Sprint Treo 650 resets when trying to activate
I broke my centro and now I'm borrowing a treo 650 from a family member but can't seem to get to activate it with my account. Whenever I try to turn on the phone it stays frozen on Network Search for a few mintues and then it just says that the phone is off. And every time I put in the secondary activation code, the phone just brings up the Sprint welcome screen and then resets. I've tried soft and hard resets, the CDMA updater, and walking around outside while turning on the radio.
If it helps, under phone info the Phone Number, PCS vision username, ESN, PRL Rev, and PRI checksum are blank.
Post relates to: Centro (Sprint)
If you did a soft and the almighty hard reset then there's really nothing much that you can do except sending it for repair. Although the repair cost will roughly equal the **same amount** as purchasing a new Centro.
The next step that I recommend doing would be to take it to a Sprint store and having a Sprint Rep. inspect the device.
Similar Messages
-
Sprint Treo 650 connection with Apple Powerbook G4 867 MHz runing 10.4.6 ??
I am trying to use my Sprint Treo 650 as a modem with the Apple Powerbook laptop running the latest version of Tiger.
The old Treo 600 worked just fine using the laptop with 10.3.7.
But the old 600 died and I was forced to purchase a 650.
The Treo 650 manual says its possible to use the Treo 650 as a modem. The Apple manual says its possible to use a mobile phone as a modem.
I have actually gotten to the point where, after inserting "passords" like 654379 on my Treo after they were issued by the Apple. I've been told:
"Congratulations, you are connected"
They lie to me.
I've read about "hacks" for the TREO and the need to install special scripts. The instructions go for 26 written pages.
Is there not an easier way? These are the kind of things that make me not even want to visit the Apple Store ever again.
And I love my Apples!
Thanks for letting me vent.
Power Mac G4 Mac OS X (10.4.6)Don't know if it makes a difference (I don't think it does), but I have no problem connecting Treo 650 (Sprint Vision service) to my MBP 10.4.6 as a wireless modem. Make sure that you have the latest firmware on Treo 650 that enables DUN (Dial Up Network) on BT pref.
I just simply used the OSX BT setup, making sure that my 650 is discoverable and with a code (paired) for security. It is also using 650 serial port as RS232 port.
Connecting to 650 is done through Network connection on system Pref or via Airport menu. Under BT, configure as Other, the number to dail is #777 with account name and password to your Sprint Vision account (not your Sprint main account login or pw). It should be something like [email protected] for account name and corresponding password for that.
I think this is all you need to do. Did not use any hacks (in fact I completely stay away from Hacks - I have simple needs and want to keep things simple).
You'll have to probably try few times to get it all right and connect but it should not be too bad.
Hope this helps
Good luck.... -
I get a recurring error message "Cannot Sign in to Itunes" when trying to activate my New York Times for iPad APP account. What is the solution?
Same problem here. Apparently NYT has zero support capability. I emailed the. Three times and ive not even gotten an auto responder.
I deleted the app, re-downloaded it and reset it.
I have litrally no idea what to do
Anyone? -
Error message when trying to activate caller ID fo...
Hello. I keep getting an error message when trying to activate my caller ID for my mobile number. It keeps saying "We were unable to send you a confirmation code at this time. Please try again later. " I have checked the list of countries excluded from caller ID and my country is not on it. Please can anyone help? thanks
TiaSame things has happend to me for 4 days.
I have no answer, but I'd sure like one.
-- Gerry -
My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!
Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?
-
Is there any reason why my apple id and password allow log in to App Store but say password invalid when trying to activate Facetime - I thought that Id and password were the same for all functions ?
try the steps in this article:
http://support.apple.com/kb/TS4268 -
I get an error message when trying to activate imessage please help
i get an error message when trying to activate imessage. i already restored my phone didn work tried turning it off still nothing
Did you try again?
What network are you using?
Are you using a supported carrier? -
hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!
That's definitely enough to start.
It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
It seems you're up to date with software. Post with your results. -
when trying to activate iCloud on iPhone and iPad I get "account not verified... check your email." Can't verify account on either device.
Can't verify device on website either.Welcome to the Apple Community.
Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.
Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you. -
Error when trying to activate Office 2013 ProPlus - (0x80070005)
Have been receiving this error message for 2 days when trying to activate Office 2013.
Please note that I do not have the option to run Office as Administrator.
ISV using VB.net and SQL Server ExpressHi,
The suggestion I would like to provide was to run Office as administrator. By "I do not have the option to run Office as Administrator", did you mean you couldn't see the option or something else?
To run an Office application as administrator, we need to find the application shortcut, right click on it, then click "Run as administrator".
For the error message you provided, I also suggest you run the System File Checker to run the sfc /scannow command to scan all protected system files and replace the incorrect versions with the correct Microsoft versions.
For a Windows 7 PC
1. Click Start > All Programs >
Accessories, and then right-click Command Prompt and choose
Run as administrator.
2. In the command prompt, type sfc /scannow and press Enter.
3. When the system scan is complete, try to install Office again.
For a Windows 8 PC
1. Swipe in from the right edge of the screen, and then tap Search.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click
Search.)
2. Enter command prompt in the search box.
3. In the list of results, swipe down on or right-click Command Prompt, and then tap or click
Run as administrator.
4. In the Administrator: Command Prompt window, type sfc /scannow
press Enter.
5. When the system scan is complete, try to install Office again.
I hope the information is helpful.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Error when trying to activate new valuation area - AU158
Hi,
I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 08 differ by more than 1 year" (AU158).
Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
When I check the settings in transaction OAAR what I see is: area 01 - 2010 and area 08 (newest) - 2008 fiscal year is assigned.
How can I close area 08? Will I need reopen the 01 area until 2008 fiscal year?
How can I create the new area with the same fiscal year closing?
TksYear end closing--AJAB
FY Change---AJRW
If you open FY 2008, then you can create new depreciation area through AFBN.
I guess this depreciation area doesn't generate any postings and this is only for reporting purpose. -
Error when trying to activate new valuation area.
Hello forum,
I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 10 differ by more than 1 year".
Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
But when I check the settings in transaction OAAR what I see is that same fiscal year is assigned to all the areas.
I don´t understand why the system is showing me this error then...How can I ensure all areas to be in the same fiscal year.
Thanks in advanceHi,
Do you have other company codes which are using the same Chart of Depreciation? Please check these company codes and perform fiscal year change to them.
It seems that the problem is related to note 421549 : the system tries
to check the entries for field T093B-ABGJA for all the entries,not
only for the relevant company code. If there's a difference of more
than 1 fiscal year between the last closed fiscal year for the area
you are trying to create, and one of the entries in T093B, then,
error AU 158 arises."
Because according to the note 421549: the system tried to check the entries for field for ALL THE ENTRIES,not only for the relevant company code.
If there's a difference of more than 1 fiscal year between the last closed fiscal year for the area you are trying to create, and one of the entries in T093B, then, error AU 158 arises.
Regards Bernhard
Edited by: Bernhard Kirchner on Jul 19, 2010 1:22 PM -
When trying to activate my iPad 3, I consistently get a message that the activation server is unavailable, Please Try Again. Does anyone know how to help me?
It is not bricked... I think I finally found the way: http://www.imore.com/how-fix-activation-errors-iphone-after-installation-ios-7-b eta.
The above artical started to help.. but eventually I did the following:
1) put device into DFU mode
http://www.imore.com/tip-put-iphone-ipad-dfu-mode
2) when connecting ipad to itunes, itunes was aware of DFU mode. Just selected the update and itunes downloaded the correct new OS (iOS 7.0.2) and did it's thing.
Note: there was no need to download an older version of iOS. In fact, I was always rejected when attempting a downloaded ipsw. iTunes always said, "This device isn't eligible for the requested build".
Device Info: iPad 3 wifi. Software was iOS beta 7 (7 release 5 I think). -
When trying to activate facetime get the message i get "could not sign in. Please check network connections
My Apple ID is correct
tried with a new apple Id ...doesn't work neither
My connection is correct..;
I ve seen that this issue is frequent within mac users
Can anyone bring some help?
Thank youHello
Try this... I had the same problem and this worked for me.
Go to your system preferences → network → make sure WI-FI selected → advanced → DNS tab. Add 8.8.8.8 to the DNS servers. Go back to FaceTime and try to verify your account again.
Good luck! -
When trying to activate FaceTime, get code " Could not sign in.Please check network connections and try again".Wi fi is strong and can access everything else.Any advice?
Hello
Try this... I had the same problem and this worked for me.
Go to your system preferences → network → make sure WI-FI selected → advanced → DNS tab. Add 8.8.8.8 to the DNS servers. Go back to FaceTime and try to verify your account again.
Good luck!
Maybe you are looking for
-
I'm a little confused on how to use wildcards to find certain things in a sql query. I need to pull omit certain tables from my query, and I understand how to do it by doing a 'Ma*', but am not certain how to find preceeding characters. For instance,
-
Depreciation not run for single asset-Why
Hi Experts, Could anybody advise me why I am unable to run depreciation of single asset,(AFAB and repeat run used) However.I can ran depreciation of all assets of the company code(all are working fine), So Please suggest me how can I run depreciation
-
Has anyone have an iPhone 3g, but can't update the software to the latest update?
I just brought a iPhone 3G, and iv tryd downloading apps for it, but my phone says it cant because it requires iOS 5. How can you up date it to that version?
-
Hi there, We are using Process Integration for processing our POs. Our POs coming from the customers are being dumped to an FTP server. Our XI then fetch the PO files from the server and loads it to our ECC6 system. This setup has been working for us
-
Problem loading jaas.config file
Hi, i've built an rmi server that works as an authentication server. It uses jaas and an nt login module to manage authentication on windows. But when i try to load the jass.config file, i get errors : it tells that there is a security exception and