Sprint Pre after 1.4.1.1 update launcher horizontal icon skew

My Sprint Pre after the 1.4.1.1 is experiencing icons being skewed by half their width sometimes when I bring it up. Check out the attached screen capture to see.  Anyone else seeing this?

Don't see this myself.  Might be related to one of the patches you have installed (perhaps the launcher pages one, since the hash marks indicate four pages of icons).

Similar Messages

  • Sprint Pre v1.4.5 IMAP type never stops trying to sync...

    My phone is a Sprint Pre running v1.4.5 (the problem also happened with v1.4.1).  The problem is this:
    My work uses MailEnable Enterprise as our email server and ever since I got my Pre, August '09, I have had an IMAP connection setup on my phone.  The settings that I used all this time were Get 7 Days of emails and get As They Arive.  It worked wonders until about a week ago.  It still gets my emails but it never seems to stop doing the sync function; meaning the little rotating circle status continues to run and run and run.  My battery now doesn't even last 1/2 a day.
    You will want to ask if anything has changed on my work's email server.  It has not.  I am the server administrator for my work.  No settings have been changed nor has there been any updates done to either the MailEnable software or the Windows Server 2008 R2 it runs on (I deliberately have Windows Updates turned off).
    Here is what I've done to test if it is my phone or the email server...
    I have had an email account setup for my wife on my work's system for over a year (though she rarely uses it).  I added both my email account and hers to her Pixi (also Sprint) and my Pre (deleting it and re-adding it on mine).  Her Pixi stops attempting the sync on both accounts while mine doesn't stop on either.  When I first had these problems, I thought it might have something to do with the many patches I had installed on my pre so I did a full erase on my phone and used WebOS Doctor (this was tried with v1.4.1 as 1.4.5 wasn't available at this time).  The problem still persisted.  I left my Pre homebrew free for days.  When 1.4.5 came out, I immediately downloaded it and installed it OTA on my Pre (still homebrew free).  It still didn't help.
    I did add both my wife's and I's email accounts to my Pre as POP3 just to see if it has something to do with the combination of IMAP and my work's email server.  POP3 worked great and I thought I could just use that, leaving it on 30 minutes or 1 hour check intervals.  After a few days of that, my battery life was better than when IMAP wouldn't stop syncing but it was no where near as good as when IMAP worked properly.  I have since decided I don't really want to use POP3.
    I even tried setting up my school email account on my phone to use IMAP instead of Exchange.  It too had the same problem on my phone; I tried it on my wife's and it didn't have a problem.
    I also tried seeing if it changed if I had WiFi turned on or off.  That didn't change anything.  I even put my phone on Airplane mode, thinking that would force the email program to stop refreshing; it didn't appear to change anything, my battery life was still draining faster than I've seen before and the status circle thing was still going around and around.
    I don't know how or why IMAP on my Pre is broken...  If it is a software related thing, I would have thought WebOS Doctor would have restored it back to working order.  If it is hardware, I would think all email communication would be having problems.  I have a half of mind of taking it to my local Sprint store and have it swapped out.
    Anyone out there have any ideas on something I can try?  I consider myself a pretty tech savy person so don't worry about going over my head too much.
    Post relates to: Pre p100eww (Sprint)

    I recently started to get Account Locked on gmail using IMAP. I solved this (fingers crossed) by deleting the IMAP account, changing the password, clearing the capture online when adding back the gmail account.
    This maybe related- one of the reasons Google list for IMAP account lock is over checking of email. I had mine set to "when email arrives" when I upgraded to v1.4.5.

  • After Flash Player 10.1 update, BitmapData copying no longer works?

    Hi,
    I recently updated to the 10.1 flash player. However, after the update - none of the application within which I'm using the BitmapData class (AS 2.0) work anymore. The source graphic loads fine, but the .draw procedure that used to work fine no longer works at all.
    I'm definately not alone on this issue, as a number of my colleagues in the office have reported the same behaviour. Once I uninstalled the 10.1 update and reinstalled an older version 9.x update, the BitmapData copying works fine again.
    Bit stumped on this one. Anyone else experiencing this issue?
    An example of one of the SWFs that use this facility is shown at the top of the page here (in the grey box area):
    http://www.southeastfarmmachinery.net/
    Here's a screengrab of the issue in question:
    I'm running Windows 7 (32bit), this issue seems to affect Flash Player in all browsers (tested in IE 7, IE 8, Firefox, I haven't got around to testing it in Chrome, Safari or Opera etc..).
    Any help would be appreciated, thanks!
    Andy

    Thanks for the reply, but I think the problem isn't as simple as you suggest.
    Firstly, I'm not sure why I would need to update my video drivers to the latest version, when clearly this functionality was working 100% correctly before the Flash Player update. And on this same note - what about the many devices that run OEM hardware (i.e. laptops) that have pre-baked drivers that are never updated? (Thanks, nVidia!)
    Secondly, I'm pretty surprised that the suggestion was made to disable hardware acceleration. Why would this be necessary? I  understand that Flash Player ties into the GPU for some tasks - but as far as I'm aware, the visuals we working in one version (presumably with the default hardware acceleration enabled), and now - they are not. Does this imply specific changes to the hardware acceleration code used in Flash? Or is it, as I suspect, a more serious problem with a fixed-bug that has unravelled another part of the player.
    The main issue I have here is that we now have many clients complaining that their flash clips we've made (that use similar functionality as that linked to above) no longer work - and they see the same white screen.
    I appreciate your insights here - but you must appreciate that we can't just start emailing all our clients saying, "Oh, by the way - can you go into 'x' control panel and disable your flash hardware acceleration, oh and whilst you're at it - download and install the latest video drivers for your machine.". They'd have a conniption - and we can't expect our clients to just do all of that for the sake of a mistake made by Adobe.
    You mentioned that this isn't the right forum for raising these specific issues - although I can see that mostly all bug issues seem to end up here. Would you be so kind as to point out where I should be posting this issue, so that I can bring it to the attention of the right people?
    I was hoping more people would notice this, but I appreciate that it's more of a developer-specific problem.
    Andy

  • No 3G connection on sprint network after IOS 7.0.2 upgrade.  Any fixes?

    Are there any know fixes for no longer having 3G connectivity on the Sprint network after IOS 7.0.2 upgrade?  Seems like the newest 7.0.3 update does not fix this issue.  Any help would be appreciated.

    Hi ernesto70,
    If you are having a No Service issue with your iPhone after a recent update, you may find the following article helpful:
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    Regards,
    - Brenden

  • Yahoo Messenger (Sprint Pre): No account button! only one Y! at a time?

    Hi,
    I have a Sprint Pre, and I have a Yahoo IM account set up in my Messaging application. Works great, tho sometimes it does take a long time to sign in or needs me to sign out then try signing back in for it to succeed in signing in.
    When I go to Accounts and Preferences, and go to the Add Account menu, I only see two buttons, one for adding a google account and one for adding an AIM account.
    I'm just checking: should I see an option to add a Yahoo IM account also? or does the fact that I already have one set up mean that I can't add another one, and the button not being there is a reflection of that?
    I'm a little nervous in case I ever had to delete the Yahoo IM account or if I ever have to re-setup the account. If I do, will that button be there again?

    Yahoo Messenger isn't natively supported on the Palm Pre/Pixi, and all signs point to it not ever happening. This is a known issue and has befuddled Palm users since the device came out. There is yet to be any work-arounds that I'm aware of.
    When you say "messaging application", what app are you using specifically?

  • After ios 8 update has anyones ipad started randomly selecting everything? Even after ios 8.0.1 update it has still continued to do the same thing.

    After ios 8 update has anyones ipad started randomly selecting everything? Even after ios 8.0.1 update it has still continued to do the same thing making it immpossible to use ipad anymore. Has anyone had the same problem and/or knows how to fix this?

    Try a Reboot pess & hold power button & menu button hold both down until you see Apple Logo you will not lose any data This may help but the ipad 2 is a bit under powered for iOS 8 If you can a very good buy now is the iPad Air 32G Since they brought the new one out the price for this model Has come down by £120.00 That's the one I am using and it works great on iOS 8.1 Bsydd uk

  • HP Envy dvd drive issues after the Windows 8.1 update

    I have a HP Envy and after the Windows 8.1 update the dvd drive is not working. I can see the drve but it is difficult to get the drive to open or recognise there is a disc in it. What can I do?

    Hello @Jenino,
    I understand that you are having issues with the Optical Drive on your HP ENVY 7 PC. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Why will airplay not work from my desktop to apple tv after I installed the new update?

    After I installed the new Updates to Itunes, I can no longer use airplay from my desktop to my Apple TV, it goes orange and says it does not work. Please help! They are both on the same network and Apple TV has been updated.

    Figured it out, you have to add a port!

  • After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

    After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
    == This happened ==
    Every time Firefox opened
    == FF updated to 3.6.6 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

    My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

    Start up in Safe Mode.
    http://support.apple.com/kb/ph14204
    Repair Disk    Section: "Try Disk Utility"
    http://support.apple.com/en-us/HT203176

  • Internet not connecting after ios 7.0.2 update on iphone 5

    Internet not connecting after ios 7.0.2 update on iphone 5

    Hi there PompasJr,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Camera isn't functioning
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    -Griff W.

  • I have an iPad 1 and after I got the latest update for keynote and Now  it crashes every time I try to open it

    I have an iPad 1 and after I got the latest update for keynote and Now  it crashes every time I try to open it

    Do you have iOS 5.1.1 on your original iPad? If not update the iOS.
    You might also try quitting the app and then reset the pad.
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    Still no joy? Delete the Keynote app, reset the iPad and then reinstall Keynote. You will not have to pay for downloading it again.

  • Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

    Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

    If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
    This should take all the music off your phone .Then you can resync the music back on to it.
    If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

  • Quicktime takes a lot of time to open after last Quicktime or iTunes update

    I have actually no big problems, but its a bit annoying that Quicktime Player takes a lot of time (maybe twice as before) for opening a Quicktime file (mp3 or video file, it doesnt matter).. I think this situation arised after the last Quicktime update or the update before this I dont know for sure. I think the last Quicktime update.. I am using the latest Quicktime which is 7.6 and its Tiger (10.4.11). When Quicktime Player is not opened, and its getting opened for the first time by clicking for instance on a mp3 file, it takes more then 10 seconds to open up, when I click the file Quicktime Player bounces normally as always but then the spinning rainbow beachball is shown for more then 10 seconds before the player window appears. There is no delay when I go open a mp3 from another mp3. The delay occurs only when Quicktime Player is not opened yet (quit/closed) and you click on a Quicktime file then the delay happens during the opening of the player.. Sometimes it doesnt even open the file I clicked, but only Quicktime Player so I have to click the same file again..
    What I tried is :
    deleted all Quicktime player preference files.. Didnt help
    removed all plugins from the Quicktime library.. Didnt help either
    What could the problem possibly be? What can I do to recover it except for installing my system all over again? Will Apple fix this problem with the next update?
    PS: I dont exclude that the latest iTunes update (8.1) can be a cause of this problem. Do you know if the iTunes update also changed/updated something regards Quicktime (Player)?

    Why is an Archive & Install not an option for you? It does NOT delete your applications or your settings, and is NOT the same as an Erase & Install which does.
    In my opinion it will be the only way to get your old G3 working properly again.
    How to Archive & Install:
    http://docs.info.apple.com/article.html?artnum=107120
    This document explains how to correctly reinstall a prior version of Mac OS X in the event that other troubleshooting does not resolve an issue:
    http://docs.info.apple.com/article.html?artnum=25404
    BUT: Don't install older versions of Mac OS than what comes with your computer:
    http://support.apple.com/kb/HT2186?viewlocale=en_US
    Will Apple fix this problem with the next update?
    For 99.9% of users there is no problem to fix.
    But before doing your archive and install, when did you last perform a bit of maintenance?
    Repairing permissions is important, and should always be carried out both before and after any software installation or update.
    Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
    In First Aid, click on Repair Permissions.
    This only takes a minute or two in Tiger, but much longer in Leopard.
    Background information here:
    http://docs.info.apple.com/article.html?artnum=25751
    and here:
    http://docs.info.apple.com/article.html?artnum=302672
    An article on troubleshooting Permissions can be found here:
    http://support.apple.com/kb/HT2963
    By the way, you can ignore any messages about SUID or ACL file permissions, as explained here:
    http://support.apple.com/kb/TS1448?viewlocale=en_US
    If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
    Once that is complete reboot again from your usual start-up disk.
    More useful reading here:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/TS1417?viewlocale=en_US

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

Maybe you are looking for