Sproxy
Hi Everyone,
I started practicing IDoc Scenario.I executed t-code sproxy in R/3 system.After executed message was "No Connection to Integration Builder(Only Generic data is visible)".how to solve this?thanks in advance
Regards
VinayPI
Hi Vinay,
Do exactly as below and it will resolve your issue 100%.
Maintain the RFC destination SAP_PROXY_ESR. If this RFC destination is maintained it will be used by the proxy generation in place of data from the exchange profile to access the Service Repository.
The RFC destination should look like this:
RFC Destination: SAP_PROXY_ESR
Connection Type: G (HTTP connection to external server)
Description 1: ESR for proxy generation
Target host: IP Address of PI system
Service number: port for ex: 50100
Path prefix: /rep
Logon and Security:
Standard authentication: active
User: esr_user or use piappluser
Password: esr_password or use password for piappluser - get from Basis if you dont have
Cheers!
Souvik
Similar Messages
-
Some Software Component Versions do not show up in transaction sproxy
I have a landscape with a CRM system, a PI system (with the SLD on it) and some other systems.
In transaction sproxy in the CRM system the Software Component Version SAP CRM ABAP 7.0 shows up, but others that should be there like SAP ABA 7.01 are not there.
So I went on the SLD and edited the technical system for the CRM system, I added the product SAP CRM 7.00 and set the checkmark for installed for the relevant SWCVs like SAP ABA 7.01.
I then went to the business system for the relevant CRM client and there also checked those SWCVs.
But still they do not show up in transaction sproxy in the CRM system.
What am I missing?Hi Monika,
There's several suggestions that you could look at to help resolve your problem in this thread:
[Can't find ESA ECC-SE 603 SWCV;
Regards, Trevor -
** SPROXY is not working properly in Business System
Friend
My SAP Business System is having Ver 7.00. This system is already connected with our XI server. I face 2 problem when execute SPROXY tcode in this system.
1) System asks username & password for every click.
2) Whatever I have created SWCVs in IR, only SWCV names are displayed there are no objects under that.
I troubleshooted the following things.
I have run the following reports.
1) SPROX_CHECK_HTTP_COMMUNICATION - HTTP Communication is working fine.
2)SPROX_CHECK_IFR_RESPONSE - We get the response.
3)SPROX_CHECK_IFR_CONNECTION - Integration Builder connection is working properly and Data understood.
When I run the 4th report, SPROX_CHECK_IFR_ADDRESS, the data in the SPROXSET table is not shown.
Actually when I checked the data in the SPROXSET table, there is no data in that table.
Friends, how do enter data in SPROXSET table ? How to bring all the objects in SPROX under SWCVs.
Could you kindly help me to solve the above 2 issues ?
Thanks in advance.
Kind Regards,
Jegathees P.Actually
when you run the SPROXY it does 2 things
1. can take the rep information from the table
2. can take the rep info from the exchange profile in the SLD
if you want the sproxy to take the data from the exchange profile do the following:
RFC Dest: should work fine.
LCRSAPAPI
SAPSLDAPI
SLDAPICUST should work fine?
Also in RZ70 TC you should point to the SLD.
This 2 RFC are Registered Programs, if this RFC is working then your Application system can ping to the SLD where the exchange Profile is present.
Message was edited by:
n Khan -
Not able to see Enhanced Data type in SPROXY in SRM
Hello Experts,
We are planning to use an outbound (SRM to PI) Proxy between SRM and PI to send XML messages. Our SRM team has requested a Datatype enhancement of SAP's predelivered SCV, SAP SRM SERVER 7.0 component i.e. RFQRequest. So, In ESR we have created a new Enhanced data type based on RFQMessage (SAP's pre delivered datatype). I've added their (SRM team's) 6 extra elements to this new Enhanced Data Type, RFQMessageExtension. And, saved and activated it.
Now, to generate the Proxy I went into SRM -> SPROXY, but I donu2019t see my Enhanced Datatype, RFQMessageExtension. Please let me if you've come across this problem or know the solution. I was following this blog [/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner|/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner]
Thanks,
MayurHi Mayur,
Have you read this article?
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0bb5687-00b2-2a10-ed8f-c9af69942e5d
Regards,
Ravi kanth talagana -
How can we assign sproxy generated objects to a different package?
Hello Expert,
We need to change the package assigment of sproxy generated DDIC objects. How can we assign sproxy generated objects to a different package?
Regards,
ThulasiAny idea?
-
Component SAP ABA 7.02 does not show up in sproxy in CRM 7.0 EhP 1
We upgraded our CRM system from CRM 7.0 to CRM 7.0 EHP 1.
This involved an upgrade from NetWeaver 7.01 to 7.02, i.e. also ABA 7.01 to 7.02.
In sproxy in the CRM system we can only see
SAP CRM ABAP 7.0
SAP_BS_FOUNDATION 702
various custom software components.
SAP ABA 7.02 with the interfaces for e.g. business partner distribution is missing.
(When switching to the local view, they are shown and BP replication works.)
So I went into the SLD and looked at the technical system for CRM. Indeed the product "SAP NetWeaver SAP EhP 2 for SAP NetWeaver 7.0" was not marked as installed. So I added it. On the right-hand side under Software Component Versions "SAP ABA 7.02" is now listed.
i then went to the business system for one of the clients and also selected the product "SAP NetWeaver SAP EhP 2 for SAP NetWeaver 7.0" there and I can see the SWCV "SAP ABA 7.02".
I tried restarting both the PI and the CRM instances.
Nevertheless in sproxy in CRM nothing changed.
What else could be missing?senthilprakash selvaraj wrote:
> To be very specific,
>
> Login to SAP CRM system.
> Goto: SYSTEM-->status
>
> In there under SAP SYSTEM DATA group, you will be able to see a "Magnifying Lens" icon just below Component Version field --> click it
>
> there you will be able to see the exact version&level of the component.
Yes, that's where I copied that line
SAP_ABA 702 0009 SAPKA70209 Cross-Application Component
from.
senthilprakash selvaraj wrote:
> Now ask your basis team to deploy the same version&level in SAP PI as its shown in the CRM system.
Ah, the PI/XI content could be missing, even if this shows up in the list of products and software component versions in the SLD?
I have just checked in the ESR, that seems to be the problem, thanks.
senthilprakash selvaraj wrote:
> Note: Thou the release version might be same, the level of the component deployed in both the system might be different. hence the problem.
You mean if the service pack is different? I doubt that this would result in the SWCV not showing up in sproxy.
Monika. -
SPROXY not working in application system
Hello all,
I have been trying to make SPROXY work in my QAS ERP 2004 SPS23 system
for a few days now but I can not make it. I have
configured SPROXY in the past for my sandbox and DEV system with
success but I do not seem to have any luck in QAS.
My PI landscape consists of sandbox, developement, qa and production
systems. The version is PI 7.0 SPS21
My ERP landscape consists of the same 4 systems but in version 6.40 -
ERP 2004 SPS23
All non production systems use a central SLD that runs in the PI development
box (PID)
The error message I get is as follows:
When I run SPROXY in ERP QAS client 330, I get : "No connection to Integration
Builder (only local data visible)"
When I do Goto --> Integration Builder, I get the message "Integration
Builder address not maintained"
However, when I do Goto --> Connection Test, from the 4 reports I have
to run, two work and two do not work:
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS works and shows the correct address for Integration repository
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION works
The other two reports
=>Check with report SPROX_CHECK_IFR_RESPONSE
==>Check with report SPROX_CHECK_IFR_CONNECTION
return: Integration builder data not undestood.
SLDCHECK runs fine: All green and invokes correct IE session with the correct SLD URL (central SLD)
SLDAPICUST shows the correct SLD (central)
SXMB_ADM --> Integration Engine Configuration shows the destination RFC
SAPIS_PIQ
which is defined in SM59 as type H and works fine
TCP RFCs LCRSAPRFC and SAPSLDAPI work
The corresponding JCos in Visual Administration look ok
I have registered the queues in SXMB_ADM and they registered ok .
The /sap/xi/engine service is active in both the application system and the PI system (QAs and PIQ)
Finally the exchange profile settings in PIQ are fine as well
com.sap.aii.connect.repository.name : piqas.finance.local
com.sap.aii.connect.repository.httpport : 50000
com.sap.aii.connect.repository.contextRoot :rep
com.sap.aii.connect.integrationbuilder.startpage.url : rep/start/index.jsp
com.sap.aii.applicationsystem.serviceuser.name: PIAPPLUSER
and the password is set.
PIAPPLUSER is service user and is not locked.
I have tested SLDCHECK in PIQ and SLDAPICUST and they look ok as well.
Any other clues? Any way I can investigate further via checking logs
and traces to find out what is wrong?
The "Data not understood" message is not helping me much in determining
what is wrong
Many thanks
AndreasHi Andreas,
Please go through the below blog which explains you step by step in proxy connectivity.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards,
Naveen. -
Error While Creating Proxy in SPROXY
Hi All,
We Created one Packagewith NAme ZPACK1 in SE80.
While Creating Proxy in SPROXY TC, it is Asking Package & Prefix
We gave Package as ZPACK1 & Prefix as ZPREFIX.
Then One Error is Comming Like <b>"Package ZPACK1 has no use access to package interface SAI_TOOLS"</b>
Please let me Know the Solution for this Error.
Regards
BopannaHi,
The packages that contain or use proxy objects must have a use declaration for the package interface SAI_TOOLS. In addition, the corresponding structure package must contain a use declaration for the package interface SAPPINT.
For the proxy runtime, a use declaration must be available for the package interface SAI_SXMS.
Generating Proxies By Using Transaction SPROXY
1. Call transaction SPROXY in the system in which you want to generate a client or server proxy.The system displays a navigation tree on the left-hand side of the screen; it has the same structure as the interface maintenance tree in the Integration Builder. The interface objects are ordered according to software component version, namespace and object type
If no connection to the Integration Repository exists, the system only displays
interface objects in the tree structure for which a proxy exists in the system.
2. Choose an interface object for which no proxy already exists. To create a proxy for this interface object, double click the context menu Create Proxy.
3. In the dialog box, specify the name of the package where you want to create the proxy objects. You can also specify a prefix for the names of all objects to be created to avoid naming conflicts with names that already exist in the system.
Other way.. try this :
Generating Proxies By Using the Object Navigator (Transaction SE80).
1. Call the Object Navigator (transaction SE80) in the system in which you want to
generate a client or server proxy. Select a package and call the context menu. Choose Create → Enterprise Service / Web Service → Proxy Object.
2. In the subsequent dialog window, choose the source of the WSDL document (URL/http destination, local file, UDDI or XI Repository).
If you choose XI Repository as the source of the WSDL document, the hierarchy of the software component versions in the Integration Repository is displayed in the
subsequent window. The interface objects are ordered according to software
component version, namespace and object type . Choose an interface object for which no proxy already exists and confirm by choosing Copy.
3. In the subsequent dialog window, enter the name of the package where you want to create the proxy objects. You can also specify a prefix for the names of all objects to be created to avoid naming conflicts with names that already exist in the system.
Hope this will help you a bit.
Regards
Aashish Sinha
PS : reward points if helpful -
Unable to activate Sproxy generated objects in SRM 7.0
HI,
I have an interface from SRM->XI->SAP, i have created Data type, Message Type and Message interfaace in PI7.0
all are replicated in SRM 7.0 at SPROXY t.code, i created proxy by right click on service interface then proxy has been generated.
while activating the proxy, i am facing the below error i.e DDIC Object TABL ZADDRESS has package check errors.
can any one help me how to resolve the same.
regards
Mahesh.Hi,
Check the below link:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/f49b21674e8c44940bb3beafd83d5c/frameset.htm
Add SAI_TOOLS Package Interface in the "Use access" tab. -
SPROXY Displays Nothing in SAP R/3
Hi,
Iam working on ABAP proxy between SAP R/3 4.72 and XI3.0, I have added addon XI APPINT on R/3 and updated APPINT patches to SP6.
We ran successfull test in R/3 4.72 side SLDCHECK,sldapicust,LCRSAPRFC,etc.. with out any errors.
When we try to execute SPROXY in R/3 side it shows nothing except <b>Software component versions (devserver:50000/rep)</b>
below that it is not displaying SAP_BASIS component.But which is dispalying in XI side.
Please suggest.
Thanks,
ShaikHi Suman,
Here are some links to help you..
SPROXY transaction shows nothing
Software component name not visible in SPROXY
SPROXY - No connection to the Integration Builder
http://help.sap.com/saphelp_erp2005/helpdata/en/3b/6f5c3c3806af06e10000000a11402f/frameset.htm
cheers,
Prashanth -
How to change the PREFIX of a ABAP proxy in SPROXY transaction?
Hi Experts,
I created a ABAP proxy by right clicking (CREATE PROXY) the Service Interface in SPROXY transaction.
At the time, I have given ZMY_XI_ as a prefix in the box of PROXY of tab of properties, fine. Now I need to change the PREFIX, so, clicked the pencil button and changed and trying to SAVE or ACTIVATE, but am getting message saying that "Name must begin with YXI_II"
Pls. let me know that even though SAP has given this field as editable field (on clicking the pencil button), why still am getting this error?
How to get my requirement to be done?
Thank youHowdy,
You have to delete the proxy (save any code you've done first) and start again with the prefix you want - as all subobjects need to be generated with the same prefix.
Cheers
Alex -
How to create object in sproxy--
Hi all
i am new to XI
how to create a new object in sproxy transction
there is no such option called create in sproxy transction , i can only see a option called edit object
kindly hepl me out , to create new object in spoxy.Hi,
What do you mean by create a new object in the proxy?
Means you want to generate the proxy class?
if yes then we have two proxies
1. Client Proxy: If the sender is R/3 then we have to create the client proxy, by using one SE38 program we can call this proxy
2. Server Proxy: If the R/3 is at receiver side then we call this as server proxy. it executes by itself.
Client proxy:
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Server Proxy:
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Proxy generation
http://help.sap.com/saphelp_nw04/helpdata/en/ba/d4c23b95c8466ce10000000a114084/content.htm
If you create the Service interface or message interface in the XI/PI then that interface we can view in the R/3 system when we execute the SPROXY transaction.
Regards
Ramesh -
Unable to see method exception EXECUTE_ASYNCRONOUS in sproxy
Hi,
I am trying a file to proxy scenario for the inbound message interface(Aync-inbound) I made and configured
the scenario for file 2 proxy but in R3 side "Sproxy" --> create proxy with prefix as cl_ and generate proxy.
But in method exception under my class i donot see EXECUTE_ASYNCRONOUS, Instead i see my Inbound message interface name.
Why i am not able to see the EXECUTE_ASYNCRONOUS in method exception.
Regards,
Anirban.Hi Anirban,
Execute_Asynchronous or Execute_Synchronous method does not exists any more in XI 7.0 SP 14 or higher.
Don't worry about this. There will be method with the same name as your Interface Name. Write your code inside that and you will be good to go. We have recently implemented the same and it works absolutely fine.
Thanks
Amit -
Hi All,
1.how can i get the data into sproxy(application system) from integration builder(integration server)?.
2.how to do setting in TC SM59 for http destination for this?
3.pls give abap mapping scenario
Thanks & Regards,Hi Srinivas
<b>for more details check these also</b>
<b>How to use abap mapping in XI</b>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
<b>Have a look at this document...</b>
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
Hi Refer this Pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
This Blog also
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
/people/ricardoandres.maienza/blog/2007/04/06/how-to-call-xi-abap-mapping-via-rfc
Help link - http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
<b>
An excellent How to guide on the same -</b> https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/15ecdf90-0201-0010-d792-941a3c3c30a4
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
https://websmp101.sap-ag.de/~sapdownload/011000358700003082332004E/HowToABAPMapping.pdf
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
/people/r.eijpe/blog
ABAP Mapping Vs Java Mapping.
Re: Message Mapping of type ABAP Class not being shown
<b>Start with this...........</b>
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
This document will help you to create ABAP Mapping .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20abap-mapping%20in%20xi%203.0.pdf
/people/ricardoandres.maienza/blog/2007/04/06/how-to-call-xi-abap-mapping-via-rfc
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
Thanks!! -
Data Type Enhancement not visible in SPROXY
Hi All,
We are implementing SRM 7.0 with PI 7.1.
We have a reuiquirement of adding custom fields in the standard message DespatchedDeliveryNotification_Out which is sent from SRM SUS. I have created the data type enhancement in the ESR in the namespace http://sap.com/xi/SRM/SupplierEnablement/Global
for the data type DespatchedDeliveryNotification. But the Data Type Enhancement is not visible in transaction SPROXY in the SRM server.
Is this the way to do it? Or there is some different method to be followed?
Please advise.
Regards,
Karen PereiraIs this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team -
Data type Enhancement in SPROXY
HI,
We are using standard software component : SAP SRM 5.5 ...
We created some data types in Datatype enhancement and link to the standard Data types.
Activated.
When we are looking in the SPROXY that Enhance Data type is not vissible..
Our Version of SPROXY is Enterprise service browser.
Any way to get that enhance Datatype into SPROXY and generate.
Kindly help me in this isssueeeeeeeeeeeee.Hello,
Create Message Interface (MI) based on message type which in turn based on your enhaced data type. After that you can see it in transaction SPROXY.
BR,
Dzmitry
Maybe you are looking for
-
Changing multiple Read Only folders to Read/Write
I have a rather large group of folders that are currently locked as Read Only which I need to change the names...I can do this on a one by one basis, but every single time I have to Get Info, Unlock, Enter Admin Password, Change Permission, Lock - th
-
Not able to use adobe reader 9 on windows 7 OS
Hi All, i have problem with adole reader 9. if i installed on PC i can able to use only PDF file but can not able to use any other executable file. all other executable flogo show icon of adobe reader. For using other executable file i need to remo
-
Cannot print crop marks in Adobe Reader 9.4.2, 10.1
Printing from an A4 pdf to A3. Using a full version of Adobe 7 or 9.42. the crop marks appear but using Adobe Reader 9.4.2 and up no crop marks appear. Show art, trim, & bleed boxes is ticked. Does Adobe Reader print these marks? Thanks in advance.
-
JDF2.0 Do not render childeren
I have a problem migrating a project to JSF2.0. The code made in JSF1.2 gives errors in 2.0 List<UIComponent> kids = component.getChildren(); for (UIComponent kid : kids){ kid.getAttributes().put("rendered", Boolean.FALSE); }Exception: javax.fac
-
How do you apply customized time spans to multiple files?
I have multiple different movie files I am using to create TIFFs. I have a customized render setting that I apply to all of the different files in the render queue. Once I apply this Render Setting to all of the files I am having to click on that s