SPro | SQR APY1060 is randomly generating Corrupted PDF's

Hi,
We're in the process of implementing SPro FSCM 8.9 on 8.47.11 for one of our clients. While the running the OOB SQR APY1060, we've found that the SQR randomly generates corrupted PDF. When we run the Process again, it works fine...Its is also difficult to replicate in other environments.
Has any body faced an issues like this earlier with any PS delivered SQR.
We've been able to zero in on the culprit - Control-M ... We've noticed a pattern, using the same run control ID, if we run it (PSJob) using the online page, then the PSJob runs absolutely fine. However, when we schedule it through Control-M the corruption happens. Also, if we create separate Process Requests in Control-M to schedule individual processes rather than the OOB PSJob, the SQR runs fine...Not sure if some one has come across such an issue...
Thank You
Prashant
Edited by: PSFT_PP on Feb 9, 2009 8:47 AM

I am not sure about this..but do you have different run control for the different OS or the same run control. Unix always recognises CAPS runcontrol values. do a check on that please.

Similar Messages

"Save as pdf" generates corrupt pdfs

Hello everybody,
I have a problem with the "save as pdf" option in the printing menu. When generating the pdf for a document which contains bitmapped embedded images, the actual images in the pdf file are corrupt when opened on a windows/linux machine with the latest version of acrobat reader.
If I open the document on a mac, either with preview or with acrobat, it looks fine. The problem seems to be the compatibility of the generated pdf with the windows/linux version of acrobat reader.
Moreover, the problem happens randomly when printing either from Pages or Keynote, so I think it is not an application-dependent issue. I tried also to save as pdf-X but this does not solve the problem.
Some idea on how to fix this compatibility issue on the Tiger's internal pdf generator?
Thank you very much,
Vittorio

Stuck files in the queue sounds like a problem I had with Acrobat X. The
10.0.1 patch broke the Adobe PDF printer, so that it tried to use the
COM1: port, instead of the Documents or Desktop port. (You can check for
this by right-clicking the Adobe PDF printer, choosing "Printer
Properties," then selecting the "Ports" tab.) In fact, it deleted those
ports! (Here's a link to that problem:
http://kb2.adobe.com/cps/893/cpsid_89330.html). The result was PDFs that
would not print, and would be left stuck in the printer queue. The fix
was to delete the Adobe PDF printer, then run the Acrobat repair option
to regenerate it. You might want to do this. Following are the
directions for Windows 7. Windows XP instruction are included at the
link above.
          *Windows Vista (UAC on, nonadmin user), Windows 7 (UAC on,
          admin user)*
1. Close all PDF files.
2. Go to Printers and Faxes (Windows XP), Printers (Vista) or Devices
    and Printers (Windows 7).
3. Right-click the Adobe PDF printer and click Delete (Windows XP,
    Vista) or Remove Device (Windows 7).
4. Enter the admin credentials. This step deletes the Adobe PDF printer.
5. Go to Programs and Features (Vista and Windows 7).
6. Select Adobe Acrobat X Pro or Standard and click Change.
7. Select Repair and follow instructions to complete repair.**
By the way, I don't think this was mentioned earlier, but another cause
of problems with PDF generation is having more than one installation
and/or version of Acrobat, Adobe Reader, or the PDF creation add-on that
comes with FrameMaker installed simultaneously. If you have Acrobat, you
should NOT have Adobe Reader or the PDF creation add-on installed on the
same computer, and you should have only one version of Acrobat installed.

R12 : System Failed to generate the PDF Document.

I am trying to create a PO thru auto create but I hit inquire > View Document , I encountered an error: System Failed to generate the PDF Document. Please contact your system administrator. We just updgrade our instance from 11.5.2.10 to r12.1.2. Any thoughts?
Thanks,
Leo

Please see if these docs help.
System Fails To Generate PDF Document After Clicking "PDF Document" On Supplier Notification When Different Languages Are Used [ID 1078546.1]
PO Email From Tools>Communicate At Same Time of Approval Corrupts PDF File Transmits As .HTML & System Failed to Generate PDF [ID 1287488.1]
Thanks,
Hussein

Report Builder 10 Crashing while generating to pdf

I can get a report to show all the pages in previewer mode.
However, when attempting to generate to pdf, report builder crashes at random times. Not at just one page, but whenever it feels like it.
Report is 4,000 pages, but I've ran 15k page to pdf before. And it is NOT the report, it crashes on all reports.
We've had some recent windows security updates pused to us recently, but that is it as far as system changes go.
Environment:
Win XP, SP3
Report Builder 10.1.2.0.2
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production

Report Builder 10.1.2.0.2That is the base version of Developer Suite that you can download on OTN. I would at least start with upgrading to the latest patch, especially since you connect to an 11g database.
Another thing: do you have this problem in Reports Builder, or on the application server? Latter case: check your AS version against the certification matrix too.
Edited by: InoL on Jan 27, 2011 11:37 AM

Generating a PDF from a OTF (imported from CLOSE_FORM) and send it by mail.

Hello!
I have a problem.
I'll try to explain it toy you.
I have a SapScript that the user has the option to send it to the printer or have a Print Preview. I need to send it by mail in PDF format.
If the user select PRINT, a spool id is created, I can get the OTF, generate the PDF and send it by mail. Everything OK with that.
The problem is if the user select PRINT PREVIEW I don't get a spool id. So, what I did is to get the OTF from the CLOSE_FORM MF and generate de PDF from there. I tried several FM to generate the PDF but for sure I'm doing something wrong, because or the PDF is corrupted or I have a problem with the parameters in the SO_NEW_DOCUMENT_ATT_SEND_API1 FM.
So, what I need it: Generate a PDF from a OTF imported from CLOSE_FORM FM and send it by mail.
Examples or the FM I can use are welcome.
I tried to do search here, but I couldn't find anything that may help me..
So, please... Show me the light!!!
Thanks!!!
Bettina

Part 3
* Send Report
clear:    maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
refresh: mailtxt, mailbin, mailpack, mailhead, mailrec.
* Creation of the document to be sent File Name
maildata-obj_name = 'REPORT'.
* Mail Subject
maildata-obj_descr = 'Your Report'.
describe table mailtxt lines tab_lines.
read table mailtxt index tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + strlen( mailtxt ).
* Creation of the entry for the compressed document
clear mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
append mailpack.
* Creation of the document attachment
loop at solisti1.
    move-corresponding solisti1 to mailbin.
    append mailbin.
endloop.
describe table mailbin lines tab_lines.
mailhead = 'REPORT.OTF'.
append mailhead.
** Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-obj_name = 'ATTACHMENT'.
mailpack-obj_descr = 'Some Report'.
mailpack-doc_size = tab_lines * 255.
append mailpack.
mailrec-receiver = lv_email_address. "<-- a valid email address
mailrec-rec_type = 'U'.
append mailrec.
* Sending the document
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = maildata
            put_in_outbox              = 'X'
       tables
            packing_list               = mailpack
            object_header              = mailhead
            contents_bin               = mailbin
            contents_txt               = mailtxt
            receivers                  = mailrec
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            operation_no_authorization = 4
            others                     = 99.
Regards,
Rich Heilman

Illustrator CS4 - frequently generates corrupt EPS files that will not parse

I have used many versions of Illustrator prior to and including the CS lines. I am currently running CS4 and this is the first time I have experienced this issue. Approximately half of my EPS formatted illustrator files will not parse. I use Quark Xpress 7 for my layout (never liked any of the Indesign programs). If I try to generate a PDF with my CS4 generated EPS files placed at least 60% of the time the placed file will corrupt the PDF export resulting in no PDF being generated.
Further to this PDF export issue, if I attempt to parse the same EPS file into Photoshop, Photoshop will give me the error message "Could not complete your request because Photoshop was unable to parse the PostScript" and it will abort the attempt to open the file.
Anyone else having Illustrator EPS file issues?
Background info (if needed) Dual 2.0 Ghz, PowerMac G5, 8 gb RAM, running Tiger 10.4.11
I have attached a sample Illustrator file that will not Parse. It will open in Illustrator but not parse into Photoshop or if placed in Quark will not parse and allow for a PDF to be exported.

Thanks for taking the time to write Steve.
I understand that I can drag and drop between programs. Ultimately, when attempting to parse an EPS in photoshop I am merely doing it to confirm that the EPS is indeed corrupt.
As mentioned previously, I predominately use Quark Xpress for my page layout program and until I installed CS4 I have had zero complications with using EPS files. Now I quite commonly can not export PDFs due to corrupt EPS files.
My question to the public is I am alone in this glitch or do others experience the same issue. My first thoughts are that CS4 has a glitch and I should be expecting an update in the near future. But, if I am the only person suffering from this issue than maybe I should be looking at my own software.

RenderPDFForm is generating big pdf files

hi,
In a workbench process Im generating a xdp file that I convert to a PDF file using the renderPDFForm component. This is working, however, the generated PDF document is not being compressed. In the renderPDFForm properties I can´t find any property to compress the pdf file.
My guess is that the component is generating the pdf with fonts included...
What can I control this?
thank you

Embedding the font shouldn't make your file size too large. To answer about XCI URI question, I have no idea. I've not done any work with that functionality. Some things you can check though:
1. If you have images anywhere in your XDP/PDF, make sure they are NOT embedded. This can be checked in LiveCycle Designer in the properties for each individual image. Images really crank up file size.
2. Make sure your form is only a dynamic PDF form if you need it to be.
3. Make sure ONLY the fonts that you need are embedded. Say you only need to show Courier to the user. It may be possible that other fonts are embedded in weird places too. Sometimes captions that have no text, but are in a different font, will cause that font to also be embedded. Sometimes an empty "" part of a text field somewhere is set to a different font. It's a pain, but Ctrl + F through the XML view of your form to try to find any random places an extra font could be set.
As far as the compression goes, I was unaware that FormsService even compressed the PDF by default, but that doesn't mean it shouldn't. It's possible I've just never investigated it. But if you have a pretty complex form with a lot of XML data, it's not uncommon for a PDF to end up a couple MBs in size, especially if there are a lot of repeatable subforms/table rows in the form.

Dynamically Generated HTML/PDF/RTF?

Hi guys,
This is similar to something I asked recently, but I've got a better idea of what I need and how to ask. I'm still fairly novice at programming, espeically applets.
I'm working on an applet for an educational purpose that will generate an array of study items...probably 30-50, I haven't decided on the size yet. It's for foreign language study, and the items are foreign phonetic characters, no more than 3 per item. I'd like to output them in a print-ready format, probably essentially a grid, with some space for the student to write their answer next to or under it. I've seen some free libraries out there that can generate pdf, rtf, and HTML, most notably the iText libraries.
I really want to do this as an applet. So my question is, how would this, or another library that one of you knows that would be better, be implemented? Would the output be a file on the server? Is there a way to make it generate the file to the users local cache or something, or give them an option to download it without it going on a server, since it is randomly generated and not uniform for other users? (I assume that would require making it a signed applet?)
Any help you can give would be really appreciated.
Colin

cosmic_cow wrote:
Okay, but this would work very well as a web application.What's a good resource for learning to work with them as opposed to applets? (Told you I'm a novice! ) Well, if you're a novice it might be better to concentrate on the regular Java stuff and sure, applets too.
Then if you feel interested in Java EE and Web Applications and Databases and what not, you can check out this to see what Enterprise Java consists of.

Randomly Generated Pixels

Hi!
I want to create a script that creates random (or near random) values for every single pixel of a document, similar to the "Add Noise..." filter, but with more control, such as "only b/w", "only grey", "all RGB" and "all RGB with alpha" and maybe even control over the probability distribution. Any idea how this could be tackled? Selecting every single pixel and applying a random color seems like something that would take a script hours...
Why do I need this?
I've started creating some filters in Pixel Bender (http://en.wikipedia.org/wiki/Adobe_Pixel_Bender). Since Pixel Bender doesn't really have any random generator (and workarounds are limited) I'm planning on passing on the random numbers through random pixel values. I'm well aware that this can only be used for filters in which Pixel Bender creates images from scratch, but that's the plan.
Thanks!

Understanding the details of the Add Noise filter is probably beyond the scope of just a short post. Here is an approach to start learning what it does.
- Take a 50% gray level and make it a Smart Object.
- Open up the historgram panel (should show a spike right at 50%)
- Apply noise filter to Smart Object in monochrome building up from small percentages in small increments
- You will notice that for this option above, you end up with a uniform probability function over the entire tonality spread at 50% applied for uniform distribution.
There are a variety of ways to manipulate this function, through various blends.
Please note a couple things
1) I am using CS5 and though not documented anywhere that I have seen, the Noise Filter does work different than in CS4. In CS4, if you run the same noise filter twice on two identical objects, my experience is that you get the identical bit for bit result ( a random pattern yet not independent of the next run of the filter). Manipulating Probability Density Functions (PDFs) per my previous post requires that each run of the Noise Filter starts with a different "seed" so that the result is independent of the previous run. CS5 does this where succesive runs will create an independent noise result.
2) PS does not equally randomize R, G, and B. There are ways to get around this yet wanted to give you a heads up.
3) There are other ways to generate quick random patterns outside of PS and bring them in (using scripts). You would need to understand the format of the Photoshop Raw file. This type of file contains bytes with just the image pixel data. These types of files are easy to create and then load into PS. From a script (or even faster call a Python script) create this file and then load it into PS as a Photoshop Raw format file and use as an overlay. There is not question that this is faster than trying to manipulate individual PS pixesl through a script.
4) Please not the under Color Settings there is an option called Dither. If this is set, there are times where PS adds nosie into the image (I leave mine turned off). If is used in a number of places in PS other than what the documentation implies (more than just when moving between 8 bit color spaces)
Good luck if you are going after making a plug-in. I have never invested in that learning curve. Good luck.

XML Publisher Report not generating the PDF output.

Hi,
I am trying to develop a XML Publisher Report in R12 Vision Instance.
I have developed the rdf report and concurrent program with XML as output format. Ran the concurrent program and I got the XML output. Based on XML output I have created the rtf template. Using both the template and xml output I have created in Data Definition and Template in XML Publisher Administrator Responsibility. Now I am comming to the concurrent program and running the program, here instead of generating the PDF output it is generating again the XML output and concurrent program completing with warning status.
When I am trying to do the same in 11i Vision Instance, Concurrent Program completing with normal status and when trying to view the output it is saying "Unable to Publish output for the Processed Request".
Kindly please help me out in this issue.
Thanks,
Manasa.

Hi Mahesh,
Here the concurrent programs are not erroring out. It is completing with Warning status and when we click on View Output the output is coming in XML format instead of PDF, this is in R12 Vision Instance.
In 11i Vision Instance, concurrent program is completing with Normal Status but when we click on View Output it is saying "Unable to Publish output for specified request".
Thanks,
Manasa.

Getting "SYSTEM ERROR" while generating a PDF in a Workflow method.

Dear All,
I'm getting a "SYSTEM ERROR" when I'm calling the below function module in a Workflow BO Method.
CALL FUNCTION wa_funcnm
   EXPORTING
     /1bcdwb/docparams = fp_docparams
     invoice                     = invoice
   IMPORTING
     /1bcdwb/formoutput = fp_formoutput
   EXCEPTIONS
     usage_error        = 1
     system_error       = 2
     internal_error     = 3
     OTHERS             = 4.
The aim is to generate the PDF and store it in DMS. Please let me know, if I'm going wrong somewhere. Any kind of inputs would be sincerely appreciated.
Regards,
Tushar.

Hi Tushar
You need to the following parameters when calling FM. Background WF process cannot handle dailog.
fp_outputparams-nodialog = 'X'.
fp_outputparams-getpdf   = 'X'.
Refer to Thread below
Creating Attachments to Work Items or to User Decisions in Workflows
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
i_name     = l_formname
    IMPORTING
e_funcname = l_fm_name.
*   E_INTERFACE_TYPE           =
fp_outputparams-nodialog = 'X'.
fp_outputparams-getpdf   = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel          = 1
usage_error     = 2
      system_error    = 3
internal_error = 4
OTHERS          = 5.
IF sy-subrc <> 0.
    CASE sy-subrc.
      WHEN OTHERS.
ENDCASE. " CASE sy-subrc
ENDIF.
fp_docparams-langu = 'X'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
CALL FUNCTION l_fm_name
    EXPORTING
/1bcdwb/docparams = fp_docparams
emp_info           = fs_per_info
    IMPORTING
/1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
EXCEPTIONS
usage_error        = 1
      system_error       = 2
internal_error     = 3
OTHERS             = 4.
IF sy-subrc <> 0.
    CASE sy-subrc.
      WHEN OTHERS.
ENDCASE. " CASE sy-subrc
ENDIF.                               " IF sy-subrc <> 0
CALL FUNCTION 'FP_JOB_CLOSE'
*   IMPORTING
* E_RESULT             = result
   EXCEPTIONS
usage_error          = 1
system_error         = 2
internal_error       = 3
OTHERS               = 4
IF sy-subrc <> 0.
    CASE sy-subrc.
      WHEN OTHERS.
ENDCASE. " CASE sy-subrc
ENDIF.                               " IF sy-subrc <> 0.
ENDFORM.                    " GET_FUNCTION_MODULE
*& Form CONVERT_PDF_BINARY
FORM CONVERT_PDF_BINARY .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
BUFFER                = FP_FORMOUTPUT-pdf
*   APPEND_TO_TABLE       = ' '
* IMPORTING
* OUTPUT_LENGTH         =
    TABLES
BINARY_TAB            = t_att_content_hex .
ENDFORM.                    " CONVERT_PDF_BINARY
Regards
Sandy

How to preserve a background color, when generating a PDF file

I am trying to create a PDF file from some application. Please note that the picture in this application has the black background. So I invoke a Print command and set a printer as "Adobe PDF". As a result, I have generated
a brilliant PDF file of my picture, but on the WHITE background. When selecting the Adobe PDF printer, I have looked through all its settings ( in the Adobe PDF settings, I have found several tabs: General, Images, Fonts, Color, Advanced, PDF/X), none of them generated the original background color.
So how can a generate a PDF file, having the original background color (black, in my case) ?
Oleg

Now I feel that the background definition in the Adobe PDF printer and the background definition in the application the Adobe PDF printer is invoked from -- two different things. So I guess how can I define the black background in the Adobe PDF printer? I cannot find such settings.

How to generate a PDF output using batch file in 10G

Hello,
I am using .bat file to generate a report PDF output. I have done this many times in 6i but for 10G I am unable to do the same.
Can someone please look at the syntax below and let me know where I am going wrong.
I understand that reports are different for 6i and 10G specially .rep file but I am sure we should be able to generate a PDF file using 10G. Please let me know.
Thanks
IQ
Contents of .bat file follow
ECHO Opening parameter form. Please do not close this window.
C:\
FOR /F "tokens=1 " %%I IN ('time /t') DO (SET _TIME=%%I)
FOR /F "tokens=2 " %%I IN ('date /t') DO (SET _DATE=%%I)
SET EXP_DATE=%_DATE:~6,4%%_DATE:~0,2%%_DATE:~3,2%_%_TIME:~0,2%%_TIME:~3,2%
SET FILENAME=SEND_EMAIL_%EXP_DATE%_%USERNAME%.PDF
CD C:\Users\Documents
RWCONVERTER REPORT=C:\Users\Documents\send_email.rep USERID=scott/tiger@ORCL1 ORIENTATION=LANDSCAPE DESFORMAT=PDF DESTYPE=FILE
DESNAME=C:\Users\\%FILENAME% PRINTJOB =NO

Rwconverter is not used to run reports:
rwconverter (Reports Converter) enables you to convert one or more report definitions or PL/SQL libraries from one storage format to another.
I think you mean rwrun:
rwrun (Reports Runtime) runs a report by starting its own in-process server (not to be confused with the default in-process Reports Server), which runs in the same JVM as the rwrun process.
This bat file has to run on the server. There is no Reports installation on the client anymore.
If you want to run a report from a client, you can make a bat file that calls the report url
See: http://download.oracle.com/docs/cd/E14571_01/bi.1111/b32121/pbr_cla002.htm#i634710

Any way to repair corrupted pdf file?

I created a pdf document on a my PC and it became corrupted with all these strange characters.
Now when I open the document I get an error message that wasn't coming up before im hoping this msg will bring some light into the situation.
If anyone can help me id be very thankful

General Repair of Adobe Acrobat Reader corrupted .pdf file...
1. Go to adobe official site, click the "Support" tab on the top of the screen, click on "Adobe Reader," and then select the "I can't open a PDF document" statement underneath "Troubleshooting." The Support tab is located near the top of the screen as a white word against a black backdrop. After clicking Support, you will see the phrase "Product Support Centers" on a new page in bold white font, under which is "Adobe Reader." The new page after clicking "Adobe Reader" will have the word "Troubleshooting" underneath the phrase "Adobe Reader and Help Support." Underneath "Troubleshooting" is "I can't open a PDF document."
2. Follow the instructions on how to complete a general repair and installation of Adobe Acrobat Reader. To attempt the most basic PDF repair method, Open "Adobe Acrobat Reader" (select the program in your Start menu, which is on the bottom-left part of the screen), select "Help" from the gray tab menu at the top of Adobe Acrobat Reader, and click on "Repair Adobe Reader Installation." A meter should pop up indicating that your Adobe version is being checked for errors and is being linked back to the home Adobe official website just in case you need to download a new update of the program. If you need to download an updated version of the program, another pop-up will appear on your screen asking you if you want to update Adobe. Click "Yes."
3. Reopen the PDF file. It should now be readable. If not, then try the next set of directions.
4. If nothing helped, and you can't redowload .pdf file from source where it was, then use third party solution PDF On-line repair service https://onlinefilerepair.com/en/pdf-repair-online.html

Not able to generate PO Pdf attachment

Hi,
I encountered one problem of po pdf cannot be generated in oracle.
When this happened, i had rebounced server and restart workflow, but problem still not solving..
Steps to duplicate:
1. Go to Purchase Order Screen
2. Click Inquiry->View Document to generate pdf document.
3. Error message below appear in screen
Problem: The system could not generate the PDF document.
Reason: The system detected an error in the following code/object.
Code: XML
Object: PO
Action: Please contact the system administrator and try again.
4. i try again to run concurrent program PO Output for Communication with parameter test = debug
there is error message as below:
Retrieved the Document XSL Tue May 24 19:22:34 MYT 2011
Calling the getPOXml method
GenerateDocument::getPOXml() : l_exists 1
GenerateDocument::getPOXml() : m_whichTables MAIN
GenerateDocument::getPOXml()- Calling the POXMLGEN method Tue May 24 19:22:34 MYT 2011
GenerateDocument::getPOXml() - Exception
genDoc() : PoPDFExceptionoracle.apps.po.communicate.PoPDFException: PO_PDF_XML_FAILED
oracle.apps.po.communicate.PoPDFException: PO_PDF_XML_FAILED
oracle.apps.po.communicate.PoPDFException: PO_PDF_XML_FAILED
     at oracle.apps.po.communicate.PoGenerateDocument.getPOXml(PoGenerateDocument.java:1045)
     at oracle.apps.po.communicate.PoGenerateDocument.genDoc(PoGenerateDocument.java:1989)
     at oracle.apps.po.communicate.PoGenerateDocumentCP.runProgram(PoGenerateDocumentCP.java:323)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
May i know how i can solve this problem as this affect to all POs in oracle
Thanks a lot

Please see these docs.
PO_PDF_XML_FAILED Exception When Running POXPOPDF PO Output For Communication [ID 434128.1]
POXPOPDF oracle.apps.po.communicate.PoPDFException: PO_PDF_XML_FAILED [ID 437288.1]
POXPOPDF:PO Output For Communication fails with Missing Expression Error for Blanket Releases [ID 889904.1]
How To Debug The Issues With 'PO Output for Communication' For PDF Generation [ID 1273801.1]
PO Output For Communication Fails For 11i Purchase Orders Revised In R12 [ID 966502.1]
Thanks,
Hussein

SPro | SQR APY1060 is randomly generating Corrupted PDF's

Similar Messages

Maybe you are looking for