SPRO changes not reflecting in portal

Hi Experts,
We have made some changes in SPRO in Dev. We could see the changes in Portal Dev. The same we transported to QA but we could not see the changes in QA portal. We did cache refresh in Navigation but still we are unable to see the changes in portal. Any suggesstions.
Please help us.
Regards
Sowmya

Hi Sowmya ,
Try to invalidate Metadata Cache by using aRFC Metadata Invalidation tool, Procedure mentioned in the attached link
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10465350-b4f5-2910-61ba-a58282b3b6df&overridelayout=true
Srinivas

Similar Messages

Report changes not reflected in Portal

Hi,
I have a report designed in Business Intelligence Front end tool. I have added that report to a role created in BI backend and assigned the report to that role. I am executing the report in Portal through SSO and the report is executing successfully.
I made changes in the report and assigned it to the role again. When i execute the report in portal, the changes are not reflected. But when i check the same report in Portal using another team mate id, he is able to see the changed report. We checked the iview of the report in portal and the changed report is there in portal. But i donno why it is not showing up for me. We cleared the Browser cache and checked again but the result is same. We both have the same roles, so nothing to do with the Roles. I think the problem is in portal, but dont have an idea on where to check it.
Help me in this regard. Thanks for your time.
Regards,
Murali

Hello Murali,
This is strange but please do this simple test & confirm:
Run the iView using your colleague's id. Copy the complete URL from the browser.
Open another fresh browser session, pasting the URL login using your credentials.
What do you see now? Do you see the change?
This a simple method to filter out the issue..whether its related to backend or not.
Awaiting Reply.
Regards,
Ritu

Changes not reflected in portal after successful import

Hello,
I am having trouble with some transports in NWDI. I made some changes to the ESS Address Details dynpro and tested them in the development portal. I then imported them into CONS and the import ran successfully. However I cannot see the changes in the portal. I then ran the TCS Deployer and there was a long list of entries in the list of deployments for my buildspace. I then triggered the auto deployment and waited a few hours. This did not help either. I also checked to confirm that SDM was up and running which it was. Is anybody able to give me some advice on this?
Thanks a lot,
Ashley Butterfield

i have faced the same problem, but after 30 hours all the deployements are done, we got some thing around 511 deployement request on the consolidation server,
Cheers,
Apparao

SAP Portal changes not reflect in all the servers without reboot?

Dear SDN Members
We have one sap ep 7.0 eh1 main instance and 4 other portal instances.every time we tranport any portal develpment work such as epa packages, we need to restart all the instances to reflect the new changes.can you please suggest me
a solution if exists to avoid bouncing of all instances when a portal development work is transported.
Why does the changes not reflect in all the servers without the reboot??
Thanks
Chandra

Thanks for the quick response kenny, i wonder if we can configure any parameters in UME
to avoid bouncing of all the instances. please let me know if you have any other suggestions.
actually we have a central portal instance and 4 other portal servers connected through a
load balancer.Any tranport we move to central instance should refelect the changes in all
other portal instances.But we need to restart all the instances to see the new changes.
We are trying to find a solution if availbel which prevents server-restarts after each transport.
Thanks
Sekhar

TLN changes not reflecting

Hi All,
I have a requirement of customizing the TLN. I am modifying the CSS file from the toplevelnavigation.par in NWDS and then created an iView . But the changes done in CSS are not reflecting in portal's TLN.
What can be done to see the changes ?
Thanks,
Nishant Singh

hi,
are you gettting any error at time of execution or your modifications didn.t effecting the TLN?
did you check with the iview's preview.is it working fine? upload yor modifiedpar file with different name or (make a copy of you origina par file) cretae an ivew with modified par and check whether you are getting desired output and then you assign it to framework page.there may be a error in the CSS or mogified jsp file coding
Regards
Mahesh

Field lables changes in ESS iView not reflected on portal

Hi All,
I am trying to customize the SAP ESS Address DC (webdynpro Java) for South Africa region as per the SAP OSS note (No: 1428933).
In order to incorporate the changes I have imported the ess/za/addr DC into NWDS. I have changed the label text as per the OSS note and deployed the DC but changes are not reflecting in the portal
I did some more test on Label text;
1. Removed the Label text property value from DC and deployed the application, when I run the application during runtime screen is not showing any label text message for the label since I made it to empty.
1. I added my custom text message to label text value instead of standard label text value and deployed the application, when I run the application during run time screen is automaticaly showing the standard label text value not my custom label text value.
I'm trying to figure out from where these field labels value are coming from? Theoretically it should reflect field lables whats given in webdynpro but thats not the case here.
From where Label field value is coming?. Help me out in this. Thanks,
Regards, Suresh KB

If you are just changing the field label the recommended approach is to do it through Web Dynpro UI personalisation. DO NOT user NWDI to change the source code just for field label change. The way you change through UI personalisation is locate the iView in portal content, and select preview of iView then use CTRL+RIGHT click mouse button on the field that you want to change the text, you will see properties of selected field in a popup window where you can change the default text. Once you change it, and apply the changes you will be able to verify you changes in the iView properties (additional properties will be automatically created for the change you made). Now check the personal data service under ESS role you should see the change.
Hope this helps
Siva

Theme changes not reflecting in Consumer EP7.02 portal.

Hi Experts,
We are in CE7.2(Producer) fedarated with Enterprise portal 7.02. We are using custom theme and modified the font color for disabled field property from #999(grey) to #000000(black) in consumer portal. The changes are not reflecting in consumer portal. We have tried modifying the Master head and its reflecting as expecting. Even after that we cleared the cache and did restart both the servers as well. Still the changes are not reflecting.
Please provide your inputs, it will be great helpful for us.
With Regards,
Ramesh G.

Hi Ramesh,
Please copy the custom theme folder and paste it in the following path in the consumer server:
<Drive_name>:\sap\<SID>\JC<Instance_Number>\j2ee\cluster\server<Node_Number>\temp\webdynpro\web\sap.com\tcwddispwda\global\SSR\themes
Thanks
Gautam Singh

IMG HPF Area Page Customizing not reflecting in Portal

Hi,
I'm near to smashing my keyboard, but before I do so, maybe someone is able to help me:
In IMG Homepage Framework I've got a custom Area Page which has a Headline Area Description and an Area Description Longtext. I need to change the contents of these two fields. If I change the Headline Area Description, it reflects in Portal right after relogging. If I change the Area Description Longtext it still shows the old Area Description in portal. This is not supposed to happen and it never happened before.
Backend System: NW 7.01 Stack 8 ECC 6.00 EHP4 SP36
Portal Server: NW 7.01 Stack 9, All respective XSS Java Components and Business Packages Updated to EHP equivalents
I direly hope this is not due to the difference in Stacks ( Backend 8 - Frontend 9 ).
Portal cache has been cleared and portal has been restartet, without any effect.
Any ideas?
regards, Lukas

I haven't used external entries. From the Document you provided however, I take it, if I used one, I could just override the "bugged" Long description with an html file.
UPDATE/EDIT: When I create a HTML File in KM Content and pack it into a Ressource for external Linking in the Area Page. It does reflect, but looks horrible. If I remove the external entry again and keep the description long field blank. The old text reappears in ESS...
I looked through all the relevant tables in SE11/SE16 the entries in IMG do reflect; just not in ESS.
Aside from this workaround. Any other ideas why my problem occurs?
regards, Lukas
Edited by: Lukas Weigelt on Aug 17, 2011 11:39 AM

Language Not reflecting in portal sub areas

Hi all,
We have installed languages in back end ECC6.0 (SP14,Enhancement Package2). In UME we have assigned the default language to. But still its not reflecting fully in portal page. It means for example I have assigned a french language to the particular user in UME.After doing this activity, i logged in to the portal then the french language is reflecting in the areas but not in subareas(data from ECC ).The data are displaying in English only.
So, i think i need to maintain values are parameters for the translation has to be taken..
FYI: Its ESS module and i changed my setting also in browser
Anyone helping me in this it will be really helpful
Regards
Vijay kumar
Edited by: vijay kumar gopal on Jun 6, 2008 1:26 PM

Is the french language installed and maintained in your backend system? If yes, did you configure the browser so that is uses FR-fr as language first before using EN?
Markus

PO changes not reflecting in the SAP R/3 system in Extended classsic

Hi Guys,
I have a querry regards to deletion of a PO line item in Extended classic scenario Version 5.0. User has deleted the line item in the shopping cart and now the status of the shopping cart is with Zero value and line item deleted, but in the PO there is a line item with some Value and we are trying to delete it and save it, it gets deleted and PO status it shows as awaiting approval. but at the Item level of the PO the check box of Item deletion is updated. which means PO line item is deleted.
Now my querry is the status of the PO in the SRM shows a awaiting approval and this is not in approval tab but at the header level when I try to search the PO with PO display/change option. Also its not reflecting with the deleted item in R/3 system.
Please help me.
Regards
Srujank

Hi
Check configuration of your Message server. check if your message server is configured properly. Just go to your SAP logon. Select the system say "DEV" and click on groups.Then Click on System id and enter the id as "ID1" in your case.
and then enter the machine name in the message server box and then click on generate list. If your message server is configured correctly you would get some groups in the list below. only if that comes then go to SLD and check in the ABap technical system if you have configured technical system using the proper logon groups.
Then you should not face this problem. Let me know if you require more information.
regards
ravi

Adobe Camera Raw changes not reflecting in Premiere Pro

I was super excited to try out the new CNDG support in Premiere Pro CC 2014, but I have to be honest - I am a bit disappointed...
I am using 16bit Cinema DNG files and the source settings sliders really aren't doing it for me (notice the pink highlights)
That's alright though, I would much rather use Adobe Camera Raw!
Right click > Edit Original
There we go, that looks nice - no pink highlights, nicely recovered details in the shadows and highlights.
PERFECT, click DONE!
Nothing...For whatever reason, changes are not reflecting.
Adobe - please allow us to use Adobe Camera Raw, there are so many folks out there that want to incorporate it into their workflow. I have tried SpeedGrade and various other color correcting tools and I have found Adobe Camera Raw to work the best IMHO
Thank you for your time.
-Loyal Paying Customer

Hi Ekombokom,
ekombokom wrote:
Hello! I too am having this same problem. I used Camera Raw (both in Bridge and Photoshop to make sure) to adjust and correct the Cinema DNG files I shot with my BMPCC; however, the video sequence in Premiere does not reflect any of the changes made. Why would Adobe not support Camera Raw settings in Premiere?
Sorry, but Premiere Pro does not have a camera raw importer. You adjust the settings in the Source Settings dialog box instead (for RED, ARRI Raw, BMCC and BM Pocket Camera DNG files). You do have access to some controls for these formats, but in some cases, Camera Raw has more controls.
ekombokom wrote:
Camera Raw is an amazing tool for refining an image and gives me the best results compared to SG and Davinci. I was so excited to be able to use it once Premiere supported CinemaDNGs but now I'm confused as to why it's not supported.
Cinema DNG from the Blackmagic Cameras are supported, you just adjust settings in Source Settings, as I mentioned. Have you tried that? The reasoning behind this is that Cinema DNG video coming from camera raw is too difficult to playback and edit with.
That said, some users bring Cinema DNG footage to After Effects, adjust the video there, then render out files that are suitable to edit with.
ekombokom wrote:
I thought the point of using Adobe was that all their products worked together seamlessly? I really hope they fix this.
You can always make a request here: http://adobe.ly/feature_request, however, I don't see a camera raw importer going into Premiere Pro any time soon (if ever) because of the reasons I previously mentioned (editing with camera raw would be too cumbersome). I think the more realistic feature request would be to add more controls in Source Settings.
Thanks,
Kevin

Custom report stored procedure changes not reflecting

Hi,
I have a custom report which works fine but now I want to do some changes in stored procedure. The stored procedure compiles successfully but the changes are not reflected in the report. Am I missing out something as I am assuming that once the stored procedure is saved, the changes must reflect immediately.
Regards,
Rahul Sharma

I did some changes in the where clause to include few more input parameters and thats it. I have not changed anything else. Moreover, even if I try to introduce an error intentionally, OIM is not picking it up. Is there any other reference which I need to change?

Transported to A and Q box - Changes not reflected in only A Box Q Box Ok?

Hi Experts,
I am facing an issue with Transportation in SAP BI.
In my project we have a requirement to create a new query After that we have developed that query with new requirement features.
As per the user requirement, the new developed query must be moved to production and where as the old version could not be displayed any more.
For that purpose, after developing the query in Dev Box i have collected the tp and deleted the old version query in DEV Box.
I have transported the new version developed query to Acceptance Box and then to Quality Box.
And tested in Acceptace and Quality Box whether new developed query features is reflecting or not .
Found that, in Quality Box new query featured reflected where as in Acceptance Box the new query reflections have not reflected.
Now my question is if i trasport the same tp to production whether changes will get reflect or not
And also would like to know the route cause why in the acceptace changes have not get reflected.
I am confirming that, in both acceptace and quality box the tp were trasported succefully with out any of the errors.
Kindly reply me any of the folks faced this kind of issue or scenario in your projects or expeiriance.
Thanks,
SN.

Hi,
Just try re-importing your query in OVERWRITE mode from D to A. Also request your basis team while transporting your TR to Prod to transport it in OVERWRITE mode.
Hope this helps.
Regards
Jeeth

Develop Module changes not reflected on screen

I have used LR for about 3 years and have never had an issue with it. I am using LR 5.7 64 bit. I have a Win7 Pro machine with 8 Gb of RAM and 2 TB drive that is 50% free. I do not have PS and I am not a Creative Cloud customer. Yesterday I started having trouble in the develop module. None of my changes are being reflected on the screen.
It almost seems that the window never changes from the image preview to the live image. When I try to zoom the image gets very pixelated (goes back to my theory I am still looking at the preview). I can zoom in library mode and the image zooms correctly.
If I leave develop module and go back to library the changes are reflected. I have 2 catalogs, both are effected. I tried creating a new catalog and the problem still exists. When I try to use the crop tool the screen goes completely white (or black depending on background color).
I have tried all of the steps in the basic troubleshooting. I have tried uninstalling and re-installing.
Has any one seen this behavior? Any ideas how to correct?

I have solved this problem by uninstalling the DirectX drivers and re-installing them.

Changes not reflected in iWeb 08 program

I have been making changes to my site, publishing them to the web and all is fine. When I close out iWeb (and SAVE) not all of my changes are reflected when I reopen iWeb.
The published site is very fine, bu a lot of the changes I have made to the site are no longer reflected in my iWeb 08 program,

Hi,
First try to check if all the elements are in the transport rquest and then reptransport it...
If this still doesnt work, do the foloowing:
Run the prg : RSTXSCRP in Dev and EXPORT the script on to a desktop/location
Run the prg : RSTXSCRP in QA and IMPORT the script from the desktop/location specified above.
Hope this helps you
Regards
Sk

SPRO changes not reflecting in portal

Similar Messages

Maybe you are looking for