SPS19 Recovery Gives Server Error
Hi
I had to restore the R3sidDATA library and also SAPsidDB library after some corruption because of locking on reposrc in applying SPS19 ABAP side only.
When I restart the dual stack instance the ServerX environments will not start and I'm seeing the error below in the trace STD_SERVER0_OUT file.
Any ideas what additional task / restore will resolve this or how to re-generate ?
Thanks
David
¢ERROR! Attempting to run an AutoProbe Connector with an incompatible JVM (expected checksum = 419978209, actual checksum = 32784284
¢ERROR! To fix, re-generate the AutoProbe Connector with the current JVM.
Hi Thomas,
Thanks - this led me to note 1291797 for the full syntax and once re-compiled the server nodes started ok.
Regards
David
Similar Messages
-
When portal server's mobile access pack is accessed through nokia7110 handset simulator then while checking mails I am able to send mails through reply link in inbox but I am not able to compose mails. It gives 'server error'.Please help me out.
Gurmeet,
A couple of questions :-
a. Is this unique for your Nokia browser ? i.e.
are you able to select "compose" using other
simulators?
b. Does your installation also have iPlanet
Messaging server/iPlanet Calendar Server?
c. Have you configured address book correctly ?
You might be seeing this problem if you have not
configured the address book correctly. -
Hello,
When i login by CC updater he gives a "unkown server error". Please help me for solving this problemHello Scott V,
I've tried all options form the troubleshooting doc but still get the error.
I also can't find the opm.db file in the OOBE.folder
grts
Stefan -
F11 Recovery gives me error 0x000000f. How do I fix this?
Model: HP 2000 Notebook PC
Model No: C2N26UA#ABA
OS: Windows 8 64-Bit
This is what it says when I press F11
"Recovery
Your PC needs to be repaired
A required device isn't connected or it can't be accessed
Error code:0x000000f
You'll need to use the recovery tools on your installation media. If you don't have any installation media(like a disk or USB device) please contact your manufacture..."
I forgot the rest and i dont have any installation media (disks).
My PC does not have pre-installed apps I removed them and now I want them back.
Extra info: I still have a OEM partition named Recovery on the D drive...and other partitions
i46.tinypic.com/1z5mc0m.jpg
How do I solve this problem? plese help
This question was solved.
View Solution.HI,
to whom it may concern,
Concerning the problem of 0x000000f, I needed to format my ASUS K53S laptop, and the same error kept on appearing. I didn't know what to do. I even tried all the procedures mentioned on the net, but alas nothing worked; until it occurred to me this:
All you have to do is:
1- go to bios setup
2- disable boot from Hard drive COMPLETELY.
3- activate booting from your CD Drive
4- Save changes and exit.
5- restart your computer .
6. you'll be asked to click any key to boot from CD Drive.
the PC will start from your CD Drive, and you can go on .. -
Using ARR to forward OWA requests to Exchange (On Premises) gives Server Error 502
I have been struggling to configure a Windows Essentials Experience and Exchange On Premises system for our company.
I have two hyper-v guest servers running Server 2012 R2, one with the Windows Essentials Experience role installed and one with Exchange 2013. After weeks of trying to get various parts of the configuration installed, following the various Microsoft
guides, I thought I had finally managed to do it but have failed, again, at the final hurdle.
Exchange is working and users can connect to OWA from inside the domain using the same URL as the external URL. However when accessed from the internet we get "502 - Web server received an invalid response while acting as a gateway or proxy server."
I have tried to do some tracing in IIS but don't seem to get any results. Can anyone shed any light on how to resolve this issue so I don't have to tear any more of my hair out!
Thanks in advanceHi RicoE,
On current situation, please go to
Microsoft Remote Connectivity Analyzer and run a test, then monitor the result.
In addition, please refer to Post-installation tasks section in following article, then check if correctly
set up an on-premises server that is running Exchange Server on a Windows Server Essentials network.
Integrate an On-Premises Exchange Server
with Windows Server Essentials
Please also refer to following KB and check if can help you.
FIX: ARR does not route requests correctly when you use the
ARR module in IIS 7.0
By the way, please use the
Configuration Troubleshooter tool that Robert created to check IIS and Certificates.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
ICloud Server Error: Can't add/edit contacts + it overwrites AddressBook edits
I originally posted this in the MobileMe forum. I am totally frustrated and disgusted with the unreliable and buggy iCloud. I am hoping smarter people than me can help resolve this. Thank you.
My primary data source is/was my MacBook Pro. It was all synced to MobileMe. (Contacts and iCal). iCloud came along. I "upgraded" to iCloud {the frustrating process of "your account needs to be upgraded, create an appleID..." was a whole different pain}.
To make life simple, I even allowed iCloud to be the source of data for my iMac as well as iPhone 4 and iPhone 4S by deleting everything and letting everything be populated from iCloud. Now, supposedly, all my contacts and calendar/reminder data is in iCloud and all the data on the iMac and iPhones if from iCloud.
Except, I cannot make edits to contacts in iCloud or even Add a new contact. When I Add or Save an edit in iCloud, EACH time I get an ERROR and the error report going to Apple is given below.
Worse, I spent an hour cleaning up the freshly downloaded contacts in the iMac's AddressBook. NONE of those changes went up to iCloud.
EVEN worse, iCloud overwrote the changed fields back to the old/blank fields, wasting my hour of work.
Adding cards in AddressBook on the computer also does not propagate to iCloud, though edits to or changes to iCal DO show up in iCloud. But, adds/deletes/edits to Contacts on iMac OR iPhones do NOT show up in iCloud.
Your help appreciated. Regards,
Imran
===
This is from the iMac console when I tried to delete a contact:
11/20/11 6:05:09.289 AM Address Book: Process com.apple.AddressBook deleting 1 contact
11/20/11 6:05:10.045 AM Address Book: [CardDAVPlugin-ERROR] -getHomeInfo:[_controller containersAtURLs:{(
https://MYNAME%[email protected]:443/########/carddavhome///MYNAME%[email protected]:443/########/carddavhome/
)}] Error Domain=CoreDAVErrorDomain Code=1 "The operation couldn’t be completed. (CoreDAVErrorDomain error 1.)"
The rest of the log is at: https://discussions.apple.com/thread/3508969 and not repeated here.I added this comment to a thread about trying to get rid of iCloud once it has been used... it is much harder than you'd imagine... I am sharing it here because it includes steps I took after the problem we are discussing above....
====
I love Apple since it started and been a Mac user since it came out. Much that MobileMe was frustrating and had a lousy launch, I thought it was impossible to make something worse than MobileMe. Apple succeeded with this disaster, data destroying, heart burning, stomach churning and hours wasting beast called iCloud.
See iCloud Server Error: Can't add/edit contacts + it overwrites AddressBook edits By IMRAN Happy to have your thoughts on how to solve that nightmare. My last attempt (manually restorying my 5000 contacts in AddressBook, then painfully manually deleting contacts in iCloud {Select All > Delete there gives Server Errors also}. Finally managed. Then resyncing the MacBook Pro to iCloud led to 1000 contacts NOT syncing and no way except manually listing each address list side by side to figure out which ones it missed pulling in. Horror. Disaster. Shame.
For the user who says that turning off iCloud on the Mac and accepting its offer to delete data will delete data only on the cloud, sorry, but, unless I misunderstood you, that is dangerously wrong.
Like an evil spawn of SkyNet and a PC Boot Sector Virus, once iCloud has grabbed your data IT becomes the master of your data, your digital life. Deleting stuff means the stuff on your DEVICE (e.g. MacBook Pro, where you created and have all the ORIGINAL data in that iCloud sucked in) is what will be destroyed. Be careful.
If you're playing with this beast, not only make backups of your data in AddressBook and iCal, but invest in an external drive and clone your whole hard drive.
I am literally having to make a decision tonight, keep my MacBook Pro as the master, and sync via iTunes to the iPhone 4S and 4. I have an iMac mostly for music and video, which it was "cool" to have synced iCal and AB on, though not regularly used. But, after the hours wasted with iCloud, and the repeated data loss, I can live without the iMac being a synced device.
Hope this helps.
Regards
Imran Anwar -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006
Hi Willy,
Welcome to Apple Support Communities.
The article below provides information about specific update and restore alerts, including the 9006 alert that you saw when attempting to update your iPad 2 to iOS 8.1. Try using the instructions provided to see if the issue is caused by a conflict with the security software on your computer.
Resolve iOS update and restore errors
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
I hope this helps,
-Jason -
Cannot Install Sql Server 2008, Gives The Error "Database Engine Services Failed"
I cannot install Sql Server 2008 R2 on Windows 8. Tried many times but failed because it gives the error "Database
Engine Services Failed". Sql files cannot be corrupted because i can install the same setup on Windows 7 and i can connect to databases.
I tried all the things below;
* I'm uninstalling everything related with Sql Server from Control Panel/Programs And Features.
* I'm deleting all the keys related with Sql Server from Regedit.
* Later i'm restarting windows, and trying to install again. But during the install it gives the error "Database
Engine Services Failed", install is finishing but when i opened the Management Studio i cannot connect to Database Engine with Sa naturally.
* My firewall is already closed. And i have not any antivirus software.
* I gave the permission for port 1433 on firewall.
Please help me. Why i always take "Database Engine Services Failed" error? I will get crazy cause of that for many days.Here's the ERRORLOG file which i found under the folder;
Microsoft SQL Server/MSSQL10_50.MSSQLSERVER/MSSQL/Log.
2014-09-27 03:39:40.15 Server Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (X64)
Apr 2 2010 15:48:46
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
2014-09-27 03:39:40.15 Server (c) Microsoft Corporation.
2014-09-27 03:39:40.15 Server All rights reserved.
2014-09-27 03:39:40.15 Server Server process ID is 5768.
2014-09-27 03:39:40.15 Server System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '350V5C/350V5X/350V4C/350V4X/351V5C/351V5X/351V4C/351V4X/3540VC/3540VX/3440VC/3440VX'.
2014-09-27 03:39:40.15 Server Authentication mode is MIXED.
2014-09-27 03:39:40.15 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-09-27 03:39:40.15 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-09-27 03:39:40.15 Server Command Line Startup Parameters:
-m SqlSetup
-f
-Q
-q Turkish_CI_AS
-T 4022
-T 4010
-T 3659
-T 3610
2014-09-27 03:39:40.18 Server Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically. After
the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
2014-09-27 03:39:40.18 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-09-27 03:39:40.18 Server Detected 4 CPUs. This is an informational message; no user action is required.
2014-09-27 03:39:40.31 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-09-27 03:39:40.32 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-09-27 03:39:40.43 Server Node configuration: node 0: CPU mask: 0x000000000000000f:0 Active CPU mask: 0x000000000000000f:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-09-27 03:39:40.45 Server Support for distributed transactions was not enabled for this instance of the Database Engine because it was started using the minimal configuration option. This is an informational message only. No user action
is required.
2014-09-27 03:39:40.45 spid7s Warning ******************
2014-09-27 03:39:40.45 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-09-27 03:39:40.46 spid7s Starting up database 'master'.
2014-09-27 03:39:40.52 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-09-27 03:39:40.58 spid7s SQL Server was started using the -f flag. SQL Server Audit is disabled. This is an informational message. No user action is required.
2014-09-27 03:39:40.59 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2014-09-27 03:39:40.59 spid7s Server started with '-f' option. Auditing will not be started. This is an informational message only; no user action is required.
2014-09-27 03:39:40.59 spid7s Starting up database 'mssqlsystemresource'.
2014-09-27 03:39:40.61 spid7s The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
2014-09-27 03:39:40.94 spid7s Password policy update was successful.
2014-09-27 03:39:40.94 spid8s Starting up database 'model'.
2014-09-27 03:39:40.95 spid7s Server name is 'CAGATAY'. This is an informational message only. No user action is required.
2014-09-27 03:39:41.21 spid8s Clearing tempdb database.
2014-09-27 03:39:41.21 spid10s A new instance of the full-text filter daemon host process has been successfully started.
2014-09-27 03:39:41.24 Server A self-generated certificate was successfully loaded for encryption.
2014-09-27 03:39:41.24 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
2014-09-27 03:39:41.24 Server Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag
7806. This is an informational message only. No user action is required.
2014-09-27 03:39:41.28 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication
to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2014-09-27 03:39:41.28 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2014-09-27 03:39:41.70 spid8s Starting up database 'tempdb'.
2014-09-27 03:39:41.86 spid7s Warning ******************
2014-09-27 03:39:41.86 spid7s Attempting to change default collation to Turkish_CI_AS.
2014-09-27 03:39:41.92 spid7s index restored for master.syspriorities.
2014-09-27 03:39:41.95 spid7s index restored for master.sysbrickfiles.
2014-09-27 03:39:41.96 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:41.96 spid7s index restored for master.sysowners.
2014-09-27 03:39:42.13 spid7s index restored for master.sysdbreg.
2014-09-27 03:39:42.16 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.16 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.16 spid7s index restored for master.sysschobjs.
2014-09-27 03:39:42.17 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.17 spid7s index restored for master.syscolpars.
2014-09-27 03:39:42.17 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.18 spid7s index restored for master.sysxlgns.
2014-09-27 03:39:42.18 spid7s index restored for master.sysxsrvs.
2014-09-27 03:39:42.18 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.18 spid7s index restored for master.sysnsobjs.
2014-09-27 03:39:42.18 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.18 spid7s index restored for master.syscerts.
2014-09-27 03:39:42.19 spid7s index restored for master.sysrmtlgns.
2014-09-27 03:39:42.19 spid7s index restored for master.sysxprops.
2014-09-27 03:39:42.19 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.19 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.31 spid7s index restored for master.sysscalartypes.
2014-09-27 03:39:42.31 spid7s index restored for master.sysidxstats.
2014-09-27 03:39:42.31 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.32 spid7s index restored for master.sysendpts.
2014-09-27 03:39:42.32 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.32 spid7s index restored for master.sysclsobjs.
2014-09-27 03:39:42.32 spid7s index restored for master.sysremsvcbinds.
2014-09-27 03:39:42.32 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.32 spid7s index restored for master.sysrts.
2014-09-27 03:39:42.33 spid7s index restored for master.sysasymkeys.
2014-09-27 03:39:42.33 spid7s index restored for master.syssqlguides.
2014-09-27 03:39:42.44 spid7s index restored for master.syssoftobjrefs.
2014-09-27 03:39:42.47 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.48 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.49 spid7s index restored for master.spt_values.
2014-09-27 03:39:42.49 spid7s index restored for master.MSreplication_options.
2014-09-27 03:39:42.56 spid7s index restored for tempdb.syspriorities.
2014-09-27 03:39:42.56 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.57 spid7s index restored for tempdb.sysowners.
2014-09-27 03:39:42.57 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.57 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.57 spid7s index restored for tempdb.sysschobjs.
2014-09-27 03:39:42.57 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.59 spid7s index restored for tempdb.syscolpars.
2014-09-27 03:39:42.60 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.60 spid7s index restored for tempdb.sysnsobjs.
2014-09-27 03:39:42.60 spid7s index restored for tempdb.syscerts.
2014-09-27 03:39:42.60 spid7s index restored for tempdb.sysxprops.
2014-09-27 03:39:42.60 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.60 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.60 spid7s index restored for tempdb.sysscalartypes.
2014-09-27 03:39:42.61 spid7s index restored for tempdb.sysidxstats.
2014-09-27 03:39:42.61 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.61 spid7s index restored for tempdb.sysclsobjs.
2014-09-27 03:39:42.61 spid7s index restored for tempdb.sysremsvcbinds.
2014-09-27 03:39:42.61 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.61 spid7s index restored for tempdb.sysrts.
2014-09-27 03:39:42.62 spid7s index restored for tempdb.sysasymkeys.
2014-09-27 03:39:42.69 spid7s index restored for tempdb.syssqlguides.
2014-09-27 03:39:42.69 spid7s index restored for tempdb.syssoftobjrefs.
2014-09-27 03:39:42.75 spid7s index restored for model.syspriorities.
2014-09-27 03:39:42.75 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.75 spid7s index restored for model.sysowners.
2014-09-27 03:39:42.76 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.76 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.76 spid7s index restored for model.sysschobjs.
2014-09-27 03:39:42.76 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.00 spid7s index restored for model.syscolpars.
2014-09-27 03:39:43.00 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.00 spid7s index restored for model.sysnsobjs.
2014-09-27 03:39:43.00 spid7s index restored for model.syscerts.
2014-09-27 03:39:43.00 spid7s index restored for model.sysxprops.
2014-09-27 03:39:43.00 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.00 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.00 spid7s index restored for model.sysscalartypes.
2014-09-27 03:39:43.00 spid7s index restored for model.sysidxstats.
2014-09-27 03:39:43.01 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.01 spid7s index restored for model.sysclsobjs.
2014-09-27 03:39:43.01 spid7s index restored for model.sysremsvcbinds.
2014-09-27 03:39:43.01 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.01 spid7s index restored for model.sysrts.
2014-09-27 03:39:43.01 spid7s index restored for model.sysasymkeys.
2014-09-27 03:39:43.01 spid7s index restored for model.syssqlguides.
2014-09-27 03:39:43.01 spid7s index restored for model.syssoftobjrefs.
2014-09-27 03:39:43.02 spid7s Starting up database 'msdb'.
2014-09-27 03:39:43.82 spid7s index restored for msdb.syspriorities.
2014-09-27 03:39:43.85 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.93 spid7s index restored for msdb.sysowners.
2014-09-27 03:39:43.99 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.00 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.09 spid7s index restored for msdb.sysschobjs.
2014-09-27 03:39:44.12 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.20 spid7s index restored for msdb.syscolpars.
2014-09-27 03:39:44.20 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.20 spid7s index restored for msdb.sysnsobjs.
2014-09-27 03:39:44.20 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.25 spid7s index restored for msdb.syscerts.
2014-09-27 03:39:44.25 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.26 spid7s index restored for msdb.sysxprops.
2014-09-27 03:39:44.26 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.26 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.27 spid7s index restored for msdb.sysscalartypes.
2014-09-27 03:39:44.37 spid7s index restored for msdb.sysidxstats.
2014-09-27 03:39:44.41 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.42 spid7s index restored for msdb.sysclsobjs.
2014-09-27 03:39:44.42 spid7s index restored for msdb.sysremsvcbinds.
2014-09-27 03:39:44.42 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.42 spid7s index restored for msdb.sysrts.
2014-09-27 03:39:44.54 spid7s index restored for msdb.sysasymkeys.
2014-09-27 03:39:44.54 spid7s index restored for msdb.syssqlguides.
2014-09-27 03:39:44.59 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.74 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.85 spid7s index restored for msdb.syssoftobjrefs.
2014-09-27 03:39:44.89 spid7s index restored for msdb.syspolicy_policies_internal.
2014-09-27 03:39:44.90 spid7s index restored for msdb.sysproxies.
2014-09-27 03:39:44.90 spid7s index restored for msdb.syscollector_execution_stats_internal.
2014-09-27 03:39:44.90 spid7s index restored for msdb.syssubsystems.
2014-09-27 03:39:44.91 spid7s index restored for msdb.log_shipping_primary_secondaries.
2014-09-27 03:39:44.91 spid7s index restored for msdb.sysdownloadlist.
2014-09-27 03:39:44.91 spid7s index restored for msdb.log_shipping_monitor_primary.
2014-09-27 03:39:44.92 spid7s index restored for msdb.sysoriginatingservers.
2014-09-27 03:39:44.93 spid7s index restored for msdb.log_shipping_monitor_history_detail.
2014-09-27 03:39:44.95 spid7s index restored for msdb.log_shipping_monitor_error_detail.
2014-09-27 03:39:44.95 spid7s index restored for msdb.log_shipping_secondary.
2014-09-27 03:39:44.97 spid7s index restored for msdb.log_shipping_secondary_databases.
2014-09-27 03:39:45.10 spid7s index restored for msdb.log_shipping_monitor_secondary.
2014-09-27 03:39:45.10 spid7s index restored for msdb.sysjobs.
2014-09-27 03:39:45.10 spid7s index restored for msdb.sysutility_ucp_mi_file_space_health_internal.
2014-09-27 03:39:45.10 spid7s index restored for msdb.sysutility_ucp_mi_database_health_internal.
2014-09-27 03:39:45.10 spid7s index restored for msdb.syscollector_blobs_internal.
2014-09-27 03:39:45.11 spid7s index restored for msdb.sysutility_mi_dac_execution_statistics_internal.
2014-09-27 03:39:45.11 spid7s index restored for msdb.sysjobsteps.
2014-09-27 03:39:45.11 spid7s index restored for msdb.sysutility_ucp_dac_file_space_health_internal.
2014-09-27 03:39:45.11 spid7s index restored for msdb.logmarkhistory.
2014-09-27 03:39:45.11 spid7s index restored for msdb.sysutility_mi_session_statistics_internal.
2014-09-27 03:39:45.12 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.12 spid7s index restored for msdb.sysdtscategories.
2014-09-27 03:39:45.33 spid7s index restored for msdb.syspolicy_target_sets_internal.
2014-09-27 03:39:45.33 spid7s index restored for msdb.sysutility_ucp_mi_volume_space_health_internal.
2014-09-27 03:39:45.33 spid7s index restored for msdb.sysschedules.
2014-09-27 03:39:45.33 spid7s index restored for msdb.sysdac_instances_internal.
2014-09-27 03:39:45.33 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.50 spid7s index restored for msdb.sysssispackages.
2014-09-27 03:39:45.51 spid7s index restored for msdb.sysutility_ucp_computer_cpu_health_internal.
2014-09-27 03:39:45.51 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.52 spid7s index restored for msdb.sysssispackagefolders.
2014-09-27 03:39:45.52 spid7s index restored for msdb.sysdac_history_internal.
2014-09-27 03:39:45.53 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.62 spid7s index restored for msdb.syscategories.
2014-09-27 03:39:45.62 spid7s index restored for msdb.systargetservers.
2014-09-27 03:39:45.62 spid7s index restored for msdb.systargetservergroups.
2014-09-27 03:39:45.62 spid7s index restored for msdb.syspolicy_policy_category_subscriptions_internal.
2014-09-27 03:39:45.62 spid7s index restored for msdb.sysalerts.
2014-09-27 03:39:45.62 spid7s index restored for msdb.sysoperators.
2014-09-27 03:39:45.63 spid7s index restored for msdb.syspolicy_system_health_state_internal.
2014-09-27 03:39:45.63 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.63 spid7s index restored for msdb.syscollector_config_store_internal.
2014-09-27 03:39:45.65 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.65 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.65 spid7s index restored for msdb.sysmanagement_shared_server_groups_internal.
2014-09-27 03:39:45.66 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.66 spid7s index restored for msdb.sysutility_mi_smo_properties_to_collect_internal.
2014-09-27 03:39:45.66 spid7s index restored for msdb.sysmanagement_shared_registered_servers_internal.
2014-09-27 03:39:45.66 spid7s index restored for msdb.syscachedcredentials.
2014-09-27 03:39:45.79 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.79 spid7s index restored for msdb.syscollector_collection_sets_internal.
2014-09-27 03:39:45.79 spid7s index restored for msdb.sysutility_ucp_dac_health_internal.
2014-09-27 03:39:45.80 spid7s index restored for msdb.MSdbms.
2014-09-27 03:39:45.80 spid7s index restored for msdb.MSdbms_datatype.
2014-09-27 03:39:45.80 spid7s index restored for msdb.sysmail_profile.
2014-09-27 03:39:45.80 spid7s index restored for msdb.sysutility_ucp_managed_instances_internal.
2014-09-27 03:39:45.83 spid7s index restored for msdb.syspolicy_management_facets.
2014-09-27 03:39:45.84 spid7s index restored for msdb.sysutility_ucp_mi_health_internal.
2014-09-27 03:39:45.86 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.86 spid7s index restored for msdb.syscollector_collector_types_internal.
2014-09-27 03:39:45.86 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.86 spid7s index restored for msdb.syspolicy_configuration_internal.
2014-09-27 03:39:45.87 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.87 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.87 spid7s index restored for msdb.syspolicy_facet_events.
2014-09-27 03:39:45.87 spid7s index restored for msdb.sysmail_account.
2014-09-27 03:39:45.87 spid7s index restored for msdb.syspolicy_conditions_internal.
2014-09-27 03:39:45.88 spid7s index restored for msdb.sysutility_ucp_health_policies_internal.
2014-09-27 03:39:45.88 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.88 spid7s index restored for msdb.syscollector_collection_items_internal.
2014-09-27 03:39:45.90 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:46.00 spid7s index restored for msdb.sysmail_servertype.
2014-09-27 03:39:46.00 spid7s index restored for msdb.sysutility_ucp_filegroups_with_policy_violations_internal.
2014-09-27 03:39:46.02 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:46.03 spid7s index restored for msdb.sysutility_ucp_policy_check_conditions_internal.
2014-09-27 03:39:46.03 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:46.03 spid7s index restored for msdb.sysutility_ucp_configuration_internal.
2014-09-27 03:39:46.03 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:46.03 spid7s index restored for msdb.sysutility_ucp_policy_target_conditions_internal.
2014-09-27 03:39:46.04 spid7s index restored for msdb.sysmail_server.
2014-09-27 03:39:46.04 spid7s index restored for msdb.syspolicy_policy_categories_internal.
2014-09-27 03:39:46.04 spid7s index restored for msdb.syspolicy_object_sets_internal.
2014-09-27 03:39:46.04 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:46.05 spid7s index restored for msdb.sysmail_configuration.
2014-09-27 03:39:46.05 spid7s index restored for msdb.sysdbmaintplan_databases.
2014-09-27 03:39:46.05 spid7s index restored for msdb.log_shipping_primary_databases.
2014-09-27 03:39:46.39 spid7s The default collation was successfully changed.
2014-09-27 03:39:46.39 spid7s Recovery is complete. This is an informational message only. No user action is required.
2014-09-27 03:39:47.17 spid51 Changed database context to 'master'.
2014-09-27 03:39:47.18 spid51 Changed language setting to us_english.
2014-09-27 03:39:47.72 spid51 Setting database option RECOVERY to FULL for database model.
2014-09-27 03:39:47.84 spid51 Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
2014-09-27 03:39:47.84 spid51 FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2014-09-27 03:39:47.98 spid51 Configuration option 'default language' changed from 0 to 0. Run the RECONFIGURE statement to install.
2014-09-27 03:39:47.98 spid51 Configuration option 'default full-text language' changed from 1033 to 1033. Run the RECONFIGURE statement to install.
2014-09-27 03:39:47.98 spid51 FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2014-09-27 03:39:47.98 spid51 Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.
2014-09-27 03:39:47.98 spid51 FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2014-09-27 03:39:48.27 spid51 Error: 15007, Severity: 16, State: 1.
2014-09-27 03:39:48.27 spid51 '' is not a valid login or you do not have permission.
2014-09-27 03:51:25.13 Logon Error: 18456, Severity: 14, State: 8.
2014-09-27 03:51:25.13 Logon Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
2014-09-27 03:51:32.67 Logon Error: 18456, Severity: 14, State: 8.
2014-09-27 03:51:32.67 Logon Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
2014-09-27 03:51:42.11 Logon Error: 18456, Severity: 14, State: 5.
2014-09-27 03:51:42.11 Logon Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
2014-09-27 03:52:42.07 Logon Error: 18456, Severity: 14, State: 5.
2014-09-27 03:52:42.07 Logon Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
2014-09-27 03:53:01.23 Logon Error: 18461, Severity: 14, State: 1.
2014-09-27 03:53:01.23 Logon Login failed for user 'CAGATAY\cagatay'. Reason: Server is in single user mode. Only one administrator can connect at this time. [CLIENT: <local machine>]
2014-09-27 03:53:17.57 Logon Error: 18456, Severity: 14, State: 8.
2014-09-27 03:53:17.57 Logon Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
2014-09-27 03:53:32.54 Logon Error: 18456, Severity: 14, State: 5.
2014-09-27 03:53:32.54 Logon Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
2014-09-27 03:54:04.29 Logon Error: 18456, Severity: 14, State: 5.
2014-09-27 03:54:04.29 Logon Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
2014-09-27 03:54:10.36 Logon Error: 18456, Severity: 14, State: 5.
2014-09-27 03:54:10.36 Logon Login failed for user 'CAGATAY\cagatay'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
2014-09-27 03:54:47.18 Logon Error: 18456, Severity: 14, State: 8.
2014-09-27 03:54:47.18 Logon Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
Resolve the error, please refer to the following links.
Enable DAC:http://www.mssqltips.com/sqlservertip/2538/enabling-dedicated-administrator-connection-in-sql-server-2008-express-edition/
could not register the SPN Kerberos:
http://saveadba.blogspot.com/2012/03/could-not-register-spn-kerberos.html
Make sure the password of sa is correct,and the login 'CAGATAY\cagatay' has been created in SQL Server -
Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you
If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.
-
I cloud gives me the following message when I try and log in "you can't log in because of a server error" any ideas?
Hi spillgar,
If you are having issues signing in to iCloud from your Windows machine, you may find the following articles helpful:
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
iCloud: If you can’t sign in to iCloud.com
http://support.apple.com/kb/ph2611
Regards,
- Brenden -
Opening attachments gives the error : "The connection was reset. The connection to the server was reset. I tried clearing cookies and cache, but it doesnot work. 8 out of 10 times this is happenning. It's reproducible, and happening only after the latest update.
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
You can also try to reset (power off/on) the router. -
Dear Friends, My Iphone 4s is stuck in recovery mode while trying to update to iso 6. I tried restoring it but unable to do so. gives me error 36 and goes back to recovery mode. I tried all the steps but no luck. anyone? Please Help!!
This writeup comes from the article referenced below it:
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1 -
Scheduler Configuration page gives 500 Internal Server Error
Hello,
I have BI Publisher 10.1.3.4.1 installed. Now Scheduler Configuration_ page under System Maintenance is not coming. Giving below message.
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
I checked the log (/oc4j_bi/j2ee/home/application-deployments/xmlpserver/application.log), it gives below errors.
at java.lang.Thread.run(Thread.java:595)
12/05/07 19:41:33.80 xmlpserver: Servlet error
java.lang.NullPointerException
at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.getPlatformFromClasses(SchedulerConfigPage.java:1097)
at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.render(SchedulerConfigPage.java:491)
at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.doPost(SchedulerConfigPage.java:206)
at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.doGet(SchedulerConfigPage.java:162)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:94)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
can anyone help me on this.Hi
Shutdown apps tier, run autoconfig. On database tier run autoconfig. Cleanly shutdown all, restart all in sequence. Error because some of the os processes are hanging. Nothing to worry. -
unable to restore my iphone 4 screen is black and gives me error code 1600! how can i resolve this issue?
Sounds like your iPhone is stuck in DFU Mode. Try this, open iTunes on computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click the Restore button of iTunes. If still problem, you may need to search the Web for help of DFU Mode Loop.
Here are the Steps to fix Error 1600 directly from Apple:
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Maybe you are looking for
-
Lenovo toolbox and fingerprint software stopped working on Thinkpad W700 Windows 7 Pro 64 bit
After installing Lenovo Updates an unknown USB device appeared in device manager. Per the instructions of a Lenovo support person I performed a system restore to a time prior to the updates. After doing that the Lenovo Toolbox and Fingerprint softwar
-
Says active online - "no service" on device??
I would love if someone could help me with this. So I bought an iphone4 yesterday. My verizon account was "on hold" while i was out of a phone for 2 months, so I unsuspended my account, added the MEID for my new phone -- everything says it is now act
-
I purchased acrobat XI standard and tried to install on my wife's desktop. When I couldn't seem to get it to install.(it would repeatedly stall during the installation) I thought perhaps it was her computer so I tried to install on my laptop. It seem
-
I'm running Oracle Service Bug 11gR1 PS3 (11.1.1.4). At installation I choose the domain extension options to enable for OWSM and also included EM to act as an OWSM, but in Proxy service i am not able to see policy tab. Please suggest me that any con
-
Elements 11 not responding when using "comic" or "graphic novel" filter
I recently purchased PSE 11 and absolutely LOVE the program. It has worked flawlessly for me for 3 weeks, however, today was the first time I ever tried to use the "comic strip" filter and the "graphic novel" filter and the program stopped responding