Spreadsheet Operation request error!!!!!!

How can i avoid spreadsheet operation request error in data forms.
UAK

Hello,
This is an operation when someone validates or retrieve data. It occurs as well on a webform or on a smartview spreadsheet. You can only see it during the retrieve period.
There is one session per user connection. For example, a user has 5 smartview Excel sheets. If both are retrieved at the same time you will see 5 spreadsheet operation on your server sessions
Regards

Similar Messages

When I saved an Illustrator CS6 file to EPS format, I got "could not complete the requested operation. unknown error."

When I saved an Illustrator CS6 file to EPS format, I got "could not complete the requested operation. unknown error."
Google it and find some temp fix. run the illustrator by using "Run as admin" mode and fix the problem, but when use run as, can't see all the original user's mapping drives.
So still need it fixed.

It is win 7 64 bit system and same error on Illustrator x86 and x64.

An error was received while reading backup file- Cancelling Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).

Hi,
We have been getting the below error while restoring a database onto SQL Server 2008. We are using lite speed and performing a full restore. When we restart the server, the restore is completed cleanly but every 3 or 4 days once, the restore is failing.
We have tried everything from installing a patch that was supposed to fix it but it is not.
Error Message:
BackupIoRequest::ReportIoError: read failure on backup device 'VDI_7D17E958-2468-45A8-B7F0-EB73D0BF0F3A_3'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
The backup is getting validated successfully but failing while trying to read it. Any help would be greatly appreciated.
Thanks,
Sree

Hello,
I would try to get the latest update for the LiteSpeed software, based on the following thread:
http://www.red-gate.com/messageboard/viewtopic.php?t=5968
Please read the following article too:
http://troubleshootingsql.com/2011/02/09/troubleshooting-that-darn-backup-error/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application reque

hello,
i getting the following error message in event id while backing up my SQL db by third party backing tool
BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
<Data>995(The I/O operation has been aborted because of either a thread exit or an application request.)
please suggest the solution.

Hi pulkit,
According to your description, the actual error could be caused by but not limited to the following issues: Memory issues, Third Party issues, or SQL Server issues and so on. However, as shanky post, if you use an external or third party backup tool like
NetBackup, BackupExec, or one of the many other tools available for backing up SQL Server databases without having to write your own backup scripts, and the error occurs. You need to check if there are some issues about your VDI or SQLVDI.DLL. Meanwhile,
you also need to troubleshooting Memory Issue or the third tool issue. For more information about troubleshooting the error 995 when backing up database via the third party tool. You can review the following blog.
https://support.software.dell.com/kb/SOL14674
In addition, the error may include additional text from the operating system indicating that the disk is full. When performing a backup or restore operation with third-party backup software an additional message may occur indicating that the backup failed.
Perform the following tasks as appropriate:
1. Review the underlying system error messages and SQL Server error messages preceding this one to identify the cause of the failure.
2. Ensure that the backup and restore medium has sufficient space.
3. Correct any errors raised by third-party backup and restore software.
There is also detail about backing up database via T-SQL statement /GUI, you can review the following article.
http://technet.microsoft.com/en-us/library/ms187510.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

HTTP Request Error

Hi Iam using Flex to display pie chart in my application. Im
getting the pie chart in Mozilla firefox but in IE iam getting Http
Request Error. Iam giving the code what i wrote. Please find. can
anybody help me in this? thanks
mxml file
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" width="300" height="232" backgroundColor="white"
usePreloader="true">
<mx:Script>
<![CDATA[
import mx.messaging.channels.StreamingAMFChannel;
import mx.charts.series.LineSeries;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
import mx.controls.Alert;
import mx.controls.*;
import mx.events.*;
[Bindable]
public var orXmlList:XMLList;
[Bindable]
public var orXml:XML;
[Bindable]
public var orderCount:String = "0";
private function getOrXML():void{
orRPC.cancel();
orRPC.send();
public function handleXML(event:ResultEvent):void
orXml = event.result as XML;
orXmlList = event.result.orderResultsData.order as XMLList;
var orMetaString:String = "orMeta";
orderCount = orXml.orderResultsData[0].orMeta[0].orderCount;
public function handleFault(event:FaultEvent):void
Alert.show(event.fault.faultString, "Error");
]]>
</mx:Script>
<mx:HTTPService result="handleXML(event);"
fault="handleFault(event);" id="orRPC" resultFormat="e4x"
method="POST" url="/global/corpOrderResults.csc"
useProxy="true">
</mx:HTTPService>
<mx:PieChart x="0" y="46.95" id="orPieChart" width="168"
height="126" dataProvider="{orXmlList}"
creationComplete="getOrXML();" showDataTips="true">
<mx:series>
<mx:PieSeries nameField="name" field="count" />
</mx:series>
</mx:PieChart>
<mx:Legend dataProvider="{orPieChart}" x="141.25"
y="56.6" verticalGap="0"/>
<mx:Label id="orInfoLabel" x="0" y="20.95" text="Orders
updated in the last 30 days: {orderCount}" width="283.4"
height="18"/>
</mx:Application>
Text
And my JSp page is:
<div id="flashcontent">
</div>
<script type="text/javascript">
var so = new SWFObject("/global/flash/litigationByNoc.swf",
"mymovie", "400", "200", "8", "#336699");
so.write("flashcontent");
</script>

Hi,
I have checked the logs. I am getting errors like the below:
1.     com.sap.engine.services.servlets_jsp.server.deploy.impl.exceptions.WCEApplicationNotStartedException: The application [sap.com/com.sap.portal.ivs.iviewservice] is configured to have ALWAYS start up mode. Currently it is in STOPPED status - because of this it will not be started implicitly by the Web Container service and any internal operation that needed this application to be running will fail. There are two possible reasons for STOPPED status: 1) The application failed to start during cluster startup. 2) The application is stopped by system administrator.
2.     .info.exception.WD4VCRuntimeException: FAILED: process plan id: generatedBindPlan_CWG_UI action: null
3.     Thread HTTP Worker [2] failed to acquire exclusive lock on client session
But the data is being processed by the code correctly. I tried printing the final values of the o/p and the values are as expected.

HTTP Request error: 403 Client Error: Forbidden

Greetings -
I am trying to pull event data from blobs & tables storage using REST API built using python.
After running script, I am getting following error -
HTTP Request error: 403 Client Error: Forbidden
Could someone please advise me how to fix this.
Thank you

Hi Satish,
Would you be able to share some details about the error like the operation text?
You could refer the following link for details on the types of 403 errors and why they might occur:
http://azure.microsoft.com/en-in/documentation/articles/storage-monitoring-diagnosing-troubleshooting/#the-client-is-receiving-403-messages
Regards,
Malar.

ROUTINE AFPTPR CANNOT TERMINATE CONCURRENT REQUEST ERROR IN CONCURRENT MANA

제품 : AOL
작성날짜 : 2003-05-13
ROUTINE AFPTPR CANNOT TERMINATE CONCURRENT REQUEST ERROR IN CONCURRENT MANAGER LOG
==================================================================================
PURPOSE
Concurrent Manager log에 있는 error를 해결한다.
Problem Description
Concurrent Manager 가 이유없이 죽거나 하여 log를 살펴보니 log에 계속해서
다음과 같은 error message가 반복적으로 print 되어있다.
Atempting to Routine AFPTPR cannot terminate concurrent request
ID 1443445 with controlling manager ID 86576 and manager's operating system process ID 1185.
Workaround
none
Solution Description
1. 현재 떠있는 the concurrent manager process를 모두 내린다.
2. Apps User로 database에 접속 후 다음 SQL 문을 실행한다.
SQL> update fnd_concurrent_requests
set status_code='X', phase_code='C'
where request_id=1443445;
SQL> commit;
Reference Documents
150865.1

제품 : AOL
작성날짜 : 2003-05-13
ROUTINE AFPTPR CANNOT TERMINATE CONCURRENT REQUEST ERROR IN CONCURRENT MANAGER LOG
==================================================================================
PURPOSE
Concurrent Manager log에 있는 error를 해결한다.
Problem Description
Concurrent Manager 가 이유없이 죽거나 하여 log를 살펴보니 log에 계속해서
다음과 같은 error message가 반복적으로 print 되어있다.
Atempting to Routine AFPTPR cannot terminate concurrent request
ID 1443445 with controlling manager ID 86576 and manager's operating system process ID 1185.
Workaround
none
Solution Description
1. 현재 떠있는 the concurrent manager process를 모두 내린다.
2. Apps User로 database에 접속 후 다음 SQL 문을 실행한다.
SQL> update fnd_concurrent_requests
set status_code='X', phase_code='C'
where request_id=1443445;
SQL> commit;
Reference Documents
150865.1

Spreadsheet Operation Hangs and Cannot Be Terminated

My issue is twofold:
I am having Excel spreadsheet operations hang for several minutes, eventually users are terminating the operation themselves by closing Excel, however the request still lingers on the server. (Issue 1- why is this happening? this problem has affected various apps/dbs at various times of day, various users, i.e. no clear pattern. Sometimes we go for weeks and this doesn't happen. Instances are not associated with synchronization of security with Shared Services.)
Secondly, whether I kill the request in EAS or in MaxL, the request shows as "terminating" in EAS indefinitely. The database in question can still be logged into, but the original hang/termination just causes any user who queries subsequent to hang too/again. When I try to forcibly log off a user with a "terminating" request, I get a failure message "timeout while waiting for requests to die". (Issue 2 - why won't these hung requests terminate with a kill command? Would they ever terminate? Is there some kind of config file setting I am missing that is causing/contributing to hung sessions?)
Log files do not reveal any abnormalities upon user login, warnings or otherwise.
Thanks for reading this.
Version 9.3.1

Stepanie:
with the details what you have given me:
Check :
if the users are not doing mutiple instance of Excel book - this might have worked in legacy version but wont work in 9
Secondly
test the issue using smart view ideally you could advice the users to use the smart view and perform the operation and see if they still face the issue to isolate it to Essbase sever side or client related issue
Check on the users box if ARBOR PATH and ESSLANG are defined correctly
ESSLANG of the Server should match the client
Going by the Best practise and Hyperion Recommandation "Use the same version of addin against the version of server"
Can you isolate this to one particular DB/APPLICATION?
can we try to see if we remove the Existing Excel Addin then Reboot the box to clear the REGISTRY ENTRY and then install the latest 9.3.1.3 excel addin
TIP:
If you have a CSI Number that your company signed up for, Then use METALINK3 and search for latest version of Excel add for your Operating system Platform and install it
Else use http://edelivery.oracle.com
The latest one is 9.3.1.3 with Download Number V14763-01
I hope this helps
- Sriram Kalyanaraman

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you.

SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

Hi,
I am trying to figure out how to fix my problem
Error: Could not be opened. Operating system error code 5(Access is denied.)
Process Description:
Target Database Server Reside on different Server in the Network
SSIS Package runs from a Remote Server
SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
SSIS Package use variables to specified the share location of the files using UNC like this
\\server\files
Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
Below post it has almost the same situation:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

SSRS 2005 report: Cannot bulk load Operating system error code 5(Access is denied.)

I built a SSRS 2005 report, which calls a stored proc on SQL Server 2005. The proc contains following code:
CREATE TABLE #promo (promo VARCHAR(1000))
BULK
INSERT #promo
FROM '\\aseposretail\c$\nz\promo_names.txt'
WITH
--FIELDTERMINATOR = '',
ROWTERMINATOR = '\n'
SELECT * from #promo
It's ok when I manually execute the proc in SSMS.
When I try to run the report from BIDS I got following error:
*Cannot bulk load because the file "\aseposretail\c$\nz\promo_names.txt" could not be opened. Operating system error code 5(Access is denied.).*
Note: I have gooled a bit and see many questions on this but they are not relevant because I CAN run the code no problem in SSMS. It's the SSRS having the issue. I know little about the security of SSRS.

I'm having the same type of issue. I can bulk load the same file into the same table on the same server using the same login on one workstation, but not on another. I get this error:
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\\xxx\abc.txt" could not be opened. Operating system error code 5(Access is denied.).
I've checked SQL client versions and they are the same, I've also set the client connection to TCP/IP only in the SQL Server Configuration Manager. Still this one workstation is getting the error. Since the same login is being used on both workstations and it works on one but not the other, the issue is not a permissions issue. I can also have another user login into the bad workstation and have the bulk load fail, but when they log into their regular workstation it works fine. Any ideas on what the client configuration issue is? These are the version numbers for Management Studio:
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1132.00 (xpsp.080413-0852)
Microsoft MSXML 2.6 3.0 5.0 6.0
Microsoft Internet Explorer 6.0.2900.5512
Microsoft .NET Framework 2.0.50727.1433
Operating System 5.1.2600
Thanks,
MWise

HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

Bugs in BC CRM web service need to be fix (Server was unable to process request ERROR: A server error has occured)

I'm using the following code to retrieve order list is working fine but it give me an error Server was unable to process request ERROR: A server error has occurred when I trying to retrieve order total paid with same code: and the output when retrieve order total paid is [object Object]
var wsUrl = "https://mysite.worldsecuresystems.com/CatalystWebService/CatalystCRMWebservice.asmx?WSDL";
                      var RetrieveTotalPaidXML =
                      '<?xml version="1.0" encoding="utf-8"?>\
                      <soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" \
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">\
                      <soap12:Body>\
                      <Order_RetrieveTotalPaid xmlns="http://tempuri.org/CatalystDeveloperService/CatalystCRMWebservice">\
                      <username>user</username>\
                      <password>pass</password>\
                      <siteid>111222</siteid>\
                      <orderId>112345</orderId>\
                      </Order_RetrieveTotalPaid>\
                      </soap12:Body>\
                      </soap12:Envelope>';
                       $.ajax({
                        type: "POST",
                        url: wsUrl,
                        Host: "mysite.worldsecuresystems.com",
                        contentType: "application/soap+xml; charset=utf-8",
                        data: RetrieveTotalPaidXML,
                        dataType: "xml",
                        success: processSuccess,
                        error: function(){alert("Error: Something went wrong");}
                       function processSuccess(ResData) {
                       var RetrieveTotalPaidParse = $.parseXML(ResData);
                       var $xmlRetrieveTotalPaidParse = $(RetrieveTotalPaidParse);
                       var $Order_RetrieveTotalPaidResult = $xmlRetrieveTotalPaidParse.find('Order_RetrieveTotalPaidResult');
                               $Order_RetrieveTotalPaidResult = $(this).find('Order_RetrieveTotalPaidResult').text();
                               $('#RetrieveTotalPaidResult').text(Order_RetrieveTotalPaidResult);
I think there a bug in BC CRM Web Service when trying to make a request for Order_RetrieveTotalPaid using soap need to be fix

Perhaps it would be good to update the sample request as shown on the Developer reference page for this method (and, actually ALL of the SOAP samples)
The sample shows siteid (all lower case)

Error message is 'The Request Error : 400' with SAP Download Manager

Hello,
The authorization object SWDOWNLOAD (download software) is assigned to the My user ID.
But I could not download below that file.
SAP_ABA 710 (4~8)
SAP_BASIS 710 (4~8)
PI_BASIS 2006_1_710 (4~8)
SAP_BW 710 (4~8)
Error message is 'The Request Error : 400' with SAP Download Manager
I logged on to SAP Service Marketplace, software download area /swdc.
I have created objects in the download basket and have received approvals (->Maintenance-Optimizer) where required.
I start the SAP Download Manager and the objects from the download basket are visible in the object list of the program window.
After I choose "Objects for Download", the system starts the download.
In the info-line (in the lower part of the window), the system displays the message 'Processing object...' and then 'The request failed: 400'.

Hello,
In these cases the following things should be checked:
1.- Please be sure that you are using the latest Donwload Manager version
2.- S-User and password should be active
3.- Specify the proxy. Please refer to SAP Note 155954
4.- It might be that you are not licensed for the product you want to download.
If the checkings above are correct and the problem is still alive, I would recommend you to open an SAP customer message under component XX-SER-SAPSMP-SDM providing the following information:
1.- The exactly software product name and package or stack number you try to download.
2.- Attach to the message the results of the trace file generated as per note 574885:
574885 - Download Manager: Generate trace file for analysis
I hope this helps you.
Regards,
Blanca

2 probs! HDD Formatted and no recovery discs and "1962 NO Operating System" error message

Hi, I have had my Lenovo Idecentre B540 for approx 2 weeks now and my hard drive had to be formatted and windows reinstalled. However, this means the partition is lost and i had no recovery disc or drivers disc with it so have been unable to get the touchscreen working and probably missing out on all the features that were the reasons for buying this machine.
Running Windows 7 home premium and have downlaoded all the drivers from the support page on here but nothing there for the touch panel drivers and cant find it or ideatouch 4.5 online either.
I would like a disc sending to me or a link to be able to downlaod please.
Also now i have had
"1962 no operating system" error message when booting. ANy known reason for this? Lots of guesses online but no concrete answer.

You might look at this thread and you might also do a search: http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/LENOVO-IDEACENTRE-B540-ONE-KEY-RECOVERY...

Spreadsheet Operation request error!!!!!!

Similar Messages

Maybe you are looking for