Spry in other software
Can I use the Spry framework in a web design program like
Frontpage?
Sure. You can make Spry pages in any editor you wish.
It's only HTML, CSS and javascript; however you want to
create that is up to you.
Thanks for writing.
Don
Similar Messages
-
How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.
If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck! -
Few 5DmkII RAW files do not open with Aperture, but OK with other software
Hi, I have two RAW files which I cannot import with Apple Aperture. The files open fine with Canon Digital Photo Professional, Raw Photo Processor and dcraw (and with various programs on my Windows 7 laptop) and I'm able to create TIFF files from the RAW files with every other software.
Detail about the files:
A. they are two first frames of burst (used auto bracketing, which takes 3 images in burst mode, to create HDR image)
B. there is nothing strange in the files, they are normal RAW files and file size is normal as well (other 28.4MB and 32.7MB)
C. both files process OK in above mentioned softwares and there are no blocks missing from created TIFF images, also preview JPG in the RAW file is OK
D. Mac OS X Quick view (press spacebar in Finder) and Preview do show these two RAW images well (I assume they use the embedded JPG image)
I have installed all the updates available in "Apple icon" -> "Software update..." function. Therefore I have Apple Aperture version 3.0.2. Computer is MacPro:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 12 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
How I can submit the files for Apple to create fix? I searched for Apple Aperture support but there is only this forum, no email address or anything. Do they read this forum?Some clarifications and answers to your questions:
First to Tony Gay:
I try the feedback later today even they claim "Please know that while we do read these submissions, we cannot guarantee a personalized response.", which is original reason why I'm why I wrote this question here. The url you provided did not work but this should:
http://www.apple.com/support/feedback
This is not relevant to sRAW files, I did not change the between camera taking automated bracketed shots the image format for 2 shots to sRAW and took 3rd with RAW, that is not even possible.
I have copied the images from card to hard drive, not trying to read from the card itself. However now you mention tried also from card = exactly same result. Tried desktop (different HD) and external USB and external eSata, all same result.
Get info doesn't show anything wierd for the images. All other 192 RAWs from same shoot were imported with exact same methodology (as well as 60000 images before that).
Then to gosuk2:
There is no HDR setting in camera, I took the images FOR HDR, but did not use any specific setting, just used 1 1/3 stop bracketing and 2 second times when camera automatically takes 1 1/3 underexposed, correct exposure and 1 1/3 overexposed image (the order of images can naturally be changed via custom function in camera). All this is unrelevant since I shoot quite often HDR with this method (=more than 500 images each month) this way and they have always been fine before these two images.
I see the files in import panel and I the don't use import dublicates setting so that doesn't affect the situation (why it would, Aperture things files are broken).
Again HDR cannot be combined in 5DmkII, it's just automatically shoot 3 bracketed shots.
No I don't get same result no matter what I do, it's just these two files. My other ~5000 HDR bracketed RAWs are importing fine as well as all burst/shots taken in continous shooting mode.
I'm very aware how stacking of images works, but I do not understand relevance to this issue. I can not import the images at all to Apple Aperture, after importing all images Aperture displays dialog saying that following files could not be imported to Aperture, then displays list with both of these files in the list and gives possibility to locate the files in Finder.
I have used Aperture since version 1 and I have 70000 images imported successfully to Aperture. Earlier I have seen this dialog "Aperture could not import image" only after hard drive/card failure. However then images cannot be used in Canon's DPP (Digital Photo Professional) or any other RAW software - now the problem ONLY EXISTS in Aperture all other RAW converters are able to open and process SUCCESSFULLY these images.
So I'm not whining that Aperture is not good, but if it starts to work only part of the images in future and I have to process rest of the images with Canon DPP (that program is really lousy on usability standpoint) then I'm not so happy with Aperture anymore.
Will report here if I get any comments back from Apple through the Feebback tool.
Message was edited by: vahonen (due to forum software replacing words like s u c k s etc. with ***)
Message was edited by: vahonen -
I have an old mpg video file, taken with a very early model "smart phone", that opens and plays fine in my newly "rebuilt" iPhoto library. I cannot open, edit it or share it with any other software. How can I fix it, to be able to do anything with it?
Detail:
I've recently purchaced a 4TB Thunderbolt drive to store my "vast" music and photo libraries. iPhoto had an issue reading the moved library, so I bought and used iPhoto Library Manager to "rebuild" it. Apart from much of the original data such as date taken & camera used etc, it appears to be working well. The aforementioned mpg video was taken some 9 years ago, using an early model "iMate" smart phone, and opens and plays fine on iPhoto, but I cannot open it with anything else, (I've tried iMovie, VLC players, Wondershare and Handbrake) nor can I share it. I just want to edit it, and share it with family.
Any help would be appreciated...No - not iMovie, VLC, Wondershare or Handbrake... Quick time starts with a "CONVERTING", then I get
I've looked at the "tell me more" links, tried downloading some of the movie players there. I'm begining to think the file is corrupt.
Thanks for getting back to me again though - appreciate it... -
Hello,
I'm using version 3.6.13
I'm on a Windows 7 platform
In Thunderbird or any other software that provides a hyperlink, clicking on the link will not activate Firefox if it's not running, or it won't open a new window if it is running.
I have disabled all addons, restarted, and it still doesn't work.
I have not installed any new devices, such as printers, for at least a year or more.
I use Avast for protection since I bought this PC
I do have Spybot resident.
I would provide a list of all my installed software, but I don't know how to get the list.
Thank you,
RobertI'm using FF 4.1 and TB 3.1.10 and am having the same problem.
-
How can I export an .PLT file from Illustrator without using any other software but Illustrator
I'm in the URGENT need of exporting a file to .PLT and no using any other software like the producer's software.
You can't. AI doesn't produce .PLT files.
-
my music is not on my ipod touch anymore but one of my other software called copytrans has my music backup so i got all of my music and videos back but they will not play in copytrans itunes or just my ipod touch itself please please help there???????????
there has to be a completley FREE software out on the whole internet downloads to fix my ipod touch musics completely free no money involved
please help me to fix this i jave all of my 6 thousand plus music with some videos back onto my ipod touch this happened to me this year well a week ago or two last year and also the years before to with or without any backups but i have my other software for that saved all of my stuff thank gosh but now nothings playing so i love itunes its the best but when it doesn't play or find my lots of songs makes me mad sometimes but anyways thanks for any or all the help you can to fix this problem
THANKS AGAIN:-):-)my music is not on my ipod touch anymore but one of my other software called copytrans has my music backup so i got all of my music and videos back but they will not play in copytrans itunes or just my ipod touch itself please please help there???????????
there has to be a completley FREE software out on the whole internet downloads to fix my ipod touch musics completely free no money involved
please help me to fix this i jave all of my 6 thousand plus music with some videos back onto my ipod touch this happened to me this year well a week ago or two last year and also the years before to with or without any backups but i have my other software for that saved all of my stuff thank gosh but now nothings playing so i love itunes its the best but when it doesn't play or find my lots of songs makes me mad sometimes but anyways thanks for any or all the help you can to fix this problem
THANKS AGAIN:-):-) -
SAP client and other software on a Virtual Machine
I'm the campus coordinator for a university that is a member of the University Alliances program. This gives us the ability to put the R/3 client and other software on lab machines and also distribute it to students.
Given that we deploy in a shared lab environment on a university campus we often don't have absolute control over things like browser versions, plugins available, security settings, Java version available, and so on. We also only have the ability to do updates, installations, etc. at fixed times of the year.
As a solution for this, we're contemplating creating a virtual machine to be able to control the environment more and also allow the student greater control and customization. At this point we'd be looking at developing a Windows VM, either Vista or XP, that would have the R/3 client, IE with all the correct plugins for running Visual Composer, NetWeaver Developer Studio, and other programs such as Solution Composer. The idea would be that if we need to add a new software resource, change a version, tweak the environment, etc. we could just update and redistribute this virtual machine.
Has anyone here attempted this type of deployment? As we are just beginning, any helpful hints or advice would be appreciated.I appreciate your willingness to think through this with me and share your expertise.
>
Markus Doehr wrote:
> Why do you think so? The "key" you use during installation is bound to a medium. We also have a license that allows us to fully automatically install Windows XP on our client PCs using Empirum and also install all other necessary software (IE updates, SAPGUI, Adobe SVG, Microsoft Office etc.)
My assumption was that if we had multiple windows instances out there all with the same key (assuming non-volume key) that the piracy protection built into the OS might in some way cause problems.
> (Perhaps not. We're still considering the ins and outs of that.) We're hesitant to put our campus volume license key on these VMs, since one could recover that key from the system and then it could become publicly available. Clearly that would be bad.
>
> That may be not a problem because those keys "usually" work only with the corresponding media - people would need to get their hands on a coorporate installation media to actually use it.
I'm not sure how challenging that in fact might be. A quick Google search turned up lots of sites that at least claim to have Windows volume keys and necessary install media. I know that college students can be very adept at things in that domain.
> The biggest problem you might face is the UUID of the client instances - they will be identical. If you plan to use Active Directory functionality (for e. g. Single Sign On) then you need to make sure each VM is different (speaking of running sysprep) and that you have a different user on each VM - which will be not easy to mantain.
If I'm understanding your thought correctly, the UUID issue is why I thought attempting 1 shared OS license key for all VMs would be problematic. My assumption is that having a unique OS key on each VM would solve this problem.
As far Active Directory goes, that likely won't be an issue. Our students have storage on the campus network, but we have no plans for the VM to access that. All our SAP resources are hosted remotely at a UCC. I envision the students being able to 'boot' their VM, connect to the UCC using the client software, do their SAP work, and be done. The only storage they'd have in the VM would be a drive in the VM. While this might not work in many deployments, given our use of this just for lab instruction, I think it would work well.
> Another point to consider is: How to update? If you update your main image (e. g. necessary SAPGUI patches) - how will you distribute that to the USB-VMs - or how will you make sure the students use the latest copy?
This is where our situation and a corporate situation likely differs. Since we are hosted by a UCC that caters just to the academic environment things tend to be build and frozen during the summer and then not changed until the next year. Our classes run each semester independently. Although we may have to roll out a different VM from one semester to the next, a mid-semester change shouldn't be needed. However, having said that, if we do need to install a patch, that should be much easier. In a lab shared environment updating a software version requires a lot of coordination. In this VM situation, each students has full administrator privilege over their VM. If they need to install a patch, they can do so. If they mess this up, they haven't disrupted anyone else. In that instance they could just download the base VM again as a 'reset.'
> In such an environment I'd more think about setting up a terminal server (using Windows 2003) and install all necessary software there. With that you only need to update at one place, you can granularily give permissions to the users and supporting users in case of a proble is easier (mirroring the session) than having single instances with all the same hostname of the client. And all students only need an RDP client which comes with the Windows XP or Vista by default.
That is something we haven't considered with this project, and I'll have to check with our system manager. Resources might be an issue here. We have an abundance of PCs, so each of them running their own VM isn't an issue. I'm not sure if we have a server capable of supporting 30-40 simultaneous remote connections that is not otherwise in use.
Thanks for your ideas here Markus. Any other thoughts, ideas, etc. are most welcome. I'll also update this thread as I start experimenting with this over the next couple of weeks. -
Somehow i've gotten into firefox and cannot get out. I cannot use my other software. I hate firefox and want to stop it. I want to be able to get to my word, my folders and TO STOP FIREFOX. I can no longer can put my cursor in the corner and have options come up even to play games. I hate this. I have windows 8.1 I want to get to other softwares ON MY AND I MEAN MY COMPUTER NOT FIREFOX'S.
i WANT TO UNINSTALL FIREFOX IF THAT IS WHAT IT TAKES.you can always Uninstall firefox.Simply Uninstalling should fix the problem.
Uninstall a desktop program
Swipe in from the right edge of the screen, and then tap Search.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Search.)
Enter control panel in the search box, and then tap or click Control Panel.
Under View by:, select Large Icons, and then tap or click Programs and features.
Tap or click the program, and then tap or click Uninstall.
Follow the instructions on the screen.
Thank you. -
Dowloaded After Effects and says its up to date but there is no trace of it being anywhere on my computer. All other Softwares are there, except that one. Can't re-dowload it. Help Please!
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 Do as Mylenium told you. If you don't know where it is. Go to www.adobe.com, sign in, search for the cc cleaner tool downloader and it should fix the issues. Have you went into your control panel, under programs and features and removed it from there?
-
Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.Uninstalling the iCloud control panel should allow you to do that folder deletion.
-
I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
H.264 video should be supported by your basic Snow Leopard operating system. The DVCPRO HD family of codecs is part of the Apple "Pro" codecs package which is normally installed as part of a "Pro" video editing suite installer or contemporaneously installed separately as part of one of the newer pro editing apps like FCPX. if you already have one of these pro suites or apps installed or available, then re-install the correct codec package that is missing. If not, you will need to purchase a Pro suite or app to be able to install the required codec package. -
I had a 'dead' iMac repaired and it needed a new HDD and graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I have no idea what this will be. can anybody help please?
<Personal Information Edited by Host>On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R -
Hi, I'm trying to install "Find my iphone" but it seems iphone 4.3 cannot do that. Any other software?
Find My Phone requires iCloud, which requires iOS 5.0 or higher. So, if you want to use Find My Phone, you need to update your phone. Follow the directions here:
http://support.apple.com/kb/HT4972 -
Can not open JPEG files and can not create JPEG files from other software
Can not open JPEG files and can not create JPEG files from other software (For example from Solidworks).
When I try to right click on a JPEG, a notice window appears written: "Windows Explorer has stopped working - Windows is
checking for a solution to the problem" and then the notice box disapears, the desktop appears and I can continue working.
From the other side - If I try to save as JPEG a screen of Solidworks (like a view of a part) the Solidworks falls but the JPEG
is created (I can see its name in the directory I created it).
I can open the JPEGS with the Paint software if I want but not with the Windows Photo Viewer.
I have the feeling that the Windows Photo Viewer disapeared from my computer - just a feeling.
I will appreciate your assistance.
Avi T. 2014Hi,
Did Windows Photo Viewer option appear when you right click the JPEG file and select open with?
I would like suggest you use Clean Boot to troubleshoot if there is third-party software conflict:
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support
Maybe you are looking for
-
How do you change the time on the all day setting in the iCal on an iPhone?
I updated to ios 7 and when I want to put an all day event in. When I set it for an alert, it will only allow it to go off at 9:00 am. How do I change the time of 9:00?
-
HT3702 I can't use my account to buy anything
The title is my main qustion, i feel realy realy bad cause i wanna buy some gem in a handsome game.
-
What is this Labview function block ? (-1 gain figure with red arrow on top)
Hello all, I came across this code which has a function with -1 gain figure with red arrow on top ? What is this function and where can I find it ? Thanks
-
HT1933 couldn't Play songs after purchased.
When I bought Set Fire to the Rain, I knew you were trouble, Paparazzi, and a few other songs it said on the receipt that the songs were purchased but I couldn't play them!
-
Ahh. I've scanned so many threads and I've only made my problem worse. I have always synced using iTunes on my Macbook Pro, and was running out of space, so I backed up my pictures and deleted them off my iPhone. Then I noticed I had lots of 'Other'