SPry fails validation
I'm having trouble getting my spry page to validate to XHTML
1.0 Transitional
Here is the link, is it possible?
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.w00tdesign.co.uk%2Fportfolio. php
thanks in advance
Here is some reading for you:
http://labs.adobe.com/technologies/spry/articles/best_practices/validating_spry.html
and
http://labs.adobe.com/technologies/spry/articles/best_practices/index.html
especially:
http://labs.adobe.com/technologies/spry/articles/best_practices/progressive_enhancement.ht ml
and working samples:
http://labs.adobe.com/technologies/spry/samples/dom_utils/unobtrusive_spry_data.html
http://validator.w3.org/check?uri=http%3A%2F%2Flabs.adobe.com%2Ftechnologies%2Fspry%2Fsamp les%2Fdom_utils%2Funobtrusive_spry_data.html&charset=%28detect+automatically%29&doctype=In line&group=0
Hope this helps.
Donald Booth
Adobe Spry Team
Similar Messages
-
Hi All,
Have just implemented some spry elements into my site but
it's failing validation due to the spry.
there is no attribute "spry:region" and there is no attribute
"spry:repeat"
Anybody know of any work arounds for this?
Cheers,
Simonhttp://labs.adobe.com/technologies/spry/articles/best_practices/validating_spry.html
Ken Ford
Adobe Community Expert - Dreamweaver/ColdFusion
Fordwebs, LLC
http://www.fordwebs.com
"simonEntertainmentStore"
<[email protected]> wrote in message
news:g5gufr$6ps$[email protected]..
> Hi All,
>
> Have just implemented some spry elements into my site
but it's failing
> validation due to the spry.
>
> there is no attribute "spry:region" and there is no
attribute "spry:repeat"
>
> Anybody know of any work arounds for this?
>
> Cheers,
>
> Simon
> -
Dimension 'Years' failed validation
Hi All,
I am getting this error while deploying the application.
Error : Dimension 'Years' failed validation 'YearMembersSequential' for the following reason(s): Year members must be sequential.
I am seeing my Year dimension is sequential only.
I am not able to figure out the reason for this error . Can anyone please help me understand this.Not to open a new thread as I have an issue with dimension Year as well, I will post my problem here (hope the author won't mind).
I created a simple EPMA application in version 11.1.2.2 with all mandatory and 2 generic dimensions. One of mandatory dimension is, of course, Year (dimension type: Year) with following members: FY11, FY12, FY13. Initial deployment against both, Planning and Essbase went well. After that I wanted to extend dimension Year for member FY14 and to redeploy the application. Validation was successful, but deployment message was "Completed/With Errors" (100%). Deployment was done with selecting "Refresh outline" and "Full deploy". In deployment log file I have the following entry:
"Consolidation operators for years must be set to Ignore for all plan types."
"Rejecting Member FY14."
This message is clear enough, but the problem is that members that belong to dimension type Year don't even have consolidation operators in properties area.
What else comes to my mind is that (maybe) with version 11.1.2.2 it is not allowed to add new members for dimension Year once application is deployed for the very first time. But in that case, the above error message is quite misleading. Under version 11.1.1.3 it is possible to add new members to dimension Year and to redeploy it without errors.
Is this a bug or a feature?
Has anyone had such problem?
Thanks,
Damir -
Apple's Audio Units Fail Validation in Yosemite
Why do Apple's audio units fail validation in Yosemite
Anyone else having this problem ?
What's the fix ?
Even Logic Pro X 10.0.7 can't validate Apple's AU plugs.
[Rant: i have never been so disappointed with a Mac OS as i am with YO. Most of my midi/audio/video programs will not work because of the validation of AU/VST plugs. I am this close to trashing Yosemite . It reminds me of my OS 9 days: if you even looked in the wrong direction the system stop working.]are there any AU plugs here, in the components folder...?
-
File Browse is emptied after failed validation
Why does the file browse text box get emptied after a failed validation? Is there any way to prevent this?
To further explain, create a form on a page with two page items, a text box and a file browse item, then put a not null validation on the text box. When you submit the page with a null text box, but with a file selected for the browse button, then validation catches and throws the error message back to the user when the page refreshes. However, the file browse text box is emptied, and the user has to reselect the file before resubmitting the page.
Is this a bug, or just the way it is supposed to work? Any way around it?
Thanks,
Kris
Edited by: kshenn on Oct 31, 2008 7:06 AMHello,
>> Is this a bug, or just the way it is supposed to work?
This is not a bug. Actually, it has nothing to do with APEX. The behavior of the file browse item is controlled by the HTML standard, which clears the field for security reasons.
If you pay close attention to Denes example, you’ll see that even when the validation error page is displayed, the file browse item itself is being cleared. The JavaScript generated file path is the one that retain its value. I don’t have access to Denes code, but I’m assuming that in his uploading procedure he’s using the JavaScript generated path.
>> Any way around it?
Where the file browse item is concern, no workaround.
In your specific case, where the validation you need is “not null”, you can create a JavaScript validation, and fire it before submitting the page (as part of the submit button). That way, the browser will not clear the file browse item, because the page will not be submitted without proper values in your items.
Regards,
Arie. -
Server Crash : ServerIdentity failed validation, downgrading to anonymous
All,
Setup is as follows:
Domain has got an admin server and 2 managed servers.
Managed Server 1 on Machine 1
Managed Server 2 on Machine 2
Following error is continuously thrown in the logs :
<22-Jul-2010 09:54:45 o'clock> <Error> <Security> <managed1> <ExecuteThread: '2' for queue: 'weblogic.
socket.Muxer'> <<WLS Kernel>> <> <BEA-090513> <ServerIdentity failed validation, downgrading to anonymous.>
Can this 090513 error on JMS queue lead to a server crash ?
I also get the below error
<ExecuteThread: '2' for queue: 'weblogic.adm
in.RMI' : Executing(weblogic.management.internal.MBeanHomeImpl)> <<WLS Kernel>> <> <BEA-080003> <RuntimeException thrown by r
mi server: weblogic.management.internal.MBeanHomeImpl.getMBean(Ljavax.management.ObjectName;)
java.lang.NullPointerException.
java.lang.NullPointerException
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.java:109)
Regards,
RashiDoes this domain have rmi communication with another weblogic domain? If so this error would normally occur if you have not enabled domain trust between the domains. You can enable domain trust by following the steps in the below link :
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/secmanage/domain.html#wp1176064
Not sure is this alone will crash a server. Is there any other errors in the logs ? -
UI Datepicker and Spry textfield Validation
Hi, I am having a problem with using the UI Date picker and Spry textfield Validation together. I have created a sample form: 2 input boxe, the test box has the datepicker and spry validation and test2 has the date picker only,one submit button and some php code that echos the boxes values on submit.
My date picker is date formated as 'yy-mm-dd' for four digit year. My spry validation is formated 'yyyy-mm-dd' with validate on submit.
Now when I click on the test input box the datepicker comes up normally and i select a date. I then select the date on test2. Once I click the submit button the test field with spry validation come back saying a value is required and nothing else happens.
I was playing around and trying other things to get it to work and I noticed that when I select the test inputbox and the calander pops up if I enter some numbers into the text box then select a date from the datepicker then enter a date in the test2 inputbox and hit submit it works.
So it appears to me that the validation is not reading anything in the test field when I just select a date. Why is that? When I select a date it shows a date in the inputbox. It makes it hard to use the datepicker on a form.
Any help would be a preciated. Code is below.
Thanks Winrol
<?php echo "Test box 1 value = ". $_POST['test']. "<br/>" ?>
<?php echo "Test box 2 value = ". $_POST['test2'] ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<script src="jquery-ui-1.7.2/js/jquery-1.3.2.min.js" type="text/javascript"></script>
<script src="jquery-ui-1.7.2/js/jquery-ui-1.7.2.min.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="jquery-ui-1.7.2/css/base/ui.core.css" rel="stylesheet" type="text/css" />
<link href="jquery-ui-1.7.2/css/base/ui.datepicker.css" rel="stylesheet" type="text/css" />
<link href="jquery-ui-1.7.2/css/base/ui.theme.css" rel="stylesheet" type="text/css" />
<link href="jquery-ui-1.7.2/css/base/ui.datepicker.images.css" rel="stylesheet" type="text/css" />
<style type="text/css">
/* BeginOAWidget_Instance_2137022: #datepicker */
#datepicker .ui-widget {
font-family: inherit;
#datepicker .ui-datepicker {
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
#datepicker .ui-datepicker-title {
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 1.1em;
color: #000;
font-weight: normal;
line-height: 1.8em;
#datepicker .ui-state-default, .ui-widget-content .ui-state-default {
border-color: #e6e6e6;
background-color: #e6e6e6;
color: #555555;
#datepicker .ui-state-default, .ui-state-default a {
color: #555555;
#datepicker .ui-state-highlight, .ui-widget-content .ui-state-highlight {
border-color:#FCEFA1;
background-color:#FCEFA1;
color:#363636;
#datepicker .ui-state-active, .ui-widget-content .ui-state-active {
border-color: #FFFFFF;
background-color: #FFFFFF;
color: #212121;
#datepicker .ui-state-hover, .ui-widget-content .ui-state-hover, .ui-state-focus, .ui-widget-content .ui-state-focus
border-color: #5F5F5F;
background-color: #5F5F5F;
color: #212121;
#datepicker .ui-widget-header
border-color: #5F5F5F;
background-color: #808080;
border-width: 1px;
/* Text attributes for the Days of Week Text */
#datepicker .ui-datepicker table th
font-size: .8em;
color: #000;
font-weight: bold;
/* EndOAWidget_Instance_2137022 */
</style>
<script type="text/xml">
<!--
<oa:widgets>
<oa:widget wid="2137022" binding="#datepicker" />
</oa:widgets>
-->
</script>
<script type="text/javascript">
// BeginOAWidget_Instance_2137022: #datepicker
$(function() {
$('input').filter('.datepicker').datepicker({dateFormat: 'yy-mm-dd'});
// EndOAWidget_Instance_2137022
</script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
<style type="text/css">
body {
background-color: #FFC;
</style>
</head>
<body>
<form id="form1" name="form1" method="post" action="">
<p>
<label for="test">test</label>
<span id="sprytextfield1">
<input name="test" type="text" class="datepicker" id="test"/>
<span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldInvalidFormatMsg">Invalid format.</span></span></p>
<p>
<label for="test2">test2</label>
<input name="test2" type="text" id="test2" class="datepicker" />
</p>
<p onclick="<?php echo $_POST['test'] ?>">
<input type="submit" name="submit" id="submit" value="Submit" />
</p>
</form>
<script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "date", {format:"yyyy-mm-dd", hint:"yyyy-mm-dd"});
</script>
</body>
</html>This does work
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet">
<link href="jquery-ui-1.7.2/css/base/ui.core.css" rel="stylesheet">
<link href="jquery-ui-1.7.2/css/base/ui.datepicker.css" rel="stylesheet">
<link href="jquery-ui-1.7.2/css/base/ui.theme.css" rel="stylesheet">
<link href="jquery-ui-1.7.2/css/base/ui.datepicker.images.css" rel="stylesheet">
</head>
<body>
<form action="" method="post">
<span id="sprytextfield1">
<label for="mydate">Date:</label>
<input id="datepicker" name="mydate" type="text">
<span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldInvalidFormatMsg">Invalid format.</span></span>
<div id="datepicker" class="ui-glass-gradient ui-80TopTo0Bottom-gradient-header"></div>
<input name="mysubmit" type="submit">
</form>
<script src="SpryAssets/SpryValidationTextField.js"></script>
<script src="jquery-ui-1.7.2/js/jquery-1.3.2.min.js"></script>
<script src="jquery-ui-1.7.2/js/jquery-ui-1.7.2.min.js"></script>
<script>
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "date", {format:"mm/dd/yyyy", validateOn:["change"], useCharacterMasking:true});
$(function() {
$('#datepicker').datepicker({ showOtherMonths: false });
</script>
</body>
</html>
Gramps -
Failed validation as a non-ragged hierarchy
After I define a TIME dimension and try to Maintain Dimension (Loading data at first time), it encounters error as below:
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
INI: Error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
INI: XOQ-01714: "TIME_TEST_HA.TIME_TEST_HA" failed validation as a non-ragged hierarchy, Generic at TxsOqStdFormCommand::execute
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.executeBuild(Unknown Source)
at oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$1.construct(Unknown Source)
at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Here is the data from related table TIME_TEST:
SELECT * FROM TIME_TEST;
YEAR QUARTER MONTH DAY
2008 4 11 5
2008 1 2 6
2008 4 10 7
2009 1 1 1
2009 1 1 5
Any help will be appreciate!
Thanks,
SatineHi Stuart,
My OLAP version is 11.1.0.7, upgrading from 11.1.0.6.
Here is the XML file for the dimension.
<!DOCTYPE Metadata [
<!ENTITY % BIND_VALUES PUBLIC "OLAP BIND VALUES" "OLAP METADATA">
%BIND_VALUES;
]>
<Metadata
Version="1.1">
<TimeDimension
Name="DAD"
ETViewName="DAD_VIEW"
ETKeyColumnName="DIM_KEY"
ETLevelColumnName="LEVEL_NAME"
ETDimensionOrderColumnName="DIM_ORDER"
ETHierarchyOrderColumnName="HIER_ORDER">
<Hierarchy>
<LevelHierarchy
IsSkipLevel="False"
IsRagged="False"
Name="SAD"
ETParentColumnName="PARENT"
ETDepthColumnName="DEPTH"
ETViewName="DAD_SAD_VIEW">
<HierarchyLevel
DimensionLevel="YEAR">
<HierarchyLevelMap
KeyExpression="TEST_TEST."YEAR""
Query="TEST_TEST">
<AttributeMap
Name="DAD_YEAR_ID"
Expression="TEST_TEST."YEAR"">
<Attribute
Name="DAD_YEAR_ID"/>
</AttributeMap>
<AttributeMap
Name="END_DATE"
Expression="TO_DATE('2009-10-10', 'yyyy-mm-dd')">
<Attribute
Name="END_DATE"/>
</AttributeMap>
<AttributeMap
Name="TIME_SPAN"
Expression="200">
<Attribute
Name="TIME_SPAN"/>
</AttributeMap>
<AttributeMap
Name="YEAR_END_DATE"
Expression="TO_DATE('2009-10-10', 'yyyy-mm-dd')">
<Attribute
Name="YEAR_END_DATE"/>
</AttributeMap>
<AttributeMap
Name="YEAR_TIME_SPAN"
Expression="200">
<Attribute
Name="YEAR_TIME_SPAN"/>
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<HierarchyLevel
DimensionLevel="QUARTER">
<HierarchyLevelMap
KeyExpression="TEST_TEST."QUARTER""
Query="TEST_TEST">
<AttributeMap
Name="DAD_QUARTER_ID"
Expression="TEST_TEST."QUARTER"">
<Attribute
Name="DAD_QUARTER_ID"/>
</AttributeMap>
<AttributeMap
Name="END_DATE"
Expression="TO_DATE('2009-10-10', 'yyyy-mm-dd')">
<Attribute
Name="END_DATE"/>
</AttributeMap>
<AttributeMap
Name="QUARTER_END_DATE"
Expression="TO_DATE('2009-10-10', 'yyyy-mm-dd')">
<Attribute
Name="QUARTER_END_DATE"/>
</AttributeMap>
<AttributeMap
Name="QUARTER_TIME_SPAN"
Expression="200">
<Attribute
Name="QUARTER_TIME_SPAN"/>
</AttributeMap>
<AttributeMap
Name="TIME_SPAN"
Expression="200">
<Attribute
Name="TIME_SPAN"/>
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<HierarchyLevel
DimensionLevel="MONTH">
<HierarchyLevelMap
KeyExpression="TEST_TEST."MONTH""
Query="TEST_TEST">
<AttributeMap
Name="DAD_MONTH_ID"
Expression="TEST_TEST."MONTH"">
<Attribute
Name="DAD_MONTH_ID"/>
</AttributeMap>
<AttributeMap
Name="END_DATE"
Expression="TO_DATE('2009-10-10', 'yyyy-mm-dd')">
<Attribute
Name="END_DATE"/>
</AttributeMap>
<AttributeMap
Name="MONTH_END_DATE"
Expression="TO_DATE('2009-10-10', 'yyyy-mm-dd')">
<Attribute
Name="MONTH_END_DATE"/>
</AttributeMap>
<AttributeMap
Name="MONTH_TIME_SPAN"
Expression="200">
<Attribute
Name="MONTH_TIME_SPAN"/>
</AttributeMap>
<AttributeMap
Name="TIME_SPAN"
Expression="200">
<Attribute
Name="TIME_SPAN"/>
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<Description
Type="Description"
Language="ENGLISH"
Value="Sad">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Sad">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Sad">
</Description>
</LevelHierarchy>
</Hierarchy>
<DimensionLevel
Name="YEAR"
ETKeyColumnName="YEAR">
<Description
Type="Description"
Language="ENGLISH"
Value="Year">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Year">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Year">
</Description>
<UniqueKeyAttribute
Name="DAD_YEAR_ID"/>
<VisibleAttribute
Name="YEAR_END_DATE"/>
<VisibleAttribute
Name="YEAR_TIME_SPAN"/>
<VisibleAttribute
Name="YEAR_LONG_DESCRIPTION"/>
<VisibleAttribute
Name="YEAR_SHORT_DESCRIPTION"/>
</DimensionLevel>
<DimensionLevel
Name="QUARTER"
ETKeyColumnName="QUARTER">
<Description
Type="Description"
Language="ENGLISH"
Value="Quarter">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Quarter">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Quarter">
</Description>
<UniqueKeyAttribute
Name="DAD_QUARTER_ID"/>
<VisibleAttribute
Name="QUARTER_END_DATE"/>
<VisibleAttribute
Name="QUARTER_TIME_SPAN"/>
<VisibleAttribute
Name="QUARTER_LONG_DESCRIPTION"/>
<VisibleAttribute
Name="QUARTER_SHORT_DESCRIPTION"/>
</DimensionLevel>
<DimensionLevel
Name="MONTH"
ETKeyColumnName="MONTH">
<Description
Type="Description"
Language="ENGLISH"
Value="Month">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Month">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Month">
</Description>
<UniqueKeyAttribute
Name="DAD_MONTH_ID"/>
<VisibleAttribute
Name="MONTH_END_DATE"/>
<VisibleAttribute
Name="MONTH_TIME_SPAN"/>
<VisibleAttribute
Name="MONTH_LONG_DESCRIPTION"/>
<VisibleAttribute
Name="MONTH_SHORT_DESCRIPTION"/>
</DimensionLevel>
<Attribute>
<BaseAttribute
SQLDataType="DATE"
ETAttributeColumnName="END_DATE"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="True"
Name="END_DATE">
<Classification
Value="STAR"/>
<Description
Type="Description"
Language="ENGLISH"
Value="End Date">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="End Date">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="End Date">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="NUMBER"
ETAttributeColumnName="TIME_SPAN"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="True"
Name="TIME_SPAN">
<Classification
Value="STAR"/>
<Description
Type="Description"
Language="ENGLISH"
Value="Time Span">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Time Span">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Time Span">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="LONG_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="True"
Name="LONG_DESCRIPTION">
<Classification
Value="STAR"/>
<Description
Type="Description"
Language="ENGLISH"
Value="Long Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Long Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Long Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="SHORT_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="True"
Name="SHORT_DESCRIPTION">
<Classification
Value="STAR"/>
<Description
Type="Description"
Language="ENGLISH"
Value="Short Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Short Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Short Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="DATE"
ETAttributeColumnName="YEAR_END_DATE"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="END_DATE"
IsVisibleForAll="False"
Name="YEAR_END_DATE">
<Description
Type="Description"
Language="ENGLISH"
Value="Year End Date">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Year End Date">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Year End Date">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="NUMBER"
ETAttributeColumnName="YEAR_TIME_SPAN"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="TIME_SPAN"
IsVisibleForAll="False"
Name="YEAR_TIME_SPAN">
<Description
Type="Description"
Language="ENGLISH"
Value="Year Time Span">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Year Time Span">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Year Time Span">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="YEAR_LONG_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="LONG_DESCRIPTION"
IsVisibleForAll="False"
Name="YEAR_LONG_DESCRIPTION">
<Description
Type="Description"
Language="ENGLISH"
Value="Year Long Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Year Long Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Year Long Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="YEAR_SHORT_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="SHORT_DESCRIPTION"
IsVisibleForAll="False"
Name="YEAR_SHORT_DESCRIPTION">
<Description
Type="Description"
Language="ENGLISH"
Value="Year Short Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Year Short Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Year Short Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="DATE"
ETAttributeColumnName="QUARTER_END_DATE"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="END_DATE"
IsVisibleForAll="False"
Name="QUARTER_END_DATE">
<Description
Type="Description"
Language="ENGLISH"
Value="Quarter End Date">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Quarter End Date">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Quarter End Date">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="NUMBER"
ETAttributeColumnName="QUARTER_TIME_SPAN"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="TIME_SPAN"
IsVisibleForAll="False"
Name="QUARTER_TIME_SPAN">
<Description
Type="Description"
Language="ENGLISH"
Value="Quarter Time Span">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Quarter Time Span">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Quarter Time Span">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="QUARTER_LONG_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="LONG_DESCRIPTION"
IsVisibleForAll="False"
Name="QUARTER_LONG_DESCRIPTION">
<Description
Type="Description"
Language="ENGLISH"
Value="Quarter Long Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Quarter Long Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Quarter Long Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="QUARTER_SHORT_DESCRIPTIO"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="SHORT_DESCRIPTION"
IsVisibleForAll="False"
Name="QUARTER_SHORT_DESCRIPTION">
<Description
Type="Description"
Language="ENGLISH"
Value="Quarter Short Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Quarter Short Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Quarter Short Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="DATE"
ETAttributeColumnName="MONTH_END_DATE"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="END_DATE"
IsVisibleForAll="False"
Name="MONTH_END_DATE">
<Description
Type="Description"
Language="ENGLISH"
Value="Month End Date">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Month End Date">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Month End Date">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="NUMBER"
ETAttributeColumnName="MONTH_TIME_SPAN"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="TIME_SPAN"
IsVisibleForAll="False"
Name="MONTH_TIME_SPAN">
<Description
Type="Description"
Language="ENGLISH"
Value="Month Time Span">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Month Time Span">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Month Time Span">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="MONTH_LONG_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="LONG_DESCRIPTION"
IsVisibleForAll="False"
Name="MONTH_LONG_DESCRIPTION">
<Description
Type="Description"
Language="ENGLISH"
Value="Month Long Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Month Long Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Month Long Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="MONTH_SHORT_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="SHORT_DESCRIPTION"
IsVisibleForAll="False"
Name="MONTH_SHORT_DESCRIPTION">
<Description
Type="Description"
Language="ENGLISH"
Value="Month Short Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Month Short Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Month Short Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(8)"
ETAttributeColumnName="DAD_YEAR_ID"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="False"
Name="DAD_YEAR_ID">
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(8)"
ETAttributeColumnName="DAD_QUARTER_ID"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="False"
Name="DAD_QUARTER_ID">
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(6)"
ETAttributeColumnName="DAD_MONTH_ID"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="False"
Name="DAD_MONTH_ID">
</BaseAttribute>
</Attribute>
<Organization>
<AWPrimaryDimensionOrganization
MVOption="NONE"
HierarchyConsistencyRule="STAR_CONSISTENT"
AddUniqueKeyPrefix="True">
<MVCreationOptions
RefreshOn="DEMAND"
RefreshType="COMPLETE"
EnableRewriteMV="False"
UsingConstraintsClause="ENFORCED">
</MVCreationOptions>
<AttributeOrganization
CreateIndex="False"
Attribute="END_DATE">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="TIME_SPAN">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="LONG_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="SHORT_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="YEAR_END_DATE">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="YEAR_TIME_SPAN">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="YEAR_LONG_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="YEAR_SHORT_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="QUARTER_END_DATE">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="QUARTER_TIME_SPAN">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="QUARTER_LONG_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="QUARTER_SHORT_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="MONTH_END_DATE">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="MONTH_TIME_SPAN">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="MONTH_LONG_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="MONTH_SHORT_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="DAD_YEAR_ID">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="DAD_QUARTER_ID">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="DAD_MONTH_ID">
</AttributeOrganization>
<AW
Name="&AW_NAME;"/>
<DefaultBuild>
<![CDATA[BUILD SPEC SYS_DEFAULT
LOAD,
COMPILE
)]]>
</DefaultBuild>
</AWPrimaryDimensionOrganization>
</Organization>
<Description
Type="Description"
Language="ENGLISH"
Value="Dad">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Dad">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Dad">
</Description>
<TimeSpanAttribute
Name="TIME_SPAN"/>
<EndDateAttribute
Name="END_DATE"/>
<DefaultHierarchy
Name="SAD"/>
<ValueDescriptionAttribute
Name="LONG_DESCRIPTION"/>
<ShortValueDescriptionAttribute
Name="SHORT_DESCRIPTION"/>
</TimeDimension>
</Metadata>
You may want to have a test to change IsRagged="False" to IsRagged="True", then it woks well but the result is very stange.
And I find if the hierarchy is only with levels: YEAR and Quarter, then you can maintain it, but, for sure, the YEAR2009,QUARTER1 will overwrite YEAR2008,QUARTER1. If defining the hierarchy with levels:YEAR,QUARTER,MONTH, then you can't maintain it. On my opinion, it may because the data in third level MONTH can't identified the right routine to the higher level QUARTER.
Thanks,
Satine -
40222 Disabled item failed validation.
When I run a Forms app, I receive this error message after I click one of its buttons:
41012 Invalid value for field Renewal_Type
40222 Disabled item RB.Renewal_Type failed validation.
There is a radio group by that name in one of the blocks, although it has not been assigned to a canvas. I think the developer of this app may have intended it for another form that he was going to build, but never got to it; thus it's disabled. Is that what causes this error message or is it something else? How can I fix this? Thanks.
Edited by: Prohan on Sep 10, 2010 9:42 AMI found the answer here:
FRM - 40212 / FRM - 40222 error on a radio group during query
I can't say I understood the explanation for why it worked, but it did. -
AIP-13978: Error - the input xsd fails validation
Hi,
For an ebXML setup over Generic exchange. I have to perform validation against XSDs which are nested in structure.
So while setting up the Document definition in the Business action, I uploaded the files as zip files and provided the name of the root XSD file.
However on clicking finish the for business action I am getting the IP-13978: Error - the input xsd fails validation: java.lang.NullPointerException
In the log file error message is as given:
2007.03.12 at 14:40:16:093: AJPRequestHandler-ApplicationServerThread-5: BusinessLogicLayer - (ERROR) java.lang.NullPointerException
at oracle.tip.buslogic.datatypeimport.b2b.XMLSchemaImport.getXSDElement(XMLSchemaImport.java:259)
at oracle.tip.buslogic.datatypeimport.b2b.XMLSchemaImport.importXSD(XMLSchemaImport.java:609)
at oracle.tip.buslogic.datatypeimport.b2b.XMLSchemaImport.importZipFile(XMLSchemaImport.java:426)
at oracle.tip.buslogic.bll.b2b.GenericWizard.createNativeDatatype(GenericWizard.java:452)
at oracle.tip.buslogic.bll.b2b.DocumentProtocolWizard.createDocumentDefinition(DocumentProtocolWizard.java:1228)
at oracle.tip.buslogic.bll.b2b.DocumentProtocolWizard.createDocumentDefinition(DocumentProtocolWizard.java:1061)
at oracle.tip.tools.integration.buslogic.b2b.collaboration.CreateBusinessActionFinishEventHandler.performExtendedActions(CreateBusinessActionFinishEventHandler.java:245)
at oracle.tip.tools.integration.event.IPBaseUnboundEventHandler.performActions(IPBaseUnboundEventHandler.java:88)
at oracle.tip.tools.integration.event.IPEventHandler.handleEventIP(IPEventHandler.java:138)
at oracle.tip.tools.integration.event.IPEventHandler.handleEvent(IPEventHandler.java:104)
at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
at oracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown Source)
at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source)
at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source)
at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
2007.03.12 at 14:40:16:093: AJPRequestHandler-ApplicationServerThread-5: UI - (ERROR) oracle.tip.tools.integration.buslogic.b2b.collaboration.CreateBusinessActionFinishEventHandler.handleEvent(): Error -: AIP-13978: Error - the input xsd fails validation: java.lang.NullPointerException
Please let me know to resolve this issue.
Thanks,
GauthamPlease check the root xsd and it its dependent XSD are present
-
Hi, how can I modify this code for the spry textfield validation.js file? My text field is set to yyyy-mm-dd. When I enter a date and hit the submit button all works well but, how can I modify this portion of the .js file so the date yyyy-mm-dd is not less than today's date?
===================
'date': {
validation: function(value, options) {
var formatRegExp = /^([mdy]+)[\.\-\/\\\s]+([mdy]+)[\.\-\/\\\s]+([mdy]+)$/i;
var valueRegExp = this.dateValidationPattern;
var formatGroups = options.format.match(formatRegExp);
var valueGroups = value.match(valueRegExp);
if (formatGroups !== null && valueGroups !== null) {
var dayIndex = -1;
var monthIndex = -1;
var yearIndex = -1;
for (var i=1; i<formatGroups.length; i++) {
switch (formatGroups[i].toLowerCase()) {
case "dd":
dayIndex = i;
break;
case "mm":
monthIndex = i;
break;
case "yy":
case "yyyy":
yearIndex = i;
break;
if (dayIndex != -1 && monthIndex != -1 && yearIndex != -1) {
var maxDay = -1;
var theDay = parseInt(valueGroups[dayIndex], 10);
var theMonth = parseInt(valueGroups[monthIndex], 10);
var theYear = parseInt(valueGroups[yearIndex], 10);
// Check month value to be between 1..12
if (theMonth < 1 || theMonth > 12) {
return false;
// Calculate the maxDay according to the current month
switch (theMonth) {
case 1: // January
case 3: // March
case 5: // May
case 7: // July
case 8: // August
case 10: // October
case 12: // December
maxDay = 31;
break;
case 4: // April
case 6: // June
case 9: // September
case 11: // November
maxDay = 30;
break;
case 2: // February
if ((parseInt(theYear/4, 10) * 4 == theYear) && (theYear % 100 != 0 || theYear % 400 == 0)) {
maxDay = 29;
} else {
maxDay = 28;
break;
// Check day value to be between 1..maxDay
if (theDay < 1 || theDay > maxDay) {
return false;
// If successfull we'll return the date object
return (new Date(theYear, theMonth - 1, theDay)); //JavaScript requires a month between 0 and 11
} else {
return false;
======================
Thanks WinrolV1 Fusion wrote:
> Yes you can use regular expessions:
>
> function validatePhone(value){
> return
>
/^(((\+44\s?\d{4}|\(?0\d{4}\)?)\s?\d{3}\s?\d{3})|((\+44\s?\d{3}|\(?0\d{3}\)?)\s?
>
\d{3}\s?\d{4})|((\+44\s?\d{2}|\(?0\d{2}\)?)\s?\d{4}\s?\d{4}))(\s?\#(\d{4}|\d{3})
> )?$/.test(value)
> }
>
> var custom = new Spry.ValidationTextField(id, "custom",
{validation:
> validatePhone, validateOn:["blur", "change"]})
>
> regexp from
http://regexlib.com/
Excellent, thank you, that will get me in the right
direction. Its not
100%, but I think I can tinker with an expression to get what
I want.
The number is couldn't handle is +44 (0)113 255 7666 but its
not an
approved format anyway, but lots of companies still do it
this way, so I
want to ensure I get it right.
Thanks again!
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html -
OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN.
Hi
I have a package which has 10 sequence containers. Have 10 Flat File Source files and all is working perfect on BI Debug mode. When I deploy this package to server I am getting the following error.
I have changed the property Retain the same connection = True but same problem. I have changed the data flow task to Load Project instead of Load Into Project but in error message it is still showing the old name. I have tried to remove the whole step i.e.
Removed Load into Project Data flow with sequence container but I am getting the same error message.
I am not able to understand the reason. Any Idea why am I getting the same error message even I do not have the Data Flow named Load Into Package. It is in SSIS 2008 and being deployed on SQL 2012 server.
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:28:32 Error: 2014-07-22
15:28:36.86 Code: 0xC020201B Source: Load Into Project OLE DB Destination [62] Description: The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero. End Error Error:
2014-07-22 15:28:36.86 Code: 0xC004706B Source: Load Into Project SSIS.Pipeline Description: "OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN". End Error
Error: 2014-07-22 15:28:36.86 Code: 0xC004700C Source:
Load Into Project SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-07-22 15:28:36.87 Code: 0xC0024107 Source: Load Into Project Description:
There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:28:32 Finished: 15:28:36 Elapsed: 4.39 seconds. The package execution failed. The
step failed.
Many Thanks.
MH
this the error log
starttime
endtime
event
source
message
57:26.0
57:26.0
OnError
Load Into Project
The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero.
57:26.0
57:26.0
OnError
Load Into Project
OLE DB Destination failed validation and returned validation status "VS_ISBROKEN".
57:26.0
57:26.0
OnError
Load Into Project
One or more component failed validation.
57:26.0
57:26.0
OnError
Load Into Project
There were errors during task validation.
57:19.0
57:19.0
OnPostExecute
Load Into TrialBalance
57:19.0
57:19.0
OnPostExecute
Trial Balance
57:19.0
57:19.0
OnPostExecute
SSIS_LoadCheck_CoreManGroup
57:19.0
57:19.0
PackageEnd
SSIS_LoadCheck_CoreManGroup
End of package execution.
57:18.0
57:18.0
OnPostExecute
Load Into JournalLine
57:18.0
57:18.0
OnPostExecute
JournalLine
57:18.0
57:18.0
OnPreExecute
Trial Balance
57:18.0
57:18.0
OnPreExecute
Truncate TrialBalance
57:18.0
57:18.0
OnPostExecute
Truncate TrialBalance
57:18.0
57:18.0
OnPreExecute
Load Into TrialBalance
57:07.0
57:07.0
OnPostExecute
Load Into Journal Type
57:07.0
57:07.0
OnPostExecute
JournalType
57:07.0
57:07.0
OnPreExecute
JournalLine
57:07.0
57:07.0
OnPreExecute
Truncate Table JournalLine
57:07.0
57:07.0
OnPostExecute
Truncate Table JournalLine
57:07.0
57:07.0
OnPreExecute
Load Into JournalLine
57:05.0
57:05.0
OnPostExecute
Load Into UserName
57:05.0
57:05.0
OnPostExecute
UserName
57:05.0
57:05.0
OnPreExecute
Business Area
57:05.0
57:05.0
OnPreExecute
Truncate Table Business Area
57:05.0
57:05.0
OnPostExecute
Truncate Table Business Area
57:05.0
57:05.0
OnPreExecute
Load Into Business Area
57:05.0
57:05.0
OnPostExecute
Load Into Business Area
57:05.0
57:05.0
OnPostExecute
Business Area
57:05.0
57:05.0
OnPreExecute
Cost Centre
57:05.0
57:05.0
OnPreExecute
Truncate CostCenter
57:05.0
57:05.0
OnPostExecute
Truncate CostCenter
57:05.0
57:05.0
OnPreExecute
Load Into Cost Centre
57:05.0
57:05.0
OnPostExecute
Load Into Cost Centre
57:05.0
57:05.0
OnPostExecute
Cost Centre
57:05.0
57:05.0
OnPreExecute
Project Status
57:05.0
57:05.0
OnPreExecute
Truncate Table Project Status
57:05.0
57:05.0
OnPostExecute
Truncate Table Project Status
57:05.0
57:05.0
OnPreExecute
Load Into Project Status
57:05.0
57:05.0
OnPostExecute
Load Into Project Status
57:05.0
57:05.0
OnPostExecute
Project Status
57:05.0
57:05.0
OnPreExecute
Project
57:05.0
57:05.0
OnPreExecute
Truncate Table Project
57:05.0
57:05.0
OnPostExecute
Truncate Table Project
57:05.0
57:05.0
OnPreExecute
Load Project
57:05.0
57:05.0
OnPostExecute
Load Project
57:05.0
57:05.0
OnPostExecute
Project
57:05.0
57:05.0
OnPreExecute
JournalType
57:05.0
57:05.0
OnPreExecute
Truncate Table Journal Type
57:05.0
57:05.0
OnPostExecute
Truncate Table Journal Type
57:05.0
57:05.0
OnPreExecute
Load Into Journal Type
57:03.0
57:03.0
OnPostExecute
Load Into Entity
57:03.0
57:03.0
OnPostExecute
Entity
57:03.0
57:03.0
OnPreExecute
Account
57:03.0
57:03.0
OnPreExecute
Truncate Table Accounts
57:03.0
57:03.0
OnPostExecute
Truncate Table Accounts
57:03.0
57:03.0
OnPreExecute
Load Into Account
57:03.0
57:03.0
OnPostExecute
Load Into Account
57:03.0
57:03.0
OnPostExecute
Account
57:03.0
57:03.0
OnPreExecute
UserName
57:03.0
57:03.0
OnPreExecute
Truncate Table User Name
57:03.0
57:03.0
OnPostExecute
Truncate Table User Name
57:03.0
57:03.0
OnPreExecute
Load Into UserName
57:02.0
57:02.0
PackageStart
SSIS_LoadCheck_CoreManGroup
Beginning of package execution.
57:02.0
57:02.0
OnPreExecute
SSIS_LoadCheck_CoreManGroup
57:02.0
57:02.0
OnPreExecute
CoA
57:02.0
57:02.0
OnPreExecute
Truncate Table CoA
57:02.0
57:02.0
OnPostExecute
Truncate Table CoA
57:02.0
57:02.0
OnPreExecute
Load Into CoA
57:02.0
57:02.0
OnPostExecute
Load Into CoA
57:02.0
57:02.0
OnPostExecute
CoA
57:02.0
57:02.0
OnPreExecute
Entity
57:02.0
57:02.0
OnPreExecute
Truncate Table Entity
57:02.0
57:02.0
OnPostExecute
Truncate Table Entity
57:02.0
57:02.0
OnPreExecute
Load Into EntityMessage
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:28:32 Error: 2014-07-22
15:28:36.86 Code: 0xC020201B Source: Load Into Project OLE DB Destination [62] Description: The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero.
22 15:28:36.86 Code: 0xC004700C Source: Load Into Project 22 15:28:36.87 Code: 0xC0024107 Source: Load Into Project Description: There were errors during task validation. End
Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:28:32 Finished: 15:28:36 Elapsed: 4.39 seconds. The package execution failed. The step failed.
Hi MustafaH,
According to the error message(hightlight above), it seems it's a mapping issue that Naarasimha point out in the post above. Please check this carefully.
An OLE DB destination includes mappings between input columns and columns in the destination data source. You do not have to map input columns to all destination columns, but depending on the properties of the destination columns, errors can occur if
no input columns are mapped to the destination columns.
Reference form: http://msdn.microsoft.com/en-us/library/ms141237.aspx
In your post, you said that it is in SSIS 2008 and being deployed on SQL 2012 server. Do you mean that you create the package deployment utility by using SSIS 2008, and then implement SSIS deployment in SSIS 2012 environment? If so, you need to
convert the project to package deployment model to generate Manifest file in SSIS 2012. Please see:
Use the SQL Server 2008 version of Business Intelligence Development Studio to develop and maintain packages that are based on SQL Server 2008 Integration Services (SSIS)
Use SQL Server Data Tools - Business Intelligence for Visual Studio 2012 to develop and maintain packages that are based on SQL Server 2012 Integration Services (SSIS).
For more information, please see:
Interoperability and Coexistence (Integration Services):
http://msdn.microsoft.com/en-us/library/bb522577.aspx?ppud=4
If you have any feedback on our support, please click
here.
Elvis Long
TechNet Community Support -
Conditional Spry Confirm Validation
Hi Chaps,
I know there are a few of these threads about, however, the answers usually point to a 404 webpage.
I'm after a conditional Spry Confirm Validation Text Field.
E.G. if a user decides to change a password, the (required) confirm validation comes into effect.
If anyone can point me in the right direction, it would help me out.
Many thanks
Samuelnever mind, found this: http://forums.adobe.com/message/2983481#2983481#2983481
-
ALC-LCM-120-207 JMS settings failed validation
during install, got error at the step "Application Server Configuration Validation" step:
JMS settings failed validation
Failed to validate queue connection factory QueueConnectionFactory
any suggestions on how to get this fixed would be much appreciated.
there was no error whatsoever before this step.
the platform is: Windows 2003, WebSphere, SQL Server.
thanksJasmin, thanks for response.
WAS version is:
IBM WebSphere Application Server, 6.1.0.5
Build Number: cf50652.12
Build Date: 12/28/06
java -version returns "1.5.0".
not a cluster.
As far as I know, LC ES has not been installed on it before.
After I got the error, I checked the QueueConnectionFactory (using WebSphere console) by following the ES install guide's "Manual Configuring WebSphere" chapter. The only thing that didn't match on that screen was that nothing was set in the "XA recovery authentication alias" dropdown.
What to do next? -
JAAS between WLS (untrusted) domains - ServerIdentity failed validation
I'm trying to create a proxy/delegate class that can be used by clients to
transparently access a server.
The class should be usable from clients within WLS containers and from
regular java apps.
Using JNDI authentication everything works fine.
Using JAAS I'm having a problem when my client is a EJB app in an untrusted
WLS domain. When the login is requested the following error is occuring:
<ServerIdentity failed validation, downgrading to anonymous.>
I want to be able to do a JAAS login to a non-trusted domain. I'm assuming
that the server is trying to pass the subject who is logged into the current
container, and my call to LoginContext.login()
Any thoughts?
//Example of code
loginContext = new LoginContext("ServiceSecurity", new
FW_SimpleCallbackHandler(pUser, pPassword, pUrl));
loginContext.login();
Subject subject = loginContext.getSubject();
serviceHome = (ServiceHome)weblogic.security.Security.runAs( subject,
new PrivilegedExceptionAction() {
public Object run() throws Exception{
//JNDI lookup
//Create session bean instance
weblogic.security.Security.runAs( subject,
new PrivilegedExceptionAction() {
public Object run() throws Exception{
//do operation on instanceThen I'd start talking to BEA support to see if they even know how to do
this.
Without the trust relationship I'm not sure if you can achieve what you
want.
Dejan
Mark Fine wrote:
This is exactly what I am doing.
Implicitly there is a security context within the session bean (the user
logs in via the web app and context is propagated). I obtain a LoginContext
to the other server and call the method within that context.
It doesn't work because it is implicitly passing the security context of the
session bean and failing due to lack of trust.
//Example of code
loginContext = new LoginContext("ServiceSecurity", new
FW_SimpleCallbackHandler(pUser, pPassword, pUrl));
loginContext.login();
Subject subject = loginContext.getSubject();
serviceHome = (ServiceHome)weblogic.security.Security.runAs( subject,
new PrivilegedExceptionAction() {
public Object run() throws Exception{
//JNDI lookup
//Create session bean instance
weblogic.security.Security.runAs( subject,
new PrivilegedExceptionAction() {
public Object run() throws Exception{
//do operation on instance
"Deyan D. Bektchiev" <[email protected]> wrote in message
news:[email protected]...
In that case you should be able to get the two different Subjects from
the two different domains (return a different url from the URLCallback
when you login with JAAS), and afterwards use
weblogic.security.Security.doAs(...);
with the correct Subject for the appropriate server when you access the
servers.
HTH,
--dejan
Mark Fine wrote:
Thanks, but i think the content was miscommunicated. Everything works
fine
when the domains are "trusted". I want to know how to have "untrusted"
domains talk to each other through explicit logins.
ie. imagine an application on a domain in a finance department. What if
they are trusted against other domains and can't / don't want to
establish
trust with your domain. They just need access to one particular service
you
expose.
Thanks,
m
"Deyan D. Bektchiev" <[email protected]> wrote in message
news:[email protected]...
Hi Mark,
You should first establish a trust relationship between your Weblogic
servers:
http://e-docs.bea.com/wls/docs70/secmanage/domain.html#1171534
Then you can use JAAS to authenticate and get valid Subjects for the two
users.
--dejan
Mark Fine wrote:
I'm trying to create a proxy/delegate class that can be used by clients
to
transparently access a server.
The class should be usable from clients within WLS containers and from
regular java apps.
Using JNDI authentication everything works fine.
Using JAAS I'm having a problem when my client is a EJB app in an
untrusted
WLS domain. When the login is requested the following error is
occuring:
<ServerIdentity failed validation, downgrading to anonymous.>
I want to be able to do a JAAS login to a non-trusted domain. I'm
assuming
that the server is trying to pass the subject who is logged into the
current
container, and my call to LoginContext.login()
Any thoughts?
//Example of code
loginContext = new LoginContext("ServiceSecurity", new
FW_SimpleCallbackHandler(pUser, pPassword, pUrl));
loginContext.login();
Subject subject = loginContext.getSubject();
serviceHome = (ServiceHome)weblogic.security.Security.runAs( subject,
new PrivilegedExceptionAction() {
public Object run() throws Exception{
//JNDI lookup
//Create session bean instance
weblogic.security.Security.runAs( subject,
new PrivilegedExceptionAction() {
public Object run() throws Exception{
//do operation on instance
Maybe you are looking for
-
Only browsers allowed at my site.
i want to create a filter which should check whether request is from browser or not, if yes then only allow. so i am checking for header User-Agent i want to know what can be possible values of User-Agent are for different browsers of different versi
-
Problem installing RAM (flashing power light, etc.)
Hi everyone. I have been spending the last 2 hours trying to install this OCX Ram (2x1GB) into my PowerMac G5 Dual 2.5. Before installation, I just had the 2x512 Apple memory. After installing the RAM following instructions from Apple's website, I tu
-
How can I remove all content between two tags using Find/Replace regular expressions?
This one is driving me bonkers... I'm relatively new to regular expressions, but I'm trying to get Dreamweaver to remove all content between two tags in an XML document. For example, let's say I have the following XML: <custom> <![CDATA[<p>Some tex
-
Why doesn't siri work away from home
why doesn't siri work way from home
-
SOBJ current setting (oss note 135028, 77430)
Hi all, I'm working in a ECC6 R/3 system. In according with sap notes 135028 and 77430 I would modify standard current setting for some views used in customizing transaction. Reading note 135028 I follow the indicated solution : "...open the IMG and