Sproxy configuration using table SPROXSET

Hi guys,
we are working in a complex environment with PI and one ECC using one lan and another ECC using a different lan.
For the second ECC to run sproxy transaction (and use a proxy server with an http destination type G) we have configured the proper entries in SPROXSET table. But we also have to maintain the connection parameters in PI exchange profile for the other ECC system.
The report SPROX_CHECK_IFR_ADDRESS, when reading SPROXSET data, checks if SAP_BASIS component is changeable but, as it is only partially modifiable, correct login data are not considered.
From Transport Organizer Tools we cannot set SAP_BASIS modifiable.
Does anybody know how to manage this situation without modify sap standard object?
Thnks to all!
Ilaria

Hi Ilaria,
To run SPROXY transaction you need to configure first the conection with the SLD with the transaction: SLDAPICUST.
Did you executed the transaction SXMB_IFR and SLDCHECK to check the conection?.
Check more details in this link:
http://help.sap.com/SAPHELP_NW04S/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Best Regards
Luis Bernal

Similar Messages

Configurable material tables

Hi,
Could anyone suggests how to get the detailed information (selected characteristics) for a configurable material in a sales order? What are the tables to look for (from VBAP, MARA...)? Any function modules?
Thanks!
Steven

there are the useful tables relating to variant config.
SDCOM, MMCOM <<COMM STRUCTURES VARIANT CONFIG>>
MARA General material data
MARC Plant data for material
CUCO Master data table for configuration profiles
VBAP Item data for sales document
INOB Assignment of an internal number to any object
MAST Link between material and bill of material
KDST Link between sales order item and bill of material
AUSP Values assigned to characteristics
KSSK Assignment table: object to class
CUOB Assignment of object to dependencies
STPO BOM items
CABN Master data for characteristics
KLAH Master data for class header
KSML Assignment of characteristics to classes
CAWN Master data for characteristic values
CUEX Dependency compilation
CUKB Administrative information on dependency maintenance
CUKN Dependency source code base for variants/configuration

How to find the configuration use the Z message class.

Usually when I do some configuration, it may need to create some message. such as the Validation.
It raise a message when I run some standard t-code. So when I check some Z message class to find what program use this message, i can not find anything. So I assume there might two situation:
1、we can not trace it dome when the program didn't write like this way:    MESSAGE E003(ZFI).
2、this message might be used in some configuration,not in program.
so how do we find the configuration use this message? or Is there any way can trace all message ?
Thank you so much for your sincere answer.

Hi,
Case 1: Message is defined correctly with message number & message class.
     Example - Message E003(ZFI).
Easy to locate the message using whereused list.
Case 2 :
There are some FM's like BALW_BAPIRETURN_GET where we pass the message details.
For example :
call function 'BALW_BAPIRETURN_GET'
        exporting
             type       = p_message-msgty
             cl         = p_message-msgid
             number     = p_message-msgno
             par1       = p_message-msgv1
             par2       = p_message-msgv2
             par3       = p_message-msgv3
             par4       = p_message-msgv4
*          LOG_NO     = ' '
*          LOG_MSG_NO = ' '
        importing
             bapireturn = p_return
        exceptions
             others     = 1.
In these case, we won't be able to track the message number from where used list. So, what we do is before calling these FM we use the below statement,
IF 1 = 2. message e003(zfi). ENDIF.
    so that message can be tracked using where used list.
Case 3: Some messages can be configured in message control.( Table T100S ) . For those
messages we search for table T100S in the program.
Regards,
DPM

Help - using table as RFC input

Dear all,
I'm new to web dynpro.I've just created a program to create PI doc. I had already import the module as well as configure the JCO.
Bapi_Matphysinv_Create_Input input = new Bapi_Matphysinv_Create_Input();
wdContext.nodeBapi_Matphysinv_Create_Input().bind(input);
input.setHead(new Bapi_Physinv_Create_Head());
how should i declare the table as input for RFC? any example for using table as RFC input? i had already look into the TutWD_Flighlist...but it seems doesnt do me any good.. pls help and advice. Thank you.

Hi Joan,
1. Create a value node in your context.
2. Add value attributes to this all those required for your input to BAPI(Keep its
    type same).
3. Bind this node to table UI element and keep all the column type as input field
    so that you can enter value in that at runtime.
4. Now in you action where you execute BAPI just before that set all these values from node to model node.
eg.
Bapi_Matphysinv_Create_Input input = new Bapi_Matphysinv_Create_Input();
Bapi_Physinv_Create_Head() head =new Bapi_Physinv_Create_Head();
for(int i=0; i<wdContext.node<valueNode>().size();i++)
head.set<Attribute>(wdContext.<valueNode>().get<ValueNode>ElementAt(<index>).get<attributeName>);...
input.addHead(head);
wdContext.nodeBapi_Matphysinv_Create_Input().bind(input);
    try
    wdContext.currentBapi_Matphysinv_Create_InputElement().modelObject().execute();
    wdContext.nodeOutput().invalidate();
    catch(Exception e)
Regards,
Murtuza

How to use table maintenance view in module pool screen

hi ,
want to use table maintenance view in a module pool screen so that i can edit, insert, delete and update date in to the ztable.please help.

You can simply call it via SM30.   Or you can call the table maintence view from any program(report or module pool) using a function module.
call function 'VIEW_MAINTENANCE_CALL'
       exporting
            action                       = 'U'
            view_name                    = 'Z_Table_Name'
       exceptions
            client_reference             = 1
            foreign_lock                 = 2
            invalid_action               = 3
            no_clientindependent_auth    = 4
            no_database_function         = 5
            no_editor_function           = 6
            no_show_auth                 = 7
            no_tvdir_entry               = 8
            no_upd_auth                  = 9
            only_show_allowed            = 10
            system_failure               = 11
            unknown_field_in_dba_sellist = 12
            view_not_found               = 13
            others                       = 14.
Regards,
RIch Heilman

Derive found flag in SQL with where clause using TABLE(CAST function

Dear All,
Stored procedure listEmployees
==========================
CREATE OR REPLACE TYPE STRING_ARRAY AS VARRAY(8000) OF VARCHAR2(15);
empIdList STRING_ARRAY
countriesList STRING_ARRAY
SELECT EMP_ID, EMP_COUNTRY, EMP_NAME, FOUND_FLAG_
FROM EMPLOYEE WHERE
EMP_ID IN
(SELECT * FROM TABLE(CAST(empIdList AS STRING_ARRAY))
AND EMP_COUNTRY IN
(SELECT * FROM TABLE(CAST(countriesList AS STRING_ARRAY))
=================
I have a stored procedure which lists the employees using above simple query.
Here I am using table CAST function to find the list of employees in one go
instead of looping through each and every employee
Everything fine until requirements forced me to get the FOUND_FLAG as well.
Now I wanted derive the FOUND_FLAG by using rownum, rowid, decode functions
but I was not successful
Can you please suggest if there is any intelligent way to say weather the
row is found for given parameters in the where clause?
If not I may have to loop through each set of empIdList, countriesList
and find the values individually just to set a flag. In this approach I can’t use
the TABLE CAST function which is efficient I suppose.
Note that query STRING_ARRAY is an VARRAY. It is very big in size and this procedure
suppose to handle large sets of data.
Thanks In advance
Regards
Charan
Edited by: kmcharan on 03-Dec-2009 09:55
Edited by: kmcharan on 03-Dec-2009 09:55

If your query returns results, you have found them... so your "FOUND" flag might be a constant,...

Using Table Control

Hi Experts,
I am working on module pool Program using " Table Control ".
the below code is a part of program.
" Here i want insert new lines ( New values ). Please tell me that how to Do? "
MODULE USER_COMMAND_0100 INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK.
    WHEN 'INSERT'.
   " Here i want insert new lines ( New values ). Please tell me that how to Do? "
    WHEN 'TOGGLE'.
      LOOP AT EMPLOYE-COLS INTO COLS WHERE INDEX GT 2.
        IF COLS-SCREEN-INPUT = '0'.
          COLS-SCREEN-INPUT = '1'.
        ELSEIF COLS-SCREEN-INPUT = '1'.
          COLS-SCREEN-INPUT = '0'.
        ENDIF.
        MODIFY EMPLOYE-COLS FROM COLS INDEX SY-TABIX.
      ENDLOOP.
    WHEN 'DELETE'.
     READ TABLE EMPLOYE-COLS INTO COLS WITH KEY SCREEN-INPUT = '1'.
      IF SY-SUBRC = 0.
        LOOP AT ITAB INTO ZEMPLOYE WHERE EMPID = 'X'.
          DELETE ITAB.
        ENDLOOP.
      ENDIF.
ENDCASE.
ENDMODULE.
Its Urgent
Thank You.
Basu

Hi,
WHEN 'INSERT'.
" Here i want insert new lines ( New values ). Please tell me that how to Do? "
<b>Append initial line to EMPLOYE.</b>
Or
Change the table control attribute for rows.
Reward if helpful.

I prepare chronologies in word, and i am trying to do the same in pages using tables and cells. But somtimes i need a cell to wrap onto the next page but I can't work out how to do it - any suggestions would be greatly appreciated

I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page, but I can't work out how to do it - any suggestions would be greatly appreciated

brendanfromsydney wrote:
What are the different opinions on why pages should not achieve this?
As far as I know, Apple is free to choose to offer this or that feature.
They never said that they want to clone Word or even compete with it.
Differences between tables in both worlds are numerous.
In Pages (or Numbers)
- we can't sort a single column
- we can't sort by row
- we can't insert or remove a single cell
- a cell can't cross pages boundaries
If I understand well these design choices match :
++-+-+-+-+-+-+-+-++
Apple Human Interface Guidelines:
Apply the 80 Percent Solution
During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
+-+-+-+-+-+-+-+-+-++
Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Order Query in SQ01 using Table Joins in CRM

Hello Experts,
I am trying to create a query using table joins in SQ01 in CRM because I need a report that will give me all transactions for a selected Business Partner. I am unable to display any results when running my query. I have found other threads which give a list of possible tables to join together, but the fields used in the joins were not described.
The tables I have joined in my query are as follows:
CRMD_ORDERADM_H
CRMD_ORDER_INDEX
CRMD_PARTNER
BUT_000
I have used SE16 to try to search for additional tables to use for linking the Business Partner with a transaction, but I have been unsuccessful.
Would anyone please give advice as how to proceed?
Reward points are available!
Thank you in advance,
David

David
The link with be the GUID.
CRMD_ORDERADM_H = Document Header Table
CRMD_ORDERADM_I = Document Line item Table
CRMD_LINK = Lists various link GUIDs, to
access order Information
The Table CRMD_ORDERADM_H will contain you transactions , once you find the GUID of your sales transaction in the table CRMD_ORDERADM_H.
You then need to check the table CRMD_LINK.
In this table you will then find a number in 11 = sales. This refers to the table CRMD_SALES. There are also links to many other tables ie Shipping, pricing, org etc.
CRMM_BUT_SET0140 - for Sales Group, Sales Office, District
CRMM_BUT_LNK0141 - for Sales Area data
Transaction CRMD_BUS2000115 allows you to see all sales transactions for a BP. CRMD_BUS2000126 shows you activities for selected BP.
Regards
M

Custom Infotype - Using Table control in the screen. IN OM

Hi,
I am having a requriement where in I need to create a custom infotype using table control in the screen. I have to create this in OM and I am using PPCI transaction to create the info type. I am able to create the infotype with fields but not table control. Please let me know if any one of you came across and help me with the process I need to follow.
Thanks in advance.
Venkat.

Hello,
After you create the info type throug PPCi, you can directly go to the Sceen module program created automatically while creating Info type and edit the screen.
activate it after your changes.
Regards,
Srujan.

How can I use table control to enter data

Hi all,
I want to use table control to enter data, instead of using textboxes.
So that the user can enter many data at once and just click the save button at the end of the work, only one click.
How can I use the table control at this context?
Thanks.
Deniz.

Hi deniz,
go through it:
/people/ravishankar.rajan/blog/2007/02/23/an-easier-way-of-displaying-and-editing-data-using-table-control
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/code%2bto%2bhandle%2bmultiple%2brecords%2bin%2bbdc%2btable%2bcontrol
Regards,

How to use Table valued MSSQL function in OBIEE

Hi all,
Can some one help me to understand how to use table valued function in OBIEE? I want to use a table valued function (MSSQL function, with some input parameter), in the physical layer to pull the data?
I know for MSSQL Stored Procedure we can write as
EXEC SP_NAME @Parameter = 'VLUEOF(NQ_SESSION.Variablename)'
but now I have a table valued function in the query window I can get the data as
select * from myfunction(parametervalue)
In physical layer of OBIEE I have tried as
select * from myfunction('VLUEOF(NQ_SESSION.Variablename)'), but I'm getting error as the NQ_SESSION variable doesn't have a value , but actually I have initialized the variable but still Im getting error.
Can some one help me to solve this.
Thanks,
Mithun

Follow this link and try yourself. let me know for issues
Substring instr issue in obiee
Appreciate if you mark
Edited by: Srini VEERAVALLI on Feb 20, 2013 8:13 AM

Sales order creation with bapi in webdynpro using table control

When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items. Pls give me some idea to resolve this issue, here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2' method CREATE_SALES_ORDER .
Declaration for Order Header Node DATA: node_order_header TYPE REF TO if_wd_context_node, elem_order_header TYPE REF TO if_wd_context_element, stru_order_header TYPE if_componentcontroller=>element_order_header . * Declaration for Order Items Node DATA: node_order_items TYPE REF TO if_wd_context_node, elem_order_items TYPE REF TO if_wd_context_element, stru_order_items TYPE if_componentcontroller=>element_order_items . * Declaration for Order Partners Node DATA: node_order_partners TYPE REF TO if_wd_context_node, elem_order_partners TYPE REF TO if_wd_context_element, stru_order_partners TYPE if_componentcontroller=>element_order_partners . node_order_header = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_header ). elem_order_header = node_order_header->get_element( ). elem_order_header->get_static_attributes( IMPORTING static_attributes = stru_order_header ). * via lead selection node_order_items = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_items ). elem_order_items = node_order_items->get_element( ). elem_order_items->get_static_attributes( IMPORTING static_attributes = stru_order_items ). * via lead selection node_order_partners = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_partners ). elem_order_partners = node_order_partners->get_element( ). elem_order_partners->get_static_attributes( IMPORTING static_attributes = stru_order_partners ). DATA: v_sales_doc TYPE bapivbeln-vbeln. DATA: w_order_header_in TYPE bapisdhd1, i_order_header_in TYPE table of bapisdhd1," i_order_partners TYPE TABLE OF bapiparnr, w_order_partners TYPE bapiparnr, i_return TYPE TABLE OF bapiret2, w_return TYPE bapiret2, i_order_items_in TYPE TABLE OF bapisditm, w_order_items_in TYPE bapisditm, i_order_conditions_in TYPE TABLE OF bapicond, w_order_conditions_in TYPE bapicond, w_order_SCHDL type BAPISCHDL, i_order_SCHDL type table of BAPISCHDL. * Order Header Details CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in, i_order_conditions_in, w_order_SCHDL, i_order_SCHDL. refresh : i_order_partners, i_return, i_order_items_in, i_order_conditions_in, i_order_SCHDL. w_order_header_in-doc_type = stru_order_header-doc_type. w_order_header_in-sales_org = stru_order_header-sales_org. w_order_header_in-distr_chan = stru_order_header-distr_chan. w_order_header_in-division = stru_order_header-division. w_order_header_in-req_date_h = stru_order_header-req_date_h. w_order_header_in-sales_dist = stru_order_header-sales_dist. w_order_header_in-purch_no_c = stru_order_header-purch_no_c. * Order Item Details CLEAR: i_order_items_in,w_order_items_in. * w_order_items_in-itm_num = stru_order_items-itm_num. w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER. w_order_items_in-material = stru_order_items-material. w_order_items_in-target_qty = stru_order_items-target_qty."'5'. w_order_items_in-target_qu = stru_order_items-target_qu."'5'. w_order_items_in-plant = stru_order_items-plant. w_order_items_in-target_val = stru_order_items-target_val. w_order_items_in-currency = stru_order_items-currency. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_items_in-material IMPORTING output = w_order_items_in-material. APPEND w_order_items_in TO i_order_items_in. * Order Partner Details CLEAR: i_order_partners,w_order_partners. w_order_partners-partn_role = stru_order_partners-partn_role. w_order_partners-partn_numb = stru_order_partners-partn_numb. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_partners-partn_numb IMPORTING output = w_order_partners-partn_numb. APPEND w_order_partners TO i_order_partners. * Order Condition Details w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'. w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'. APPEND w_order_SCHDL to i_order_SCHDL. * Create Sales Order BAPI Call *loop at i_order_header_in into w_order_header_in. CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = w_order_header_in IMPORTING salesdocument = v_sales_doc TABLES return = i_return order_items_in = i_order_items_in order_partners = i_order_partners order_schedules_in = i_order_SCHDL order_conditions_in = i_order_conditions_in. * Get message manager DATA: l_current_controller TYPE REF TO if_wd_controller, l_message_manager TYPE REF TO if_wd_message_manager. l_current_controller ?= wd_this->wd_get_api( ). CALL METHOD l_current_controller->get_message_manager RECEIVING message_manager = l_message_manager. DATA: v_message_text TYPE string. * When Sales Order is created commit the data IF NOT v_sales_doc IS INITIAL. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. CONCATENATE 'Sales Document' v_sales_doc 'has been created.' INTO v_message_text SEPARATED BY space. * Report Success message CALL METHOD l_message_manager->report_success EXPORTING message_text = v_message_text. ELSE. v_message_text = 'Error Creating Sales Order'. * Report Error message CALL METHOD l_message_manager->report_error_message EXPORTING message_text = v_message_text. ENDIF. *endloop. endmethod. and code for table control i am using is method WDDOINIT . Types : Begin of item_tab, itm_number type bapisditm-itm_number, material type bapisditm-material, plant type bapisditm-plant , target_qty type bapisditm-target_qty, target_qu type bapisditm-target_qu, target_val type bapisditm-target_val, currency type bapisditm-currency, end of item_tab. *Creating internal table and Work Area of the same structure *as that of the Node created. Data : it_item type standard table of item_tab, wa_item type item_tab. *Appending Blank Work Area to Internal table. ***********************************************888 *LOOP AT it_item INTO wa_item. **wa_item-itm_number to bapisditm-itm_number. **wa_item-material to bapisditm-material. **wa_item-plant to bapisditm-plant. **wa_item-target_qty to bapisditm-target_qty. **wa_item-target_qu to bapisditm-target_qu. **wa_item-target_val to bapisditm-target_val. **wa_item-currency to bapisditm-currency. ** * APPEND wa_item TO it_item. *ENDLOOP. **********************************************88 ******** Do 10 times. Append wa_item to it_item. enddo. ********* "Binding the table DATA lo_nd_order_items TYPE REF TO if_wd_context_node. * DATA lt_material TYPE wd_this->Elements_material. * navigate from to via lead selection lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ). * @TODO handle non existant child * IF lo_nd_material IS INITIAL. * ENDIF. ** @TODO compute values ** e.g. call a model function * lo_nd_order_items->bind_table( new_items = it_item set_initial_elements = abap_true ). endmethod.

DATA: node_order_header TYPE REF TO if_wd_context_node, elem_order_header TYPE REF TO if_wd_context_element, stru_order_header TYPE if_componentcontroller=>element_order_header . * Declaration for Order Items Node DATA: node_order_items TYPE REF TO if_wd_context_node, elem_order_items TYPE REF TO if_wd_context_element, stru_order_items TYPE if_componentcontroller=>element_order_items . * Declaration for Order Partners Node DATA: node_order_partners TYPE REF TO if_wd_context_node, elem_order_partners TYPE REF TO if_wd_context_element, stru_order_partners TYPE if_componentcontroller=>element_order_partners . node_order_header = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_header ). elem_order_header = node_order_header->get_element( ). elem_order_header->get_static_attributes( IMPORTING static_attributes = stru_order_header ). * via lead selection node_order_items = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_items ). elem_order_items = node_order_items->get_element( ). elem_order_items->get_static_attributes( IMPORTING static_attributes = stru_order_items ). * via lead selection node_order_partners = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_partners ). elem_order_partners = node_order_partners->get_element( ). elem_order_partners->get_static_attributes( IMPORTING static_attributes = stru_order_partners ). DATA: v_sales_doc TYPE bapivbeln-vbeln. DATA: w_order_header_in TYPE bapisdhd1, i_order_header_in TYPE table of bapisdhd1," i_order_partners TYPE TABLE OF bapiparnr, w_order_partners TYPE bapiparnr, i_return TYPE TABLE OF bapiret2, w_return TYPE bapiret2, i_order_items_in TYPE TABLE OF bapisditm, w_order_items_in TYPE bapisditm, i_order_conditions_in TYPE TABLE OF bapicond, w_order_conditions_in TYPE bapicond, w_order_SCHDL type BAPISCHDL, i_order_SCHDL type table of BAPISCHDL. * Order Header Details CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in, i_order_conditions_in, w_order_SCHDL, i_order_SCHDL. refresh : i_order_partners, i_return, i_order_items_in, i_order_conditions_in, i_order_SCHDL. w_order_header_in-doc_type = stru_order_header-doc_type. w_order_header_in-sales_org = stru_order_header-sales_org. w_order_header_in-distr_chan = stru_order_header-distr_chan. w_order_header_in-division = stru_order_header-division. w_order_header_in-req_date_h = stru_order_header-req_date_h. w_order_header_in-sales_dist = stru_order_header-sales_dist. w_order_header_in-purch_no_c = stru_order_header-purch_no_c. * Order Item Details CLEAR: i_order_items_in,w_order_items_in. * w_order_items_in-itm_num = stru_order_items-itm_num. w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER. w_order_items_in-material = stru_order_items-material. w_order_items_in-target_qty = stru_order_items-target_qty."'5'. w_order_items_in-target_qu = stru_order_items-target_qu."'5'. w_order_items_in-plant = stru_order_items-plant. w_order_items_in-target_val = stru_order_items-target_val. w_order_items_in-currency = stru_order_items-currency. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_items_in-material IMPORTING output = w_order_items_in-material. APPEND w_order_items_in TO i_order_items_in. * Order Partner Details CLEAR: i_order_partners,w_order_partners. w_order_partners-partn_role = stru_order_partners-partn_role. w_order_partners-partn_numb = stru_order_partners-partn_numb. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_partners-partn_numb IMPORTING output = w_order_partners-partn_numb. APPEND w_order_partners TO i_order_partners. * Order Condition Details w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'. w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'. APPEND w_order_SCHDL to i_order_SCHDL. * Create Sales Order BAPI Call *loop at i_order_header_in into w_order_header_in. CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = w_order_header_in IMPORTING salesdocument = v_sales_doc TABLES return = i_return order_items_in = i_order_items_in order_partners = i_order_partners order_schedules_in = i_order_SCHDL order_conditions_in = i_order_conditions_in. * Get message manager DATA: l_current_controller TYPE REF TO if_wd_controller, l_message_manager TYPE REF TO if_wd_message_manager. l_current_controller ?= wd_this->wd_get_api( ). CALL METHOD l_current_controller->get_message_manager RECEIVING message_manager = l_message_manager. DATA: v_message_text TYPE string. * When Sales Order is created commit the data IF NOT v_sales_doc IS INITIAL. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. CONCATENATE 'Sales Document' v_sales_doc 'has been created.' INTO v_message_text SEPARATED BY space. * Report Success message CALL METHOD l_message_manager->report_success EXPORTING message_text = v_message_text. ELSE. v_message_text = 'Error Creating Sales Order'. * Report Error message CALL METHOD l_message_manager->report_error_message EXPORTING message_text = v_message_text. ENDIF. *endloop. endmethod. and code for table control i am using is method WDDOINIT . Types : Begin of item_tab, itm_number type bapisditm-itm_number, material type bapisditm-material, plant type bapisditm-plant , target_qty type bapisditm-target_qty, target_qu type bapisditm-target_qu, target_val type bapisditm-target_val, currency type bapisditm-currency, end of item_tab. *Creating internal table and Work Area of the same structure *as that of the Node created. Data : it_item type standard table of item_tab, wa_item type item_tab. *Appending Blank Work Area to Internal table. ***********************************************888 *LOOP AT it_item INTO wa_item. **wa_item-itm_number to bapisditm-itm_number. **wa_item-material to bapisditm-material. **wa_item-plant to bapisditm-plant. **wa_item-target_qty to bapisditm-target_qty. **wa_item-target_qu to bapisditm-target_qu. **wa_item-target_val to bapisditm-target_val. **wa_item-currency to bapisditm-currency. ** * APPEND wa_item TO it_item. *ENDLOOP. **********************************************88 ******** Do 10 times. Append wa_item to it_item. enddo. ********* "Binding the table DATA lo_nd_order_items TYPE REF TO if_wd_context_node. * DATA lt_material TYPE wd_this->Elements_material. * navigate from to via lead selection lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ). * @TODO handle non existant child * IF lo_nd_material IS INITIAL. * ENDIF. ** @TODO compute values ** e.g. call a model function * lo_nd_order_items->bind_table( new_items = it_item set_initial_elements = abap_true ). endmethod.

How to find the list of un used table names in a schema?

Hi,
I have a doubt in Oracle. The doubt is that If we are using any tables in Function Or Proc.... Then...We can list all those used table names from USER_DEPENDENCIES system table. Right...
But, If the table is used with Execute Immediate Statement, then, those table names are not coming out with USER_DEPENDENCIES system table. Because they are identified at run time and not compile time.
It is fine. And I agree.. But, If I want to list out those tables also...then...How to do? Any idea?
I think ‘USER_SOURCE’ system table may not be the right one. If there is any other system table avails for this purpose...then..it would be very grateful to extract right...
So I am wanting that exact system table.
Please let me know about this, if you have any idea or check with your friends if they have any idea.
Regards,
Subramanian G

Hi Guys,
Thanks for all your answers.
Yes....You are all right. We can list out the used tables upto certain extent. Anyhow, I have done some R&D to derive the SQL's which is given below:
SELECT TABLE_NAME FROM USER_TABLES
MINUS
SELECT DISTINCT UPPER(REFERENCED_NAME)
FROM user_dependencies
where
referenced_type='TABLE' and UPPER(NAME) in
select distinct UPPER(object_name) from user_objects where UPPER(object_type) in
'MATERIALIZED VIEW',
'PACKAGE',
'PACKAGE BODY',
'PROCEDURE',
'TRIGGER',
'VIEW',
'FUNCTION'
UNION
SELECT UT.TABLE_NAME FROM
SELECT TABLE_NAME FROM USER_TABLES
MINUS
SELECT DISTINCT UPPER(REFERENCED_NAME)
FROM user_dependencies
where
referenced_type='TABLE' and UPPER(NAME) in
select distinct UPPER(object_name) from user_objects where UPPER(object_type) in
'MATERIALIZED VIEW',
'PACKAGE',
'PACKAGE BODY',
'PROCEDURE',
'TRIGGER',
'VIEW',
'FUNCTION'
AND REFERENCED_OWNER=(SELECT sys_context('USERENV', 'CURRENT_SCHEMA') FROM dual)
) UT,
( SELECT * FROM USER_SOURCE
WHERE NAME IN
( SELECT DISTINCT NAME FROM USER_SOURCE
WHERE TYPE NOT IN ('TYPE')
AND
UPPER(TEXT) LIKE '%EXECUTE IMMEDIATE%'
) US
WHERE
UPPER(US.TEXT) LIKE '%'||UPPER(UT.TABLE_NAME)||'%'
AND
(UPPER(US.TEXT) NOT LIKE '%--%')
The above SQL Query can list out unused tables by checking the Dynamic SQL Statement also upto some level only.
Once we extracted the list of unused tables, having a manual check would be also greater to verify as it is should not impact the business applications.
Regards,
Subramanian G

Creation of sale order using bapi in webdynpro using table control

only first row is getting updated when checked in va03, the line items are not getting replaced, only first row is committed..
Here is the code for table control i used...
http://www.scribd.com/doc/51879492/creation-of-sale-order-using-bapi-in-webdynpro-using-table-control
pls help me out with this..

Duplicate Posting. Original is here: Sales order creation with bapi in webdynpro using table control

Sproxy configuration using table SPROXSET

Similar Messages

Maybe you are looking for