Spry not working in preview only blue non-styled text

When in Preview or Live View the Spry Menu only displays the links vertically with no CSS. I had added the Spry Nav earier and it had worked just fine but I erased it and all of its components to start again later and now I have this. BTW, I tried setting it up in a new blank page in the same site folder and I had the same result.

Thanks, Arnout. All the files were present but you are were right, they were obviously not linked to the correct location. I deleted the head and added the element again and poof all worked fine. Thanks for responding!
Blessings-

Similar Messages

Save as PDF not working - in Preview only

I am trying to password protect a PDF file so I can email it, and tried to use the "Save As PDF" option in File>Print (in Preview) so I could add a password in the Security Options window. However, when I do this, nothing seems to happen (the application kind of freezes for about 10 seconds or so, and then it's back to the same print screen). I tested out whether the Save as PDF option worked in other applications (Word, Excel, Safari) and it works fine. Only Preview seems to be a problem - which is an issue if I want to password protect docs that are already PDF. Any suggestions? I'm running on OSX 10.8.2 on a MBP from early 2011. Thanks in advance.

File > Export (check Encrypt)

Some PDFs not working in Preview. Mac created PDFS work but windows created PDFS dont

Some PDFs not working in Preview. I installed adobe reader and then deleted it because the software was aweful and PDFs have been haveing issues ever since. I can open up PDFs created on my Mac in preview just fine...
But when I try and open a PDF created on a windows computer it says:
"Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html.
For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. "
I am not sure why where the PDF was created would make a difference but couldnt help but notice that was the difference between the PDF files that work and the ones that give that message. I can view the PDFs on a windows computer just fine and never had issues untill adobe, it seems to have messed up PDFs on my Mac and I am so frustrated with them. I have searched my computer for any remaining adobe files, deleted them and restarted my computer but I am still getting this message.

Uninstall Adobe Reader's plug-in.
Remove the following two files from /Library/Internet Plug-Ins/:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Open Safari Preferences > Extensions. Do you see AdobePDFViewer? If yes. disable.
Log out/in and test.
Another option is to download and install this plugin. Schubert|it PDF Browser Plugin . PDF Browser Plugin 2 is free for not-for-profit activities if used at home or at educational institutions.
http://www.schubert-it.com/pluginpdf/

My youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome

my youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome. At times it also say QuickTime Player can't open "video.3gp". and
The file may be damaged or may not be a movie file that is compatible with QuickTime Player. when i try to open a video on youtube on safari

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

What should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

what should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

If there's a hardware defect and your phone is under warranty, bring it to Apple for replacement.

Iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore

In google chrome my keyboard does not work, but seemingly only on a particular website....any suggestions?

my keyboard does not work, but seemingly only on a particular website while using Chrome....any suggestions?
Using a MacBook OSX 10.9.2

does it work in other browsers? Also, what website? When did this start happening?

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
Any thoughts? The poor lady is very distress

If she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for 4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up.

AJAX Spry not working on a page

I recently upgraded to CS3 from MX and bought the Adobe
Training Source Book by Bardzell and Flynn. No problems until
chapter 9. I have attached XML data sets, Get Schema and built Spry
Tables literally dozens of times by modifying or starting
completely from scratch over the last few days with no luck at all.
I am able to preview the data in the Spry XML Data Set dialog
window, so it seems to be able to correctly read it, however, when
saved, uploaded to live server and viewed in browser, the page
contains only the HTML heading and the footer and no dynamic tables
or data whatsover.
I do not want to continue not understanding what is not
working properly and why. Any suggestions?
Thanks in advance.

Thank you for the response.
However, even after correcting the <h1
spry:detailregion="ds1"> it is still not working.
I am on Vista Ultimate and use IE, Opera, Maxthon and Firefox
browsers and have tested on all four.
No data shows up in DW design window. Just a small table
representing:
<table>
<tr>
<th spry:sort="countryName">Country Name</th>
<th spry:sort="region">Region</th>
</tr>
<tr spry:repeat="ds1" spry:setrow="ds1">
<td>{countryName}</td>
<td>{region}</td>
</tr>
</table>
With blue {countryName} {region} fields.
I am unsure about the xpath.js and SpryData.js files as I had
deleted the initial ones that were created on my first try in an
attempt to recreate them but upon subsequent attempts, the dialog
window that informs that the files were created did not appear
again upon recreation. I manually added them from the CD and
uploaded them. Can I force a recreation of these files? Can I test
these files to ensure that they are working properly? My remote
server is not as current as it could be: PHP 4.3.11, MySQL 3.23 on
Apache Tomcat 4, Linux ES 2.1 - Could that be an issue for any of
this?
Thanks again.

Forms built in Acrobat not working in Preview!?

I've built a form in Acrobat Professional (with text fields and radio buttons) that we want to fill out with Preview. The idea is to open the pdf with Preview, fill it out and in the Print dialogue, to "mail as pdf". Then if you close the original pdf without saving changes. it remains a template you can re-use anytime you wish.
This would all work fine except some of the text fields seem to radomly decide not to work when the pdf is opened with Preview. I've tried going back in Acrobat to delete the field and re-create another - that didn't work - same issue. I tried deleting the field, then copy and paste a field that does work in its place. Not only does that not work, it renders BOTH fields unusable!
Any ideas?

If the field works in Acrobat Reader but not Preview, then it's probably Preview's problem. Preview supports a subset of PDF features and an older version than the Adobe apps. From other similar questions seen in the forums, the best solution is to distribute a current, free Adobe Reader to everyone who needs to fill out the form.
Either that or get Apple to keep Preview reasonably full-featured and up-to-date, because today it is neither, and Adobe Reader 8 is nearly as fast or faster than Preview.

'show icon preview' not working, Icon preview no longer visible

I have lots of folders full of jpg files. The preview icon do longer appears and all i get is the genetic icon. This happened randomly yesterday and I don't know how to fix it. I have the 'Show Icon Preview' enabled yet I only get the generic icon. Any ideas why? (OS X 10.5.8). I have tried a restart, permissions fix, and reindexed my hard drive with spotlight. No luck. Please help!
Simply: I don't know how to get the preview back even after selecting the "show icon preview" box on the options. HELP!

There probably are some hidden probable causes for this behavior;
while not knowing if you perform any general maintenance in a
preventative way for your OS X system, some of the suggestions
I could provide here may mean little or nothing to some users, or
to others, who have done them for years as a matter of course, to
suggest those could be the same as an insult; or a laughing matter.
You could try rather basic things, a few steps above 'repair disk
permissions' in Disk Utility. That's been around since OS 10.1.5.
And it has a place among other steps one can do to help out.
Sometimes, you can start up into SafeBoot mode; then choose to
run Disk Utility, and repair disk permissions. When done, quit D.U.
and restart the computer normally. - Other repairs to the system may
be performed by booting up from the OS X installer and run Disk
Utility from the menu drop-down options in the main Installer window.
You can repair disk, verify disk (SMART verify), repair disk permissions
and verify disk permissions. Plus other aspects of Disk utility that are
tools to set up partitions and other things beyond a basic simple fix.
SafeBoot mode, basic:
+Hold the Shift key down on start-up, keep holding it until you get a login+
+screen, enter admin password, then when desktop appears, you can+
+use GO in menu bar to find Utilities folder, and run Disk Utility's repair+
+disk permissions. When done, quit the Utility and restart.+
There probably may be some .plist file controlling the view of image icons
and since I haven't followed that issue (experienced it in the past, forgot
what I did to fix it) I am not sure what preference file to suggest trashing.
But you can be very selective, when knowledgeable, and do that. Then,
later on, when you restart the computer the default setting would return.
You could set that to whatever (if not the default) & that may fix the matter.
{One preference file location that probably would contain your user account's
.plists would be in the Macintosh HD> User folder> Library> Preferences>
...Now, the correct one among these becomes important. There is a desktop
plist, a finder plist, and others. Since each user in a Mac with their own setup
account can change these, yours should be in your booted user account.
However, some time has passed since this kind of issue occurred and I didn't
need to delete a .plist to resolve it. Yet that may be a short fix.}
These issues usually have a cause; sometimes it may be due to other items
not quite right in the user interface and symptoms of that sometimes show up
in odd places and they may not be directly related. Subtle and dismissed, a
few of those quirks are not show stoppers in OS X. A 'safeboot' & disk utility
may resolve some; to find a correct .plist preference file & trash it may, too.
If the computer's hard disk drive is getting full of content you have added, it
may be time to archive image libraries and/or music libraries off the Mac's
internal hard disk drive and then thin out content on the computer. That can
help a computer run better. Damage to data on the computer drive may be
a result (or outright is) of over-filling the hard disk drive. Overwriting content
is sometimes an issue; it could be subtle, too, for awhile. Checked into it?
For some preventative maintenance chores, I have and use OnyX which is
a free running utility tool (which I refer to as a utility interface tool) that pulls
the strings in OS X that some users would not think of the Terminal utility
ways of making them work; this gives you a GUI format, an application to
run various sets of items rather easily. If done without concern, these tools
can do bad things (same as booted Disk Utility, drastic tools are onboard.)
OnyX is a free-running downloadable app from Titanium Software; and since
I only use it maybe once every several months (or sooner if bored or if active
in using one computer more than usual) & have it run in Automation selection
having chosen all the check-box choices, so it will do those. I also have OnyX
set in its preferences, to restart the computer after it is done running those.
This may do more than you need in this selection of Automation. I have never
had any issues with this; but some preference choices system-wide may need
to be set back to your choice, as it can be also set to wipe caches or other old
logs and misc stuff. A few settings won't make much different to default from.
Usually, I prefer not to shut off or restart my computer until such time as when
Activity Monitor shows some issue with virtual memory and swap files or space
on the hard drive being excessively allocated as Virtual Memory. At times, a
restart may be required. My Mac can run a few months without restart, but it is
left to sleep or I will put it to sleep. Even so, some basic background OS X items
may not automatically run as they should. You can force the maintenance cycles.
If the 'show icon preview' does not work even after performing catch-up maintenace
and including OnyX, SafeBoot, and others; and if you have at least 30% of the total
hard disk drive capacity open or free from use, then you may have to consider a few
other ideas. (Removing the plist file may be the only thing you'd need do.) Another
idea in a few cases of more severe odd behavior, and if you updated your Leopard
10.5 to your current/last level through use of the Delta or small update file, would be
to get the larger Combo (last version) and after repairing disk permissions, install it
over the similar system in your computer. 10.5.8 over 10.5.8. Then restart and go in
and repair disk permissions again. Perhaps later on, safeboot and do them.
That much effort is seldom needed. Preventative maintenance and care to not over-
fill the hard disk drive, helps to almost never see such a problem in your Mac OS X.
{In a few cases, people who have upgraded from an earlier OS X version (Tiger-to-
Leopard, for example) and had a problem, may still have a similar problem later. So
it is best to fix issues and not hope to upgrade over them. Unless it is a totally new
bare-bones secure zero-overwritten drive, correct partition map, reformat, new install.
Then, there should be no doubt if there was an odd problem in the software, only.}
Hopefully some of this late night rambling may be of some help.
+Answering a question in these forums can be like replying to a+
+statement thus, "why won't my car go?" And an answer starts+
+out by asking dozens of questions about the car itself and the+
+status of the car, if it has fuel, tires, if it's been in a flood, or if+
+there is an engine, fuel, battery... At least I know yours runs!+
Good luck & happy computing!

Zoom-to-fit Not Working in Preview, & other features, too.

I recently upgraded to Snow Leopard, and have since found that Preview is not working properly. This is something I use almost every day, & it not working has created a real disruption to my work-flow. I've noticed that others have complained about this, and have been doing so since at least October of 2009! Apple has obviously not addressed this, as I've done all the updates, and still it doesn't work. The Zoom-to-fit won't work, altho it sometimes will when there's only a little bit of space left, & sometimes when the image is too big, it may reduce. However, the "automatically resize" doesn't work either, and some other features work erratically as well. Sometimes when I change the resolution of the picture, it will zoom to fit, & sometimes well, so many things don't work, or do, but so rarely, I can't even remember all the instances.
Does anyone actually have some kind of work around, or solution? I've done the trash all the preferences, etc., which didn't do anything, and am stumped at this point, thanks...

Tom Gewecke wrote:
does Apple really know about this, and are just ignoring it or are they working on a fix, or ?
Surely you understand that you are not talking to Apple here, just other users like yourself. Whether Apple knows about it depends on whether you or someone else has used the bugreporter or feedback channel to tell them. As for what action they are taking, nobody here is ever going to be able to give you an answer.
Yes, I do understand that, and my question was in response to being told that
"Preview in SL is broken", by one of the "experts" when I posted my own thread about it not working properly. To me, that response implied this was a known condition, & that this person knew that Apple knows, & since this was all he said, w/no other advice, it further implied that a fix would come out whenever it will, and there's no use in pursuing it further. So, my question was to anyone else to affirm or deny that is or isn't the case.
Plus, I've read that in fact, some employees of Apple do contribute to the discussions (as they surely should, if for no other reason, that what I just spoke of, to let us know when an issue is a known one, thus nothing else can be done until Apple releases a fix; thus preventing users from wasting time &/or screwing something up worse, attempting to fix it)
Does Adobe Reader provide a possible replacement for Preview for your purposes?
Don't know, I'd rather not have to open it for all the times I would simply use Preview, why have it as part of the OS if it doesn't work? I'd think Apple would fix it, or not show features it can't do. That said, your question is actually the first response I've seen yet, that at least is a possible work around, thank you.
(another thread on the same issue was marked "answered" & closed, despite no one having offered up a fix),
How a thread is marked is totally up to the person who started it. If you have a problem with how it was done, you need to take it up with that person I think.
I will, but it's not the person who closed the thread, as that was done nearly two months after it was marked "Solved". And yes, it could have been archived due to no further comments, although we've no way of knowing, since there's no date of archiving shown. And that is what I'm wondering, did Apple just close it, to avoid the topic being taken to the top of the list? If this feature is broken, why haven't they fixed it, now nearly a year later???
And I have personally reported this in several feedback forms. I refuse to sign up for the developers group, just to file a bug report, since I would have to answer all the questions in the application form without knowing what the heck I was talking about, since I am hardly a developer/programmer, techno-geek, etc., and shouldn't have to jump through all those hoops, just to report to Apple that something's screwed up! I can send bug reports via Safari w/o signing up as an advanced computer engineer, why should I have to for reporting the same with Preview? If Apple chooses to ignore feedback reports, as well as their discussion boards, then what real customer service would that be?

Captivate 7: PowerPoint animations not working when previewed in HTML 5

I have imported my PowerPoint presentation (pptx) into captivate 7. On two slides, I have an image set to fade 1s after the page opens. (The slide duration is 3s). If I scrub the playhead over the timeline, the image fades as expected, and if I select the 'preview in web browser' option, it works as well. It is only when I select 'preview HTML 5 output in web browser' that the image doesn't fade as expected.
I have 2 other click boxes on the slide. One is to exit and the other is to download a file. Both are on the timeline for the full 3s. There is nothing else on the slide - what am I doing wrong?

Hi mary_td,
HTML5 output will work for PPTX files with High Fidelity checked in PowerPoint Import dialog while importing on Windows.
It will not work for PPT file as mentioned in your post. You can save your PPT as PPTX if that is the case.
If you still see the issue. Please mail me the pptx file.
My Email ID: [email protected]
Regards,
Nitin Kumar
Adobe Captivate Engineering Team

Comments Not Working on Website - published to non-.mac server

Hi there. I've read on a few non-apple sites of users having trouble with Comments and some other functions of their websites, built in iWeb, not working when they publish to a non-.mac server. I've built my website in iWeb, published via CyberDuck to a BlueHost server -- but now users can not post comments on my blog.
Has anyone found a way to fix this issue??
It seems incredibly pointless to even now have my own domain. I'm super close to giving up on iWeb all together because of this ridiculous issue.
Thanks in advance.
www.kellerowski.com

Unfortunately, blog comments are a MobileMe only feature along with the hit counter etc.
You have to publish to MobileMe if you want these features.
There are workarounds however. If you want to continue to use an iWeb blog, then you can use a third party comments feature. Take a look here http://www.intensedebate.com. It is free to set up on the site and all you then do is copy and paste the code into an html snippet on the page you want comments to appear in whatever format you want them.
Your other option is to ditch iWeb and if it is just a blog you want, use something like http://www.wordpress.com. This is free and you don't need a domain name and the blog is published on WordPress servers.
Your other option for a blog is http://www.posterous.com.
The iWeb blog system is not that good, so you might look into changing if a blog is what you want rather than a website.

Ducking music-track not working in preview

Tried ducking a music-track in several clips, but couldn't get it to work reliable. On the first clip it worked, on others volume level of the music-track stayed the same, whatever value I've set the ducking slider to.
After much experimenting and browsing the web, I found the following post by Winston Churchill:
http://discussions.apple.com/thread.jspa?messageID=6636047
He recommended to export the clip and check the final result. And in fact, the music level followed the setting in the exported movie.
So this is a bug in iMovie08. While it is not a big issue, if you know the ducking works on export, it can drive you nuts, if you rely on iMovies preview mode and can't get it to work.
And what makes me wondering even more, that this post is from Feb 18, 2008 and the bug is still present in June 2008.
Peter

hi there
i had a problem with my wifes iphone 4s, today morning while travelling to work i changed a setting on repeat option and changed it to repeat artist, it was fine until when i finish my work and on my way back i found songs are not playing anymore, lots of stop signs next to my song list, play/pause button not working, album arkwork keep moving from one to another on its own, so after i reach home i try to do some research on Apple support communities, try to soft reset my phone closing all the apps on background didnt work, also note that control centre music player was not working as well. none of the solutions worked. after trying for two hours i found out that the trouble is in repeat options , so i changed it from repeat artist to repeat off. and the music start playing as usual, but i still have those stop buttons next to the songs i tried to play earlier. At least it fixed temporarily. please also note that in the meantime i tried to sync my phone with the pc and suddenly its start syncing all the songs again assuming there were no songs on my iphone. so guys i think soft reset might not help all the time but try to remember what settings you changed recently and change it back to the original option, not sure ,but it might help.

Spry not working in preview only blue non-styled text

Similar Messages

Maybe you are looking for