Spry Horizontal menu works locally but not online.

Hi people I built a site in Dreamwever CS5.5 and used a spry widget menu. It works great in firefox when I run it locally, but when I try to access a page from the online server it's rubbish. I've uploaded all of the JS files a couple of times and even copied some to multiple locations but still no joy. Any advice would be appreciated, the website is to promote a very noble cause. website is www.stopthetoad.com.au

Hi Gramps,
Thanks for your help, from the look of the previous posts on this forum
you may need to change your name to Altruistic Guru.
This is actually a site that my 14 years old daughter (Jessica) has put
together and I'm very proud of her for the effort that she is giving in
her own time without possibility of reward (other than having our native
species survive another generation).
Any further advice you can offer will go a long way towards getting
those feral toads out of our country.
We've upload all files via cuteftp, Dreamweaver and even manually 1 file
at a time!
But it still wont work. When we try to load a page we get a series of
messages such as
    SpryMenu.js requires SpryWidget.js
    SpryMenuBarKeyNavigationPlugin.js requires SpryMenu.js!
All of the files that the messages refer to have been uploaded several
times but we still get the messages.
The spry Ui-1.7 folder with all relevanr folders/files is in my
public_html folder on the server. Should I move all of the Spry folders
contents into the public_html folder or somewhere else?
I expected Dreamweaver to do all of this for her perfectly, we must have
gone wrong somewhere.
This is a screenshot of the cuteftp screen showing all of the files in
the public_html folder. You'll notice that I've copied some spry files
into this folder also (will this cause problems)
Kind regards,
David
(on behalf of Jessica)

Similar Messages

  • Flash site works locally but not online (uploaded to server)

    We have bought a flash portfolio template and have customized it with our pictures, video, etc.
    When we test it locally on our computer (using different web browsers) it all works perfectly well. We have uploaded the finished website to our server and when you go to the address online, it doesn't work (a loader progress shows but it is stopped and nothing happens).
    We have however uploaded the original template we bought and it works perfectly online.
    The template consists of and index.html, various .swf, and various .xml that we have modified according to the template instructions (it also contains a java script folder we haven't touched).
    What is it wrong with our modified template - it works locally without problem…!
    Thanks for your help

    When a Flash file works locally but not on-line, it's almost always a pathing issue (provided you did upload ALL files and do not have something missing... as suggested by Ned).
    A "pathing issue" results when the main .swf cannot find one or more of the associated Flash files...like an xml file or images.
    It can be something as simple as using switching file names to all lower case. Local machine is not case sensative... most servers are. So "My Photo.JPG" is not the same as "my_photo.jpg". When naming files, best to use all lower case, no spaces in any file or folder names... use_underscore_instead.
    But the most common cause is that those associated files (xml, images, etc.) are not pathed relative to the Web page where the main .swf is embedded. Pathing to the .xml and image files should be as though the .swf was located in the same folder as the Web page... NOT the actual location of the .swf file.
    And that includes paths to the xml file and paths to image files coded into those xml files. Everything need to be coded relative to the Web page.
    This topic has been covered a number of times here:
    http://forums.adobe.com/message/4368273#4368273
    http://forums.adobe.com/message/4294529#4294529
    http://forums.adobe.com/message/4280086#4280086
    http://forums.adobe.com/message/4267408#4267408
    Best wishes,
    Adninjastrator

  • Shared Object working locally but not online

    My game records your high score using the sharedobject and while testing it locally it works fine, but when the swf is published and played online, it is not recording the hi score. Is there some sort of new security issue with saving shared objects on people's hard drives now?

    In Frame 1 I have this code. The first is for game progress, the second is for the high score which is then passed to the text object
    var Progress:SharedObject = SharedObject.getLocal("progress", "/");
    var OwlHiScore:SharedObject = SharedObject.getLocal("owlhiscore", "/");
    hisc.mainScore.text = (OwlHiScore.data.HiScore).toString();
    Then on the last frame where the game is over I have this code:
    if (score > OwlHiScore.data.HiScore) {
              hiScoreWon = true;
      OwlHiScore.data.HiScore = score;
      OwlHiScore.flush();
              hiScoreHolder.hiScoreEffect.mainScore.text = (OwlHiScore.data.HiScore).toString();
    } else {
              hiScoreWon = false;

  • Flash works locally, but not online!...

    I put a .SWF on a blank web page. It launches and plays fine
    locally if I launch the page from my hard drive, but online I just
    get a blank white page. Here's the link:
    http://al-i.anixter.com/TEMP/flashTemplate/index.html
    Any ideas?! Thanks!...

    Just realized if you right-click on the page and click
    "forward", it advances and works. I'd think it was something in the
    preloader code, but maybe not, because if the preloader was messed
    up, then I'd think it wouldn't work locally either, right?...
    UPDATED:
    Nevermind - figured it out! Stupid coding error in the
    preloader!!!

  • Spry Image Slideshow works locally but not live!?!?

    I am new to the whole website creation. I used the Spry Image Slideshow widget from the widget browser and everything works perfectly when I tested it locally. However, once i uploaded to the server and tested the links I get errors stating that it cannot locate the .js files. Like stated, I am very much new to this and have no idea how to fix this problem. Has anyone else ran into this or know of a solution?
    My website address is www.terranceperdue-architecture.com and the links in question are on the portfolio link.
    So more specifically:
    http://www.terranceperdue-architecture.com/Design%20Studio%201.html
    Any help would be greatly appreciated as I am hoping to use this website to gain an internship for the summer. But if it is not working then that is not an option.
    Thanks for any and all insight.
    -Terrance

    I see where you have posted that you got your slideshow to work, but I do not see any of the reponses on how you did it. I am having the same problem when I test my slideshow locally on dreamweaver it works, but it does not work when I upload it to the internet. It doesn't give me any error, but all it does is show me a black box with a spinning play button like it is trying to load. It doesn't do anything else. I have tried looking at IE, Safari, and Firefox and I get the same thing on all of them.
    Thanks,
    Christin

  • LoadMovie works locally, but not online...

    I have the following command on a frame:
    holder_mc.loadMovie("/NF/mp3player.swf");
    When independently launching the .SWF, or when testing the
    movie in Flash, the "holder_mc" loads the "mp3player.swf" just
    fine. But when posted online (or even testing locally inside a
    browser), it doesn't load at all. I have copied the directory
    structures from my local hard drive to my online server EXACTLY...
    Any ideas???...

    DIY_Lobotomy wrote:
    >
    quote:
    Originally posted by:
    Newsgroup User
    > This however will make it impossible to test locally,
    unless in shtml in
    > browser due
    > to the changes in path. You must mind these things while
    design movie, once
    > keeping
    > html and swf separately.
    >
    > I don't understand the statement above...
    Sorry, I can't explain it any better. Perhaps someone else
    will be able to
    help you.
    > This is the link to the page where I'm having a problem:
    >
    >
    http://www.shootingblanks.net/2media.shtml
    >
    > On that page (underneath the "Streaming Music" section)
    is the .swf. It is
    > coded on the webage to this path:
    >
    > audio/streamingAudio.swf
    >
    > Then, within that "streamingAudio.swf" is the following
    lines of actionscript
    > that happen when a button is pressed:
    >
    > holder_mc.loadMovie("WT/mp3player.swf");
    This is exactly what I'm telling you about. DO NOT USE PATHS
    from the perspective
    of flash file but the html file where the flash is. FLASH
    path is irrelevant
    here. It means nothing. IF the HTML is in the root of the
    server, the FLASH file
    thinks it is in the root of the server too so it will seek it
    files from that place
    not from its original location.
    You need to load your file using:
    audio/WT/mp3player.swf
    not
    WT/mp3player.swf

  • cffeed caching works locally but not on server

    So I got my new Hostek account set up (woohoo!) and I've started uploading some basic files so I can do thinks like validate my code and make sure everything's working.  One thing that does not work (but does locally) is my news feed caching.
    Pulling in two RSS feeds was seriously slowing down my index page loading, so I stole a trick from Ray Camden on caching the feeds.  It works perfectly on my dev machine at home, but doesn't work on my hosted account.
    Here's the exact code being used:
    <cfset feedurl = "http://velonews.competitor.com/feed">
    <cfset cacheTime = #createtimespan(1,0,0,0)#>
    <cfif not structKeyExists(application,"rsscache") or dateDiff("n", application.rsscache.created, now()) gt cacheTime>
        <cffeed source="#feedurl#" query="entries">
        <cfset application.rsscache = structNew()>
        <cfset application.rsscache.data = entries>
        <cfset application.rsscache.created = now()>
    </cfif>
    <ul>
    <cfloop query="#application.rsscache.data#" startrow="1" endrow="6">
    <cfoutput><li><a href="#rsslink#">#title#</a></li></cfoutput>
    </cfloop>
    </ul>
    I tried wrapping a try/catch around the top section (above the <ul>) and still got nothing for an error message.  The page just stops being rendered at that first <ul>.
    I'm not sure why it works locally but not on the web server.  Any ideas?

    Miraculously, I got it working.
    I changed this:
    <cfloop query="#application.rsscache.data#" startrow="1" endrow="6">
    <cfoutput><li><a href="#rsslink#">#title#</a></li></cfoutput>
    </cfloop>
    To this:
    <cfoutput maxrows="6" query="application.rsscache.data">
    <li><a href="#rsslink#">#title#</a></li>
    </cfoutput>
    And bingo!  It worked. Perhaps it's an idiosyncrasy between CF9 and CF10.

  • [AS3] EventDispatcher works locally but not remotely

    Hi,
    I am very new to Action Script and have the following
    problem. I hope someone can point me in the right direction.
    I have a small video player app. I have added the FLVPlayback
    component to the stage and set some properties via action script
    (AS 3)
    I then instantiate a class to go and retrieve some XML,
    register an eventListener to wait for the XML to be loaded and once
    the event has fired, load the FLV file (just hard coded at the
    moment) into the FLVPlayback object.
    This works when testing in the Flash IDE but not when I
    publish the movie to my webserver. I have tried commenting out the
    player.load() and just adding a textfield and again this works
    locally but not when I publish to the webserver. I have included
    some code snippets below.
    Can anyone tell me where I am going wrong?
    Any pointers much appreciated.
    Thanks
    Martin

    Hi,
    I found the problem if anyone has the same issue. I was
    passing some FlashVars in incorrectly using the
    AC_RunActiveContent.js that comes with Flash. I have switched to
    swfobject and all is well.
    thanks

  • Swf works locally, but not on server

    I have an issue with an xml-driven swf file. It plays fine when I test the site locally, but not when it's uploaded to a server. Here is a link to the page. There are many posts on this and other forums describing the same problem, though I can't find the right solution. The only thing it has convinced me of, is that it is probably a pathing problem. I purchased the file online, and instead of one swf and one xml there are about ten of each to make it work. In addition to this there are about 40 .as files. (all this to make it "easier" to customize).  Since I plan to use this banner rotator on multiple pages, it will be very unconvenient to upload all these files for every page I make. I checked with support for this product, and was told I could make a flash directory, only duplicating the xml-files for each new page and linking the xml back to the swf-files. Otherwise the support answer was very short and unhelpful. I have renamed every path in the xmls so that it should be right. As I said, the file works locally, so I'm not sure what I am doing wrong.
    I have posted in adobe forums before, and I have alwas found helpful and kind responses.
    Thank you,
    Siri

    They're all uploaded to the server, it is also possible for me to dowload them from there. When i run the main swf file through flash player debugger, I get this message:
    Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: file:///Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/xml/abrMain.xml
              at com.sQrt121.utils::CustomLoader/configureLoader()
              at com.sQrt121.utils::CustomLoader()
              at com.sQrt121.utils::LoadJob/initJob()
              at com.sQrt121.utils::LoadJob()
              at com.sQrt121.utils::ContentLoader$/addJob()
              at AbrMain/init()
    So I guess it can't locate the xml folder (since it is not there), but I don't know how to change the path. I can change it in the xml, pointing to the swf, but how do I do it the other way?
    This is the main xml-file:
    <?xml version='1.0' encoding='UTF-8'?>
    <abrMain
              width                              = "300"
              height                              = "250"
              pauseOnOver                    = "off"
    >
              <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrcontent.swf"                                    xml = "xml/abrContent.xml"                                        config          = "xml/config.xml"/>
              <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrbuttonscolor.swf"                               xml = "xml/abrButtonsColor.xml"                                        config          = "xml/config.xml"/>
              <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrpreloadercircle.sw f"               xml = "xml/abrPreloaderCircle.xml"                              config          = "xml/config.xml"/>
              <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrpreloaderline.swf"                               xml = "xml/abrPreloaderLine.xml"                              config          = "xml/config.xml"/>
              <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrplaypause.swf"                               xml = "xml/abrPlayPause.xml"                                        config          = "xml/config.xml"/>
    </abrMain>
    the abrMain.xml tells the swf what files it shold use, and where to find them, but where do I tell the abrMain.swf to find the xml? Maybe this is an issue for product support instead, though they only answer short and cryptic.
    Murray *ACP* wrote:
    None of your SWF files are found in the location where the page's code places them.
    For example:
    <param name="movie" value="../../../flash/produkter/deploy/abrmain.swf" />
    Did you upload them?

  • Facetime works local but not long distance

    i have been using facetime for 2 years.  Last week (soon after upgrade 8.2)  my service became intermitant.  it works locally,  but long distances it is ringing but no one is answering...
    I am using airport extreme....so not sure if its extreme or something else causing this...

    chris,  thanks so much but i think it has to do with port somehow.
    since i am out of the us it works fine in where i am at,  but trying to get to the us in just rings off the hook and no one can pickup....so it gets a notification that the call is coming through but ends at that point.....and i am just pushing voice only not video.
    other people where i am at use facetime and are able to talk to people in the US...I have been doing so until 1 week ago,  when i downloaded 8.2   Thanks for your reply looking forward to understanding what else i can do......
    ps already installed firmware in extreme...but didn't solve the issue.

  • Flash Vidio plays locally, but not online - Help!

    I have a htm page that I have inserted a Flash Video. It
    plays locally, but not when I have it on the web. I get nothing -
    no skins, nothing. If I rt click, there are the settings for flash.
    I have the scripts in my scripts folder - double checked that. Can
    anyone see what I'm doing wrong?
    Here is the link.
    http://www.metuchen-edisonymca.org/video/test.htm

    "motomoto111" <[email protected]> wrote in
    message
    news:fmbc9v$l68$[email protected]..
    >I have a htm page that I have inserted a Flash Video. It
    plays locally, but
    >not
    > when I have it on the web. I get nothing - no skins,
    nothing. If I rt
    > click,
    > there are the settings for flash. I have the scripts in
    my scripts
    > folder -
    > double checked that. Can anyone see what I'm doing
    wrong?
    >
    > Here is the link.
    >
    >
    http://www.metuchen-edisonymca.org/video/test.htm
    Make sure your server is configured to serve .flv files. Ask
    your host if
    there is a mime type set up for that file extension.
    Al Sparber - PVII
    http://www.projectseven.com
    Extending Dreamweaver - Nav Systems | Galleries | Widgets
    Authors: "42nd Street: Mastering the Art of CSS Design"

  • Applet working on local but not online

    my applet working on local machine fine
    but when i upload applet on my website
    and access by my machine only interface
    show and when i click the button of applet
    no result produce....
    thankx

    It is only possible if you missed something for code or codebase attribute of Applet tag, I mean values for these attributes are fine for your local machine but not with the server you are using.

  • Javascript working locally but not on sever

    Hello,
    Since this is a javascript question I'm ont sure this is the right forum, but since I've always had great help here I thought I'd give it ago, and for all i know , it is DW related...?
    So i have a website that's been online for years, which using a javascript scroller that i found online, a long while ago.
    Yesterday i made some site edits, that didn't (so far as I'm aware) involve messing with any of the javascript or links to external CSS or script files, but suddenly the scroller isn't working any more.
    Oddly though, it works locally in Live Design view, and in all browsers previewed locally too (usinag MAMP server)... but just not online.
    Why did it suddenly stop working?
    Here is al link to a stripped down version of teh problem, and i'd be grateful of any help anyone can offer:
    http://tinyurl.com/scrollernotworking
    Thanks so much in advance,
    Katrina

    Turns out the one-line code was definitely the issue. Now as to why it was being compressed in that way is beyond me.
    Here is a link to a follow up discussion regarding why my code was being minifed (still unsure at time of writing):
    http://forums.adobe.com/message/5401932#5401932

  • Azure SQL database working locally but not when published to Azure

    I have an
    AngularJS  solution that is connecting to a SQL Azure database.  When
    I run the solution locally, it’s configured to connect up to the SQL Azure database, the solution works fine. However,
    when I publish the solution to Azure the connection to the SQL Azure database does not work.
    When debugging with Chrome I get the error Failed to load resource: the server responded with a status of 500 (Internal Server
    Error) 
    I'm not using EF. but dapper.
    My connectionstring is as follows
    <add name="PortalConnection" providerName="System.Data.SqlClient" connectionString="Server=tcp:xxx.database.windows.net,1433;Database=xxx;User ID="xxx";Password="xxx";Trusted_Connection=False;Encrypt=True;Connection
    Timeout=30;"/>
    When I run the web solution locally from Visual Studio, my sql queries runs like it should, it's only the published version having problems. 
    Any ideas?
    Software Developer

    Hi,
    Thanks for answer.
    I had followed that step by step guide for deploying to Windows Azure. So that was not the problem.
    But I was able to get a better error message by turning off custom error in web.config.
    I got the error message: "Windows login are not supported in this version of SQL Server"
    I solved this by using the SqlConnectionStringBuilder instead of getting the connection string from 
    web.config.
    So everything works great now, just think it's strange it worked locally before..
    Regards
    -entery
    Software Developer

  • RSS Widget works locally but not on website

    I used the RSS widget to insert the following RSS feed:
    feed://www.bpkids.org/updates.xml
    I have also tried inserting with http:// instead of feed:// but no difference
    When I publish the site and check it on my local folder, it works. But when I post it to my website, it shows nothing.
    This is the first time I've used the RSS widget. It seems straight forward enought, however, I've read in these discussions that there was a bug with the RSS widget recently that was causing it not to work and wasn't sure if this is still a problem. Thanks

    That is a crossdomain issue because you have the site
    accessible via www or without.
    If you use
    http://www.sneeple.com/media_test/index.html
    to access that page it will work.
    Here's what to do to fix it:
    http://forums.flashgods.org/viewtopic.php?f=39&t=94

Maybe you are looking for