SPROXY not recognizing new Service Interfaces

Hi all,
We are currently on SAP_BASIS 7.0 connecting to XI 3.0 on SP18. I have created a new inbound asynchronous message interface within XI and want to create a server proxy on the SAP side to consume the message from XI. When I execute the SPROXY transaction to import the XI message interface, it is not displayed under the service interface and not allowing me to generate this. Existing proxies exist under other service interfaces created since the upgrade but it doesn't seem to recognize that I created a new message interface in XI. Would this be a compatibility issue with SAP_BASIS 7.0/ECC6 to XI 3.0 SP18 or would do I need to refresh something? Any help would be appreciated.
Thanks,
Nate
Edited by: Nathan Jabs on Sep 17, 2008 6:43 PM
Edited by: Nathan Jabs on Sep 17, 2008 6:44 PM

1.Recreate the name space with other name else than sap.com
2. check whether ur namespace is displayed in light Grey Color
then there may be connection to SAP XI issue.
yes if it is in Light gray colour, you will get a status message as "NO CONNECTION TO INTEGRATION BUILDER (ONLY GENERIC DATA VISIBLE)
check whether the proxy objects are created under seperate package
check this help link
http://help.sap.com/saphelp_nw04/helpdata/en/2b/f49b21674e8c44940bb3beafd83d5c/content.htm

Similar Messages

5530 music player not recognizing new songs

hi all,
new problem for me. the nokia music player is not recognizing new music. it just files them under unknown. the files are properly tagged. the only way to get it to recognize the files is to format the sd card and put the music back on the card.
also after deleting music, the player still has the files in its unknown folder, even after updating the music library.
very frustrating as i use the phone everyday as my main music player. this problem has only turned up in the past couple of weeks, with me changing nothing else on the phone.
any advise?
Solved!
Go to Solution.

Hi, just try up this found somewhere-
You can do this to rebuild the library as it is corrupted.
Restart your device and then refresh your library. If this doesn't help then;
Connect the phone to your pc/lappy and put in 'Data transfer' mode.
To delete the library files:
- Ensure you can see hidden files in Windows Explorer:
Windows Explorer .. Tools .. Folder Options .. View
Select "Show hidden files and folders"
- Connect the phone to your PC using the USB cable in "Data transfer" mode
- Find and rename (or delete if you're really brave) files with names like:
E:\private\101FFC31\mpxv1.mpd
E:\private\101FFC31\pcv5.mpd
E:\private\101ffca9\harvesterdb.dat
(assuming the phone's mass memory / card has been connected as E)
Note that the folder names may be different and the files may have prefixes - eg: mpxv1.mpd could be called abcmpxv1.mpd. Basically, you need to search under the Private folder for any files that look similar.
Now just refresh the Music Player library and the job is done.
This will take longer than normal as it's a complete refresh, but it should now work.
Please thank me by giving 'KUDOS' star. It will help me to serve you better.
Currently using N82 and 5230. Next would be N?

I downloaded carbon copy. transferred entire internal hd to new replacement HD thru USB. computer booted from replacement hrdrive. then installed replacement hard rive into iMac. when rebooting imac did not recognized new replacement hd.

i downloaded carbon copy. transferred entire internal hd to new replacement HD thru USB adapter kit. computer booted from replacement hrdrive. then i erased the internal hardrive and reloaded the operating system.( i needed to find out if the hard drive was bad or virus/worm was the cause). then installed replacement hard drive into iMac. when rebooting, imac did not recognized new replacement hd. i also upgraded memory at the same time. ok what did i do wrong. do i have to remove the new replacement hardrive to extract the data.

It should not matter. CCC will "clone" the recovery partition as well, but not knowing exactly what operation you had CCC perform it is difficult to know what may have gone wrong - it has many customizable options and you have to choose the correct one.
I have performed the same transplant as you described and didn't have a problem, but if your Mac is not recognizing the internal HD you really have no choice other than to reinitialize it as suggested. After that, install OS X, upgrade to Mountain Lion if required, and migrate your old account(s) from your backup.
my backups have backups.
I assume you didn't mean that literally. Have redundant backups - don't "back up your backups".

ITunes not recognizing new PC and, therefore, doesn't recognize my IPOD

ITunes not recognizing new PC even though it says it is authorized. The result: ITunes doesn't recognize my IPOD. It does still have my old PC name attached to my account. What can I do to rectify this situation?

It could be a tiny bit of fluff in the dock that's preventing a particular wire from connecting. A magnifying glass and a decent light should let you inspect the port. If there is any rubbish lodged in the dock opening use a can of compressed air or a fine needle to ease it out taking care not to damage the connectors.
tt2

Drive not recognized - new issue...help please

I am replacing a 120 GB drive with a 250 GB one to give more space for video files. On reboot, I get the message: You have inserted a drive not recognized...etc...with the choices to initialize, ignore or eject.
Then I notice that the drive on the same bus (in the bottom of the tray) is not seen on the desktop. It was in two volume partitions and was also a 250GB. Big mystery. So I remove the new one and connect just the older drive. No luck, message says ...a drive not recognized...etc. So then I change the jumpers twice - same results - and I remove the jumper...same thing. I see this drive in Disk Utility represented by a number and size (232 GB) but not by the volume names. And when I try to verify or repair, the option is greyed out (yes, I booted to the install disc and went to Disk Utility, as per instructions.
This disk has data on it I need, and it's not backed up. All I did was unplug the connectors and then replaced them as before. So please, tell me how I can restore this one. I could remove it and put it in an external FW enclosure and then see if it shows up, but I don't want to take chances. Worse case scenario is a data retrieval service - and I'm almost certain I shouldn't have to do that as this is a healthy drive.
Any suggestions very gratefully appreciated, thanks!
Keith

Tom, I tried every one of your suggestions: set the older drive (Seagate) at P4 and first connector on IDE ribbon to cable select and the new drive (Hitachi) in tray just above it at P5 - end connector on ribbon also to cable select. Result: two dialog boxes for both drive on reboot "You have inserted a device not recognized..."
Then I tried slave on the Seagate and Master on the Hitachi...same result as above.
Then I tried alternate Master and Cable Select configs. on the Hitachi for 15 or 16 pin..whatever that is...but was printed on strip on drive. No go.
I think it must be another issue here than jumpers...although that may have something to do with it. When I installed a new drive in my Quicksilver I never got the Device Not Recognized dialog...it either saw the drive with all data on it or it didn't, until I set the jumpers correctly, as directed for that incident.
What bothers me is that when I removed the new Hitachi entirely and reconnected the old Seagate as the only drive on that cable, either with jumper set to CS or M or S I am still getting the dialog.
Any other solutions, please.
K.

Mail not recognizing new certificate, recognizing old expired certificate.

Recently the Thawte certificate for the SSL mail server at work expired and Mail could no longer connect to our mail server. No one else in the office uses a Mac and no one else seemed to be affected. IT claimed all their certs were up to date. I contacted the fine folks at Thawte and they hooked me up with the new cert. I've added that to my X509Anchors keychain, along with the root cert from Thawte to be sure, and Mail is not recognizing it. In fact, the old expired cert is in my login keychain, so I delete it, but every time Mail attempts to connect to the mail server, the old expired cert reappears in my login keychain and it gives me the same "expired cert" error message. Temporary workaround has been to change my system date/time so it is within the valid dates of the old expired cert, but that renders my calendar useless, and other problems. What is going on? Any ideas? How can I get Mail to use the new valid cert?

Anna,
I am having the same issue. I am on a new laptop without my cert, so I downloaded it again from thawte but it only installs the public key, not the private key.

Mail not recognizing new password

All right so I recently had to change the password on one of my Yahoo.com mail accounts because I could not remember the last one. I have this one linked up the mail application on my computer, however it is not recognizing the new password (yes, I'm typing it in correctly, in fact I'm just copy + pasting it). I also checked keychain and it didn't find any problems apparently when I ran first aid.
How do I get my computer to recognize my new password? This is ridiculous.

Unfortunately it is not recognizing the password still. It recognizes the copy + pasted password on yahoo.com, but when I use the copy + pasted password with apple mail (even after deleting it) it doesn't recognize it.
It was giving me a message that it couldn't connect when I put in the password. However I figured it out. What I had to do was copy the password from what I had, put it into the login area for yahoo.com, have firefox remember the password, then copy that password from firefox's preferences and paste that into the apple password part.
Weird thing is though is when I looked at the two (the one I had kept typed and the copied one from the saved yahoo) they were exactly the same, so I don't know why it wasn't recognizing it.
Thank you for replying to my question though!

Computer not recognizing new ipod nano.

My computer will not recognize my new ipod nano. It is a replacement for one that was broken.

Have you worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Device not recognized (NEW KIND OF PB) (Video Blaster Webcam 5)

Hello
I have a Dell Optiplex GX0, Pentium-3 730MHz, 384 SDRam, 2 USB ports, Win XP pro SP2. All are fully operational. Newest Creative Webcam driver (2002 for xp, something like that)
My webcam 5 was ok until this morning
the day before yesterday: ok
yesterday : ok ----------- and then I installed Active Webcam 7.6 (webcam CCTV software)?I configure, etc. It works.
this morning: ok ---I change some configs :gain / frequence Hz / via the Creative config sofware, it's ok?----------then I use Active Webcam 7.6 : I change the frame rate configuration of this programm (5 +"apply", then 20 +"apply", then 5 +"apply" , 0 +"apply" ) It's okay agin?
In the end I decide to set?5 frames/second, AND THEN......BUG!!!!!!!!!!!Active Webcam 7.6?totally freezes so I kill the process via ctrl+alt+suppr
Even the Creative config sofware freezes when I want starting it. well, I kill it too.
I reboot, AND THEN.......crap.... I see the usb icon on the tray of the task bar?saying "DEVICE NOT RECOGNIZED" ......and the device manager of the system panel does not show my webcam 5 any longer.
........well nothing very annoying, I thought, it is worth rebooting, re-install creative software/driver with new/old versions, seeing some topics on forums etc...
NOTHING, I re-intall, plug-unplug before or after (re)installation, verify USB status via the device manager (it says ok, except for the "not recognized device" http://forums.creative.com/i/smilies...miley-wink.gif and via the BIOS (already switch on).
Can you help me please?Thank you for your advice !
Message Edited by testimonio on 11-26-2006 03:39 PM

Mmmmmmmmhmmmmmmmm?After many many attempt of pluggin/unpluggin, I achieve to detect and keep my webcam detected. It is working a little bit...... I mean everything is ok, but when I attempt to reach the "source" option of Creative Webcam Control, this programm freezes and the webcam LED becomes switched on for an unlimited period. The only way escape it is to plug/unplug again several time. I HAVE AN ANSWERABLE QUESTION NOW?: :smileyvery-happy:--How can I reset my "source" and other options of Creative Webcam Control in order to get the original automatic producer settings ? --Moreover, I fear the register still definitely keep a trace of my old/bugging settings (that's why I get problems even though I re-install). How can I erase Creative Webcam 5 settings and Creative Webcam Control settings in the register, before properly re-installing my new drivers+programs ? Ps : should I keep the old driver, or take the xp whql driver ? (the new driver might be a source of problem ?)
Message Edited by testimonio on 11-27-2006 02:23 AM

MacBook Pro not recognizing new printers

My MacBook Pro is not recognizing my new wireless Epson printer. When I click "Add printer," no printers show in the list to add. I have tried connecting it with the ethernet cord as well, but it still doesn't show up. My dad's computer added the printer just fine, which is also a Mac. My computer also isn't recognizing my husband's printer or my dad's printer at his house. When I first bought the computer a few years ago (maybe 2 years??), I connected my current printer just fine and it still works. However, I need a new printer, and now it doesn't seem to recognize any other printer besides the old one I have always had. I have tried updating my computer, but it says that it is up to date. Help!

Lindsay518,
what said that it couldn’t be opened? Is the file completely downloaded? (If so, it should be 1,190,445,549 bytes long; you can Get Info on the file to confirm its length.)
Note that EPSON also has drivers available for your combination of printer and operating system version on their Web site. More importantly, they also have a firmware update available for the WF-2540.

PRO8600 Not recognizing new ink cartridge

I just changed the cyan cartridge in my Pro8600 printer, as I have previously done with no problem. However, the printer is not recognizing that the new cartridge has been installed. After closing the door and allowing the machine to cycle through its initial process, the window again appears stating that the cyan ink is empty and must be replaced to continue printing. I've removed the cartridge and reinserted it several times to no avail. I've also tried a second new cartridge, again with same results. Any ideas?

Hello bryantk37127,
Welcome to the HP Forums.
I see that you are having an issue with the ink cartridges not being recognized in the printer.
I do have a few suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with this issue as well as other errors. Please click on the following link for when An 'Ink Cartridge Failure,' 'Incompatible Ink Cartridges,' or 'Ink Cartridge Problem' Error Message ....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Printer not recognizing new cartridges installed

I have a Deskjet 1050 all in one J410 series. Just installed 2 new print cartridges. Printer is not recognizing the cartridges. Cartridge light keeps blinking.

I suggest try reinstall the cartridges following the directions in this page: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02835867, there is a video too. If still getting the error, the cartridges maybe defective and probably get a replacement.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

HT1338 i cloud not recognizing new password.

I just updated to Lion OS x 10.8.2. I reset my Apple ID password. iTunes recognizes it but iCloud does not. I have retried. No success.

Unfortunately it is not recognizing the password still. It recognizes the copy + pasted password on yahoo.com, but when I use the copy + pasted password with apple mail (even after deleting it) it doesn't recognize it.
It was giving me a message that it couldn't connect when I put in the password. However I figured it out. What I had to do was copy the password from what I had, put it into the login area for yahoo.com, have firefox remember the password, then copy that password from firefox's preferences and paste that into the apple password part.
Weird thing is though is when I looked at the two (the one I had kept typed and the copied one from the saved yahoo) they were exactly the same, so I don't know why it wasn't recognizing it.
Thank you for replying to my question though!

CD drive not recognizing new CDs

Hi, my Toshiba Qosmio X500 is not recognizing any CDs. I put a CD in and nothing happens, I go into my computer and there is nothing there, please help, what should I do.

Same problem here but I think mine was broken by the guys at the Genius Bar. My hard drive went out about a year and half ago and was replaced. After that my CD drive was scratching CD's. I didn't want to give up my computer again so I procrastinated and took it in about 4 months later and they said a bar had been bent and they had bent it back for me. They tried to tell me it was my fault. The tech guy put in a CD and it took a long while to read but then it showed up. That was the last time it worked. Of course when I got home to upload the music CD's I had purchased since then it wasn't working. I was so disgusted that I haven't gone back. Whenever I put a CD in the drive spins very loudly for about 20 seconds and then spits out the CD. And usually scratches it too. The work around I have been doing is putting CD's into my husband's desktop and then he shares that disk drive over our network so I can transfer files onto my computer. Would love to know if anyone has found out if Apple is fixing this problem (since it sounds like a defective piece of hardware) if the computer is still under Apple Care warranty. Thanks!

Tecra P4 not recognizing new HDD

Hi All,
I have a Tecra P4 - PTS40A-02100V which will not recognise the new Hitachi 80GB disk (HTS541080G9SA00). The laptop is out of warranty and replacement disk was purchased. This is the second new disk the supplier has sent me. The supplier is an official Toshiba supplier in Australia. Customer has paid ~$400AUD for the disk, so this could be an expensive exercise.
I am able to get a vanilla Toshiba Restore to work on the PC, however our organisation uses a WinPE based PXE boot environment to kick off image and build of Windows XP. Using a generic Windows XP in our environment is not possible.
Diskpart in WinPE will not recognise the disk. Partition Magic and other popular apps will recognise the disk, others won't. I can create an NTFS partition and format. Can create basic MBR and MFT, no luck recognising. Also I can use the disk in a USB caddy in Windows XP on another PC fine.
This new disk will display the same issues in another known working P4. I see no options in BIOS to get around the issue. I have updated the BIOS to v3.20, however the result is the same.
Any clues?

In my opinion there is no problem with new HDD and it is recognized properly in Tecras BIOS, right?
Your only problem is OS installation using WinPE based PXE boot environment.
For me it is not Toshiba related issue and you should clarify this with local administrator in your company. As far as I know Toshiba dont offer some additional software that can help you. Not for end-user like you and me.
Ive heard that such software was offered for several companies in the past who have bought several hundred notebooks for their employers. What you can try is to contact Toshiba service provider in your country and ask for help. They have good connections to Toshiba directly and they can ask if such software can be obtained for you.

SPROXY not recognizing new Service Interfaces

Similar Messages

Maybe you are looking for