Spreadsheet: cell grid won't print.

Downloaded Leopard 10.5.1. Now Appleworks spreadsheets won't print cell grid even though it is selected in the print window. Canon iP5000 printer has latest print driver installed that IS 10.5.1 compatible. Everything else prints fine, just not the cell grid. Canon reps say it must be an Apple problem at this point. Any suggestions? Is Leopard supporting AppleWorks or not? I haven't been able to find out for sure. If it isn't, then I can live with this anomaly.

Hi Hal,
Leopard itself does not 'support' AppleWorks (or any other Carbon application). Carbon applications run in Rosetta, which is included in Leopard.
A possible workaround for the cell boundary printing problem may be to 'print' to a PDF file, then print that to paper from Preview.
Two other maintenance steps that should be done after any installation may also help:
Use Disk Utility to Repair Permissions on your hard drive, and delete AppleWorks's preferences files. See my reply to consolata in the "I can't save an AppleWorks document" thread for more on deleting prefs.
Regards,
Barry

Similar Messages

Won't print cell grid

Using AW 6.2.9
all of a sudden the cell grids in spreadsheet won't print.
All the proper preferences are selected. Grid won't appear on Preview screen either. Would appreciate any hints.
Lou

Hi Lou,
I recall reading a post recently from Yvan Koenig regarding another printing problem. You might also try hiis suggestion, which was to open a new spreadsheet document, then drag the icon of the problem sheet onto the new one. Data and formulas from the original will be inserted into the new sheet, but the embedded print record will not.
I don't know whether it's appropriate to your issue, but it won't harm anything.
Regards,
Barry

Won't print all the horizontal grid lines

The printer won't print all my horizontal lines on a spreadsheet.

Do a print preview, and if the lines are missing in the preview, then it's the sreadsheet app, or setting in the spreadsheet. If the preview has the lines but not on the printout, it could be the printhead had a nozzle or two clogged, try "clean printhead" in the tools menu.

Numbers spreadsheet won't print in correctly in landscape from iCloud

I have a Numbers spreadsheet that needs to be printed in landscape to get all the columns to show. Doing this directly in Numbers works as expected and all columns show correctly. However, after it is shared onto iCloud and you attempt to print from there, selecting Landscape flips both the paper and text on the side basically giving the same result as Portrait. Can anyone else confirm this?
Thank you.

Hello Mannkm,
Welcome to the HP Support Forums! To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Remove grid lines when printing

I am trying to print a set of financial statements and do not want to see the grid lines when printing the final document. I cannot work out how to do this.
Some posts I have read say that grid lines are described as cell borders and suggest that they can be removed using the inspectors "cell borders " facility.
I have tried to do this but cannot make it happen. If I were to successfully remove the borders/grid lines then surely this would also remove the underlines I have inserted with great effort.
I would really appreciate anyone's help with this

One more time, it's useful to use our brain before stating a task.
If I read well, you used some cell borders as an underline segment.
Now you pay the result of a bad design.
You have no way to remove only borders which aren't "underlining" ones.
Next time think before and use the Underline text attribute so you will be able to remove the grid easily.
I know that some spreadsheets have two structures :
grid
borders
But, those which took time to read the User Guide know that in Numbers there is a single structure :
borders.
So, remove or hide grid means remove or hide borders.
When we work with a tool, we may ask it what it is designed to do, not what we guess it will be able to achieve.
Yvan KOENIG (VALLAURIS, France) mercredi 15 septembre 2010 20:51:51

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

Print Apps won't print with C510a eStation. Prints thin line at top of page.

My C510a eStation printer will not print using the Print Apps. It just prints a thin line at top of page. Everything works fine until I print.
All other print functions work. It prints from computer via WiFi. It prints when I send an email to it. It copies via the Zeen. It just won't print using the Print Apps.
Does anyone else have this problem? What is the solution?
12/23/2010 3:00PM. I just got off the phone with an HP engineer. She said that the eStation is still in the TESTING phase and to call to report problems so they can improve the product. (I would have thought the product would have been fully tested before being released to the public!)
She had me reset the Zeen display by holding down the volume keys while powering up. This erased everything that had been done on the Zeen by me and resulted in no HOME screens, which will have to be set up by me. The only app at the bottom of the blank home page was Yahoo!. Even the printer app was missing. I had to move it from the app tray to the home page. Now, I have to spend hours, again, setting up the Zeen.
After the reset, the printer apps seem to work now. The Zeen will copy using the printer app. My computer still seems able to print and scan to/from the eStation.
The eStation C510a eStation printer and Zeen display are very exciting. However, they are not for someone not willing to spend the time to get it to work properly. If you have a cell phone, be prepared to use up a lot of minutes while on support.
The HP engineer said that it will soon have a new release of Android operating on the Zeen which will allow it to be faster.
This question was solved.
View Solution.

I have decided to return this printer to the store as it just has too many problems. HP has essentially told me they will not issue updates to solve the problems. I hate this, as I really loved the product.

Trace won't print in xy graph

Hi all:
I'm using a panel as a report, it has a couple of numeric controls and
a XY Chart. I'm using the print.vi to print the panel but the traces
are not printed (even I see them on the screen). The graphs (borders,
grids, titles, etc.) and the other controls are printed correctly.
I've checked the support pages in ni.com and they had this problem
reported for version 5 and they describe that the upgrade to 5.1 fixed
that. I'm using version 6.0.2 and I have the same problem.
Does any body has an idea of what is happening?
Thanks all.

Rob Cole wrote in message news:<[email protected]>...
> What colour are the trace lines? I had a bit of a problem with that. I
> had to make the traces black and make the lines thicker (right click
> on the line in the trace legend). Seems that the default line width is
> so narrow that it might not show up (or barely show up) when printed.
> Give the thick, black line a try and see if it solves the problem.
>
> Rob
Thank you Rob for your response. The support guys from NI found what
happened. It seems that when you have the antialiased option turned on
in the trace, it won't print. Why? don't know but at least the problem
was solved.

Mac Mail won't print to Epson NX515

Mac Mail won't print to Epson NX515 - It worked fin until the last few days - contacted Epson and reinstalled drivers. Can print from Safari, Photoshop, Acrobat Pro, etc just not Mac Mail.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Mx860 won't print in black

Hi,
I have a MX860 printer and just in the last few days it won't print in black. I checked all my preference settings, did a deep nozzle clean, changed the large black print cartridge, did the test page and the black grid at the top didn't come in at all even though the rest of the colors did and did an alignment also. I'm thinking it's the print head but thought I would ask before purchasing a new one. Any help would greatly be appreciated.
Bubba888

Hi Bubba888,
If the black doesn't print after a few additional deep cleanings, you probably are dealing with a printhead issue. I recommend contacting us for all your available service options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Just purchased HP 8610 printer, but it won't print from my 8.1 windows computer

just purchased HP 8610 printer, installed it wirelessly to my network but it won't print from my 8.1 windows computer. I can print from my cell phone and I can print using the eprint function, but even though I can see it on the network I can't get it to print a document.

Hi,
Have you ilstalled it software and drivers on your computer yet ? Please download and run the following tool:
http://ftp.hp.com/pub/softlib/software12/COL50849/mp-136589-1/HPPSdr.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Label from word and excel won't print; everything else prints

my mg8220 printer all of a sudden won't print labels from word, it also won't print an excel spreadsheet, it used to do both! what has changed? it does print other files

Hi tking69!
Welcome to the Canon Forums and thank you for your post!
So that the Community can help you better, we will need to know if you're seeing any error messages and we also need to know which Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x). It's also helpful to know the way you connect to your printer (USB or networked via WiFi or Ethernet).
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone during normal business hours, or email anytime.
Thanks and have a great day!

Printer won't print too- need a new printer head. i want to know if you have one in stock

Hi, my printer won't print and the error message states "bad printerhead". My printer model is HP officejet d 155xi. I need to know how much it costs or would it be cheaper to buy a new printer. Still have four cartridges of ink. Please advise. Thanks.

HI,
You can find the General prices for the printheads HERE, if you only have to replace one its ok, but keep in mind that the other printhead are likely to be just as old and might break down as wel.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

I have an hp photosmart c7280 all-in-one series printer won't print. error message, system problem

I have an HP Photosmart All-in-One C7280 series printer/fax/copier/scanner. I have been having issues with printing for the past few weeks. It is a wireless printer, with a jack into the wall (for fax) and it is plugged into a power source. I never used to have issues with it before, but recently, it won't print when I send a document to it to print. It will print its configuration pages, reports, etc if I select them from the Printer's menu but not when I send a doc to it to print. First it was saying it was offline, but I figured out how to override that by operating as an administrator and selecting "Use Printer Online" from the dropdown menu when I right clicked on the printer from the control panel. But now it says "Error: Printer failed to print document. System error".
Noooo clue what to do now. This is the only color printer we have so we kind of need it to work. We bought this printer off the shelf at a office store (before I started working here) and so we don't have any designated technichians to work on it. I asked the guy who services our Image Runner Copier to look at it but he had no clue what was wrong with it. Hopefully someone can help?

goestherain,
I need to know what operating system you are using to helps narrow troubleshooting a bit, what OS are you running?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp deskjet 1510 series won't print

We mloved recently to la Gomera (Canarian isle) and there I bought a hp deskjet 1510. It won't print when connected to my lap top, also HP with Windows vista, although it is connected, is on, and is the default printer. I tried everything the print and scan doctor suggested (like switch off fire wall, chekc print ooler, remove and reinstall driver and software etc) and everything else I found in support from HP. it still does not print. When connected to our other lap top, also HP but with windows 7, it works fine. The only thing I managed to print is a diagnostic page but it give only numbers and letters like SN = CN39a19mmp05yr 21 PG =81 12 PER = -5yr 22 FB = 0/0 etc. Tjat does nog help me :-(. does anybody know how to solve this?
This question was solved.
View Solution.

Hello,
Please try the below mentioned steps..
Click START > Device and Printer > Add a Printer > Add a local printer >
( if the printer is connected with USB )
Select "Use Existing Port " then Virtual USB from drop down , Click NEXT, in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 6980 and complete the wizard
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Spreadsheet: cell grid won't print.

Similar Messages

Maybe you are looking for