SPRO Settings for 0CML_INIT_BUDAT, 0CML_INIT_DDISPO,0CML_INIT_DFAELL, 0CML_DELTA & 0CML_DELTA_CAP

Hi Gurus,
We are trying to use 0CML_INIT_BUDAT, 0CML_INIT_DDISPO, 0CML_INIT_DFAELL, 0CML_DELTA & 0CML_DELTA_CAP for first time.
Have done prerequisite settings in SPRO tode in ECC client.
After when i try to run 0CML_INIT_BUDAT it extracts data only for the date which we have mentioned in 'infosources for position intialisation' in SPRO.
I am not sure where did i go wrong.
Please help me detailed steps for setting SPRO and also why is it not extracting all data from the position date specified rather it extracts only on that date.
Thanks in advance.
points will be assigned.

Hi Nimesh,
I would like to receive the document as well.
My e-mail is [email protected]
Thanks in advance,

Similar Messages

Spro Settings for CAD Desktop

Hi Experts,
Can you please guide me what spro settings needs to be done for implementing CAD Desktop. I have gone through the SAP Library notes but still confused regarding the IMPLICATIONS of the fields under CAD Systems in spro like Group Maintenance, Applications, Parameters etc.. What are their implications and what settings need to be done?
If any of you have got SAP notes on the Implementation and Spro settings for CAD documents, Please forward me.
Thanks a lot in advance....

Hi,
for CAD Integration you also need the plug-ins for the CAD Systems. In the installation-guides for the plug-ins you also find the required settings for the CDESK customizing. In addition a lot of information - especially about the parameters - can be found in the notes (service.sap.com/notes).
More info on the plug-ins: http://wiki.sdn.sap.com/wiki/display/PLM/CADIntegrationin+PLM
Best regards,
Martin

SPRO settings for the Creation of treatment codes.

Hi Experts,
Let us know SPRO settings for the creation of the new treatment codes and suggest us where it can be checked once created eg. Sales order,Delivery,Invoice.
Regards,
harmesh

Hi
What is Treatment Code??
If you mean Sales Order / Delivery / Billing Document Type then you may follow the below path in SPRO :-
Order :- IMG> Sales and Distribution>Sales > sales Document>Sales Document header(VOV8)
Delivery :- IMG--> Logistics Execution > Shipping>Deliveries --> Define delivery Type (0VLK)
Billing :- IMG --> Sales & Dist. > Billing> Billing Document--> Define Billing type (VOFA)
Regards
Amitesh Anand

SPRO settings for Framework page

hi,
I have made few changes in SPRO settings as below.
In a framework subarea i have added two services A and B.
in dev portal both the services A and B are visible one below the other.
where as when it is transported to QA server.
Only one service is visible.
for some users A is visible and the other "B" is not visible, where as for other user B is visible and A is not ?
the proxy classes used are standard...
Regards,
SV.

hi,
we dont have user id in QA by which i can debug the FM externally.
but if i debug the given FM (HRXSS_SER_GETAREAMENUDATA) from R/3 it shows me both the links A and B for the particular pernr.
please guide me futher.
Regards,
SV
Edited by: SAP Portal Deve on Aug 7, 2009 2:31 PM

IMG or SPRO Settings for BI in CRM

Hi All,
We are doing a new implementation of BI primarily for CRM but the data also comes from ECC for actuals.
Can someone tell me what are the required / important BI settings that need to be done in IMG for new development.
1. IMG Settings for BI Reporting in CRM
2. IMG Settings for BI Reportign in ECC
3. IMG Settings in BI System
Any input is greatly appreciated.
Thanks

Pathak,
Thanks for your response. The document is not helpful for what I am looking for.
I want to under what settings need to be made from BI side in CRM/ECC/BI SPRO settings.
This must be standard for all new implementations. I appreciate if someone can share.
Thanks
Raghu
Edited by: Ravi on Sep 6, 2010 6:22 PM

SPRO settings for warehouse

Hi ,,
Can anyone please help to set this Warehouse and subcategories scenario with SPRO..
Warehouse Number
       - Storage Type( like bulk .. )
               - Storage Section/ Picking Area
                      - Storage Bin
                             - Quant .
I am able to define only warehouse number . How to set the rest .
Please Help ..
Regards,

12.1     Creating Warehouse
Transaction code     SPRO
IMG menu     Enterprise Structure  Definition  Logistics Execution  Define, copy, delete, check warehouse number
12.2     Defining Control Parameters for Warehouse Number
SAP menu     Logistics Execution  Warehouse Management  Master Date  Define Control Parameters for Warehouse Number
Transaction code     SPRO
12.3     Spool Parameters for Transfer Order Printing
SAP menu     Logistics Execution  Warehouse Management  Activities  Define Print Control
Transaction code     SPRO
12.4     Profile for Sorting during TO Print Procedure
SAP menu     Logistics Execution  Shipping  Picking  Lean WM  Define Print Control
Transaction code     SPRO
12.5     Transfer Order Print Indicators
SAP menu     Logistics Execution Warehouse Management  Activities  Define Print Control
Transaction code     SPRO
12.6     Print Program per Warehouse Number
SAP menu     Logistics Execution  Warehouse Management  Activities  Define Print Control
Transaction code     SPRO
12.7     Defining Number Ranges
SAP menu     Logistics Execution  Warehouse Management  Master Data  Define Number Ranges
Transaction code     SPRO
12.8     Defining Number Ranges for WM
SAP menu     Logistics Execution  Warehouse Management  Master Data  Define Number Ranges
Transaction code     SPRO
12.9     Warehouse Settings
12.9.1     Defining Storage Type
SAP menu     Logistics Execution Warehouse Management  Master Data  Define Storage Type
Transaction code     SPRO
12.9.2     Defining Storage Sections
SAP menu     Logistics Execution  Warehouse Management  Master Data  Define Storage Sections
Transaction code     SPRO
12.9.3     Defining Storage Bin Types
SAP menu     Logistics Execution  Warehouse Management  Master Data  Storage Bins  Define Storage Bin Types
Transaction code     SPRO
12.9.4     Defining Storage Type Indicator
SAP menu     Logistics Execution  Warehouse Management  Master Data  Material  Define Storage Types Indicators
Transaction code     SPRO
12.9.5     Defining Storage Unit Types
SAP menu     Logistics Execution Warehouse Management  Master Data  Material  Define Storage Unit Type
Transaction code     SPRO
12.9.6     Defining Storage Section Indicators
SAP menu     Logistics Execution  Warehouse Management  Master Data  Material  Define Storage Section Indicators
Transaction code     SPRO
12.9.7     Assigning Warehouse number to plant/storage location
SAP menu     Enterprise Structure Assignment  Logistics Execution  Assign Warehouse Number to plant/storage location
Transaction code     SPRO
12.9.8     Defining Requirement Types
SAP menu     Logistics Execution Warehouse Management  Activities  Transfers  Define Requirement Types
Transaction code     SPRO
12.9.9     Activate Storage Unit Management per Warehouse Number
SAP menu     Logistics Execution Warehouse Management  Storage Units  Master Data  Activate Storage Unit Management per Warehouse Number
Transaction code     SPRO
Defining control parameters and number ranges f. warehouse no.
SAP menu     Logistics Execution  Shipping  Picking  Lean WM  Define control parameters and number ranges f. warehouse no.
Transaction code     SPRO
12.11     Defining Difference Indicators
SAP menu     Logistics Execution  Shipping  Picking  Lean WM  Define Difference Indicators
Transaction code     SPRO

SPRO Settings to configure the standard Workflow for PO

Hi Guys,
Please let me know the steps to configure the Standard PO workflow. I want to know the SPRO Settings for the same

Search this forum with keyword Release Procedure and you will get your answer. Ideally fnal people should configure this settings.
Thanks
Arghadip

SPRO (Customization) settings for PM-PP integration

Hi Everyone,
Though I know one or two customizing settings, I need to know all the SPRO settings for PM-PP integration. please be elaborative in your responses.
Thanks in advance.

Hi
Please find standard scenario for SAP PM_PP integration.
The goal is to see maintenance work orders taking available capacity from
production work centers.
Production work center must be entered into the appropriate equipment master record(s).
The work order the 'system condition' must to set to "0" for PM
reservations.
Production work center is set to include "Proj:RqmtsNetwkMaint" (Standard formula SAP008) in both the Scheduling
view and Capacity view in the 'Other formula' field. The capacity requirements in "Extended" capacity evaluation
(transaction codes CM50 - CM55).
Let me know
Regards

EBRS - MT940 format - no transaction types available in SPRO settings

Hello Experts,
I got bank statement in MT940 format. I checked SPRO settings for electronic BRS. I checked in node create transaction type. However, I didn't find transaction type for MT940 format. How to get such transaction types in SAP.
Please refer screenshot and help me on how to get the transaction type for MT940.
Meena

Hello Meena,
Transaction type which are mutually agreed by business and Banker's and which same has to be configure as mentioned in spro.
Financial accounting New > Bank accounting>Business transactons > Payment transactions > Electronic Bank statement > Make global settigns for EBS > where you have seen create trasnction code types as folder. Double click on that and maintain the same
Regards
Mani

Settings for SCE in CRM 5.0

Hi
I am using CRM 5.0 in our environment. We have made the settings for VMC, and it is now running fine. After this what settings do I need to make for SCE. As per documentation available, RFC connections are not required for SPE, SCE or TTE.
But when I look at SPRO in middleware parameters, we have to define some parameters for the SCE. Please tell me what all are the settings required for the same.
Cheers
Hits

Hi Hitesh
Look at the IPC config guide. You need to make settings in TBE31, CRMCONSUM, CRMRFCPAR.

Error in PB60 "Settings for word processing system are wrong"

Hello Everybody
I am working on recruitment,
i have create applicant activity in SPRO, but when i was going to create applicant activity PB60 maintain and entering the personal number the error display " "Settings for word processing system are wrong"
then i check feature set word processing system.
plz anybody guide me how to resolved this problem
thanks
urvashi

Hi Urvashi,
Please check the following in your system:
- Go to PE03
- feature 'WPROC'
- select 'Attributes'
- press 'Display'
- press 'Struct.'
- there you will find the Basic information 'Passing type'
This must be set to '2' (Table Transfer). If this is set
to '1' i.e. please change this entry.
Hope this help
Sarah

System settings for purchasing organization PO01 incomplete

Hi!
I've been doing a vendor evaluation but I got this message: System settings for purchasing organization PO01 incomplete. Kindly assist me where in SPRO can I fix this. Thank you.

hi,
Define Purchasing Organization data for vendor evaluations in transaction OMGL.
Hope it helps..
Regards
Priyanka.P

Order type settings for convert planned order to production order

Dear sir,
I have 1 company code ,under 2 virtual plants are there.My scenario is plant 1(main plant)and plant 2 (virtual plant)
both plant same FERT material.in plant 2 i am creating sale order and atual production will be done in plant 1.
FERT material plant 2(strategy-40 sp.procurement-40 setting in spro ref plant (plant1) )and plant 1 material (strategy 82)
run the MRP MD50.panned orders are created but iam not getting production orders directly not getting the production orders
.i have done settings in spro OPPE order type is given.in MD04 manual conversion planned order to production order system asking order type ,but i given order type in OPPE
What are the settings for production order directly from sale order at the time of RUNNING MD50
Regards,
Naresh.

Hi,
You will not get a production order out of MD50. That would have to be set up in the SD customizing for the sales order item, but I am not sure that would work with your two-plant setup.
After MD50 you need to run CO41 for the collective conversion (and I also recommend the mentioned production scheduling profile customizing and then maintain this profile in the material master work scheduling view)
BR

Shopping Cart - Default Settings for items

Hi all,
We are on SRM 7.0 SP05 classic scenario with backend ECC 6.0 EHP4. There is a requirement to retain shopping cart default settings so that user is no need to enter default values on each shopping cart creation.
We are intent to develop a custom WDA for users to edit their own shopping cart default settings, the values will be saved to user position attributes and extended attributes (including some customized attributes) at PPOMA_BBP. After that, default settings will be copied from attribute during shopping cart creation, for example:
Item Basic Data: Product Category <== extended attribute "Product Category" value which is set as default
Account Assignment: Account Assignment Category <== attribute KNT which is set as default
Assign Number: Cost Center <== attribute CNT, Asset <== attribute AN1, WBS Element <== attribute PRO (plus two custom attributes to hold value of Internal Order and Network)
Here are the questions:
(1) For GL account, we did not config combination of Product Category and Account Assignment Category in SPRO, we will create a custom attribute as mentioned above. However, where can we insert our coding to copy custom attribute value to default setting during shopping cart creation? Is class /SAPSRM/CL_PDO_USER_CONTEXT a candidate? If yes, which method should be enhanced?
(2) For Delivery Address, if we do not use standard address management and maintain value at attribute ADDR_SHIPT, we intent to use similar approach: maintain custom attribute and then populate to default settings. The same question is where can we insert our coding to copy custom attribute values to default setting during shopping cart creation?
Thanks.
Regards,
Donald

Hi Lee,
Please implement the following SAP notes in SRM 7.0
There is a product bug in SRM 7.0
1. 1450367-Default settings for Acct assignment.
2.1442277 -Default setting for delivery address.
hope it will solve your problem
Regards
G.Ganesh Kumar

Making system settings for measurement documents and measuring point

What is the significance of making system settings for measurement documents and measuring point in spro?
Edited by: Pallavi Kakoti on Jul 14, 2011 1:23 PM

Hi,
<< Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
Regrds
Jitender
Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

SPRO Settings for 0CML_INIT_BUDAT, 0CML_INIT_DDISPO,0CML_INIT_DFAELL, 0CML_DELTA & 0CML_DELTA_CAP

Similar Messages

Maybe you are looking for