SPS 18 Installation fails while asking for Java Crypthography Extension
Hi @ all,
some weeks ago we deployed the file "tc_sec_java_crypto_signed_fs_lib.sda by the SDM. But we didn´t enabled strong encryption in the portal.
Now, i want to update my portalstack from SPS 14 to SPS 18 and while i update J2EE Sapinstaller asks for Java Crypthography Extension-Source-Code. But i don´t want to install it, because automatically the database is set to strong encryption and i can´t use / administrate in anymore.
I still undeployed the IAEK-FS-File but the problem persists.
I´m very pleasent for every answer.
Best Regards
Lars
Hey,
that´s fine Sascha.
It works greatly. SPS 18 not asking für JCE anymore.
The Installation is now running.
Thx a lot!
Greetingz
Lars
Similar Messages
-
Change detector failed while scanning for changes to type User
I'm receiving lots of system log warnings in IdM.
These warnings are not bound to any particular action in IdM, they just do appear while IdM is on.
Almost one warning per one second.
Change detector failed while scanning for changes to type Server
Change detector failed while scanning for changes to type UserForm
Change detector failed while scanning for changes to type User
Change detector failed while scanning for changes to type Resource
SysLog detail:
Timestamp 123
Event
Server server11
Severity Warning
Component Repository
Error Code OCDT00
Message Change detector failed while scanning for changes to type User
Reported cause java.lang.NullPointerException
java.lang.NullPointerException
at com.waveset.repository.ObjectChange.equals(ObjectChange.java:112)
at java.util.HashMap.eq(HashMap.java:299)
at java.util.HashMap.containsKey(HashMap.java:381)
at java.util.HashSet.contains(HashSet.java:182)
at com.waveset.repository.ObjectChangeManager$RemoteChangeDetector.dispatchChanges(ObjectChangeManager.java:398)
at com.waveset.repository.ObjectChangeManager$RemoteChangeDetector.run(ObjectChangeManager.java:314)
at java.util.TimerThread.mainLoop(Timer.java:512)
at java.util.TimerThread.run(Timer.java:462)same here, just deployed 8.1 with oracle as db. It results in syslog table growing into 10+G and still growing.
wonder if there are others who are seeing this.
my "syslog -d 1" output looks like this...
2009-12-02 04:52:55.972 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type Account
2009-12-02 04:53:06.400 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type Server
2009-12-02 04:53:06.578 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type User
2009-12-02 04:53:06.914 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type Account
2009-12-02 04:53:17.479 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type Server
C:\Program Files\Apache Software Foundation\Apache Tomcat 6.0.18\webapps\ims\bin
lh syslog -d 1 -
Adobe illustrator asks for Java SE 6 and the link doesn't work at Apple
Adobe illustrator asks for Java SE 6 (a legacy installation) and won't run without it. The link to the legacy version at Apple goes to an error page ("too many redirects") Does anyone have a solution? Has something changed recently. The mac help page is dated March 27, 2015, but the link at for Java SE 6 results in an error for me.
Try this: Apple Java 2014-001.
-
After Installing the OS x Mountain Lion some o the softwares are asking for Java SE 6 Runtime. Can someone please help me find a solution.
By default, ML no longer comes with the Java runtime preinstalled. I believe the route to enabling Java if you are going to need it is to run the Java Preferences app found in Utilities. It will inform you of Java's absence and offer to install the latest version and activate it. On subsequent runs, the Preferences app will allow you to fine tune how the runtime operates.
Note that the new default operation is for the applet plugin to be disabled. You need to enable it as needed and it self-deactivates if unused in awhile. Also important to note that Java comes in both 32 and 64 bit versions and you can set the preferred order. Default is 64-bit but I've had issues with some applets failing to run and have had to switch the order. -
Failed while scanning for CD/DVD drives, error 2355
Failed while scanning for CD / DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
As far as I know I do NOT have a virtual drive on this pc.
Any help???Failed while scanning for CD / DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
As far as I know I do NOT have a virtual drive on this pc.
Any help??? -
Trying to install Illustrator cs3, during the installation I am asked for photoshop cs4 disk I no longer have the photoshop cs4 disk
Do you own Illustrator CS3? An older version should not only not be asking you to utilize a newer version in any way, it couldn't even know about the existence of it.
-
SQLDeveloper keeps asking for java.exe
Using 64 bit SQLDeveloper 2.1 and the 64 bit version of Sun Java jdk - Version 1.6.0_18 the sqldeveloper.exe keeps asking for java.exe at startup. The JDK was installed first.
I pointed the dialog at C:\Program Files\Java\jdk1.6.0_18\bin\java.exe and sqldeveloper.exe starts up OK.
Next time I also have to also point it java.exe - and next time etc.
The only way I could fix this was to edit C:\Program Files\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
Old: SetJavaHome ../../jdk
New: SetJavaHome ../../../Java/jdk1.6.0_18
Using Wordpad and using Run as Administrator - Notepad doesn't handle the embedded line feeds correctly and the file can only be saved when 'Run as Administrator'.
I would have expected the SetJavaHome to be updated after pointing the way to the JDK.
The old value would be OK if the JDK was installed with (within) sqldeveloper except it isn't for the 64 bit version.
Kind regards
Simon
Edited by: Simon Miller on Feb 19, 2010 12:06 PMI just ran into this issue myself after upgrading to SQL Developer 3.2. I never had the issue with 3.1, so I was kind of surprised. Right clicking the desktop shortcut, choosing Run as administrator, and giving the correct location fixed the issue.
Certainly the dialog where you set your java version could be expanded with a bit of help.
Two things could be added:
- SQL Developer is currently certified with JDK 6 and we recommend using JDK 6 instead of JDK 7.
- On Windows you may have to run SQL Developer as an administrator to persist this setting. You will only have to run SQL Developer as an administrator once. This has to do with Windows access controls.
Trivial to address and now there are many less questions on the forums and happier users.
Rich -
Unable to burn CDs using i tunes. Have run diognostics. Summary:- i tunes not running in safe mode.
Invalid lower filters registry value.
Failed while scanning for CD/DVD drives, error 2500
Please help.That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you. -
Problem opening Macroleads Firetool and and Omnileads in Webfire. Tried to see if I could download what it seems to be asking for "Java runtime environment 1.6 u29." Thought I downloaded it, but did not help
I've lost track of what I've done to solve the problem, but in any case I still get the red bar message that says "If you accidentally clicked no to the security warning, please click here to reload".
Can't be clicked...does not work and I have no idea what it means.It is likely that you either don't have Java installed, or you have an out of data version. Go to [http://www.java.com www.java.com], and download and install the version of Java that is for your computer. After doing that, you should be all good to go.
Also, Update all your plugins (Flash, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/]. -
Does anyone know of any Sun Classes for Java Cryptographic Extension -JCE ?
Hello - anyone know of any Sun Classes for Java Cryptographic Extension? If so do you have the Sun class code/s?
Edited by: Mister_Schoenfelder on Apr 17, 2009 11:31 AMMaybe this can be helpful?
com.someone.DESEncrypter
======================
package com.someone;
import java.io.IOException;
import java.io.UnsupportedEncodingException;
import java.security.spec.AlgorithmParameterSpec;
import java.security.spec.KeySpec;
import javax.crypto.Cipher;
import javax.crypto.IllegalBlockSizeException;
import javax.crypto.KeyGenerator;
import javax.crypto.SecretKey;
import javax.crypto.SecretKeyFactory;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.spec.PBEParameterSpec;
public class DESEncrypter {
Cipher ecipher;
Cipher dcipher;
// 8-byte Salt
byte[] salt = {
(byte)0xA9, (byte)0x9B, (byte)0xC8, (byte)0x32,
(byte)0x56, (byte)0x35, (byte)0xE3, (byte)0x03
// Iteration count
int iterationCount = 19;
public DESEncrypter(String passPhrase) {
try {
// Create the key
KeySpec keySpec = new PBEKeySpec(passPhrase.toCharArray(), salt, iterationCount);
SecretKey key = SecretKeyFactory.getInstance(
"PBEWithMD5AndDES").generateSecret(keySpec);
ecipher = Cipher.getInstance(key.getAlgorithm());
dcipher = Cipher.getInstance(key.getAlgorithm());
// Prepare the parameter to the ciphers
AlgorithmParameterSpec paramSpec = new PBEParameterSpec(salt, iterationCount);
// Create the ciphers
ecipher.init(Cipher.ENCRYPT_MODE, key, paramSpec);
dcipher.init(Cipher.DECRYPT_MODE, key, paramSpec);
} catch (java.security.InvalidAlgorithmParameterException e) {
e.printStackTrace();
} catch (java.security.spec.InvalidKeySpecException e) {
e.printStackTrace();
} catch (javax.crypto.NoSuchPaddingException e) {
e.printStackTrace();
} catch (java.security.NoSuchAlgorithmException e) {
e.printStackTrace();
} catch (java.security.InvalidKeyException e) {
e.printStackTrace();
public DESEncrypter(SecretKey key) {
try {
ecipher = Cipher.getInstance("DES");
dcipher = Cipher.getInstance("DES");
ecipher.init(Cipher.ENCRYPT_MODE, key);
dcipher.init(Cipher.DECRYPT_MODE, key);
} catch (javax.crypto.NoSuchPaddingException e) {
e.printStackTrace();
} catch (java.security.NoSuchAlgorithmException e) {
e.printStackTrace();
} catch (java.security.InvalidKeyException e) {
e.printStackTrace();
public String encrypt(byte[] data) {
return encrypt(new sun.misc.BASE64Encoder().encode(data), false);
public byte[] decryptData(String s) throws IOException {
String str = decrypt(s, false);
return new sun.misc.BASE64Decoder().decodeBuffer(str);
public String encrypt(String str, boolean useUTF8) {
try {
// Encode the string into bytes using utf-8
byte[] utf8 = useUTF8 ? str.getBytes("UTF8") : str.getBytes();
// Encrypt
byte[] enc = ecipher.doFinal(utf8);
// Encode bytes to base64 to get a string
return new sun.misc.BASE64Encoder().encode(enc);
} catch (javax.crypto.BadPaddingException e) {
e.printStackTrace();
} catch (IllegalBlockSizeException e) {
e.printStackTrace();
} catch (UnsupportedEncodingException e) {
e.printStackTrace();
} catch (java.io.IOException e) {
e.printStackTrace();
return null;
public String decrypt(String str, boolean useUTF8) {
try {
// Decode base64 to get bytes
byte[] dec = new sun.misc.BASE64Decoder().decodeBuffer(str);
// Decrypt
byte[] utf8 = dcipher.doFinal(dec);
// Decode using utf-8
return useUTF8 ? new String(utf8, "UTF8") : new String(utf8);
} catch (javax.crypto.BadPaddingException e) {
e.printStackTrace();
} catch (IllegalBlockSizeException e) {
e.printStackTrace();
} catch (UnsupportedEncodingException e) {
e.printStackTrace();
} catch (java.io.IOException e) {
e.printStackTrace();
return null;
// Here is an example that uses the class
public static void main(String[] args) {
try {
// Generate a temporary key. In practice, you would save this key.
// See also e464 Encrypting with DES Using a Pass Phrase.
SecretKey key = KeyGenerator.getInstance("DES").generateKey();
// Create encrypter/decrypter class
DESEncrypter encrypter = new DESEncrypter(key);
// Encrypt
String encrypted = encrypter.encrypt("Don't tell anybody!", true);
// Decrypt
String decrypted = encrypter.decrypt(encrypted, true);
} catch (Exception e) {
e.printStackTrace();
try {
// Create encrypter/decrypter class
DESEncrypter encrypter = new DESEncrypter("My Pass Phrase!");
// Encrypt
String encrypted = encrypter.encrypt("Don't tell anybody!", true);
// Decrypt
String decrypted = encrypter.decrypt(encrypted, true);
} catch (Exception e) {
e.printStackTrace();
} -
The unattended installation failed while installing SQL Server 2008 R2 ????
Hi gurus,
I got an error while installing SQL Server 2008 R2 in Windows 2008 R2 standard 64 bit operating system.
LOG file*
Customized installation of SQL Server 2008R2 for SAP *
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlWriter_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SystemConfigurationCheck_Report.htm
1/16/2012 10:13:34 PM
Message Box "Installation failed"
The unattended installation failed.
Installation Step: The unattended installation failed.
Return Code: -2068052377
Log File: C:\Windows\SQL4SAP.log
Check the log file above.
See SAP note 1144459 for known issues.
Result: vbOK
Registry settings (2/2):
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{3d06c673-5e8a-41c0-b47f-3c3ca0a22e67}
WRITE(REG_DWORD): 4
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{2b9034f3-b661-4d36-a5ef-60ab5a711ace}
WRITE(REG_DWORD): 4
1/16/2012 10:37:32 PM
Quit script with return code 1
Please help me out with this issue.
REGARDS,
RajHello Raj,
MS SQL DB installation specific steps for SAP system is clearly documented in SAP Installation guide. Please download from SMP, read it carefully and install as mentioned in the guide.
Hope it helps.
Thanks,
Siva Kumar -
SCOM 2012 Installation fails while deploying Datawarehouse
Hi All,
I have a strange issue, My SCOM 2012 installation fails during Datawarehouse deployment. (This setup is not SCOM 2012 SP1 OR 2012 R2 it is just SCOM 2012)
When i check the SCOM installation logs it says it tried to connect to my Management server and it could not open Port 5724.
During the installation i checked that the SDK Service was stopping frequently and also a Visual studio debugger popup also occured. Can any one assist in solving the issue ?
Screenshots:
Error logs
Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetExistingManagementServerFromOMDB(String omSQLServer, Nullable`1 omSqlPort, String omDatabaseName, String& firstWorkingManagementServer)
[01:08:57]: Error:
:Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131500, Exception.Message: Could not connect to net.tcp://My management server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0079280.
TCP error code 10061: No connection could be made because the target machine actively refused it 172.17.221.45:5724.
[01:08:57]: Error:
:InnerException.StackTrace:
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
[01:08:57]: Error:
:Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131500, Exception.Message: No connection could be made because the target machine actively refused it 172.17.221.45:5724
[01:08:57]: Error:
:InnerException.StackTrace: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
[01:08:57]: Always:
:Management Server My management server failed to connect, now trying another one.
[01:08:57]: Warn:
:Failed to connect to any SDK in the management group, trying again
[01:09:17]: Info:
:Info:trying to connect with server My management server
[01:09:26]: Info:
:Info:Error while connecting to management server: The Data Access service is either not running or not yet initialized. Check the event log for more information.
[01:09:26]: Error:
:Couldn't connect to mgt server stack: : Threw Exception.Type: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException, Exception Error Code: 0x80131500, Exception.Message: The Data Access service is either not running or not yet initialized.
Check the event log for more information.
[01:09:26]: Error:
:StackTrace: at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetExistingManagementServerFromOMDB(String omSQLServer, Nullable`1 omSqlPort, String omDatabaseName, String& firstWorkingManagementServer)
[01:09:26]: Error:
:Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131500, Exception.Message: Could not connect to net.tcp://My management server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0040216.
TCP error code 10061: No connection could be made because the target machine actively refused it 172.17.221.45:5724.
[01:09:26]: Error:
:InnerException.StackTrace:
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
[01:09:26]: Error:
:Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131500, Exception.Message: No connection could be made because the target machine actively refused it 172.17.221.45:5724
[01:09:26]: Error:
:InnerException.StackTrace: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
[01:09:26]: Always:
:Management Server My management server failed to connect, now trying another one.
[01:09:26]: Warn:
:Failed to connect to any SDK in the management group, trying again
[01:09:46]: Error:
:Error:Could not connect to management group. Can not continue with DW upgrade...
[01:09:46]: Info:
:Info:got MG connection
[01:09:46]: Error:
:Error:Could not connect to management group. Cannot continue with current action...
[01:09:46]: Error:
:FATAL ACTION: GetManagementGroup
[01:09:46]: Error:
:FATAL ACTION: DWInstallActionsPostProcessor
[01:09:46]: Error:
:ProcessInstalls: Running the PostProcessDelegate returned false.
[01:09:46]: Always:
:SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[01:09:46]: Error:
:ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
[01:09:46]: Info:
:SetProgressScreen: FinishMinorStep.
[01:09:46]: Always:
:!***** Installing: OMCONSOLE ***
[01:09:46]: Info:
:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
[01:09:46]: Always:
[01:09:46]: Always:
:****Starting*RollBack*******************************************
[01:09:46]: Always:
[01:09:46]: Info:
:SetProgressScreen: StartMinorStep.
[01:09:46]: Info:
:SetProgressScreen: StartMinorStep.
[01:09:46]: Debug:
:ProcessInstalls: Install Item Data Warehouse Configuration has a Preprocessing delegate of RunXamlPreProcessor. Launching it now.
[01:09:46]: Always:
:Determining actions to be run.
[01:09:46]: Always:
:Done validating action list; now running individual actions.
[01:09:46]: Always:
:Current Action: UninstallPrePreprocessor
[01:09:46]: Info:
:UninstallPrePreprocessor completed.
[01:09:46]: Always:
:Current Action: UpgradePreprocessor
[01:09:46]: Info:
:UpgradePreprocessor completed.
[01:09:46]: Always:
:LaunchExeSetup: Launching E:\SCOM setups\SCOM 2012\Setup\AMD64\SetupInstallItem.exe with arguments:
[01:09:46]: Info:
:SetProgressScreen: Init Exe Install progress.
[01:09:47]: Always:
:LaunchExeSetup: Install return value was: 0
[01:09:47]: Info:
:CheckPointPassed is removing the Rollback property as this is an uninstall.
[01:09:47]: Always:
:SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse
Gautam.75801Hi All,
So i got the actual commands to register the SPN. So the above were wrong. Hope the below is useful for some one if the face the above issue.
In Windows Server 2008R2 – the command is SETSPN –A. In WS2012, it changed to SETPSPN –S which checks for duplicates before it allows you to create them.
Legend: SCOM Server - SCOMSVR.Contoso.com
DNS Domain: Contoso.com
SDK Account: SDKSVC
To add SPN for the SDK Service:
===================================
In Win2k 12
setspn -S MSOMSdkSvc/SCOM Server FQDN Domain\SDK Account name
setspn -S MSOMSdkSvc/SCOM Server name without FQDN Domain\SDK Account name
Ex: setspn -S MSOMSdkSvc/SCOMSVR.Contoso.com Contoso\SDKSVC
setspn -S MSOMSdkSvc/SCOMSVR Contoso\SDKSVC
In Win2k8
setspn -A MSOMSdkSvc/SCOM Server FQDN Domain\SDK Account name
setspn -A MSOMSdkSvc/SCOM Server name without FQDN Domain\SDK Account name
Ex: setspn -A MSOMSdkSvc/SCOMSVR.Contoso.com Contoso\SDKSVC
setspn -A MSOMSdkSvc/SCOMSVR Contoso\SDKSVC
To verify the SPN's
============================
1. setspn -L MS Host name without FQDN
Ex: setspn -L SCOMSVR
2. setspn -L Domain\DSK Action account
Ex: setspn -L Contoso\SDKSVC
Post entering the above commands you should see the entries of the Healthservice and not the entries of the SDK Service.
1. If you are are using a Domain account for SDK / DAS then that entry should not appear when execute the command “setspn -L SCOMSVR”. Where SCOMSVR is the name of the MS and it should be without FQDN.
Example: The below entry should not appear when you enter setspn -L SCOMSVR
MSOMSdkSvc/SCOMSVR
MSOMSdkSvc/SCOMSVR.contoso.com
If you get the above entries for "setspn -L SCOMSVR" then you need to delete and re add the SPN again and re check.
If you get Duplicate entries the below post entering "setspn -L Contoso\SDKSVC" then you need to delete the duplicate entries and re add the SPN again and re check.
Ex: MSOMSdkSvc/SCOMSVR
MSOMSdkSvc/SCOMSVR.contoso.com
MSOMSdkSvc/SCOMSVR.contoso.com
MSOMSdkSvc/SCOMSVR
To delete a SPN if required:
===============================
setspn -D MSOMSdkSvc/SCOM MS FQDN Hostname without FQDN Hostname
setspn -D MSOMSdkSvc/Hostname without FQDN Hostname without FQDN again
Ex: setspn -D MSOMSdkSvc/SCOMSVR.Contoso.com SCOMSVR
setspn -D MSOMSdkSvc/SCOMSVR SCOMSVR
Reference used : http://blogs.technet.com/b/kevinholman/archive/2011/08/08/opsmgr-2012-what-should-the-spn-s-look-like.aspx
Gautam.75801 -
MailServiceHelper Failed while sending email java.lang.NullPointerException
Hi guys,
I am trying to send email with Adobe CQ API.
But i am getting a nullpointer exception at this line: MsgGateway.send(htmlEmail);
This is my method that i am using to send.
import com.day.cq.mailer.MessageGateway;
import com.day.cq.mailer.MessageGatewayService;
import javax.mail.internet.InternetAddress;
public boolean sendHtmlEmail(SlingHttpServletRequest sling,
String fromMailAdress, List<String> recepientmailAddress,
String emailSubject, String htmlbodyMail) {
HtmlEmail htmlEmail = new HtmlEmail();
List<InternetAddress> emailAddress = new ArrayList<InternetAddress>();
try {
for (String recipient : recepientmailAddress) {
if (!StringUtil.isEmpty(recipient)) {
emailAddress.add(new InternetAddress(recipient));
log.error(recipient);
if (!StringUtil.isEmpty(fromMailAdress)) {
htmlEmail.setFrom(fromMailAdress);
htmlEmail.setTo(emailAddress);
htmlEmail.setSubject(emailSubject);
htmlEmail.setHtmlMsg(htmlbodyMail);
htmlEmail.setCharset("utf-8");
MessageGatewayService MsgService = getMessageGateWayService(sling);
MessageGateway<HtmlEmail> MsgGateway = MsgService.getGateway(HtmlEmail.class);
MsgGateway.send(htmlEmail); //nullpointer exception caught here
return true;
} catch (Exception e) {
log.error("Failed while sending email", e);
return false;
I have checked to ensure the bundle com.day.cq.cq-mail and my own bundle is running .
I am also sure that 'htmlEmail' is not null by retrieving the email subject via .getSubject and it did return me the subject.
I do not understand what is returning the nullpointerexception.
Thanks in advance !The MessageGateway instance (MessageGateway<HtmlEmail> MsgGateway) is null therby throwing a null pointer.
Instead of instanciating msgGateway as :
MessageGatewayService MsgService = getMessageGateWayService(sling);
MessageGateway<HtmlEmail> MsgGateway = MsgService.getGateway(HtmlEmail.class);
Inject your MessageGateway as:
@Reference
private MessageGateway<HtmlEmail> msgGateway;
and then call send on msgGateway as msgGateway.send(htmlEmail)
~ Aditya -
Exchange Server 2013: Installation failed while installing Mailbox role.
Hi,
Mailbox role installation failed. I tried to remove and reinstall so many times but it still fails. (but the uninstall is complete)
Below is log from the lastest installation. Could you please help to veify the problem.
Error:
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox.".
Error:
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog
-Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox. Property Name: Database".Hi,
See if deleting the account SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c} in ADUC (you should find it in the Users Container) and then rerun
setup.exe /preparead helps you solve your problem.
Martina Miskovic -
SQL Developer asks for java.exe with the version that has java built in.
I have a user with the following platform:
Windows XP2
SQL Developer Version 1.5.4
The version they are trying to get running is the one that has the JDK built in. However, when they try and startup SQL Developer it asks for the location of java.exe.
However, when I run the same exact version on my workstation, I do not receive the prompt for a java.exe.
I checked the documentation, and I couldn't find anything related to this particular issue, however I may have missed it.
Can anyone provide me with any guidance please? Thanks.Resolved. There was a difference of permissions on the user's machine.
Maybe you are looking for
-
The PC's I use have Windows 7 installed along with the latest version of iTunes. I have previously deleted all components of iTunes and re-installed. This made no difference. The PC's do not recognise my iPod in the Windows Device Manager using 'de
-
Why does my video shows interlacing effects
I am importing HD videos from my Canon Legria HF200. On my user account the videos show interlacing effects, while on the other user account on the same iMac the videos are perfectly imported. We looked in preferences in order to find differences in
-
ADC Apple Display only works by unplugging-replugging power source
I recently replaced my PRAM battery due to the following issues: 1. The ADC Cinema Display quit 2. I kept getting a "update time manually message 3. I lost connection with an external I replaced the battery and it solved the external disk mounting, b
-
Erratic behaviour while firing a BAPI
Hi All, In my application, I am using a BAPI. I enter an account no in the text field and data corresponding to it is returned. The problem I am facing is that, very rarely a data for different acccount no is returned. This happens 1 in 20000 times a
-
Anyone know "what version" of Word that Pages exports to?
I have a business need to know what version of Word Pages exports as? It doesn't state anywhere and I am assuming if it is not a .docx it must be an older version. Any clue or ideas?