Spry Accordian turns blue in IE 7 when selected.
Hello,
I built a spry accordion which turns blue, actually all of
the menu items, when selected in IE 7.
What do I need to do?
Thanks,
Ed
Post a link to the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"lonewolfjujutsu" <[email protected]> wrote
in message
news:g5ehcp$el9$[email protected]..
> Forget the last post. I still have the "blue box"
problem!
>
> Any ideas?
>
> Ed
Similar Messages
-
My macbook pro turns blue and freezes
my macbook pro turns blue and freezes, especially when using hotmail. It blinks blue when switching in hotmail pages. Once fully blue I have to restart it as it crashes
Step by Step to fix your Mac
-
I was having some problems with my mac, safari and itunes was freezing alot. I have to force shutdown and when I tried to start up again i get to the login page, type in my password and it starts to load, but then the screen turns blue for a few seconds and it goes back to the log in screen. What should I do?
Please Help!!Somewhat similar problem:
Put in the password, hit enter, the screen goes blue for half a second, then goes back to login screen and carries on logging in as usual. Drives me mad. It doesn't happen with a fresh Lion installation, nor if booted into safe mode. On the machine in question it also happens to new user accounts.
I've removed all login items, including Startup Items and Launch Demons (pun intended) and Agents, I've compared system login plists with a fresh Lion installation - can't see differences. I've removed Little Snitch and PeerGuardian (no more third party kexts).
@Carolyn: I've done disk maintenance with DiskUtility and fsck and even DiskWarrior, cleaned caches, etc. etc.
Any ideas would be gratefully received.
Sorry for trying to hijack the thread (as it's not about Lion), but it seemed dead anyway. -
When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.
Iv tryed this numerious times still keeps going back to pasword. Can not get any further. Tried restart holding shift key.. still nothing. What do i do?Thank you for your help.
I couldnt get to the hard drive/ desktop. Soft login not even working. So i could not do any of that.
In the end i took it to Apple and its actually the hard drive on its way out. A common issue with that series of Mac. Funny seeing i dont use this mac much. However being 2.5 years old and out of warrently, Apple have recognise this issue with this series/ Model and installing a new hard drive at no cost.
Very luck and greatful. And not feeling so dumb that it was something i did or could troubleshoot myself.
Hope this helps others that it just might be your hard drive failing. -
Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem
Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.
-
my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
disk utility give me this:
Process: Disk Utility [371]
Path: /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier: com.apple.DiskUtility
Version: 11.5.2 (298.4)
Build Info: DiskUtility-2980400~60
Code Type: X86-64 (Native)
Parent Process: launchd [86]
Date/Time: 2013-11-05 03:29:41.247 -0500
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 9522 sec
Crashes Since Last Report: 29
Per-App Interval Since Last Report: 981 sec
Per-App Crashes Since Last Report: 25
Anonymous UUID: F6B8E263-76C8-4C7D-AA58-48134BF4BA78
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libobjc.A.dylib 0x0000000100c62fbc _read_images + 312
1 libobjc.A.dylib 0x0000000100c79721 map_images_nolock + 1266
2 libobjc.A.dylib 0x0000000100c62761 map_images + 115
3 dyld 0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
4 dyld 0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
5 dyld 0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
6 dyld 0x00007fff5fc08f7c dlopen + 490
7 libSystem.B.dylib 0x0000000100a14e40 dlopen + 61
8 com.apple.CoreFoundation 0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
9 com.apple.CoreFoundation 0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
10 com.apple.Foundation 0x0000000101008355 _NSBundleLoadCode + 638
11 com.apple.Foundation 0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
12 com.apple.Foundation 0x000000010101960c -[NSBundle principalClass] + 38
13 com.apple.framework.DUSupport 0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
14 com.apple.framework.DUSupport 0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
15 com.apple.DiskUtility 0x0000000100006082 0x100000000 + 24706
16 com.apple.DiskUtility 0x0000000100005f59 0x100000000 + 24409
17 com.apple.AppKit 0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
18 com.apple.AppKit 0x00000001013e1f77 -[NSWindowController window] + 112
19 com.apple.AppKit 0x00000001015f61d9 -[NSWindowController showWindow:] + 47
20 com.apple.AppKit 0x00000001015c7c5c -[NSDocument showWindows] + 98
21 com.apple.AppKit 0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
22 com.apple.AppKit 0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
23 com.apple.AppKit 0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
24 com.apple.AppKit 0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
25 com.apple.AppKit 0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
26 com.apple.Foundation 0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
27 com.apple.Foundation 0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
28 com.apple.AE 0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
29 com.apple.AE 0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
30 com.apple.AE 0x0000000104d7312b aeProcessAppleEvent + 210
31 com.apple.HIToolbox 0x00000001028a0619 AEProcessAppleEvent + 48
32 com.apple.AppKit 0x00000001013fc095 _DPSNextEvent + 1191
33 com.apple.AppKit 0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
34 com.apple.AppKit 0x00000001013c168f -[NSApplication run] + 395
35 com.apple.AppKit 0x00000001013ba3b0 NSApplicationMain + 364
36 com.apple.DiskUtility 0x0000000100002009 0x100000000 + 8201
37 com.apple.DiskUtility 0x0000000100001db8 0x100000000 + 7608
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x0000000100a27c0a kevent + 10
1 libSystem.B.dylib 0x0000000100a29add _dispatch_mgr_invoke + 154
2 libSystem.B.dylib 0x0000000100a297b4 _dispatch_queue_invoke + 185
3 libSystem.B.dylib 0x0000000100a292de _dispatch_worker_thread2 + 252
4 libSystem.B.dylib 0x0000000100a28c08 _pthread_wqthread + 353
5 libSystem.B.dylib 0x0000000100a28aa5 start_wqthread + 13
AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data) -
I tried to update my iPod 4th generation while it was charging and when I came back to check on it the screen was red and it wouldnt go off, and my ipod wasnt charging like it was supposed to. I found out how to get the color of the screen off but my ipod always has the low battery thing and when I charge it sometimes the screen turns blue or the apple logo comes up bright and then it gets dim and stays there. My ipod wont turn on, and I really want it to work again. Help me please! Also, I noticed my ipod battery hasnt been lasting long as it should efore this happened.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Whenever I try to insert an email address or a link to a website, I no longer get the automatic hyperlink (turning blue and underlining). Also if I try to change the font color on some text it either doesn't change from black or it changes to a different color. (If I try to change to red, I get dark green; change to a bright green, I get dark red; change to blue or yellow, I get black).
I tried removing and reinstalling Firefox to no avail. Earthlink is clueless.
This all works properly using Internet Explorer.When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?
These features rely on JavaScript, and it sounds as though you have scripting enabled if you get (the wrong) color changes. Some add-ons might alter the way scripts operate, so a standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode."
If those features work correctly, this points to one of your extensions or custom settings as the problem.
To also disable plugins, you can use this page:
orange Firefox button ''or'' classic Tools menu > Add-ons > Plugins category
Any change? -
Is there a way to prevent an image from turning blue when selecting it?
I'm exported a pdf from InDesign that will be used as a brochure for one of the exhibitions at our museum. I'm wondering if there's any way to prevent an image from turning blue when a reader clicks on it. Since all of the images are works of art, I'd rather that they not change color when people click on them.
I changed the security settings so the images couldn't be copies, hoping that would prevent the blue square, but it didn't help.
thanks for any suggestions.
ChrisThere are several ways to do that and here are but two of them.
1. If you want to make a new image you can right click on the channel, click on Duplicate Channel and under Destination>Document, select New
2. If you want to add a new layer to your document, click on the channel in the channels panel, go to Select>All, then Edit>Copy, click on RGB in the channels panel and then Edit>Paste -
When I was typing an email on my iPad, I hit some part of the screen (not sure which part !)which made the type in the paragraph I was writing turn blue, and a vertical line appeared down the left hand boundary of the paragraph ! How do I get rid of the blue type and blue vertical line ?
A single tap of the blue does nothing ! A double tap offers copy, define, select all.
-
Help: Clips rendered in AE turn blue when changing clip speed and exporting in Premiere Pro
Hi
I've been having this problem in Premiere Pro CS5 (I'm just not sure with CS4 & ealier versions).. ok the problem is that in Premiere Pro CS5 when I change the speed of a clip that is rendered in After Effects and export it either in AVI or in MOV, it produces some blue flicker on that clip or sometimes the entire clip turns blue..This only happens when I am using Quicktime Animation codec in AE..I can't find any forum that discusses this problem..And I don't know if others are also experiencing this (except for my friend who is also experiencing this in MacOSX)..by the way my version of Premiere Pro is 5.0.3 and my After Effects is 10.0.2.4 (Windows 7 x64)..I don't know know if this is a bug in PrPro or AE, or if Adobe is aware of this problem..
Here's a video of what I am consulting to you guys for you to better understand what I'm saying.. (sorry, no audio)
P.S. CS5.5 users please tell me if you also experience this..
Thanks in advance!This only happens when I am using Quicktime Animation codec in AE
So don't do that. It's probably not the best choice for video, anyway. I mean it says right in the name - "animation". There's a reason for that.
On a Windows machine, Lagarith and UT are two free lossless codecs that play well within the Adobe suite. Give them a try.
Or better yet, don't render out of AE at all. Use Dynamic Linking instead. -
Why do some text messages when sent to same user turn blue and say delievered and some turn green say sent as text message
I fully disagree. The problem is not solved this way as indicated by jessikafrombrighton in response to stevejobsfan0124. In addition, if the wireless is down, the message IS NOT automatically sent as SMS. Many other posts mention this problem.
-
When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David
Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H. -
When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?
Anna...
Could be the graphics card.
Run the Apple Hardware Test -
Like i stated i'm having a problem with every time i type into a search bar or box of any kind including log ins and such the box turns blue, and in many cases makes it so i can not read what i am typing. Tried same website on IE and they worked fine so i assume it's firefox, is there anything i can do about it
For me, the google search bar turns blue once I've typed in a search term, but then want to click on it again to change or add something. The entire bar turns blue. I can still type, but it's hidden. Then when I click Search, it does bring up my search results and now the terms I've written are showing in the search bar, with no blue.
The only way to get out of it when the blue is there, is to reload the page.
Maybe you are looking for
-
I can't update apps because iphone 5 is asking for the password to a different itunes account
In my settings under iTunes and App Store I am signed in with my iTunes account. However, when I go to update apps it asks me for the password to a different iTunes account - that of my partner who also uses my iMac. I've tried signing out and signin
-
Any suggestions?
-
AS2 Sender problem with German "Umlaute"
Hello experts, I have an AS2 sender adapter sending orders into my SAP system. My problem is though that it deletes all German "Umlaute" before converting it into XML. I used to use the "CallBicXIRaBean" to do the Encoding with ISO-8859-1 and it did
-
Stock transfer between storage location in IS -Retail
Hi, I want to have a Stock transfer order between two storage locations in the plant. I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab. Having that i get an error message
-
Hi - I am trying to do a Booklet Print of a 20-page pdf document, which appears to work successfully, except that the reverse pages are printed upside down. (i.e. back of page 1 is page 19 inverted). Printer is a HP 4600dn The document opens in Adobe