Spry Accordeon open on other label then 1st possible?

Ls,
On opening a page with the spry accordeon i constructed from a database repeat region, I want to be able to open on the current/last viewed/expanded detailset on a page update/refresh.
Currently, i always opens on spry label nr 1.
I made an update page out of it where there's a lot of lines/labels with some info, on clicking the accordion it displays the detail info and you can update some fields, theres also an update button.
After clicking the button and the database update, the accordion always opens on label 1. not the one updated.
I tried tweaking with the tabindex attribute in the accordion div : <div id="Accordion1" class="Accordion" tabindex="2">
But that doesnt seem to work.
Anybody?
Highest regards,
mac

Ls,
On opening a page with the spry accordeon i constructed from a database repeat region, I want to be able to open on the current/last viewed/expanded detailset on a page update/refresh.
Currently, i always opens on spry label nr 1.
I made an update page out of it where there's a lot of lines/labels with some info, on clicking the accordion it displays the detail info and you can update some fields, theres also an update button.
After clicking the button and the database update, the accordion always opens on label 1. not the one updated.
I tried tweaking with the tabindex attribute in the accordion div : <div id="Accordion1" class="Accordion" tabindex="2">
But that doesnt seem to work.
Anybody?
Highest regards,
mac

Similar Messages

  • Whenever I launch a new Google window, Google immediately re-opens all other windows I happen to have open but minimized. I then have to either close or re-minimize each window, one at a time. What a pain!!

    Whenever I launch a new Google window, Google immediately re-opens all other windows I happen to have open but minimized. I then have to either close or re-minimize each window, one at a time. What a pain!!

    Just to address the last point: check your History menu to see whether you have the Restore Previous Session option and use that if you can. If that is grayed out or doesn't restore everything, check the Recently Closed Windows and Recently Closed Tabs lists for other pages.
    The unwanted window may be generated by an add-on. Try disabling ALL nonessential or unrecognized extensions on the Add-ons page. Either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then, if in doubt, disable.
    Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    Any improvement?
    Here are some other things to check:
    (1) user.js file that changes Firefox startup behavior and overrides your preferences. This article describes how to track that down and delete it if you have one: [[How to fix preferences that won't save]].
    (2) Possible hijacked shortcut. Check the "target" of the desktop icon you use to start Firefox to see whether it lists the unwanted page. To do that:
    right-click the icon > Properties > Shortcut tab
    For 64-bit Windows 7, the Target should be no more and no less than this:
    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
    (3) Possible undisclosed bundle items. If you have installed any free software recently, check your Windows Control Panel, Uninstall a program for surprises. If you click the "Installed on" column head to group by date, it is easier to spot bundled junk. Remove everything suspicious or unrecognized.
    (4) Supplemental clean up scans. Our support article lists tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
    Hopefully that cures it.

  • My i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting general

    my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution

    restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired

  • Can you fix , the fact that If you leave the firefox update window open for a long period (say 20 minutes in the background), then close all other windowns, then choose to install, it uses this extra time to estimate the download?

    Can you fix , the fact that If you leave the firefox UPDATE window open for a long period (say 20 minutes in the background), then close all other windows, then choose to download update, it uses this extra time to estimate the download? (Mine said, 12 Hours to start with, but took under 2 minutes!)
    == This happened ==
    Not sure how often
    == When you install update to 3.6.4 (Possibly for every update?)

    The download should happen in the background (before you get an update window). I wonder why that didn't happen for you...\
    Did you manually check for updates?

  • When typing my password for opening my mac everything is normal until I type in any other field, then the keyboard sounds like an old typewriter and is exceedingly slow. Is there a software solution?

    When typing my password for opening my mac everything is normal until I type in any other field, then the keyboard sounds like an old typewriter and is exceedingly slow. Is there a software solution?

    Have you found a solution yet?

  • Page scroll as spry blind opens

    Hi,
    I hope somebody can help me. I'm using a spry blind to display older posts on a blog. when the spry blind opens I can't see the full sexy animation. is there a way to have the page scroll down as the blind opens. or somehow lock onto the bottom of the page. i've tryed linking to an anchor but it dosn't work, i've looked everywhere to find a solution to no avail but i'm sure it's possible.
    many thanks
    -Paul

    "Laura Edwards" <[email protected]> wrote in
    message
    news:g756p6$euq$[email protected]..
    > Developing a new site with CS3 but am not getting
    consistent behaviour
    > with
    > standard DIV or SPRY areas.
    > On some pages the main text area containing the DIVs and
    Sprys will resize
    > when a spry accordian panel opens to be higher than the
    original page
    > height,
    > on some pages it overlaps the page base and runs off the
    bottom.
    >
    > Is there any way of getting consistent behavious, seeing
    as I don't know
    > why
    > the ones that work, do...
    >
    > For examples of problem see
    >
    http://79.170.40.182/johnholloway.co.uk/index.html
    > and surrounding pages.
    >
    > All pages controlled from one css and master template.
    Spry widgets are pretty rudimentary. I imagine you are
    talking about this
    page:
    http://79.170.40.182/johnholloway.co.uk/performance.html
    It flashes all of the Accordion content as visible first,
    then when the
    script constructor is encountered, it all snaps shut. That is
    pretty typical
    of Spry. You can get around that with some custom
    programming, which the
    Adobe Spry folks might be able to help you with - but you
    should post on the
    Spry forum instead of this one.
    Our widgets do not have this behavior, have lots more
    features and
    automation, but are not free.
    Al Sparber - PVII
    http://www.projectseven.com
    Fully Automated Menu Systems | Galleries | Widgets
    http://www.projectseven.com/go/Elevators

  • ITunes Opens to ITunes Store Then Freezes

    After always working fine, ITunes now immediately and automatically opens to the Store then freezes, soon followed by "Application Not Responding". I can't get to Library or any other folder and have to force quit. QuickTime works fine and I tried reinstalling to no avail. Any suggestions?

    A lot of people are reporting problems with iTunes and/or their iMacs crashing when accessing the iTunes store. It's likely the result of a bug in iTunes that Apple will have to fix with a software update. I submitted a feedback report to Apple on this, you might want to do the same.

  • CDs from my MAC won't open on other computers

    CDs from my MAC won't open on other computers

    Any computer, Mac or Windows?
    If so, it's likely your drive. You have no problem reading them back because your drive wrote it, so the heads are in the same place to read as write.
    The problem is the same as way back to the days of floppy disks. If a drive's heads are out of alignment, disks you create will only work well for you. On any other computer, the tracks are not in the standard position.
    To check, try using an external drive (or a different one if that's what you're already using). If the problem goes away using a different drive, then your current one is no good.

  • HELP!! Can's type in Firefox UNLESS I open another internet tab, then go back to the first tab.

    HELP!! Can's type in Firefox UNLESS I open another internet tab, then go back to the first tab! All of the sudden, out of the blue, I hear the little "beep" noise that Mac's make when, for example, you try to close a program without saving an item first. It will "beep" to make you aware that you have an unsaved document. Now, without changing anything on my computer or Firefox, I get thet "beep" when I go to Firefox and try to type in a search box, etc. The only way I can type is if I open a new tab in firefox, then go back to the first tab. Only then will I be able to type. If I use my mouse and click on another box to type on, or try to go back and edit text I have already trped using the mouse to jump to a different portion of my text, I will hear the same "beep" until I (once again) click on another tab, then return to the first tab. It is very annoying as I have to constatnly click on another tab then return so that I can type or edit any thing. I had to do this several times while editing this very paragraph!! I have uninstalled Firefox and reinstalled. Nothing changed...
    Any help????
    Thanks in advance!

    To find out if it's system wide or user specific, try this...
    Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
    Does it work in the new account?

  • Installed Adobe dlm add-on and now Firfox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME!

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793259]''
    I installed Adobe dlm add-on and now Firefox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME! I do not want to use IE! I presume it has something to do with Adobe DLM as ever since then it is not working.

    I had this problem for a couple weeks as well and it was extremely frustrating considering we use firefox for all our company tasks. Here is the solution:
    First of all if you have no bookmarks you want to save, then go directly to step 7. If you want to save your bookmarks first, then follow these steps.
    1. Shut down the computer
    2. Reboot and open firefox
    3. Go to Task Manager, right click firefox.exe, and click END PROCESS TREE
    4. WAIT 30 SECONDS! Then Double-click the shortcut to try and open firefox again
    5.Repeat steps 3 and 4 until firefox finally opens (trust me, eventually it will)
    6. Once it finally opens, backup your bookmarks,
    7. Download a copy of firefox from there website
    8. Uninstall from programs menu and make sure to check the box REMOVE ALL COMPONENTS
    9. install the new copy and BOOM! it works
    If it doesn't work, you're an idiot. If you don't want to reinstall firefox, then you're out of luck. Good Luck!

  • Unable to open templates from server input form folder and server root folder from some system while the same can be open from others system

    Hi,
    I am unable to open input scheduled from server root folder and also from input form folder on some system while they can be open from others system.
    Please advice.
    Thanks in advance

    Hi Hengye,
    While opening , it dont give any error. When I try to open it , it takes some time to load then nothing happen.However I can open it on other system but not on mine my collegue and user system.
    Please advice.
    Thanks.

  • I opened an itunes account then forgot my password. I opened a new account now I would like to combine my two accounts into one but I still can't remember my password and now I have a new email account. Help!

    I opened an itunes account then forgot my password. I opened a new account now I would like to combine my two accounts into one but I still can't remember my password and now I have a new email account. Help!

    You can't combine accounts but help here Apple ID FAQ's for resetting your Apple ID password.

  • Bought Premier Elements yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until

    Bought Premier Elements 13 yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until my pw is recognized. Accept agreement. Agreement screen disappears and I'm back where I started. Try to open video clips with editor again and get the same demand to log in. Please advise asap. thx

    Oldcameraman
    Please do not duplicate a thread. The threads are answered as soon as possible. We are not Adobe. Just user to user.
    I have answered your most recent of the duplicates
    Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work
    It is uncertain just how far we can go to help you since you do not appear to have Premiere Elements any
    longer.Seems you demanded a refund from Adobe Chat, got it, and now are left with a non purchased program which I
    am not sure can be used.
    Duplicates tend to confuse the person asking the question as well as those attempting to reply. As I suggested in the
    above mentioned thread, try to sort out your situation with Adobe via its Adobe Chat.
    ATR

  • Every time I open a second document the 1st one slides off the screen and I have to reopen everything.  I want to view more than 1 document at the same time.

    How can I view and work on more than one document at a time?  I've never had a problem with this but suddenly every time I open a new document the 1st one slides over out of sight.  How do I get that to stop?

    Hi bbd,
    Here is a screen shot of two documents open side by side. Drag the first document to the left of the screen. Open another document and drag it to the right of the screen.
    I have not had an open document slide from view. Puzzling!
    Regards,
    Ian.

  • Edited clips will not open with other apps

    After editing video clips using Adobe Premiere Elements, clips will not open with other apps (like VLC, Media Player, etc...)

    Sherbowe
    Just saw your post and wanted to leave a just in case note.
    From the information that you and John T. Smith just exchanged, it would appear that you attempted to play back the saved project file (project.prel) with your VCL Player and Windows Media Player. You need to export the Timeline content to a file format that is supported by the player of your choice. By now, you have probably been there and done that.
    This is the just in case note about projects and their project.prel file....let us say that you have two separate projects and you decide to put the content of one project into another. Cannot do. One cannot import a project.prel into another project.prel. You would have to export the Timeline of one and then import that export in the other project. Alternatively, those with Premiere Elements 8.0/8.0.1, 9.0/9.0.1, and 10 could use the ClipMate program to copy/paste between programs without issues. However, with Premiere Elements 11 there are some problems in that regard.
    ATR

Maybe you are looking for