Spry files not linked anymore.

Hello.
I've recently put together a site in Dreamweaver. I've also transferred my site files to a new computer where I would like to have as the PC I will be doing the rest of the maintaining of the site. However, after transferring all files and importing my .ste file, my spry menu bar is not working. I feel that the "targeting" of the spry files is not right. Is there any way to re-link the menu to those spry files through the file browser or in the code itself?
I've also noticed that my site has a remote folder for some reason and this folder is where the spry files were located on the old PC. I feel this also could be causing problems as the folder it is in does not exist on the new PC. So any help would be appreciated. I would like to get rid of that remote folder and have my spry assets folder in my root folder and have the files targeted correctly. I would like very much to not have to remake the spry menu bar.
Thanks for any help.

If you have transferred the files to newly named directories, there are two possiblities to rectify the linking issues.
Rename the new directories (folders) to what they were in the old situation or
Use Dreamweaver to find and replace the link to the new location.
I hope this helps.
Ben

Similar Messages

  • Pdf file not linking to email

    My pdf file will not link to my email,saying its noy supported

    Hello, can you please provide us with the solution/ coding? Regards, Otto

  • Some files not showing anymore in folders on smb-share (lc_ctype error)

    I use a shared folder on my iMac for my work projects.
    After the upgrade to Mavericks, I noticed that Dreamweaver CS 6 did not show all files and folders anymore in several projects.
    This is on a Windows 7 machine.
    The same thing happens when in FileZilla, so it's not a specific Dreamweaver issue.
    When I go to a troubled folder in FileZilla I get this error (in Dutch):
    "Een lokale bestandsnaam kon niet gedecodeerd worden. Zorg ervoor dat de LC_CTYPE (of LC_ALL)-omgevingsvariable juist is ingesteld. Totdat u het probleem oplost, kunnen er bestanden ontbreken in de bestandslijsten. Er zal geen waarschuwing meer getoond worden gedurende deze sessie."
    Translation:
    "A local file could not be decoded. Ensure that the LC_CTYPE (or LC_ALL) environment variable is set. Until you solve the problem, you are missing files in the file list. There will be no warning displayed during this session properly."
    When I go to thew same folder in Windows Explorer all files are shown.
    When I use Dreamweaver CS6 on the iMac no errors occur and every file just shows fine.
    It seems it only occurs in random directories of the local files of website projects I maintain with Dreamweaver
    If anyone ones how to fix this, I would realy REALY appreciate this.
    This totaly kills my workflow.

    Pages documents compatible with Windows Shares, because they are by default, written as single-file, compressed folders with .pages extension:
    Pages ’09
    Pages v5.5.1
    Pages documents incompatible with Windows Shares, because they are written as uncompressed packages (folders). These need to be explicitly compressed (e.g. foo.pages.zip) by the user before deposited on Windows shares. (Right-click menu on Mac file icon)
    Any Pages v5 document by default (or Pages v5.5.1 where optionally written as a Package file type)
    Pages ’08, and Pages ’09 optionally saved as packages (folders)

  • Project files not linking

    Hi,
    I needed to go back to a project I left last summer, 10 different videos on a specific topic, and to my shock, the project files aren´t showing up in Final Cut. The original files / Event files seem to be all there and I have saved master files of the movies I made, but some were only saved at 480.
    Searching the hard drive, I´m pretty sure I can see them - if they are the Render Files / High Quality Media etc...? But they´re in the Movie folder, not in FCX projects and they´re not linking to the Project Library in the editing software.
    The reason for this I can think of, is that I possibly edited them in the Trial version of FCX, and now have installed the full upgrade. Or, I could simply have moved them over when I didn´t understand how it all worked (and still don´t ;-) and the link has been lost.
    I assume I should just be able to transfer them in to the Project folder in Final Cut Pro...?
    If it´s something to do with the Trial version - I seem to not have deleted it yet - should I start with deleting it or could that do further damage (can´t see what help it´s doing now anyway!)
    I´m petrified of losing the files completely as I´m not very savvy with how the data links between files and project etc, any advice warmly welcome!!
    I can send screen capture of file extensions etc if that helps clarify what files they are and how they should be linked back.
    Thanks!

    If your project files aren't being seen by the app, it's likely that they were moved.
    If located on the start-up drive, they should be in Movies>Final Cut Projects>your project. Otherwise FCP won't see them. The actual project file is named CurrentVersion.fcp.
    On a non-start-up drive, the Final Cut Projects folder needs to be at the root level for FCP to see it.
    The same thing goes for the Final Cut Events folder.
    So check those folders to make sure they're in the right places on your system.
    Russ

  • MFX Files not linking issues in the sequence using Premiere CC Pro

    We are using Panasonic P-2 cards and the Infocus to capture video as MFX files. This creates a series of  files which are linked via an XML file. In Premiere 6 and earlier, these files were linked (approx. 2 min. of video each) as one stream - only one of the files were necessary to use within the program. Using Premiere CC, this feature does not seem to work as before. Are we missing something in the settings, or does this version not support MFX files as before?

    It's not normal on Windows.

  • Why are my mjpg files not streaming anymore going from version 36 to 37?

    The video streams from my axis cameras on version 36 but on version 37 it gives a still image. When i refresh the page it returns the image as it was when i refreshed it but it does not stream anymore. I have updated all the plugins and if i downgrade to version 36 it works again.

    Start your '''Computer''' in safe mode with networking. Then start Firefox.
    Try '''Safe''' web sites. Is the problem still there?
    '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''

  • QTVR files not tumbling anymore w/ QT 7.1 standalone

    I am still seing this problem with the latest player (7.1.5). Anyone encoutering the same problem - or even able to play any QTVR with the standalone player?
    I have some QTVR files generated from a 3D app that won't tumble anymore w/ QT 7.1 standalone, however they do if I drag the file onto Internet Explorer. Bummer!
    Here is a small 1Mb example file > http://www.damienf.ch/images/legocarQTVR_small.mov. Save it locally and try.
    Or is there a hidden feature to make this work?
    thks.

    Thanks for solving my problem; the link you gave me solved my problems. Somehow the "enable plug-ins" box in the security pane of my Safari preferences had been unchecked. I don't know how this happened, I certainly didn't do it. Perhaps in all the reinstalling (inc. OS 10.4.9 Combo), the box was not checked and I didn't look at my Safari prefs after I reinstalled.
    Well, as usual, the answer was something simple. Thanks again.

  • Contribute and files not linked to

    I'm preparing a site using DW8 and Contribute 3.11 which has
    an .shtml page which incorporates a server-side included file
    (another html page).
    How does Contribute find this page to allow the user to edit
    it? Do they just type in the address?
    Presumably this kind of ssi issue is not a problem in the
    same way as others might be?

    Thanks Hillary,
    That's very helpful. Other people warned me that editing
    files without a 'head' was a problem in Contribute.
    The non-linked stylesheet is not a problem to me as it's
    purely text that's being edited (if it was, I guess I could use a
    design-time stylesheet), though I note the downside that the
    include files are completely editable by users. The only way to get
    around this would be to use a separate cms system which would then
    obviate using Contribute in the first place.
    To me the problem with Contribute is that it's an
    exclusive approach - you narrow down what people can edit
    from everything to whatever they can. Other CMS systems (the
    simpler ones at least) insert tags to say what you can edit. That
    seems a much simpler procedure.
    I think the way ahead is to use hosted CMS systems - so I've
    dropped Contribute. I never was keen on something that had to be
    installed on a client's computer anyway.
    Thanks for your advice.

  • .3gp files not playing anymore

    I have two macs. One is a g4 duel with quicktime 7.0.1. I have been through all the problems with moving up and down versions with this computer. I also have an older g4. Both are running os 10.4.3. The older G4 has never had a problem with playing the .3gp files. The Dual use to play them but does not anymore. Quicktime will play the sound but not the picture.
    Is there a quick fix for this problem

    Ok, so I think you're going to want the stand alone projector if you want to be able to open the swf by double clicking.  Just installing Flash Player will get you the plugin/active x control, but they won't be helpful unless you are viewing the swf's in a web browser.
    Download the Windows Flash Player 11.2 Projector

  • Firefox won't open files (not links) in new tabs

    Hello I'm having an issue with Firefox on my Mac Mini. I want to view html files I've edited in multiple tabs in ONE window. My problem is that whenever I double-click an html file it always opens them in a new window even when I have an existing window open. I have tried changing settings in the about:config in firefox to no avail. Is there some kind of setting I need to change in Leopard to fix this? I'm new to the Mac and have been using Windows for a long time. I recently got this Mac Mini and love it, but I can't figure out this one problem. I'm running Mac OS X 10.5.3 with Firefox 3 RC2. Here's the thing, I'm also running FF3RC2 on WinXP SP2 on my other machine and it does not have this problem at all. Any ideas? Thanks in advance for any help you guys can provide.

    Can you download and launch Word files normally from other sites, such as: [http://download.microsoft.com/download/b/d/5/bd515214-0728-4a54-9625-ab3f198cf448/internetexplorer8.doc]
    If so, it could be an issue on the mail provider's server. If the mail server is sending a generic content type ("application/octet-stream"), then Firefox won't actually associate that with any particular application (I suspect because it also is used for executable files).
    Sometimes the Open/Save/Cancel dialog will show you the "content type" indicated by the server. Is that information available?
    Is this a mail provider that would accept some constructive input on this issue?

  • Files not linking correctly

    So kind of a weird issue. I have a folder called "Project" inside that folder is the indesign file then a "links" folder that contatins jpgs/eps etc...
    Now when I decided to copy the entire "Project" folder to the desktop then opened the indesign file in there... for some reason all the links were still pointing to the orginal version instead of the files links in the duplicated version. On co workers computer this isnt' happening but mine it is? Anyone have a clue what's going on here??? Any help wold be awesome!!!

    I think you all have missed the point here.
    Sure, you can relink to folder, or you can package and have ID rewrite the links to the package folder, but that has nothing to do with HOW links work. If you COPY a .indd file to a new folder it keeps the same links, so neither of those suggestions will make any difference on the same machine UNLESS the link paths EMBEDDED in the file cannot be found.
    Packaging works for MOVING a project to a new location because it takes the links along, and since the old locations are no longer accessible ID starts to look for them in the current directory. Relink to folder would only work if the the relinked folder also happened to be in the same directory as the ID file, and the two are moved together (essentially doing an artificial "package"). As long as ID is able to see links in the original locations, it will use them. On the same machine, either option can be used to create a copy with new link locations (and package is easier), but if you copy the folder again to another location on the same machine you just recreate the problem.

  • Nikon D2X NEF Raw file not recognized anymore...??

    Strange happenings...
    My projects which contain new and older .NEF friles from the nikon D2X are no longer readable by Aperture - What gives?
    I had been able to work them before, but not now... Haven;t used AA in a few weeks so not sure if the 10.4.5 update or some other component has gotten in the way or what... All software is up to date so if anyone has any clues, please feel free to let me know!
    Cheers,
    G.
    Quad G5   Mac OS X (10.4.5)  

    Even Stranger...
    The problem appears to be gone...!
    I loaded some new NEF test files to determine if the naming or IPTC info was potentially the problem - and it worked fine.
    Then, I went to the libraries that were problematic yesterday, and I watched as unreadable grey squares, one by one, became visible and active again... Bizarre.
    The machine wasn't even restarted ( it did have an overnite nap though...), the only thing that happened was that Aperture was shut down yesterday, and then reopened today, which I'm reasonably certain that I did yesterday as well.
    I was going to run a permissions repair, but didn't need to, so that wasn;t it... I guess the program still has some instability that opening / closing seems to eventually address.
    Solved? Not really, but working for now I guess...
    Thanks for the input
    Craig
    Quad G5 2.5 GHz 4GB RAM   Mac OS X (10.4.5)  

  • CS6 Audition file not linked with Premiere Project

    I'm a newb to Audtion and I'm using CS6 Master Suite on a Windows 7 machine. 
    When in Premiere and I  "Edit in Audtition" , then "Save" my edit in Audition the new (edited) audio is not reflected in the Premiere project. Instead I find it in a folder called  "Adobe Audition Interchange". Shouldn't it automatically replace the Audio file in the Premiere project it originated from?
    Is there a setting I'm missing in Audition? Should I be saving the File somewhere else?
    When I've worked with Soundbooth in earlier versions of Premiere the edited version was immediately inserted into the Premiere Project.
    Thanks for any input

    Hank
    Please try this conventional route from the Elements Organizer 11 Slideshow Editor slideshow to opening that slideshow in Premiere Elements 11 project.
    In the Elements Organizer 11 Slideshow Editor, go to Output and select Edit with Premiere Elements Editor. That command will put the slideshow in a video format on the Timeline (.psess file) and at the same time put a folder with the project assets as well as a copy of the .psess in Project Assets.
    If you need to do additional edits of the .psess (video) on the Timeline, then you right click the Timeline .psess file, and select Break Apart Elements Organizer Slideshow to do just that.
    If the slideshow opens in Premiere Elements 11 Editor with black borders, then you set the Premiere Elements project preset beforehand manually (File Menu/New/Project) and then Output the slideshow from the Elements Organizer slideshow editor.
    Have you been there and done that? If not, please give it a try and let us know the outcome.
    Thanks.
    ATR

  • Windows Audio Video files not accepted anymore?

    For 6 years I've been saving videos in WAV format. Today I tried to combine two finished WAV files into a single video and once imported to APE4 half the clips are black.??? The finished video is half black. What gives. Doesn't APE work with WAV files anumore?
    Bruce

    This is the ANNOUNCEMENT:
    ANNOUNCEMENT: Windows Update Causes Half of Display to Be Blacked Out
    Hide Details
    MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
    "MS bulliten MS13-057.  Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
    For us, it occurs when decoding WMV9 files.  Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
    You can uninstall these windows updates to resolve your problem."
    There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
    Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml

  • Proxy files not linking in server

    Couple issues going on here. I added a final cut pro project to the server yesterday and the Server began compressing all the files. After thumbnails and poster frames, I am only doing edit proxies currently because I need them sooner. I saw the compressions going in the batch monitors so I let it rul over night. The next day, after 14 hours of compressing, the files began failing, most due to Quicktime Error -50 (whatever that is). I looked on the server and noticed that a lot of the files never created thumbnails and none had Edit Proxies. I opened the Edit Proxy package and searched for the files and found the edit proxies manually, but things just are linking back to Final Cut server. Anyone see this before?

    Try processing the problematic files manually in Compressor and see if they fail there too.
    Check your disk space and permissions.

Maybe you are looking for

  • Having Trouble playing music

    I downloaded an album last night from iTunes. All 14 songs play fine in iTunes. I loaded the songs on my iPod, and they all work except for two of them. Those two I can select and they show up and everything, but will not go beyond 0:00 (the beginnin

  • Pls. help, SQL script page problem

    Hi, Im using the Hands On Oracle Database 10g Express Edition for Linux. Im in chap06 already p. 218. I just uploaded the SYSMGMT1 script. After that I Clicked the script's icon but I cannot see any SQL DDL commands inside. Nothing happened. It said

  • Kdenlive fail rendering if title clips or images are in the project

    Hi. Thats what happen if I try to render a project with title clips or images inserted, whatever is the output that I choose. If I hide title clips and images, the project renders I get a popup that says Rendering of /home/pathtooutputfile aborted, r

  • Tecra A9 and BIOS update - No sound with Win 7

    Hi, I installed Windows 7 of an Tecra A9 Laptop and everything works fine except the sound. The sound card driver for Windows 7 is already installed. The Speakers as well as the microphone is detected. While playing music, under sound devices the gre

  • Decimal Place settings for  'Total' field in Marketing documents.

    Dear sir, I'm Using SAP B1 2005B Patch Level 5 I want to know which Decimal places setting i have to set for'Total' Field in all Marketing documents.I want to know whether it come's under Prices settings or Amounts setting.