SPROXY - maximum number of endpoints reached

Hi,
in transaction SPROXY i have generated some server proxies.
One proxy i have deleted and new generated. Now the error message is "maxmimum number of endpoints reached".
The proxy can't be activated...
Where i can configure or delete the endpoints?
Thanks and best regards

We had a very similar issue last week. For us we had a couple of sessions that were stuck that didn't end properly even after a restart (probably because we have a HA cluster).
We have 35 seat licenses activated but only 33 agents could log in. Ended up raising a TAC case and doing the following -
1) From the command line run show uccx cad license usage to list the current license status - a list of IPs that are currently claiming a license.
2) Run the same command when the contact center is closed and see who is still claiming a license. Here I traced the computers down and made sure the Agent or Supervisor application was closed (forcibly if necessary).
3) Restart the Cisco Desktop License and Resource Manager Service on all nodes in the HA cluster to clear any stuck sessions.
Remember though that anyone logged into the Supervisor application also uses a seat license!

Similar Messages

Message no. F5727:maximum number of items reached in FI sereen MI07

hi sap techies
Message no. F5727:maximum number of items reached in FI in screen MI07
when i try to post inventory difference in MI07(Physical difference posting) i give the difference amount and reason for movement and i try to save it.it gives me the error maximum number of items in FI reached please help
kind regards
sap fico
arman
Edited by: akausar on Oct 10, 2011 3:23 PM

Dear Akausar,
The error F5 727 is an error from the FI component side. This is
because FI cannot accept a posting document with more than 999 line
items.
There is a limit of (999) line items which can be posted per FI
document. This is because the line item number (BSEG-BUZEI) field
length is defined as (3) numeric positions, i.e., (999) line items.
The fact that an MM document contains X positions, doesn't
mean that the FI document will contain the same number. This is the
reason why in some occasions the error message is triggered when posting
an invoice in MM.
Please bear in mind the 'rule of the thumb' for this kind of scenarios
in which you have a large MM-Document: consider an average of 4 line
items created for each line: this is due to discounts, tax postings,etc.
Unfortunately, there are no immediate plans to expand the number of
line items beyond the current limit of (999) lines per document.
SAP's Development group is aware of this functionality change request;
however, the change is massive because BSEG is a cluster table which
is used in numerous R/3 programs. The most commonly used workarounds
are as follows:
1) Implement FI summarization (per note 36353).
2) Cancel the original billing document and split it into smaller
documents using different payment terms but actually with the
same terms.
This will avoid the (999) line item limit for FI postings.
br, Guido

SRM 5.00 web Maximum number of sessions reached

hello
it seems a problem very simple anyway i don't know how to resolve it.
the error "Maximum number of sessions reached" occurs in the ITS of SRM 5.00 using the web.
It happens on all transactionsn anyway it works properly in abap gui but not in webgui.
If I go in all transactions and i try to open another mode the popup appears with the error descrpted.
the session with that user are very few ...anyway the number of sessions is smaller than the parameter limit set in rdisp/max_alt_modes
Do you have any idea?
thanks
Nick

Hello Nick,
Nicola Blasi wrote:
If I go in all transactions and i try to open another mode the popup appears with the error descrpted.
I do not understand what you mean by "all transactions" and "open another mode". Where do you open it? You can not open another mode from the SAP GUI for HTML (Webgui) itself, since this is not supported. You will need to start a new session.
Best regards,
TJ

LSO Booking Error - Maximum number of Participants reached;

Hi Experts,
Our Client is implementing LSO. We had installed Enhancement Pack 4 into the development system.
We are currently facing a Problem relating to the LSO.
When I am trying to book a participant on to the Course (E) via LSO_PSV1 or LSO_PV00, I am getting the following warning but able to book the person on to the Course.
Warning:Maximum number of Participants reached; proceed with waiting list.
But if I try to do the booking using PSV1 (which is TEM transaction) i am able to book the particpant on to the Course I am not getting any warning and the particpant was booked successfully.
I had assigned a Location to the Course Type (D) related to the Course (E) with Minimum Capacity (10), Optimum Capacity (15) and Maximum Capacity (20).
Also to the Course I had provided the same capacity that is there for the Location.
Because of the warning above we are not able to book any Courses from the Portal.
Did anybody face this kind of issue before?
Please provide your expertise on this.

Hi,
No. We had not assigned the Capacity anywhere other than at the Course Type and Course Level.
I tried one Scenario.
I removed my employee assigned and tried to book on the Course as a User (US). I am able to book without any warning message.
Please let me know if there is any Config that we would have missed.
Thanks and Regards,
Nagendra

BDC error :Maximum number of sessions reached

Hi!
I have created a BDC program which outputs the available Orders / delivberies for a particular plant with checakboxes to select each lines or multiple selection. On selecting one opr more line from output and clicking a GENERATE button on the output screen the bdc calls in VF01 transaction and subsequently the billing documenst are automatically generated and sent to the printer directly.
The problem: The problem happend when more than 6 documents are selected or if the selected no. of items are more than the screens opened in any enviornment where we are running , it gives an error message that "maximum number of sessiosn reached" . This creates aproblem is knowing which documenst or how many invoices have already printed and which ones did not.
I was wondering if there is nay other way of stopping this problem of miximum number sessions recahed. I mean if there is anyway we can eliminate each processesed session so that it does not have to create so many screens even if more documents are selected.
Thanks

I have the sales document number that I am using to create the billing document. I am not prety sure where to use it. I ahve set the parameter ID AUN alread6.
refresh: bdc_tab.
perform update_bdc using: 'X' 'SAPMV60A'    '0102',
                            ' ' 'BDC_CURSOR' 'RV60A-FKART',
                            ' ' 'RV60A-FKART' lc_fkart,
                            ' ' 'BDC_OKCODE' '/00'.
loop at it_vbeln into wa_vbeln.
    ln_index = sy-tabix.
*   Up to the second delivery of the BDC add the Delivery to the screen,
*   after that click the More Documents for every entry. logic changed for DEVK902353
*   changed again in added for every line DEVK910604
    case ln_index.
      when 1.
        concatenate 'KOMFK-VBELN' '(' ln_index ')' into lc_field.
        if li_lines = 1.
          perform update_bdc using: ' ' lc_field wa_vbeln.
        else.
          perform update_bdc using: ' ' lc_field wa_vbeln,
                                    ' ' 'BDC_OKCODE' 'FKAN'.
        endif.
      when others.
        if p_rdos = 'X'.
          concatenate 'KOMFK-VBELN' '(2)' into lc_field.
          perform update_bdc using: ' ' lc_field wa_vbeln,
                                    'X' 'SAPMV60A'   '0102',
                                    ' ' 'RV60A-FKDAT' lc_date,
                                    ' ' 'BDC_OKCODE' 'FKAN'.
        else.
          concatenate 'KOMFK-VBELN' '(2)' into lc_field.
          perform update_bdc using: ' ' lc_field wa_vbeln,
                                    'X' 'SAPMV60A'   '0102',
                                    ' ' 'BDC_OKCODE' 'FKAN'.
        endif.
    endcase.
endloop.
* VF01 will go to a different screen if only one line selected
if li_lines eq 1.
    perform update_bdc using: 'X' 'SAPMV60A' '0104',
                              ' ' 'BDC_OKCODE' '=SICH'.
else.
    perform update_bdc using: 'X' 'SAPMV60A' '0102',
                              ' ' 'BDC_OKCODE' '=SICH'.
endif.
{color:green}call transaction 'VF01' using bdc_tab options from lwa_bdcoptions
                           messages into it_bdcmess .{color}
write: / 'BDC Messages:'.
skip.

Maximum number of clients reached

Hi all,
I have Arch running on my laptop since a year, recently i started to have a very annoying problem, with few just few X client sometimes i can't open any X program, for example mousepad from the terminal will show:
Maximum number of clients reached
(mousepad:21270): Gtk-WARNING **: cannot open display: :0.0
while
xlsclients | wc -l
shows 24 clients? the maximum should be 255!
The only one thing that might be related which i did recently was to install compiz and enabling desktop effects, but i removed them completely including the user configuration files that are left, after that i started to see the problem occasionally.
Any hint?

Any updates on this?
After a recent update, when I tried to launch chromium (or google-chrome) via terminal I got a parse error for the file "/usr/share/hwdata/pci.ids"
After I re-installed some related programs
pacman -S usbutils pciutils hwids
I was able to run chromium again, but now I get this max clients error.
Here is the output of xlsclients
$ xlsclients
Maximum number of clients reachedxlsclients: unable to open display ":0.0"
How can I go about debugging this?
EDIT: The bug is with VLC. When VLC is closed, everything works as expected.
Last edited by beardedlinuxgeek (2013-02-19 13:35:29)

Maximum number of nodes reached

Hello all,
I am currently trying to explain a problem with one of our WF run and I just found out, under the "Step History" tab of a Work Item, the error message "Maximum number of nodes reached" was logged. That certainly explains the problem but I have some questions regarding such a message:
1) If WF-A calls a subworkflow WF-B, does this limit of 10,000 nodes apllies for the whole WF run (i.e. WF-A nodes + WF-B nodes) or is it 10,000 nodes for WF-A and 10,000 nodes for WF-B?
2) In our situation, the error was logged within the WF-B (subworkflow) work item which I beleive caused WF-A to fall into an error status. Some people have tried to re-execute the WF-B workitem without any success... Always the same error was reported. Is there anyway to re-start a WF that is in Error if it has reached this limit of nodes?
Thanks.
José

Hello Rick,
You are right, this worfwlow run was started back in May 2010 and yes, it is for the creation of a new point of sale. I understand when you say that obviously, the business managed to survive and we should cancel and restart and this is exactly what we are investigating at the moment but this customer wanted us to try to restart it considering, I suppose, the amount of work already completed in this workflow (which contains many subworkflows that are also in progress and stopped because of this problem).
To your question "How come this error didn't affect other wokflow instances?", I would say that the customer have been lucky so far because there was a design issue in this workflow definition but the "context" required to create this error happened only once since its implementation. However, they are still at risk and this WF definition requires a modification for sure to prevent this from happening again in the futur.
Concerning this 10,000 value, I've asked myself the same question since the change in the customizing made no differences, it has to be kept somewhere inside the workflow instance but where?. I have chekced all the elements of the WF container but, not there!
I will investigate with SWI2_DIAG, thanks for the hint and I will let you know through this thread.
Merci ! (Thanks)
José

Maximum Number of sessions reached!!

Hi, when I am trying to release 8-10 production orders in a single transaction and it is giving an error message below of the screen saying 'Maximum Number of sessions reached'. I have only two external sessions open at single point of time.
Please help me how resolve this error message. Thanks.

Hi Sagar Sahoo ,
Check the below thread :
http://sapfans.com/forums/viewtopic.php?t=206077
You better need to use the Update task function module instead of submit and return.
Thanks,
Greetson

Maximum number of licenses reached error message on CCX agent's desktop

Intermittently CAD agents or supervisor are getting the error message "Maximum number of licenses reached". I have checked at the same time of error, still there are license available but users are getting this error message. Currently we have 50 seats licenses.I have noticed this problem reoccur when it's reaching the login agents between 40-50 agents. Is there any threshold value, we can modify to get rid of this error message.

We had a very similar issue last week. For us we had a couple of sessions that were stuck that didn't end properly even after a restart (probably because we have a HA cluster).
We have 35 seat licenses activated but only 33 agents could log in. Ended up raising a TAC case and doing the following -
1) From the command line run show uccx cad license usage to list the current license status - a list of IPs that are currently claiming a license.
2) Run the same command when the contact center is closed and see who is still claiming a license. Here I traced the computers down and made sure the Agent or Supervisor application was closed (forcibly if necessary).
3) Restart the Cisco Desktop License and Resource Manager Service on all nodes in the HA cluster to clear any stuck sessions.
Remember though that anyone logged into the Supervisor application also uses a seat license!

Maximum number of endpoint registrations

What is the maximum number of video endpoints that can register to a Gatekeeper running on a 7204VXR running IOS 12.2.19?

The numbers from the following page,which show 3000 H.323 Endpoint Registration, should still be valid for the IOS you are running....
http://www.cisco.com/en/US/products/sw/voicesw/ps4139/products_data_sheet09186a0080107f7b.html

Maximum number of files reached

I keep getting a message on my phone that you've reached maximum number of files. Please remove applications and/or files to clear space. When I hit button for help it says to got to www.vzw.com/baplus to find: -FAQs/help -manage contacts -contact support. When I go into my verizon and my device (with my phone number) I get a backup assistance list of another phone on my plan. It shows their number in the upper left corner on the back up assistance. I cannot get to my backup assistance numbers to manage.

Thanks for trying to get to your information already, BrutusgoBucks. Please make sure that when you're visiting www.vzw.com/baplus, log into My Verizon as your mobile number. Going to My Verizon and logging in with the account number will result in seeing the main number registered to that user name instead of your information, even if you select your number later in the page. If you've never created a My Verizon account for your line, no worries! It's easy. Just select register instead of sign in and create an account for your specific line. That way you'll be able to view your line's content on Backup Assistant Plus and the media center.
Thank you
JenniferH_VZW
Please follow us on Twitter @vzwsupport

Maximum Number of Fields Reached

I read on one of the forums that there is no hard number to maximum number of fields. However, I received this message: "You have reached the limit on the number of items allowed in a FormsCentral form. You may delete or modify existing items."
Why is this?
I have subscribed to Basic pack.
Thanks.

Thanks Josh,
Splitting forms does not help my cause. It is a governement form which requires a lot of information in it. If the information can not be filled in one form, I am affraid that this product is not suitable for our organisation. Is there a way that I can seek a refund?
Thanks.

Error 'Maximum number of sessions reached' while posting an idoc

Hi,
i got one requirement that when ever user enters so many materials with different quantities and version id's and when he executes,it has to post the idocs using FM .but if the number of records increases,iam getting error that 'maximum number of internal sessions exceeded' how can i avoid this for successfful posting.To avoid this i called the FM in background .If i call the FM in background it is not at all posting even one idoc also.Can anybody please help on this .
Thanks & Regards
Roopa

Hi,
i got one requirement that when ever user enters so many materials with different quantities and version id's and when he executes,it has to post the idocs using FM .but if the number of records increases,iam getting error that 'maximum number of internal sessions exceeded' how can i avoid this for successfful posting.To avoid this i called the FM in background .If i call the FM in background it is not at all posting even one idoc also.Can anybody please help on this .
Thanks & Regards
Roopa

Maximum number of authorisations reached, but why?

I have only one machine running Vista but every time I upgrade iTunes (like today when I upgraded to 7.3) it complains that this machine is not authorised to play the tunes. So I dutifully authorise again only to be greeted this time by the message that I have exceeded the maximum number of 5.
Why is this happening?
How do I fix the situation?
And loving it,
-Q
[email protected]
(Replace the "SixFour" with numbers to email me)

I am having a similar problem. See my posted thread.---Did Bill Gates buy apple?

Maximum number of rows reached in a query result........

Hi,
I have created one query , When I am executing it , it is displaying the message "Maximum number of rows exceeded" .
Is there any option in query design through which I can display all the data?
Thanks,
Jeetu

Hi Jeetu ,
such a big report which even exceeds the excel limit will be of relatively no use to the user .
you should restirct the outpur using some criteria so that it is a managable report.
Thanks.

SPROXY - maximum number of endpoints reached

Similar Messages

Maybe you are looking for