SpryAccordian jumping at the bottom when it opens or closes

can't describe it any better - when i open or close the Accordian, the height wants to lengthen by several pixels while the js is being executed, and then jump back to its original dimensions -
see :
http://www.adhllc.com/glenn/e107/
i've seen this discussed before, just didn't find a successful fix.
can anyone help? we can't have this...
thanks!

glennn.php wrote:
can't describe it any better - when i open or close the Accordian, the height wants to lengthen by several pixels while the js is being executed, and then jump back to its original dimensions -
see :
http://www.adhllc.com/glenn/e107/
i've seen this discussed before, just didn't find a successful fix.
can anyone help? we can't have this...
thanks!
I get the impression that your accordion is not a Spry accordion. Thise impression has been created by a legal notice as follows:
* Accordion Content script- (c) Dynamic Drive DHTML code library (www.dynamicdrive.com)
* Visit http://www.dynamicDrive.com for hundreds of DHTML scripts
* This notice must stay intact for legal use
For further help, I suggest that you go to dynamicDrive.com.
I hope this helps
Ben

Similar Messages

My screen is oversensitive and letters and numbers jump onto the screen when my finger gets close so that it is impossible to write what I want. I tried turning on and off the phone but still the same when I turn back on. Any help or advice appreciated

My screen is oversensitive and letters and numbers jump onto the screen as my finger gets close. help

You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
https://discussions.apple.com/message/23957654#23957654
Peace
Harry

My Firefox has JUST started jumping to the BOTTOM of a web page when I hit either the Page Down key or the Down Arrow, WHY?!?

I am running Windows Vista Home Premium, Service Pack 2. Today my Firefox started jumping to the BOTTOM of a websites page INSTEAD of going down one screen at a time like the Page Down key has been doing (on any browser I have ever used).

You may have switched on caret browsing.
* http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox

Is there a keyboard shortcut to jump to the bottom of my library?

Surely there is such a thing, but I can't find it and it's killing me. I'm using Apple's wireless keyboard if that makes a diff. Thanks!

Look for the "End" key; that will jump to the bottom. Note that this doesn't change which track is currently selected, only which tracks are showing in the view. On Apple laptops, the "End" key is the right arrow key when you hold down the "fn" key.

I would like to have at least 1 of my toolbars displayed at the BOTTOM of my open browser screen.How do I move a toolbar from the top to the bottom of the page?

I would like to have at least one of my toolbars displayed at the '''BOTTOM''' of my open browser screen. How do I move '''a''' toolbar from the top to the bottom of the page? I do NOT want to do this by using an extension, and when I read about the extension, I really did not see how it would move the toolbar from the top to the bottom any open browser page.
Thank you in advance for supply the answer and procedure to get this accomplished.

Try this extension to create extra toolbar at the bottom and drag items from other toolbars on it.
*TotalToolbar: http://totaltoolbar.mozdev.org/
''(compatibility is at 13.0a1, so you may need to override the installation to check if the extensions works)''

Why does my cursor suddenly jump to the bottom left of my screen?

Using a Magic Trackpad with a Macbook 5.1 running Snow Leopard.
Occassionally I'll click and the cursor will suddenly jump to the bottom left of the screen. (Sometimes opening the App Store or flicking to Finder!)
Anyone got any ideas?

I've had this problem since I bought it. I use a Mac Pro and the Magic Track Pad has become an $80 coaster. It's erratic and impossible to use for more than a few minutes. Good luck getting an answer, I've been looking for some time and then gave up.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

My safari,4.1.3 on the bottom says cancelled opening page. have cleared the cache,and reset but it still does it on some pages,not all. Any ideas

My safari,4.1.3 on the bottom says cancelled opening page. have cleared the cache,and reset but it still does it on some pages,not all. Any ideas

It's possible that the pages you are attempting to open simply won't work with that old web browser.
If you're using Mac OS X Tiger, update to the latest version, which is 10.4.11. (You might be using that already. Your profile says you're running 10.4.1, but I bet that's just a typo.)
Then get the latest version of Safari that will run on Tiger. (And... you have that already: 4.1.3.)
You might try a more modern browser designed specifically for your current OS. That would be TenFourFox.
Information on TenFourFox:
http://en.wikipedia.org/wiki/TenFourFox
Download TenFourFox here:
http://www.floodgap.com/software/tenfourfox/

So I have an iPad with the smart cover, and it's usually supposed to turn on the iPad when u open it, but it's no doing that for me. Nor is it turning off without pressing the button. What is the meaning of this?

So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?

Wait a sec did this just start?
You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now.

Good afternoon ladies and gentlemen! My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

Good afternoon ladies and gentlemen!
My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

<moved from Adobe Creative Cloud to Bridge General Discussion>

How do I set a specific page to open when I open a new tab in Firefox? I can open the page when initially opening Firefox, but not for subsequent tabs/pages.

How do I set a specific page to open when I open a new tab in Firefox? I can open the page when initially opening Firefox, but not for subsequent tabs/pages.

You can use an extension to set which page to open in a new tab:
*NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
*My Homepage: https://addons.mozilla.org/firefox/addon/my-homepage/

Why does My I-pad drop the internet when I open several sites.

My I-pad drops the internet when I open several sites. Why?

If you are saying that Safari crashes when you open several Tabs then:
Most likely the problem is bugs in Safari which are crashing the App.
You can try Settings > Safari > Clear History and Settings > Safari > Clear Cookies and Data.
That might help but report these crashes and the sites that cause them to Apple at:
http://www.apple.com/feedback/ipad.html

I keep getting the message when I open Muse CC, that the latest version is here and that i need to download it... But when i click "Download Latest Version" and it takes me to the applications manager it tell me that Muse is "Up to date"..... I also downl

I keep getting the message when I open Muse CC, that the latest version is here and that i need to download it... But when i click "Download Latest Version" and it takes me to the applications manager it tell me that Muse is "Up to date"..... I also downloaded a template from Muse and it tells me when I open it that i also need the latest version... Can anyone explain why Iam getting this message and Why I can not up date?... Much appreciated

Download the creative cloud desktop app using the below link:-
Download Adobe Creative Cloud apps | Free Adobe CC trial
And then check if you get install Button for Muse CC 2014.3
Regards,
Neha

If I load a video on a nano to give out at a business conference can recipients see the video when they open the device? Iwas told it will wipe when a new user opens the device.

If I load a video on a nano to give out at a business conference can recipients see the video when they open the device? I was told it will wipe when a new user opens the device.

No, it will wipe it when they try to connect it to a computer and set it up under their own Apple ID. When they turn on the device the first time without connecting it to anything they will be able to see the video.

SpryAccordian jumping at the bottom when it opens or closes

Similar Messages

Maybe you are looking for