SPRunConversion for FX Trans - Error Code #310?
Hi all,
Yesterday, I was able to get SPRUNCONVERSION to work and translate one years worth of data to a couple of other currencies.
Today, it doesn't work. We have made some changes to dimensions in the apps, but this looks different. Here's the message we're seeing this error in Data Manager:
SPRunConversion Version 7.0.112
Warning : Application without INTCO dimension
Warning : No Rate found in the opening period
20071200 - 14220 Rows Calulated
20071200 - 0 Rows Updated
*ERROR* FX-310 Timeid=20080100 - Nothing Extract from Fact - RATE
Has anyone tried to use Business Rules or SPRUNCONVERSION for FX Trans. and/or received this error code? Note: The two "Warnings" displayed yesterday as well, but don't appear to have any effect on this one.
Thanks,
Edited by: Garrett Tedeman on Jun 10, 2009 12:30 PM
Hi Prasanth,
Well, that is one long list of codes. I've copied it out of the thread and are going to analyze.
Hopefully one day SAP will put those in the online manual or something.
Thanks,
Garrett
> Update: Hey, even though that list of error codes is apparently out of date, I searched through it and found one that more-or-less matched what I had!
Amazing, but that led me to the fix -- I had the rates entered on the wrong Category (Plan vs. Actual). Changed it and was good to go.
Edited by: Garrett Tedeman on Jun 10, 2009 2:45 PM
Similar Messages
-
TS3694 why won't my iTunes connect to the iTunes store ? (error code 310)
I have a laptop with windows 7. i uninstalled and reinstalled iTunes 4 times already and I keep getting the same error message that I can't connect to the itunes store (error code 310) and there is nothing on here that helps me. I tried everythimg and it still doesn't work.
Hi, Darron32.
Thank you for visiting Apple Support Communities.
Below, you will find the best troubleshooting articles for issues connecting to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Regards,
Jason H. -
Error code 310 when I try to acces iTunes store or activate Home Share.
I have been trying to set up Home Share on my computer and I keep gettinto and error message that pops up and says "Error Code 310 please try again later" This has been going on for weeks and I just now noticed that the same error code happens why I try to login and make a purchase in iTunes. Does anyone know how to fix this?
This is probably due to a connection error.
I fixed this by navigating this route:
Control Centre > Network and Internet > Internet Options > Connections Tab > LAN Settings > Untick proxy server box (if ticked).
Hope this solved your problem! -
Goods receipt not possible for delivery 80016425: error code 4 in MIGO
Hi friends,
I created STO from ME21N tr.code(document type:UB), then I created outbound delivery from VL10B tr.code based on STO.
After that, goods issue is made by vl02n.Lastly , when I want to make a goods receipt based on outbound delivery from MIGO
(with mvmt type:101),it gives me error about"Goods receipt not possible for delivery 80016425: error code 4 in MIGO tr.code" .
Take your opinionsHi,
Error 4 indicates there is/are no delivery item/items.
Check following options:
option-1--->Check material number extended to the both plants with storage locations
option-2--->Check the material received already WRT the delivery
option-3---> Check confirmation control key in material that needed in creation of an inbound delivery to have GR process
option-4--->Check The latest goods receipt date in STO
option-5--->Check(done any setting) if any billing to be done after PGI and then can do GR WRT delivery
Regards,
Biju K -
Goods receipt not possible for delivery 800001597: error code 4
Hi,
When doing goods recipt for outbound delivery in MIGO, I am getting the below message:
Goods receipt not possible for delivery 800001597: error code 4
When going in details of error messgae:
For error 4 : Check the delivery and its document .
Document flow is as below:
Step 1. PO Created
2. Delivery created with ref to PO
3.Picking
4. Shipment Created
5. Goods Issue complete.
Now what i have to check.
Thanks in advance.
RegardsCheck the link Re: MIGO
Also check OSS Note 458770 - GR for outbound delivery shipping units with batch split and Note 314765 - M7865 during GR f. delivery w/ default values 102 if it applies to your SAP version.
Regards -
Goods receipt not possible for delivery 80172554: error code 8
Hi all,
I got this error but the description does not helps to understand the issue.
Goods receipt not possible for delivery 80172554: error code 8
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1 : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5 : The delivery must be related to a purchase order or
the customer must be a retail business.
Error code 7 : Check the settins for your movement types.
CDPlease check this answered link:
Re: MIGO
Re: Inter comapny PO-
Goods receipt not possible for delivery 800015869: error code 1
STO Problem while doing GR against outbound delivery
Edited by: Afshad Irani on Jun 2, 2010 7:13 PM -
Goods receipt not possible for delivery 800015869: error code 1
Dear friends,
I am doing MIGO-GR for outbound delivery, but getting error once inputting outbound delivery no.
Goods receipt not possible for delivery 800015869: error code 1
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1 : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5 : The delivery must be related to a purchase order or
the customer must be a retail business.
Error code 7 : Check the settins for your movement types.
Any poniters to check the setting in PO or delivery or any setting in SPRO.
Regards
AshutoshHi Anupam,
That is the requirement of my scenario
That is happening in intercompany posting.
I am explaining to you.
say total stock for article AR is 1000 ( In DC --A it is 500 and in store B it is 500)
I have two company codes X and Y
One DC (A) belongs to X and second store (B) belongs to Y.
I have stock available for say article ( am working here in IS Retail instead of material ) in both DC --A and Store --B.
Now I have created PO thru replenishment planning WRP1 , now in PO supplying plant is DC.
Now I did delivery thru VL10B and then picking and then PGI.
Now my stock is reduced in DC by PO quantity created.( let us assume it is 100)
So now total stock in DC=400
Now this stock is in transit we can check thru MB5T. so total stock in transit = 100
Now I have to do GR against delivery , if I will do GR for 100 nos , there will be no stock in transit
and stock of receivibg store (B) will increase by 100 nos.
But I am not able to do GR against delivery so I did GR against PO for say 50 nos. In this case stock in store is increase by 50 nos.
But there is another stock in transit available=50
Now why GR is not happening against delivery but it is happening against PO???
Any pointers -
Why am I suddenly getting this message from a page I have been using for 6 months(Error code: sec_error_unknown_issuer) how do I get my page back?
Did you reset Firefox recently?
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
If that is the case then you may have lost intermediate certificates that were stored in the cert8.db file in the Firefox profile folder.
Check out why the site is untrusted (see the Technical details) and if this is caused by a missing intermediate certificate then see if you can install this intermediate certificate from another source.
Some firewalls monitor secure (https) connections and send their own certificate instead of the website's certificate.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer.
You can see more Details like intermediate certificates that are used in the Details pane. -
Goods receipt not possible for delivery 540039784: error code 4
Dear Friends,
While making GR against out bound delivery for a STO system throws following error:
Goods receipt not possible for delivery 540039784: error code 4
Message no. M7865
Kindly help me out.
AshokHi
This Error indicates There are No Delivery items.
Check the delivery and its document flow.
Check the GR Refernce document being used for MIGO
Regards
Anand -
Trying to download creative cloud app and this message pops up. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. (Error code: 22)
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium -
I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!
Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
Mylenium -
Docs for plug-in error codes?
Hi,
I have deployed the plug-in in iPlanet 4.1sp8 and it is proxying requests to WLS6.0sp2
Where can I find details of any errors generated by the plug-in. For example in the
error shown below, where can I find the definition of "os error=146" ?
[27/May/2002:11:52:50] failure (26347): for host 217.34.204.9 trying to GET /Admin,
wl-proxy reports: exception occurred for backend host '10.192.32.136/7001':'CONNECTION_REFUSED
[os error=146, line 1198 of URL.cpp]: 10.192.32.136:7001'
Regards,
Graham/usr/include/sys/errno.h will give you a list of error codes.
The following err code is from OS , not from our plugin.
os error 146 means CONNECTION REFUSED,the backend can't be reached.
Kumar
Graham Dunlop wrote:
Hi,
I have deployed the plug-in in iPlanet 4.1sp8 and it is proxying requests to WLS6.0sp2
Where can I find details of any errors generated by the plug-in. For example in the
error shown below, where can I find the definition of "os error=146" ?
[27/May/2002:11:52:50] failure (26347): for host 217.34.204.9 trying to GET /Admin,
wl-proxy reports: exception occurred for backend host '10.192.32.136/7001':'CONNECTION_REFUSED
[os error=146, line 1198 of URL.cpp]: 10.192.32.136:7001'
Regards,
Graham -
Unable to update CC for desktop. Error code:2
I can not update CC tool for managing application. Error code: 2. My OS is Win 7(64bit).
Can anyone help me?Hi Tomas,
Please use the below Kb article for resolution.
Creative Cloud desktop failed to update.(Error code: 2)
Cheers,
Kartikay Sharma -
Is there a range of error codes reserved for user defined error codes?
I would like to create my own error codes for a CVI dll but I want to make sure I don't use error codes already defined for something else. Is there a range reserved for such use?
Samee thing for warnings (errorcode > 0)
ThanksI have never found a positive mention of a "safe" range of error codes available for user-defined error conditions, but I can suggest you some source of informations.
First of all, every library has its specific list of error codes, usually listed in the relative include file. All these error codes are listed in the online help too (search for "error codes" in the index tab of the help).
Second, GetGeneralErrorString () is a function that can be used to trap errors of the following libraries with a unique error function:
User Interface Library
Easy I/O instrument driver
Toolbox instrument driver
ActiveX Library
DIAdem Connectivity Library
.NET Library
DataSocket instrument driver
Network Variable Library
Real-Time Utility Library
TDM Streaming Library
UDP Support Library
This means that the error codes from this libraries do not overlap, so you could derive from its code some ranges not used by these libraries.
Nevertheless, there is not a single function for error trapping: every library has its proper list of error codes and a function to decode them in human readable form, andthere is no guarantee that these ranges does not overlap. It's up to you to trap errors from every function in the proper way.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
After replacing my Harddrive, Adobe CS2 wants to by reactivated, by activating error code 24:24 is showing,
I was asked for phone activation, but several try´s I was told phonactivation is not supported anymore.
Can someone help me?See the following for getting CS2 installed...
CS2: Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
Maybe you are looking for
-
My doubt is regarding the Action Class, now sun realesed the JSF1.0, and still do we have to return the Action class with the invoke() method (as in your example) from the action class?? or can we write a simple method in the bean class as follows pu
-
since i do not have a transducer now, i am currently generating an array of 30 random numbers. after every 5 readings a warning should be given to the user that 5 readngs are complete. this cycle should repeat. the array size is 30. please help me ou
-
How to structure several scenes (in symbols) on the main stage timeline
Hi, I'm new to edge animate but have a Flash background and I'm working in Edge Animate on a game which is structured in several scenes. Each scene I did put in a symbol. Now I wonder how to build the main timeline or the "story - controller" so to s
-
How do you handle update and delete rules for fact tables?
I have a fact table with a composite key of 5 columns. Two of the columns are FKs to the date dimension. I was setting the delete/update rules for the FK relationship in SSMS and it had a problem with me creating cascade action on the FKs that connec
-
App-V Streaming in SCCM 2012 - High Availability Possible?
Hello All, Background: I'm in the process of designing an SCCM 2012 R2 environment, and one of the things that needs planning for is App-V. Currently the client uses App-V 4.5 management servers with a mixture of 4.5 and 4.6 apps so I've been told. T