset, the printer apps seem to work now.  The Zeen will copy using the printer app.  My computer still seems able to print and scan to/from the eStation.
    The eStation C510a eStation printer and Zeen display are very exciting.  However, they are not for someone not willing to spend the time to get it to work properly.  If you have a cell phone, be prepared to use up a lot of minutes while on support.
    The HP engineer said that it will soon have a new release of Android operating on the Zeen which will allow it to be faster.
    This question was solved.
    View Solution.

    I have decided to return this printer to the store as it just has too many problems.  HP has essentially told me they will not issue updates to solve the problems.  I hate this, as I really loved the product.

  • HP LaserJet Pro 400 MFP M425dn won't print text at 72 point size or larger

    My workplace recently purchased an HP LaserJet Pro 400 MFP M425dn all-in-one printer. It works excellently with the exception of the fact that it won't print text that's 72 points or larger in size. I've tried numerous fonts that're pre-installed with Windows, and all of them print properly at point size 71.5 or smaller; anything else simply doesn't show up in prints. The content that's sized at 72 points or higher *does* affect the flow of other printed content on the page, however. It's like the 72-point or larger text is occupying space, but it's completely invisible on the printed page. I've tested this using Microsoft Word 2002 on three separate computers, two of which have Windows 7 installed and one of which has Windows Vista installed. The problem is identical on all three computers. The printer is connected via ethernet cable to our wired network. I've installed the included printer software, and I don't believe that there are any updates to it that weren't installed up to this point. Any thoughts on how to resolve this issue?

    hello, i only made an account to solve this for you guys because it has been a headache for me also.... let me apologize before hand for terrible grammar and punctuation i am in a huge hurry  Now this may not work for everybody but i fixed it on my machine with the following   now before you print ...use (ctrl+p) in your word processor to open the print window click on (properties) then navigate to the (advanced) tab now, I have a section called printer features under this category there is an option to "send truetype as bitmap" enable this and see if it can help any of you, for me, with this ENABLED I can print any size font my word processor will allow me to type  specs of my machinedell d6420win7msoft word 2007 printer itself is hp laserjet 200 color m276 printer driver is HP LaserJet 200 color MFP M276 PCL 6 i understand that this printer and driver is not identical to yours per se  but the nature of these drivers makes it highly likely that this solution will work for most of you  if this helps, have somebody else post it more noticeably because i will probly not be signing back in to this website i created this account just to post this and hopefully solve this annoying issue for many of you ...no kudos needed   

  • The black ink cartridge is not empty but won't print.

    On my Photosmart Plus B10, the black ink will not print.  I was using an HP size 564 XL cartridge and I could hear the ink in it, so it wasn't empty.  I cleaned the printhead and when that didn't work, I installed a new cartridge.  Still won't print.  The other three cartridges function properly.  Willl I need to replace my printer because of this problem? 

    Hi, is the printer in warranty? If not, one thing worth a shot is soaking the printhead as described below....
    1) Get a pan and put 1/2" of very hot (not boiling) water in the bottom.
    2) Next remove all the ink cartridges, then remove the printhead assembly.
    3) Gently put the printhead nozzles down in the water and let it soak for five minutes.
    4) Remove the printhead and gently dry the electrical contacts.
    5) Put the printhead back in the printer and then reinstall the ink cartridges.
    http://h30434.www3.hp.com/t5/Other-printing-questions/Photosmart-Premium-c309a-Black-prints-out-gree...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Mac won't boot properly unless in safe mode

    Recently I updated my MacBook Pro to OS  X Yosemite. I then started the process of the data encryption.
    I don't know what happened, but maybe the encryption failed, because now every time I turn my mac on, it won't boot properly unless it's in safe mode.
    Either it will have a black screen with a visible cursor, or just the desktop with no dock or the bar along the top and no icons, or it does boot up properly, but works extremely slowly. Like if I was to press the apple symbol on the top-right of the screen, it would take 5 minutes to actually open it. Nothing works properly.
    And so I opened up my system preferences, and discovered that the Encryption is stuck on half-finished. But I can't stop it. If I try to turn encryption off it says I have to wait till it's finished. But it never does, the progress bar never moves.
    If I open System Preferences while in Safe Mode, the progress bar for Encryption is grey, and underneath it says "connect to power to continue encryption". But it IS connected to power.
    Have I stuffed my Mac? Is there a way to get it working again?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for