SPRO setting for BW

Could someone please help with this
Using BW 3.5
We have recently applied Support Packs moving from SP14 to SP20
When excuting queries in succession we have noticed that the when executing next query it retains values of the parameters from the previous query (if the same parameters are used)
Is there any any setting which we can set to ensure that the variable screen appears blank. WE have had a look at SPRO in BW but cannot find anything that might be relevant and are not sure what setting we should be looking for
Thanks
Pushpa

Dear Mahesh,
Hope you are working in Production , Replicate the Datasource Manually , Goto Infosource --> you can see the source system --> Right Click and Replicate . Then Goto SE38 --> Give the Prg Name --> RS_TRANSTRU_ACTIVATE_ALL , then press F8 . Give the Infosource Name and Source System , Then execute again . You can see your transfer structure getting generated again .
If it doesnot work , You have to again Replicate and Activate in the Development and take the same request and move the same to BWP .
Hope it Helps.
Thanks,
Krish
*Assigning points is a way of sayin Thanks in SDN

Similar Messages

SPRO setting for Shipping screen in Purchase Order

Hi Friends,
I am working at Purchase Order in AFS and I added a custom screen using BADI (ME_GUI_PO_CUST) at item level that behave same as standard shipping screen but I want this custom screen should display in all condition, actually it disapper when standard shipping goes off.
so, to accomplish this do i need make any changes in BADI or something to do in SPRO???
Please suggest....!
-SUNIL.

Re: Only 0 KG of material available
Kindly check above mentioned thread.

CProjects URL - to be set for use on intranet

Hi,
I am to work on cProjects 4.0 and in the IMG settings I need to set the URL which I'd use to access cProjects on the browser. How do I set the URL for use in the intranet? Which transaction do I use and where exactly do I set? What is the URL string I ought to use? I mean, is there some rule that I need to be aware of for setting the URL to be used in the browser?
Thanks very much.
Regards,
Bittu.

The url to be specified in the spro setting will be of the following form
This is for ECC6.0
https://<hostname>:<portname>/sap/bc/webdynpro/sap/cprojects
Regards,
S.Jenibalet

System setting for vendor evaluation incomplete

HI....
I want to caryout automatic vendor evaluation when i run t code ME63, its show an error system setting for purchase org incomplete where as i have maintained all the parameters from standarfd 0001, can anyone tell me how to carry out ven evaluation.
Regards
SARFRAZ

Hi,
Select SPRO --> Materials Management --> Purchasing --> Vendor Evaluation. Select following criteria -
1) Define Weighing keys - Here define weighing keys in addition to 01- Equal Weighing & 02- Unequal Weighing (if required)
2) Define Criteria - Here 5 standard criteria are maintained. Maintain additional criteria if required. Also maintain sub-criteria. Each main criteria contains some standard subcriteria. If required you may maintain additional subcriteria upto 20 per main criteria.
3) Define Scope List - Here you may maintain how the evaluated vendors should be ranked.
4) Define Purchase Organization Data for Vendor Evaluation - Here you may maintain main criteria & sub-criteria for your purchasing organisation. Also maintain score for equal & unequal weighing. Maintain point score for automatic criteria for each percentage vainance
Hope this fulfils your query
Regards

Error when i try to Activate BC Set for Charm

Hi gurus,
I´m trying to activate the BC Set for charm via spro and the following error message apear when I try to activate that.(solman 4.0 sp 16)
"SAP ChaRM auto-configuration warnings"
"Message no. IMG_FASTCONF028"
Any idea for this?
Regards,
Ignacio.

Hi,
Usally the error message will come when you activate try to activate the same BC set two many times and also if you open the spro page in another screen when you try to activate the Bc set parallel means. the error message will throw.
So before activating the BC set have look of the logs of the BC set in the same tcode. SCPR20.
Then have a look in sm50 if anyone is usin ghte SPRO or someother screen it may cause the error. so end other sessions and activate the same.
Hope this will help u
Regards
Vijay

Output Determination Configuration Setting for GoodsIssue(Transfer Posting)

Hello Gurus,
Can any one give the details for Output Determination Configuration Setting for Goods Issue(Transfer Posting).
Thanks N Regards,
Venu MG

hi,
PRINT OUT OF MATERIAL DOCUMENT AT GI/Transfer posting:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensured in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. In MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.(Condition records)
8. While doing MIGO, ensured that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
Now go to MB90 entered the output type as WE01, Tr m as 1, Sort or. 01, Pro.mode as 01, and executed. Sytem outputted all the material documents that has to be taken print out.
Regards
Priyanka.P

What does spro stands for?

HI,
what does spro stands for?
Thanx

Hi,
SPRO is a standard SAP transaction.
Its SAP's naming convention, and stands for SAP PROJECT REFERENCE OBJECT.
This transaction is used for customization setting in SAP.
Reward if helpful.
Regards
Ravi

BC set for desktop connection sap crm

Hi Folks,
Need help in identifying the BC set for groupware settings ...no nodes are available in spro -->crm-->desktop connection for sapcrm ...need assistance
Regards
Jaya

Hello ,
Did you install the SAPK-700AGINCRMGWS component ?
Best regards
julien

Configuration setting for Auto TO through Delivery (outbound)

Hi Gurus,
Could you plz, tell me whrere is the config setting for TO. creation through VL06O.
I am fallowing the below steps
1.STO creation.(STR converted to STO via ME59N).
2.Delivery created thru VL10B.
3.TO created thru VL06O (When I click on TO in background, TO is creating and displaying in LT23)
After the above process I confirm TO and do the post goods issue.
I want to know info. about configuration setting to create TO through VL06O.
your hlep will appriciated a lot.
thanks
raghu

Hi Raghu,
There is no separate settings for VL06O for Automatic TO creation.
Normally we assign the Automatic Creation to Mov.types in WM.
SPRO - LE - WM - Activities - Transfers - Set Up Autom. TO Creation for TRs / Posting Change Notices
In the above scenario which you have mentioned you are creating TO in the background which is done using the Mov.type & Strorage type Strategy Settings & its not a Auto TO creation.
Hope its clear,
Regards,

Variance Setting for FR1,HAN,INS,FR3 Transactions OBYC

Dear Guru's,
I have have set these transactions FR1,HAN,INS,FR3 in OBYC so that the values from PO will be accrued to a specific GL account.
Example:
PO - Freight - $100
FR1 settings will accrue this value to gl account.
MIR4 - Freight - $120
SO there is a variance of $20. MIR4 is done for planned delivery cost, and there is a difference in value where do I set the variance account of FR1,HAN,INS and FR3.
I have not been able to find the setting for this. Much help appreciated.
Best Regards,
Eu-Jin

Hi
Jin set tolerance limits for logistic invoice verification in SPRO SETTINGS under logistic invoice verification
regards
kishore reddy

List of Standard BC sets for OM and PA

hi ,
Request you to help me with any standard list of OM and PA BC sets.....Hope for your reply soon...
Thanks,
Sonu

Check with BC Sets is activated or not through tcode SCPR20PR...If it not activated then activate with Tcode SCPR20..
BC Sets for HR
EA-HR-MENU
EA-HR-AKH
EA-HR-IMG
Check with SAP Notes as well..
855959 - Activation of Extension Sets via SPRO not successful
719694 - Activating BC Sets in the production system
Mohan

QM Setting for Service Purchase

Please help me out to solve this issue.
My clients want me to do setting for triggering QM lot after Completion of service entry sheet. Since they pay to their vendors after checking quality of their service.
As far as I know , One can set QM for material from QM view in Matl master. But For services from where we can set this is some thing which I am not aware of.
Please help.
Sharabh

Hi, Craig
Want to share with you my progress.
I config QM in the such way:
step\ transaction\ config
Master Inspection Characteristic     \ QS21 \     +
Material -> Quality management-> Inspection Type \     MM01 \     09
QM-stock\     MM01 \     -
Material Specification\     QS61 \     -
Batch valuation without material specification \     spro -> Plant Customizing\     +
Inspection Plan \     QP01 \     +
Inspection Points \     active-no     \ +
Inspection Points Type -> Last inspected sample is valid \     spro     \ 150: +
Physical Samples\     active- no     \ -
Sample-drawing procedure\     QPV2 \     -
Sampling Procedure \     QDV1     \ +
Inspection Method     \ QS31 \      -
Recurring insp.: job planning     \ QA05 \   +
Everything is ok, but when I want to record result (in qe51n) for inspection point and at the end of the process press the button "Inspection point" -> "Batch carac." -> "Continue" -> error appear "ABAP/4 error during dynamic assign beyond program bounds".
Is it because I haven't edit FM from config 150 Inspection point?
I don't know how to do it. And deside to config all the process before give to edit that FM to our ABAP-consultants.
Thanks a lot.
Best regards
Masha

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

On HP-UX 11g rac cluvfy tool failed with "/dev/async" (incorrect setting for minor number.)

Hi ,
We are planing to upgrade our 10g R2 CRS to 11g R2 CRS on HP-UX server ,while running cluvfy tool we are getting the below error.Please help me to fix this issue.
Checking settings of device file "/dev/async"
Node Name     Available                 Comment
erpdev04      yes                       failed (incorrect setting for minor number.)
erpdev03      yes                       failed (incorrect setting for minor number.)
Result: Check for settings of device file "/dev/async" failed.
Pre-check for cluster services setup was unsuccessful on all the nodes.
oracle.oracle.erpdev03.fwprod_app1> (/app/oracle/oracle_source/patches/bin)

# /sbin/mknod /dev/async c 101 0x104

Where did all the setting for printing go in PSE8-Mac?!

OK, I'm probably missing some obvious settings somewhere, please tell me after you read my rantings...
I'm using the 'Full Edit' mode, assuming that is important. But the new Print Dialog looks like it has been dumbed down for some one, not sure who, however has it has me completely confused. There are now only three 'steps' for printing. One and two are self explanatory. However...
Step three concerns paper size, image size and several other details. Just for testing, I created a new 4 x 6 inch, 300dpi page and drew some lines. Command-P. Proper printer is selected, select "Letter" as the paper size. 4 x 6 inch appears selected as the "Print size" (I thought that was because of the original page size, but it appears to simply be the default). That is a detail that could easily be over looked by a new user. If the original image is larger than 4 x 6, it will, obviously be either cropped or reduced to fit those dimensions! It seems to me that the "Select Print Size" should automatically assume to be the image size. OTOH, I can see that some people may want to do all their printing on one size of paper. In that case, why not have a preference for the default and let the user change it when they change paper sizes (if they want)?
Now, if the user happens to notice that a new 8 x 10 inch image is going to be printed in a 4 x 6 area, she will now decide to check the other settings available in the pop up menu. OK, there IS an 8 x 10 inch choice. But look, what's this "Custom" choice? Let's investigate...Now this is strange! The defaults there seem to be 1.383 inches for height AND width! Who came up with that weird number?!
Oh, there is a "Scale to Fit Media" check box. Checking that now makes the height and width somewhat closer to reality, they now indicate the pape dimensions. That IS logical, but not extremely helpful, IMHO. By the way, the second time one selects the "Custom" choice, the correct, original image size appeared in the Print size boxes. Although I cannot seem to get those to reappear. Oh well...
My point is, how do these confusing configurations help? Beyond me, anyway.
BTW, the dpi settings all seem to be 'computed' at one less than the number set by the user for an image. For example, a new image page created at 300 dpi shows 299 in the Custom dialog, 150 shows 149, etc. Close, but why not exact? Furthermore, why can't the user select any dpi they choose? Isn't that what the computer if for; calculate what happens to the pixels when they print at a different setting than the image? Sure, the user should be warned that terrible images my result, but if that's what the user wants, let it be done! Who's running this show, anyway? Oh yeah, I remember, now...excuse me for asking, I'm only a paying customer, what do I know?!
Lastly, if one has more than one image open, every single one can easily be printed, accidentally. Why? Because they will all appear in the Print Dialog. Don't you see them? Over there on the left. Yeah, I see them, but why doesn't the image I have in front, the one I'm working on, be the one I probably want to print? Many of the others may simply be images I'm borrowing parts from. Why do the developers think I always want to print every image that might be open? I don't have any idea, either. Sure, there are a couple of ways to prevent this multiple image printing; select the one you don't want to print and use the "minus" button or simply close all those images before going to the Print dialog. Guess what. Using the 'minus' button only works for this printing, the next time you ask to print they will all be there, again. And, what if you aren't really finished using some of those extra images that you closed? Now you get to re-open them all again. Completely unnecessary steps because of poor user considerations/research, in my humble opinion. Again, this is exactly the thing that preferences are made for. Or, put them in the "Edit Guided" mode! Or, better yet, just give me back the old Print dialog! Nice!
Now, I am extremely glad to see that PSE can now remember to keep that stupid Panel bin out of the way! Finally! Three more inches of screen to work with!!! Hooray!! Unfortunately, it still can't remember what the last setting for the jpeg quality was...still defaults to ZERO! Sure, that's the setting I always want to use, it's so much fun letting people try to guess what is in the image...one would think after 8 iterations this could be fixed. One down, umpteen to go. Oh well, what do you want for $80?

Thanks for your listening/reading and I'll take your advice about dropping a note to the developers, but I won't be holding by breath! I doubt that they consider this a real problem. It's really just my ranting!
Your solution is probably the 'fix' they might suggest, anyway. However, I'd rather have the screen space than a list of thumbnails of images I already have open. command-plus and/or minus is a pretty quick way of making it easy to see anything that might be visible. Of course, I'm sure there are other uses for the Project Bin that many find useful. Even though I have a 24" iMac, I rather like using the screen space the way I want, not an arbitrary way that got developed. I just don't see why developers can't program an app to allow every conceivable method of use by every living and future user! LOL!!!
I guess today was the first time I've printed anything since installing 8. I was, quite confused when presented with the new Print interface. Actually, I thought that must be part of the 'Guided' set up which I assume leads one by the hand as much as possible. "Thank you Adobe, but I'm trying to avoid unnecessary contact with strangers right now." LOL! At least I know I didn't miss some setting somewhere.
Thanks! Have a great weekend! And don't get scared too much tonight!

SPRO setting for BW

Similar Messages

Maybe you are looking for