SPRO settings

Hi experts,
Is it possible that,
1)In development, shall we give only "view" option for SPRO to some users and "editable" option for some other users?
2)In the production, shall we make some transactions of SPRO editable ? This is because, i had observed that in one customer place the transaction FTXP-Maintain tax code is editable in production. but in another customer place its showing production client is in not modifiable status.
Please give me some technical information about SPRO its very helpfull for me.
Regards,
Gayathry.

Hello Gayatry,
Please go to SPRO and then go to the node corresponding to FTXP which is:
Financial Accounting->Financial Accounting Global Settings>Tax on Sales/Purchases>Calculation-->Define Tax Codes for Sales and Purchases.
Just click on :"Define Tax Codes for Sales and Purchases".
Then in menu bar go to Edit-->Display IMG activity.
In the next screen go to tab strip Maint. Objects. You will find that under current settings a check box which will be checked.
Customizing transactions which have these settings maintained are maintainable in productive clients.
Regards.
Ruchit Khushu.

Similar Messages

Spro Settings for CAD Desktop

Hi Experts,
Can you please guide me what spro settings needs to be done for implementing CAD Desktop. I have gone through the SAP Library notes but still confused regarding the IMPLICATIONS of the fields under CAD Systems in spro like Group Maintenance, Applications, Parameters etc.. What are their implications and what settings need to be done?
If any of you have got SAP notes on the Implementation and Spro settings for CAD documents, Please forward me.
Thanks a lot in advance....

Hi,
for CAD Integration you also need the plug-ins for the CAD Systems. In the installation-guides for the plug-ins you also find the required settings for the CDESK customizing. In addition a lot of information - especially about the parameters - can be found in the notes (service.sap.com/notes).
More info on the plug-ins: http://wiki.sdn.sap.com/wiki/display/PLM/CADIntegrationin+PLM
Best regards,
Martin

SPRO settings for Framework page

hi,
I have made few changes in SPRO settings as below.
In a framework subarea i have added two services A and B.
in dev portal both the services A and B are visible one below the other.
where as when it is transported to QA server.
Only one service is visible.
for some users A is visible and the other "B" is not visible, where as for other user B is visible and A is not ?
the proxy classes used are standard...
Regards,
SV.

hi,
we dont have user id in QA by which i can debug the FM externally.
but if i debug the given FM (HRXSS_SER_GETAREAMENUDATA) from R/3 it shows me both the links A and B for the particular pernr.
please guide me futher.
Regards,
SV
Edited by: SAP Portal Deve on Aug 7, 2009 2:31 PM

Bi general settings and img or spro settings

Hi experts,
I am working in bi for preparing bex reports in previous projects.
Now, I am woking in new implementation project. I have blank server.
What are the steps to start the new server settings in bi 7.0?
I know the connection settings for sap r3 data sources and global settings, loading process.
I want to know about other settings like in spro what are the setting to be done for implementation and general settings.
my source system is r3 only.
Regards,
Dharani

Pathak,
Thanks for your response. The document is not helpful for what I am looking for.
I want to under what settings need to be made from BI side in CRM/ECC/BI SPRO settings.
This must be standard for all new implementations. I appreciate if someone can share.
Thanks
Raghu
Edited by: Ravi on Sep 6, 2010 6:22 PM

Pls tell me KANBAN SPRO settings

Dear friends,
I devoloped a ZPSFC_KANBAN and attatched to WEK1 output type in NACE for std print program SAPM07DR.
but when i executed PK17 tcode it is picking standard form i.e PSFC_KANBAN.
very urgent pls tell me
what should i do?
is any SPRO settings required.
VENU
SATYAM(PUNE) - 9822814468

Hi Venu,
If my guess is right KANBAN printing from PK17 doesnt use output type defined in NACE. It uses Replenishment Strategies in SPRO settings. Go to SPRO>Production>KANBAN>Replenishment Strategies.
Regards,
Karthik

SPRO settings for the Creation of treatment codes.

Hi Experts,
Let us know SPRO settings for the creation of the new treatment codes and suggest us where it can be checked once created eg. Sales order,Delivery,Invoice.
Regards,
harmesh

Hi
What is Treatment Code??
If you mean Sales Order / Delivery / Billing Document Type then you may follow the below path in SPRO :-
Order :- IMG> Sales and Distribution>Sales > sales Document>Sales Document header(VOV8)
Delivery :- IMG--> Logistics Execution > Shipping>Deliveries --> Define delivery Type (0VLK)
Billing :- IMG --> Sales & Dist. > Billing> Billing Document--> Define Billing type (VOFA)
Regards
Amitesh Anand

IMG or SPRO Settings for BI in CRM

Hi All,
We are doing a new implementation of BI primarily for CRM but the data also comes from ECC for actuals.
Can someone tell me what are the required / important BI settings that need to be done in IMG for new development.
1. IMG Settings for BI Reporting in CRM
2. IMG Settings for BI Reportign in ECC
3. IMG Settings in BI System
Any input is greatly appreciated.
Thanks

Pathak,
Thanks for your response. The document is not helpful for what I am looking for.
I want to under what settings need to be made from BI side in CRM/ECC/BI SPRO settings.
This must be standard for all new implementations. I appreciate if someone can share.
Thanks
Raghu
Edited by: Ravi on Sep 6, 2010 6:22 PM

SPRO settings in production?

Hi,
May i know whether we can do SPRO settings in Production system???
I had done some setting in Dev system and transported those objects to production!!!
But still some functionalities are missing for those objects!
has anyone done SPRO settings in production???
Raj

Hello Raj,
As you are saying that some of the functionality are missing in SPRO in production client, the reason behind this is:
The settings in production system are different then in dev/quality/test.
There is a concept of enhancment IDs and Switches/BC-set in IMG structure( hope you are aware of that), now based on the status of enhancment IDs or switches the node is displayed or hidden, the enhancment IDs or Switches might be active in dev/quality/test system but there are posibility that the same is not active in production system.
The steps to activate a switch in production system is entirely different then in dev/quality/test system
Some background information concerning BC Sets. They are
basically containers for customizing data - table entries. When a BC
Set is activated in a particular client/system, the table contents are
written into the Database (created for first time, or overwrites the
existing data). For this activation - the SCPR20PR logs give you the
status.
When it comes to a Productive client, BC Sets cannot be activated - for
security reasons. Hence, if we need customizing data from a BC Set into
a Productive client, it is always transported from a Dev or Quality
system. But, the Activation logs (SCPR20PR) in the Productive client
does not recognize any Transports. So, the logs continue to show only
the information which is particular to the Productive local client -
1) No logs if BC Set was never activated (or)
2) Error message if the client role was Productive.
This will continue to be the case, even if the BC Sets were activated
successfully in the DEV system, and transported to the Productive
client. Why ? The reason is that the transport request simply contains
Table entries.
It does not contain any Log information that can be updated into the
Productive Client.
So in future, where ever a BC Set has to be activated in the Productive
client, one must activate them in DEV/TEST system and transport them.
The logs in the productive client will continue to be unchanged even
after this transport is imported. But the required Data will be
successfully present on the Productive client already.
As mentioned remember that activation of BC Set cannot be
done in prodcution system directly. The process to follow in order to
activate a BC set in production system is to transport the activation
data from the DEV or QA system.
Follow these steps:
1. Log on to your DEV system.
2. Set the client settings to Automatic Recording of changes (in SCC4
transaction).
3. Goto transaction SCPR20 - - BC Set activation.
4. Activate the BC Set.
A pop up to enter the request number will be displayed.
5. Record the activation data in the request.
6. Release this request and import this request into the production
system.
Now the activation data will be updated in the production system.
The IMG nodes, menu nodes will be visible in the system.
Hope the information is usefull.
please reward points.
Regards
Mayank

SPRO Settings to configure the standard Workflow for PO

Hi Guys,
Please let me know the steps to configure the Standard PO workflow. I want to know the SPRO Settings for the same

Search this forum with keyword Release Procedure and you will get your answer. Ideally fnal people should configure this settings.
Thanks
Arghadip

SPRO settings to be reviewed after BI Upgrade

Hi Experts,
Can you please forward me what are the SPRO settings to be taken care of after upgrading to BI 7.0, please forward me any links recommended by SAP.
Thank You!
AM

Hi,
Pls chk& configure the following settings :
General Settings like printer settings, fiscal year settings, ODS Object Settings, Authorisation settings, settings for displaying SAP Documents, etc.
1. maintain permitted characters (transaction rskc), fill with ALL_CAPITAL to allow all special characters
2. printer setup (trx SPAD)
3.parameter for aggregate (trx rscustv8), aggregate change run, this can be done later or adjust if finding any loading problem
4upload mode for master data
5.ods setting (trx rscusta2), ods data loading performance impact
Links to other systems : like links between flat files and BW Systems, R/3 and BW, and other data sources, link between BW system and Microsoft Analysis services, and crystal enterprise....etc.,
1.maintain control parameter for data transfer(rscustv6) - data loading
2.general connection setting
define logical setting, assign logical setting to client etc.
3.ink between bw and flat file (rscustv1)
setting for flat file upload, override in infopackage
4.link between sap system and bw (rscustv3)
do the first time after bw installation
UD Connect Settings : Like configuring BI Java Connectors, Establishing the RFC Desitination for SAP BW for J2EEE Engine, Installation of Availability monitoring for UD Connect.
Automated Processes: like settings for batch processes, background processes etc.,
Transport Settings : like settings for source system name change after transport and create destination for import post-processing.
1.change source system after transport (RSLGMP)
for mapping source system, done in TARGET (qa/prod)
Reporting Relevant Settings : Like Bex Settings, General Reporting Settings.
1.activate personalization ... (rs_pers_activate)
mostly all are used, but can be done later
web based setting
1.igs setting (if you use chart in web reporting)
Settings for Business Content : which is already provided by SAP.
Please check the links below.
http://www.sap-img.com/business/what-is-spro-in-bw-project.htm
Re: Transaction Codes
Regards.
CSM Reddy

EBRS - MT940 format - no transaction types available in SPRO settings

Hello Experts,
I got bank statement in MT940 format. I checked SPRO settings for electronic BRS. I checked in node create transaction type. However, I didn't find transaction type for MT940 format. How to get such transaction types in SAP.
Please refer screenshot and help me on how to get the transaction type for MT940.
Meena

Hello Meena,
Transaction type which are mutually agreed by business and Banker's and which same has to be configure as mentioned in spro.
Financial accounting New > Bank accounting>Business transactons > Payment transactions > Electronic Bank statement > Make global settigns for EBS > where you have seen create trasnction code types as folder. Double click on that and maintain the same
Regards
Mani

FI Payment Release Workflow Agent assignment and SPRO settings.

Hi Experts,
I am working on Payment release workflow for 2 stages. So for this i have activated the main workflow WS00400012 and for First level release WS00400011 and for second level release WS00400021.
Now where should i assign the agent for First level release and second level release ? and what setting should i do in SPRO as FI settings.
Any of you suggestions will be of great help me to resolve this issue.
Regards,
Hari

Hi,
Thank you for your reply.Should i mention the main workflow number in SPRO or
just the subworkflows alone ?.
Assign main workflow number
Can i assign users directly in workflow itself insteas of assigning position in SPRO.
Don't assign users inside the workflow, if the user id you want to change then again you have to change the workflow.
Regards,
Surjith

Spro settings required to do Reservation?

Hi Gurus,
what are the settings required to do reservation?
pls help..

Hi,
you need to check the customization settings in SPRO MM -- Inventory Management and Physical Inventory --- Reservation
Most imp is in OMBK it chould be checked against your t- code

Plant specific BOM creation SPRO settings

Hello,
My requirement is User must be able to create plant specific BOM creation. For this, Do we need to do any SPRO config in Material master side? or any other settings needs to be done? Kindly let me know... Thanks!!
Regards,
Saravana

Hi Saravana,
As such there is no SPRO setting for it.
Please check the authorization object C_STUE_WRK -CS BOM Plant (Plant Assignments)
Regards,
R.Brahmankar

Assignment of Sales org in Intercompany -SPRO settings

Hi,
For Intercompany billing process in Spro we maintain the settings for organisation Units by Plant.
Can anyone guide me the relevance for the same.
Regards

Hi
Sales org 1000,dist channel10,div 00 plant 1000,CC 1000
This is one set up
Sales org 2000,dist channel20,div 00 plant 2000,CC 2000
This is another set up
Normal scenario would be Sales org 1000,dist channel 10 assigned to plant 1000 so that a sales process can smoothly happen in this setup
Another scenario would be Sales org 2000,dist channel 20 assigned to plant 2000 so that a sales process can smoothly happen in this setup
In Intercompany we assign Sales org 1000,dist channel 10 to plant 2000 or Sales org 2000,dist channel 20 to plant 1000
(ifyou want to sell a material from a plant thro one sales org that plant has to be assigned as a delivering plant for that sales org and dis channel in enterprise structure assignment and it is a must)
This means that we are telling the system this plant 2000 which is assigned to the CC 2000 can be a delivering plant for Sales org 1000(assigned to CC 1000),dist channel 10
Otherwise there will be error and no link between plant 2000 and sales org 1000 and ultimately no link between CC2000 and CC1000
So in the sales order when you put a plant of another company code the system senses it is a intercompany process and the pricing requirements and PI01 condition type everything will trigger
This is a major step in informing the system or making a link between the two company codes
Note this has to be done in enterprisestructure (assign sales org and dist channel to plant)and below the billing also (which you mentioned) in two places
Regards
Raja

SPRO settings

Similar Messages

Maybe you are looking for