Spry Table, Accordian, and Flash question

Is it possible to build a spry table that automatically
updates a spry accordian with different flash files? i.e. have a
table that listed four flash videos and when the table link was
clicked that flash video would appear in the accordian? Choose
another link in the table and then that flash video would appear in
the accordian. etc I know you can link jpg's and accomplish this
but I would love to do the same thing with some flv filles. Anyone
know if that is possible and how to write the link in the xml file?
thanks
Kilgore

All Active content on a page will always rise to the top, so
to speak,
including Flash, certain form elements, Java applets, and
Active X controls.
This means that each of these will poke through layers. There
is not a good
cross-browser/platform reliable way to solve this issue, but
if you can be
confident in your visitors using IE 5+ or NN6+, then you can
use the Flash
wmode parameter (however, Safari does not support this
properly!).
Adobe articles:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15523
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14201
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"snikos" <[email protected]> wrote in
message
news:fm8594$4l8$[email protected]..
> hello
> i have a table with 2 rows and 1 column , in the fisrt
row i have a spry
> popup
> menu and at second one a flash clip.
> the problem is that the popup menu goes under the flash
content when you
> put
> the mouse over it, what can i do to fix that problem?
>
> thanks
> sorry for my english!
>

Similar Messages

Hi guys, problem with grey screen and flashing question mark. on top of it while in utility, i'm unable to verify, verify disc permission or repair disc0 which is obviously my main hd. any ideas where to go from here? tried to reistall osx but no luck.

hi guys, problem with grey screen and flashing question mark. should be straight forward affair but on top of it while in disc utility, i'm unable to verify, verify disc permission, repair or even erase disc0 which is obviously my main hd. any ideas where to go from here? tried to reinstall osx but no luck, stucked when asked to chose location to install osx. would really apreciate any kind of help with this cause i'm quite new mac user. ty

If you don't have a backup, read this:
https://discussions.apple.com/docs/DOC-1689

Spry Accordian and Flash

I'm working on a Spry accordian that will display text and
Flash audio players. Unfortunately, the Flash audio player only
shows within the default tab only-not any of the others. I believe
this is part of Flash trying to conserve system resources. Some
browsers don't give pages and windows that are in the background
(or not visible or "below the fold") any "resources." Only the
visible objects are given resources. So this I think also applys to
accordian windows other than the default. Ordinarily, refreshing a
regular page with Flash audio players scattered about would fix it,
but with a Spry accordian it just reverts back to the default tab.
Hope this makes sense.
Can anyone suggest a workaround?

Hi,
what Spry version do you use? If you have Spry 1.4 we had a
bug for Accordion that was fixed on Spry1.5.
If your Spry version is 1.5 please give us an url to see your
problem.
Thanks,
Diana

Folder with face and flashing question mark, what to do when this happens?

I'm sure this has been asked a million times, please help, my brother has a ibook G4, OSX 10.3.9, about 3 years old and now when he turns on the ibook it has a folder with a face in it and a flashing question mark. Do you just leave it and it will sort it self out or is there something to do to make it go away? Any help will be appreciated. Thanks

I have replaced a 40 G harddrive with a seagate 160 G drive. When I try to start it it only comes up with the flashing question mark. I have tried to boot off the install CD, but it only flashes the question mark. This is my daughters computer and she really needs it to work for school.
I have tried to "restore" using my new Mac Book and the old 40 G drive in an external USB case. But still is no good. I have used DiskWarrior and the drive will boot.
This is an ibook G4 running 10.4.2

Installed new hard drive and flashing question mark appears

I bought a new hard drive for my macbook pro (mid 2009) because my original harddrive bit the dust... I purchased it off of amazon which states that its specifically for macbooks and the reviews appeared to back it up. I saw a lot of people with great reviews of the same model of macbook that I have so I figured it was the best solution.. I connected the new hard drive but I am getting the dreaded flashing folder/question mark. Is this normal before re-installing the OS x? Heres the problem, I am out of town on business and do not have the original OSx disc on hand. So my question is, is the flashing question mark normal upon installing a new harddrive? and if so, is there away to install the OSx onto the new harddrive without the disc?
my macbook was running mavericks before the harddrive went to poo, however I did try to re-install mavericks before i ultimately realized that I needed to new harddrive. I noticed that rebooting my mac with command+r would give me the option to reinstall mavericks without a disc or anything. the next question I have is, would this still be do-able on the new harddrive? I tried the command+R option on the new harddrive but nothing happens.
Can someone help me out here, I am getting a little desperate as I have gone over a week without my mac and theres so crucial things I need to get done! Luckily I have all my stuff backed up on an external hard drive, I just need to get the mac running again. Thanks for taking time to read!

1. Yes, it is normal. If there's no OS on the drive, there's nothing to take the computer past that point.
2. No, there's no way on that Mac model. You need to use an existing system(see #4).
3. Not on that Mac model; it doesn't have the Internet Recovery system, and there isn't a recovery partition on the new drive.
4. If the backup drive contains a bootable clone of any compatible OS, or a Time Machine backup created from Mac OS X 10.8 or newer, connect it and restart the computer with the Option key held down. If it doesn't contain either, you can't.
(105476)

Wet iBook G4 and flashing question mark

Hi there!:)
I have a 12" iBook G4 with Panther. Yesterday accidentally it got soaked due to a flooding...
I've opened it and dryed it..
Today I see a flashing question mark when I start the Mac.
I've started up from the system software CD.
From the Apple menu I've choosen Disk Utility, but there were no hd seen...but the disk utility could see the external hd.
I've tried to reset the parameter RAM (PRAM), but nothing changed.
I've done the Apple Hardware Test and the result was that all is ok.
I've tried to install the system on an external hd but, in the pane where you select the destination disk, there were no disk seen,no internal and no external (even if connected).
Is this only an hd problem?Or something else?
Can I solve it by changing the hd?
Thanky so much for your help in advance!

Unfortunately, that external drive won't help you, even if you install OS X on it. An iBook can't boot from USB. Additionally, the drive needs to be formatted using the APM partition scheme as Mac OS Extended (journaled).
If you're game for tearing down your computer once more, pick up an external enclosure that uses Firewire (you can get them at http://www.macsales.com), remove the drive from the computer and place it in the enclosure, then see if the computer can see it. If not, the drive is dead and needs to be replaced.
~Lyssa

Why won't my MacBook Pro start up? White screen and flashing question mark.

Hi,
I've had my MacBook Pro for almost 2 years now and I installed OS X 10.8 about 4 months ago.
Today I turned the MacBook Pro on and a white screen with a flashing question mark appeared. I tried then getting the startup manager up: turning on the laptop and immediately holding in alt (option). But nothing appeared for about 25 seconds until a rotating Earth labelled 'Internet recovery' appeared that gave me options to join wireless connections. However, my internet wasn't in the options and when I tried typing in the information required to join my internet the laptop would just load and never find it.
I then tried putting in my Mac OS X install DVD (10.6.7) and help in C until the apple logo appeared on the screen and the little rotating loading circle appeared. That then disappeared and a cicle with a cross through it appeared (similar to a no entry sign). Then after about 30 seconds a blue screen followed by a grey screen appeared until eventually the disc ran properly. I then went into Disk Utility but there was no option called Macintosh HD, only the discs content. It wouldn't let me first aid, erase or repair anything.
I'm totally stumped and have 4 exams at university within the next 2 weeks. I'd really appreciate it if anyone could help me out here?
Thanks,
Best wishes,
Connor

The support article linked below is somewhat outdated. Where it refers to starting up from an installation disc, you should instead start up in Recovery by holding down the key combination command-R at the chime. Release the keys when you see a gray screen with a spinning dial.
If you don't have a current backup of all the data on the startup volume, and you want to preserve that data, then you must try to back up before you do anything else. Ask for instructions if you need them.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to reinstall OS X from Recovery, if necessary. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
A flashing question mark appears when you start your Mac

On start up my mac is showing a folder and flashing question mark sign?

On start up my mac shows a folder sign & flashing question mark?? Help and Why??

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Assistance with Disk Warrior and Flashing Question Mark

Hello, guys!
I need a help. My computer was not booting and kept flashing question mark. I've tried First Aid, didn't help. Then I've checked with Apple store technicians, after all they reccommentd me to run Disk Warrior v.4. I did, but it couldn't create a directory for the files. What does it mean? What would be next step?
Thank you very much for any advice.
Message was edited by: Host

Hi, Olimpia. If your hard drive's directory is very, very badly damaged, DiskWarrior may not be able to reconstruct it. Did you see an error message in Diskwarrior that said something like that? If so, you have no choice but to use something like Data Rescue II to recover what files it can, and then erase and zero the hard drive and start over.
If you didn't see any error message, but Diskwarrior seemed to be taking a very long time and didn't appear to be doing anything, it was probably still working and just needed time and patience. I've seen several reports of Diskwarrior successfully rebuilding badly damaged directories but taking several days to do it, and one instance when it successfully completed a rebuild after *14 days* of continuous work. If it doesn't show any error message, just let it keep on working.

Clicking sound and flashing question mark folder

This morning I started getting a repetitive clicking sound from the left of the machine. I wasn't using it at the time.
This stopped, and I tried closing apps: got the spinning beach ball. Let it run for a while, then tried force quit, which didn't work - the "Force Quit" window didn't appear. So, did a power off by pressing the power button.
At start up got a gray screen, the clicking noise, and then the folder icon with flashing question mark. Tried another start, got the chimes and blue screen and the clicking noise this time, then the gray and question mark.
My guess is I've got a bad hard drive: should I keep trying to start up so I can try to back up if I get a good start (last backed up a week ago) or is it doing more damage to keep trying?
Is it worth trying to run Disk First Aid or Tech Tool since it seems to be hardware related?

If it's clicking, it's probably failing. Try things in Apple doc.#58042 on Flashing? mark.
If the drive still spins, You could try the free demo of DataRescuell .
If the demo "sees" your stuff, you can purchase the full version to rescue the bigger files. Don't use the drive, till you get this program, if the demo works. Best chance of recovery. Otherwise Data Rescue companies will charge you a fortune! Everyone needs to have at least one backup of their system.
Cheers! DALE

Imac G5 won't start white screen and flashing question mark

tried every key combo recomended - erased HD using target mode/firewire with laptop - but won't boot up from install disc...

The white screen with flashing question mark means that it cannot find a bootable volume.
The iMac G5 will not boot from just any install disk. Ideally, use the grey restore disks which came with the computer. If you've lost these, you can order them direct from Apple. Alternatively, a Mac OS X 10.5 retail install DVD will work provided the iMac G5 has also 1GB RAM (minimum requirement for 10.5).
Sometimes, if the internal drive is faulty, it can take a long time for the computer to recognise other disks. I would suggest holding down the option key on the keyboard (labled alt on some keyboards) and turning the computer on, keep holding alt until you get to the early boot menu, insert your DVD/CD, and click the circle arrow to refresh, wait a bit and the DVD/CD will show up and you can click on it to select it and boot from it by pressing the straight arrow.
After a little while it will get to the install menu, select your language, then on the next screen go through the menus to find "Disk Utility" (it's in different places on different versions of Mac OS X).
You will want to check that the internal hard drive is detected, and that it doesn't have a SMART error (it might be red, or say that the disk is failing). If you get that far, then (assuming you have erased the disk previously, as this will step really will erase the drive and take all your data with it) partition the drive, making sure that under 'Options' you select Apple Partition Map (this will be the default on earlier versions of Mac OS X, but might not be if you've erase the disk from an intel Mac like a MacBook).
Once, you done all that, and there haven't been any issues, you should be able to quit Disk Utility, and carry on with the sytem install as usual, and a 30mins to 2 hours and reboot later you should be booting from the internal drive again.

Using Spry Master Details And Flash Videos

I orginally posted this in the Dreamweaver forum but found
this one and figured it was a more appropriate place.
Hi, I am using the Spry Master Detail set to Dynamically load
a flash player into a detail area. Works great in Firefox but
doesn't load the player in IE.
http://www.3screensart.com/default5.cfm
I have tried various methods
http://www.3screensart.com/default6.cfm
but still isn't working as intended.
I could go back to iFrames but really don't want to do that
either.

Did you ever get this to work? I am trying to do something
similar with no success. I tried swfobject and other ways of
getting the parameters through Spry to Flash to no avail. Something
in Spry is mangling my embed on the way to IE whenever it's
included in a Spry region.
I am reluctantly being forced to find something other than
Spry due to IE.

Spry tables: row and column rollover

I have created some tables with spry and they are very nice.
I got the nice rollover effect to work on the rows, but the table
has enough rows and columns that if the the row AND column where
highlighted that would be even better. Is there a way to get the
row and column to highlight at the same time (Essentially
highlighting or intersecting at particular cell or data point)?
Thanks.

http://lawrence.ecorp.net/inet/samples/dhtml-rollover-tble-cols-rows.shtml

Export tables, sequence, and package question

Hi all,
I've export table like: exp username/password file=export.dmp log=export.log tables=A statistics=none.
The export statement above just export only the table "A" structure not the table "A" data. So, how can I move all the data from table "A" to table "B".
How do I export the sequence, and package and its data also?
Thank you very much
Kevin

Can you create a DBlink in order to do the insert into B select * from A.
Also, you can use the SQL*Plus Copy command.
Here are some links for COPY command:
 Copying Data
 copy command
 copy command vs sql*loader
 
Here is a link for moving code:
 exporting packages,function etc. from one user to another.

Flashing Question Mark on Boot-Up

Any help would be greatly appreciated with a problem I am having.
I have a Mid 2009 2009 MacBook Pro that is showing a flashing question mark against a grey background when I try and start it up.
If i remove the HDD and place it in a USB caddy the system boots and runs just fine but the same drive does not appear in the list of bootable drives (in fact no drives appear)
I have tried with several known good HDDs from other Macs.
I have tried resetting the NVRAM with Command-Option-P-R but each time the same grey screen and flashing question mark remains - no options appear.
I have tried to resting PRAM via Terminal - refuses to recognise command.
I have removed hardware password using System disk.
I have pulled my hair out.
None of the above have worked.
Does anyone have any clues as to anything else I can try?
Many thanks.

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Spry Table, Accordian, and Flash question

Similar Messages

Maybe you are looking for