SPRO NET WEAVER GENERAL SETTINGS CURRENCY SET DECIMAL VALUES

sir,
PO was created with currency japanese YEN using Tcode ME21N . The net price was showing 142502300 (in JPY).
My problem is when checked in EKPO table , it saved with a value 1425023.00 So this is decimal value error. what can be done to correct this.
But In in SPRO>> NET WEAVER >> GENERAL SETTINGS >> CURRENCY>> SET DECIMAL VALUES FOR CURRENCIES is showing 0 decimals against JPY (Japanese YEN). How can it have saved to EKPO like that.
I want to know where else the Decimal values could have been set to 2 decimal places.
Regards,
Srinivasa Murthy

Check
Re: JPY Currency With Decimal upto 2,3 Decimal

Similar Messages

NET WEAVER GENERAL SETTINGS CURRENCY SET DECIMAL values

sir,
PO was created with currency japanese YEN using Tcode ME21N . The net price was showing 142502300 (in JPY).
My problem is when checked in EKPO table , it saved with a value 1425023.00 So this is decimal value error. what can be done to correct this.
But In in SPRO>> NET WEAVER >> GENERAL SETTINGS >> CURRENCY>> SET DECIMAL values FOR CURRENCY CODES is showing 0 decimals against JPY (Japanese YEN)
I want to know where else the Decimal values could have been set to 2 decimal places.
Regards,
Srinivasa Murthy

check the following posting :
Re: $ USD shows no decimal place values
hope this helps

Error saving purchase order data decimal values in SAP R/3

sir,
PO was created with currency japanese YEN using Tcode ME21N . The net price was showing 142502300 (in JPY).
when checked in EKPO table , it saved with a value 1425023.00 instead of 142502300 .
what can be done to correct this.
In PO Print out , it showing values as 1425023.00 which is wrong.
SPRO>> NET WEAVER >> GENERAL SETTINGS >> CURRENCY>> SET DECIMAL values FOR CURRENCY CODES is showing 0 decimals against JPY (Japanese YEN)
I want to know where else the Decimal values could have been set to 2 decimal places.
FOr other currencies like US Dollars there is no error.
Regards,
Srinivasa Murthy

Hello Srinivasa
Please check the forum Rules of Engagement - https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement.
Cross posting is not permitted. This issue is already raised in the application area forum which is probably correct. This does not look like a PI technical issue.
Regards
Mark Smyth
XI/PI Moderator

Error saving purchase order data decimal values

sir,
PO was created with currency japanese YEN using Tcode ME21N . The net price was showing 142502300 (in JPY).
when checked in EKPO table , it saved with a value 1425023.00 instead of 142502300 .
what can be done to correct this.
In PO Print out , it showing values as 1425023.00 which is wrong.
SPRO>> NET WEAVER >> GENERAL SETTINGS >> CURRENCY>> SET DECIMAL values FOR CURRENCY CODES is showing 0 decimals against JPY (Japanese YEN)
I want to know where else the Decimal values could have been set to 2 decimal places.
FOr other currencies like US Dollars there is no error.
Regards,
Srinivasa Murthy

Hi Srinivasa,
Use T. code OY01 and you can try 3rd option of decimal format that is 1234567, 89 for the same.
Regards,
Shailesh Verma

Local Currency COP, KRW values wrong in report

I have the following problem. Any values in local currency COP (Columbian Pesos) or KRW (Korean Won) comes in a report 100 times in value. For example if the value in the infocube is 1950 COP, in the report it shows as 195,000 COP. This happens only for currencies COP, KRW. For all other currencies the value in the cube and report are same. This is happening in AR cube, AP cube, Inventory cube.
How to correct and is there any setting to be done for this.
Please note that i am not using any currency conversion. I am just reporting in local currency .
Ram

Hi Ram,
It should be a bug.
The situation is the following.
For example, you load amount in COP (KRW) = 12345. Since default number of decimal places for amounts with currency is 2, the system keeps amount loaded as 12345,00 (with 2 decimals).
There is a special table TCURX which lists currencies with number of decimals not equal to 2 (you can also access or set values in this table through SPRO -> SAP Netweaver -> General settings -> Currencies -> Set decimal places for currencies).
I beleive you can find KRW & COP in the mentioned above table with number of decimals not set (zero).
During query result generation the system apply the real number of decimals from TCURX table and 12345,00 is treated as amount without decimals (coma simply ignored). That gives 1234500 amount. The same amount in TND (with 3 decimals) becomes 1234,500 etc.
There are plenty of OSS notes about this bug, for example, # 760195. Not sure which one to implement. Youd better contact SAP Support.
As a workaround I can suggest either delete KWR & COP from TCURX table or use amounts without currency or as number (with a separate 0CURRENCY field going into the cube).
Best regards,
Eugene

Decimal value

Hi All,
While creating the sales order, and entering the value of basic price in conditions tab of line item iam facing a problem - Input must be in the format ___.___.__~,__V.Message no. 00088
Kindly help me with soultion.
Regards,
guru prasad.

hi friend!!!!!!
u just check it T-CODE--- OY01
and path is spro---- sap net/weaver--general setting- set countries-define country---(here select country and go in detail)--decimal
actually u need not to change this kind of setting somebody has change this
BUT FRIEND ..when u change this kind of setting it is not a good practice because in previous data is in different decimal now it is in different so check it and do u r required changes
thanks

Cannot Update Decimal Places in General Settings

When I try to update the decimal points in the Administration > System Initialization > General Settings > Display path, SAP B1 gives me the following error:
"Cannot update while another user is connected to the company."
I am the only one on the system as "manager" with "Super User" and "Full Authorization"...
The SAP B1 Guide titled "How to Make Initial Setting in Business One - US" says "you can change these settings at any time".
QUESTION: What might be stopping this change, and more importantly, how do I get around this error to be able to change the decimal points?
Thanks all - Zal

Hi Zal,
I agree with you about the strange messaging used by SAP.
But blocking the possibility to decrease the decimal places is extremely important.
Suppose you have inserted a sales document with two items in this way:
Item 1 ___Qty 1,234 ___Unit price 1,22 ___Line total 1,51
Item 2 ___Qty 5,756 ___Unit price 3,15 ___Line total 18,13
____Document total 19,64
Then, someone wants to change the number of decimal places of the quantity from 3 to 2.
What happens would be:
Item 1 ___Qty 1,23 ___Unit price 1,22 ___Line total 1,51
Item 2 ___Qty 5,75 ___Unit price 3,15 ___Line total 18,13
____Document total 19,64
If you try to do the calculations manually you will see that the results are not correct. In fact all the document would have to change in:
Item 1 ___Qty 1,23 ___Unit price 1,22 ___Line total 1,50
Item 2 ___Qty 5,75 ___Unit price 3,15 ___Line total 18,11
____Document total 19,61
Also if the document total will show correct (in the case of rounding the second decimal position of item 2), the totals of any line is wrong. In fact there is no recalculation at all in SAP (and must not be done).
Imagine such a modification over thousand of documents and all of the descendants (mainly if the have lead to printouts - as say confirmations - sent to customers or vendors).
None of the economic figures will match.
BR
Antonio

General Settings Decimal Places

Good Day
Experts:
I have a request to make the Decimal places, for my Quantity and Price columns in a Matrix on one of our custom screens, have the same number of places as the list in General Settings\Display Tab.
For example, Prices has a setting of 4 Decimal Places. How can I specify 4 Decimal Places in my datasource:
MatlReqForm.DataSources.UserDataSources.Add("U_EaCost", SAPbouiCOM.BoDataType.dt_PRICE)
Is there some kind of option with this command that enables specifying the decimal places?
Is there a way to dynamically check where the value on the General Settings\Display Tab is set at
and have the datasource take on that value when assigning it to a field?
Please ask clarification questions if my exlpanation of needs if not clear enough...
Thanks for the hlep,
Ed

Hi Ed,
What version is this client running? It sounds like a bug. UserDataSources are automatically linked to the General Settings. If you set a datasource to the Price type then it should automatically show with the same number of decimal places as the Prices setting in General Settings. There is no way to set the number of decimal places on a datasource directly. I have tested this on a 2007A system and it works fine.
Kind Regards,
Owen

Bi general settings and img or spro settings

Hi experts,
I am working in bi for preparing bex reports in previous projects.
Now, I am woking in new implementation project. I have blank server.
What are the steps to start the new server settings in bi 7.0?
I know the connection settings for sap r3 data sources and global settings, loading process.
I want to know about other settings like in spro what are the setting to be done for implementation and general settings.
my source system is r3 only.
Regards,
Dharani

Pathak,
Thanks for your response. The document is not helpful for what I am looking for.
I want to under what settings need to be made from BI side in CRM/ECC/BI SPRO settings.
This must be standard for all new implementations. I appreciate if someone can share.
Thanks
Raghu
Edited by: Ravi on Sep 6, 2010 6:22 PM

Setting Azure Website General Settings through Powershell

Hi,
I am looking for information on how to set the website general settings through powershell cmdlets. When I create a new Website through gallery and choose Apache Tomcat 7 it default selects the .net framework. I would like to set those off and use Java version
Don't see any commands to set that default while creating a website.
Also, how can I set an SSL certificate and traffic manager end point to my website using powershell cmdlets.
Thanks in Advance.
Trupt

Hi Trupt,
Based on my research, you can configure the Type to AzureWebsite when you use
Add-AzureTrafficManagerEndpoint or
Set-AzureTrafficManagerEndpoint cmdlets. Although the article below is for cloud service, you can change the type and follow it:
http://azure.microsoft.com/blog/2014/06/26/azure-traffic-manager-external-endpoints-and-weighted-round-robin-via-powershell/
In addition, based on my experience, you can create a SSL certificate via Azure PowerShell, however, there is no way to add it to a web site in Azure PowerShell.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error while updating decimal places in general settings

Hii All
         I have got an error while updating Decimal places in General Settings
Cannot update while another user is connected to the company i have checked, there is no other user logged in, i could add other settings but the problem is only with Decimal Places
Note : there are no postings yet, a fresh database for a new client
         what could be the possible reason
                                                             thanks
                                                                     RIYAZ

Hiii All
      As a forum rule, i have initially gone through with the existing threads and then i was force to post a thread,
          would be helpfull if there is any other way..
                                            Thanks
                                                     RIYAZ

How to set the same General settings for all users

Hi Experts,
How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
Regards,
Arti.

Hi Arti!
You can default user settings in a PFCG role, in the "personalization" tab.
If you have a PFCG role that is common to all your users, you can set the default values here.
However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
Matthias

HT201320 I have just set up my email accounts, calendars etc on my new iphone5s, but seem to be stuck in 'Mail, contacts and calendar' section. How do I get back to the general settings page?

I have just set up my email accounts, calendars etc on my new iphone5s, but seem to be stuck in 'Mail, contacts and calendar' section. How do I get back to the general settings page?

Solved! Turn it off and on again!

SAP Netweaver/General settings/Set Countries/Set Country-Specific Checks

Hi All,
following the customizing navigation:
SAP Netweaver/General settings/Set Countries/Set Country-Specific Checks
By the flag "Other data", I can activate the check of tax numbers.
So, SAP gives me an error message if a tax number filled in master data of customers or vendors is wrong.
I'd like to change the message in warning...
I've tried to do it, but without unsuccessfully.
Could anyone help me?
Thanks

Hello,
This is a cross client activity which is not directly available in the system in OBA5.
The error message that is AR191
You need to go to transaction code OBMSG and enter the message number in application area.
In case if you get a warning message at this time stating that: "Changes to Repository or cross-client Customizing are not permitted". In that case you need to check with your basis administration to allow the cross client settings in SCC4. Until you make necessary changes in SCC4, your OBMSG transaction code is in ONLY DISPLAY mode.
Application Area: AR
Message No.191
Allowed: W
Standard: E
Save your entries.
Now this is available in OBA5 and give the application area AR and enter the message number.
In Online and batch put the message number to W.
Save your entries.
Hope this solve your issue.
Regards,
Ravi

My iphone keeps freezing, especially in the mail setting. The support center indicates i should go to settings, then general settings, and then to update software, but there is no "update software" selection under general settings. can anyone help?

My iphone keeps freezing, especially in the mail setting. The support center indicates i should go to settings, then general settings, and then to update software, but there is no "update software" selection under general settings. can anyone help? Thanks!
PS i think I have an iphone4, but not sure

You may connect it to iTunes and update it from there.

SPRO NET WEAVER GENERAL SETTINGS CURRENCY SET DECIMAL VALUES

Similar Messages

Maybe you are looking for