Sprint Treo 650 and .mac mail together as one?

I own a treo 650 and use Sprint as a cell provider. I have a .mac account that I use for email. I am not recieving my email on my treo 650 unless I manually click on my VersaMail button. My emails will then download but I am unable to respond to any of them or send an email via my 650. Here is my Account Setup:
Account Name: my name
mail Service: Apple.Mac
Protocol: POP
NEXT
Username: my .mac email account
Password: my .mac email account password
NEXT
email address: my .mac email account
Incoming Mail Server: mail.mac.com
outgoing Mail Server: smtp.mac.com
NEXT
ADVANCED:
Incoming Server Settings:
Port Number: 110
unmarked: use secure connection (SSL)
unmarked: use authentication (APOP)
Outgoing Server Settings:
Port Number: 587
unmarked: use secure connection (SSL)
unmarked: use authentication (ESMTP)
Anyone else have a SPRINT account that will work with their .mac account?

Hi I am also super frustrated with this on my phone. Mac user, Sprint and I can get mail but cannot send. Have any of you found a solution?
Thanks so much!

Similar Messages

Sprint Treo 650 connection with Apple Powerbook G4 867 MHz runing 10.4.6 ??

I am trying to use my Sprint Treo 650 as a modem with the Apple Powerbook laptop running the latest version of Tiger.
The old Treo 600 worked just fine using the laptop with 10.3.7.
But the old 600 died and I was forced to purchase a 650.
The Treo 650 manual says its possible to use the Treo 650 as a modem. The Apple manual says its possible to use a mobile phone as a modem.
I have actually gotten to the point where, after inserting "passords" like 654379 on my Treo after they were issued by the Apple. I've been told:
"Congratulations, you are connected"
They lie to me.
I've read about "hacks" for the TREO and the need to install special scripts. The instructions go for 26 written pages.
Is there not an easier way? These are the kind of things that make me not even want to visit the Apple Store ever again.
And I love my Apples!
Thanks for letting me vent.
Power Mac G4 Mac OS X (10.4.6)

Don't know if it makes a difference (I don't think it does), but I have no problem connecting Treo 650 (Sprint Vision service) to my MBP 10.4.6 as a wireless modem. Make sure that you have the latest firmware on Treo 650 that enables DUN (Dial Up Network) on BT pref.
I just simply used the OSX BT setup, making sure that my 650 is discoverable and with a code (paired) for security. It is also using 650 serial port as RS232 port.
Connecting to 650 is done through Network connection on system Pref or via Airport menu. Under BT, configure as Other, the number to dail is #777 with account name and password to your Sprint Vision account (not your Sprint main account login or pw). It should be something like [email protected] for account name and corresponding password for that.
I think this is all you need to do. Did not use any hacks (in fact I completely stay away from Hacks - I have simple needs and want to keep things simple).
You'll have to probably try few times to get it all right and connect but it should not be too bad.
Hope this helps
Good luck....

How do i restore synching between Treo 650 and iCal & Address Book

prior to installing 10.4.7, i was able to sync my treo 650 with iCal and Address Book; iCal and Address Book syncs with .Mac and Entourage; Entourage syncs with Outlook on my office pc; and Outlook syncs with my Blackberry 8700. therefore, all i needed to do was enter an appointment or a contact in one device, and all the three other devices would be in sync.
i recently upgraded to 10.4.7 and now, i have problems synching: (1) iCal and Address Book can no longer sync with my treo 650, and (2) iCal and Address Book can't sync with Entourage either.
after installing 10.4.7, i noticed that my treo 650 cant sync with iCal and Address Book. i always get the error "isync conduit synchronization failed. ( the first time it happened, i checked isync, and i noticed that "enable palm os synching" was unchecked, so i enabled palm os synching. after that, i was able to sync my palm, but for one time only. after that, i couldnt sync anymore.)
at the same time, i noticed that iCal and Address Book wouldnt sync with Entourage anymore.
i also noticed that iCal starts-up even if i dont activate it. when iCal starts-up, the beach ball spins for around two minutes before it responds; if i click an entry to edit it, the beach ball would likewise spin for a minute or two before i can edit it. i went through all the entries and noticed that some have multiple alarm entries: i deleted these and iCal no longer slows down.
however, whenever i launch Entourage or iSync, iCal also launches. unfortunately, no synchronization takes place.
can somebody help? how do i restore synching between my treo 650 and iCal & Address Book? how do i restore synching with Entourage? thanks.

Bon asis,
I have the exact same situation. Sorry this doesn't help, but wanted you to know that someone else is in the same exact boat.
Jim

Downloading of emails via webmail, iPhone and Mac Mail

I currently access emails from my ISP via three avenues. I use webmail when I'm in the office, iPhone on the go and Mac Mail at home. However, I will end up seeing the same emails three times. Even after deleting unwanted emails from my webmail, they will still appear in iPhone and Mac Mail when I access emails and vice versa. Has this anything to do with the POP or IMAP settings? I have set my ISP email on iPhone and Mac Mail under POP. I have ever tried to change the POP to IMAP with same results.
Any advice? Thanks.

I am having the same issue.

TS3276 Having trouble sending jpeg images as attachments in Mac email.....they go thru as images and PC users can't see the SAVE or QUICK LOOK boxes that Mac mail has. One friend scrolled over the image, right clicked on it and saved as a PNG file.

Having trouble sending jpeg images as attachments in Mac email.....they go thru as images and PC users can't see the SAVE or QUICK LOOK boxes that Mac mail has. One friend scrolled over the image, right clicked on it and saved as a PNG file.

Apple Mail isn't going to change the format of any of your attachments. it isn't going to corrupt them either.
Exchange is a transport protocol and server. The issue you describe is not related to Exchange.
There are many different versions of Microsoft Outlook in use and they all have e-mail bugs. Different versions have different bugs. Some Apple Mail hack to get around a bug in Outlook 2003 may cause the same message to be problematic in Outlook 2000. Fix them both and another issue will cause trouble in Outlook 2007. You can't fix this. Apple can't fix this. Microsoft can and has but that is irrelevant if your recipients are using older versions.
One specific problem is that Apple Mail always sends image attachments inline, as images, not as iconized files. You can change this with Attachment Tamer. Just be aware that use of this software will break other things such as Stationery. E-mail is just a disaster. To date, no one outside of Apple has ever implemented the e-mail standards from 1993. Apple has continually changed its e-mail software to be more compatible with the de-facto standards that Netscape and Microsoft have unilaterally defined and people documented as "standards" after the fact. The e-mail messages that Apple Mail sends are 100% correct and do not violate any of the original standards from 1993 or the Microsoft/Netscape modifications. The problem is entirely bugs and limitations in various versions of Outlook.

Outlook and mac mail client attachements freeze, skype freeze

Hi all,
I am working in a company that many users have Macbooks Air and Pro. One specific user with a a Macbook air that has a clean install of Yosemite (not even a week ) started to have problems with the mac mail client attachements. Every time he tried to insert a file the mail client frozen and had to force quit. After a while i observe the same issue on Outlook mail client. At last after a reboot that he did to see if that gonna solve the problem then Skype started to freeze also and had to quit every time. So now, so far none of the above apps work as expected and the Skype doesn't work at all. It has to be noted here that we did the upgrade from Mavericks to Yosemite to solve the Skype issue that he had also for a couple months now and it wasn't resolved from Skype's support team( never answered). So for now we have again the same problem and and with a fresh install of Yosemite i am started to thinking about hardware issues or even broken drivers, code to Yosemite etc. The laptop has an encrypted SSD using Filevault, SEP, Office and Acrobat Reader nothing else.
Any thoughts to solve this issue?

Hi Brody,
Thank you for your answer, yes i did erase the hard drive and install Yosemite!! After a second call that i made with my client he said that first of all:
The problems of the Outlook and mac mail client attachements freeze started after he install Cisco VPN Anyconnect (I don't think that this has to do anything with the freezing) so he tried to remove this using Appcleaner. After this not only the Outlook and mac mail client attachements freeze problem was remaining but he saw that skype started to freeze also. No matter how many uninstall and install he made to the Skype, Skype continues to freeze. For the mail freeze i advise him to use the verify/repair disk permissions and so far that one solved. The remaining problem is the Skype Freeze so far. I also tried to remove the Skype following this https://support.skype.com/en/faq/FA12073/how-can-i-completely-uninstall-and-then -reinstall-skype-for-mac-os-x
so to avoid Appcleaner and still the problem persist even with older versions of Skype. I also create another profile account in Yosemite and Skype seemed to played well there. But i would need to solve in his account so to avoid any file transfer. Do you have any idea why that happened? Is it a file permissions problem? Corrupt/missing files in users profile? This one problem had in the past as i wrote in the previous comment and couldn't work at that time.
Any thought on that? What could be wrong?
Thanks

My Safari, Address Book and Mac Mail have stopped working.

Recently my Safari, Address book and Mac Mail have become unstable, I cannot edit or copy anything from my Address book, most of the time it'll stop responding before I can even view an address. My Safari keeps freezing and then crashing and I have to force quit, sometimes several times before it'll close. The Mac Mail won't do anything, it tries to download mail and then will sit there doing nothing, again sometimes I have to force quit several times before it'll actually quit.
I have run the extended hardware test and all is fine, I have reinstalled my OS and then restored my info from a backup and still it doesn't work. Can anyone shed any light on this?

Hi jen_bob,
My iMac is a trooper, so far this is the first time its played up - I have I pushed it too far?
I think you've just installed the wrong version of Safari, that's all. Safari 3.x is supposed to be for OS X 10.4 or 10.5 - according to your tag line you are using 10.3.9.
Assuming you are using 10.3.9, then the Safari install will have updated a few system frameworks that are used by other applications (such as Mail). In that case, the 'easiest' way to get things working again is to do an 'Archive & Install' and choose to preserve users and network settings.
http://support.apple.com/kb/HT1710

ICal and iSync with Treo 650 and bluetoothing

Hello,
I have a Palm Treo 650 with Sprint provider and I am trying to sync it with my iCal and Address Book on my MacBook Pro. I have synced the Treo with the laptop using the Cradle Cable once. When I did this, all the events from the Treo transfered straight over the Mac Pro but were deleted off the phone.
1) How do I sync the two to have identical events, etc.?
I have heard that my iCal can also be synced using bluetooth. I've been reading on here trying to figure it out but nothing has been able to help me yet.
2) How do I sync using the bluetooth capabilities?
I just signed up for a .Mac trial account to see if I had to be a member for the iCal to sync thru bluetooth but I haven't been able to figure it out. I have the Palm OS conduit installed. But I just need help answering these 2 questions if possible.
Much appreciated!
"locmi01" I have read a few of your posts but nothing that I found could answer my questions.

I cannot explain why the events transfered from your Treo through the Sync Services framework where thereafter deleted if you were using iSync and the iSync Palm Conduit. That should not have happened.
In order understand synchronization under Mac OS X 10.4 and later, you should read this document:
http://developer.apple.com/macosx/syncservices.html
To restore the data to your Treo, you should first make sure it is present in both iCal and the Address Book, back up both datasets using the option to do so under the File menu of each application, then…
• launch iSync
• open the Preferences… dialog
• press the Reset Sync History… button and follow the directions which appear
You should opt to replace the information on your Treo when presented with the option to either merge or replace records.
With regard to Bluetooth synchronization, you must first get USB synchronization working properly. Only then should you pair your device initiating the process from your Treo and confirming it from your MacBook, then electing to initiate a HotSync Bluetooth sync session from your device.
Keep in mind that USB is a faster and wider path, and will result in faster, if not necessarily as convenient, synchronization.

Sprint Treo 650 resets when trying to activate

I broke my centro and now I'm borrowing a treo 650 from a family member but can't seem to get to activate it with my account. Whenever I try to turn on the phone it stays frozen on Network Search for a few mintues and then it just says that the phone is off. And every time I put in the secondary activation code, the phone just brings up the Sprint welcome screen and then resets. I've tried soft and hard resets, the CDMA updater, and walking around outside while turning on the radio.
If it helps, under phone info the Phone Number, PCS vision username, ESN, PRL Rev, and PRI checksum are blank.
Post relates to: Centro (Sprint)

If you did a soft and the almighty hard reset then there's really nothing much that you can do except sending it for repair. Although the repair cost will roughly equal the **same amount** as purchasing a new Centro.
The next step that I recommend doing would be to take it to a Sprint store and having a Sprint Rep. inspect the device.

ISync, Palm Treo 650, and my sanity

Just bought a Palm Treo 650 this evening and I'm having the hardest time.
Been trying to iSync via USB with mixed luck. I installed the software that came with the phone, made sure my HotSync settings were correct, and hit the Hotsync button on the USB cable.
Nothing happened for several tries. Was as if the cable was broken as the Palm just couldn't contact the computer and would eventually time out.
Then when I used the AC adapter along with the USB I got a different result. The Palm and Mac were now talking. But it did give me errors regarding the conduits being in conflict. So I changed the settings on some of the conduits and I finally got a successful sync.
Well semi-successful. Some of the stuff didn't seem to be syncing. Like some of my iCal entries. So I found an article showing how to drag some of the conduits to the Disabled folder. Which I did. And now ever since I cannot seem to get the the Palm and Mac to talk again. I get the "Connecting with the desktop using Cradle/Cable" for a while and then the "The connection between your handheld computer and the desktop could not be established. Please check your setup and try again."
Anyone know where I'm going wrong? Would really appreciate some help/advice.

Welcome to Apple Discussions.
There are apparently several issues in play here. So long as you are willing to live the the limitations of the iSync Palm Conduit and synchronize via only one path—either USB or Bluetooth, but not selectively moving back and forth between the two—you can configure iSync to synchronize contact data with the Address Book and calendaring and task data with iCal.
With the exception of non-conflicting conduits like Memos, you will be unable to synchronize at all with the Palm Desktop. [Palm conduits which conflict with iSync are those used by various models to synchronize contacts—Address Conduit and Contact Conduit—those used to synchronize calendars—Calendars Conduit and Datebook Conduit—and those used to synchronize tasks—Tasks Conduit and ToDo Conduit.]
Unless you thoroughly understand how this technology works, it's not a great idea to 'experiment' by moving conduits manually. A properly configured Conduits folder for iSync users should contain at least…
• Apple [the Finder name of the iSync Palm Conduit]
• Backup
• Install
• Memos Conduit [only if you want to continue to synchronize memos to the Palm Desktop]
• any non-conflicting third-party or additional conduits you want to use
Other conduits should reside in the Disabled Conduits folder.
You add a Palm device, either via USB or Bluetooth, using the Enable Palm OS Syncing… option under the Devices menu of iSync. You set the synchronization parameters for your device in the drop-down configuration pane exposed when you press the Tungsten icon in the main window of iSync.
You did the right thing by installing the Palm Desktop software using the bundled CD-ROM that shipped with your Treo 650. But, you should have upgraded that application by applying the Palm Desktop 4.2.1 revision D, available here:
http://www.palm.com/us/support/macintosh/macdesk421revd.html
If you elect to upgrade your copy, just run that installer. Do not attempt to remove any existing components of the Palm Desktop. And keep in mind that though you may not choose to use it at all, its HotSync Manager and Transport Monitor components are critical to the operation of iSync.

Ical stopped syncing to treo 650 and other quirks

I have been using ical with the palm software on my treo 650, but now updates to my calendar aren't syncing.
I don't know of any changes that I've made, and I think I have checked all of the settings.
I don't know if this is related, but a couple of weeks ago my ipod suddenly said "not configured to this computer" or something like that, so I had to delete my entire library of music and re-import it.
Also, the settings for Safari had to be reconfigured.
Hmmm....does anybody have any ideas why these programs are acting like that?

Welcome to Apple Discussions.
There have been widespread, unexplained issues involving iSync and Palm devices, many of them involving an inability to synchronize at all with iCal. I've seen no specific solution for such problems.
While I never experienced a complete failure of calendar information to pass in one direction or the other, I did have a number of easily demonstrated, repeatable errors crop up with my Treo 600 and iSync under Mac OS X 10.4 and iSync 2, which had never occured under prior releases. For example, the Unfiled calendar would periodically pop up, even though I had selected another calendar - Palm devices - into which Palm-created calendar entries were to be transfered. And, I was never able to synchronize more than three of what were then twenty-seven automatically created birthdays, in the Address Book generated Birthdays calendar. And there were a host of other issues, including the home vs work address label problem, the inability to synchronize more than one address, data duplication within records and occasional record duplication, and other annoying shortcomings.
I simply got fed up, and updated to The Missing Sync for Palm OS version 5. What a difference! All of the quirky iSync behaviors are now a thing of the past. While it seems ridiculous that you would have to install an additional third-party application to synchronize correctly, my experience with iSync - particularly since the release of iSync 2 and Mac OS X 10.4 about six months ago - tells me that it is.
If you are interested in exploring this comprehensive, long-term solution, you can find more information about that application here:
http://www.markspace.com/missingsync_palmos.php

Cannot download blueyonder emails to both iPhone and Mac Mail

Up until very recently I was receiving blueyonder emails on both my Mac Mail app on my MacBook and on my iPhone.
Now the emails will only download to the device it hits first. So, if I receive emails on my iPhone overnight, they wont be received on my MacBook/Mac Mail app when I switch it on and vice versa.
It's a blueyonder (virgin media) email account using POP3.
Macbook is running Mac OS X 10.5.8
Iphone 3G running 3.1.2
Any ideas what to do to receive the emails on both devices?

Hi I had the same problem a couple of weeks ago. They have posted a solution on their website it's just hard to find!
All you have to do is in your phone mail settings you have to add "recent:" before your username (I've put it before address and description as well just incase)
so for example:
recent:[email protected]
here is the info from the website
How do I download mail to multiple POP email programs?
Important information for customers who download Virgin Media Mail using several email programs or on different computers or devices
To access your messages with multiple POP email programs, use recent mode in every client to make sure that all messages are made available, rather than only to the first client to access new mail. Recent mode fetches the last 30 days of mail, regardless of whether it's been sent to another POP client already.
To enable Recent mode, replace '[email protected]' in the Username field of your POP client settings with 'recent:[email protected]' and ensure that the Leave messages on server option in your POP client is enabled.
POP Download settings - keeping copies in your webmail inbox when you download messages to Outlook or other programs
By default, when messages are downloaded by Outlook Express or other email programs, Virgin Media Mail is set to keep Virgin Media Mail's copy in the Inbox. This means that we keep a copy in your webmail inbox so it can be accessed online via webmail, or by other email programs on different computers or mobile devices.
If you want to change this, you can go to Forwarding & POP/IMAP within Settings, and next to When messages are accessed with POP select one of these options in the drop-list:
- archive Virgin Media Mail's copy
- delete Virgin Media Mail's copy
If you chose to keep or archive Virgin Media Mail's copy, these messages will eventually fill up your mail quota, but remember that with Virgin Media Mail you do have lots of space.
Please note that some email programs may be set to delete your messages when they are downloaded, but the setting within Virgin Media Mail will override the options set in your email program.
hth

Cisco VPN client and mac mail

Hi all,
I wonder if someone can be more helpful than my uni IT department who take a minimum of a week to get you an IP address...
My new uni uses Cisco VPN client for connection to the Wi-Fi network. It all works great apart from one (very annoying problem):-my e-mail accounts in mac mail don't seem to be able to connect via the VPN. I have had both an IMAP and a POP server e-mail account work automatically wherever I connect in the world for over a year now-so its not the way I've set up the accounts.
Is there any way to get mac mail to "see" the VPN connection. If I have to physically plug-in my mac this seems a tad ridiculous when it works in every coffee shop with free wi-fi.
My uni are not helpful as they want people to use either outlook or better still log-on to their e-mail using the web. I don't even want to use their e-mail-what is the point when I move jobs again in a year. What I do currently is use an IMAP account from my last job which I've set to forward to my "e-mail for life" from my undergrad uni. I basically only give out my life e-mail address and this also goes on all my papers.
If I can't access this easily and sort all my mail in all the folders I've created to filter out things like facebook etc. I'm wondering what the point of mac mail is.

Yeah, that stuff normally works for me. Unfortunately this is a situation where you have to use an external Cisco VPN client software, whether you like it or not. Its this horrible clunky thing (which at least half works I guess). So its only like normal wi-fi in terms of selecting the network, then you have to open up this application and put in your log-in etc. Most of the settings on this client seem locked, so there isn't much I can do to configure it.
I've just got to my (temporary) accommodation which doesn't have wi-fi or VPN (just ethernet) and my mail is working again-so it must be the VPN. Goodness knows how it works with an iPod touch (interested in getting one but kind of pointless if I spend most of my time at work and it doesn't work...)
Thanks for your suggestions though!

How do I copy e-mail and e-mail settings from one Mac to another?

I am fairly new to Mac and have been using a Mac mini for a few months. I have just purchased an iMac i7 and have used the migration tool to move apps and files over. However it didn't do anything with my e-mail accounts. I have several accounts setup on the Mini that I need moved over. I can't import because e-mail is not setup in the i7. Every time I open Mail on the i7 it wants me to setup an account. Is there anyway to bring the e-mail accounts and data over to the i7 without setting up Mail on the i7 first?

I agree with Antonio, but since we don't know if the Mail app on the Mini is the same version as the one on your new iMac, I'd err on the side of caution and allow Mail on the new iMac to set up; additionally, I'd prefer to start with a new preference file. In order to make it easier, you could take screenshots of all the account windows on the Mini. You can then use those to enter the info when setting up Mail on the new iMac.
After Mail is set up, quit Mail. Go to the location outlined by Antonio (Users-Library-Mail) and compare the folders with the folders from the old Mail app; i.e. the new Inbox folder should be empty -> remove that (drag to trash) and replace it with your old Inbox folder (same with Sent, etc). If you have old folders not found in the new location, add them.
When done, open Mail and your folders and emails should all be there.

Since maverick upgrade itunes keeps quiting and mac mail want let be change the font,

Since upgrade to 10.9 itunes keeps quiting and i cant change the front in mac mail
(is it just me or was this upgrade a waste of time)

Choose Preferences from the Finder menu, click on the General tab, and uncheck the box to open folders in a new tab.
(117195)

Sprint Treo 650 and .mac mail together as one?

Similar Messages

Maybe you are looking for