SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity. No windows identity for domain\user.

Hi,
We get plenty of error messages:
SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity.
No windows identity for domain\user.
Our SharePoint 2010 environment consists of 2 app and 2 front end servers. We have plenty of SPSecurityContext.WindowsIdentity errors in our SharePoint logs. I found that this is related to C2WTS service. We have this service running under Local System account
and only running on both Front-end servers. We are not using Kerberos in our environment.
My question is should this service be configured with domain account even we are not using Kerberos?
Also should this server be started on App sharepoint servers?
Is any other way to prevent those errors?
Thank you,

Since local accounts are unable to query the domain, and I suspect that the Local System account uses a virtual local account (as opposed to the computer's domain account), then the same would apply to your C2WTS.
Yes, configure a domain account (DEDICATED, since C2WTS requires some VERY elevated privileges), and the C2WTS will be able to do all of its domain lookups.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Similar Messages

Error: SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity for NTName='

I'm getting the following error, but it only seems to happen with my 'admin' id. At our company we have a regular user id that we use for daily use that has our email attached to it, and then we have an admin id that has elevated privileges on the
various systems.
I haven't found any trace of this error appearing for anyone else in the system, only for my Admin id. I don't know if it has something to do with not having an Exchange account set up for it, or if there is something else missing. In searching
for this error I can find lots of references to Kerberos, but we don't have that running at this company. I'm not sure why it says Kerberos in the error message.
Any ideas?
THanks.
Ted
P.S. Here is the error:
SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity for NTName='Domain\ID', UPN='[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]:
WTS0003: The caller is not authorized to access the service. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.UnauthorizedAccessException: WTS0003: The caller is not authorized to access
the service.
at Microsoft.IdentityModel.WindowsTokenService.CallerSecurity.CheckCaller(WindowsIdentity callerIdentity)
at Microsoft.IdentityModel.WindowsTokenService.S4UServiceContract.PerformLogon(Func`1 logonOperation, Int32 pid)
at SyncInvokeUpnLogon(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet))..

Hi Ted,
What operations(e.g. create a site?) are your performing with your "admin" account, when you are getting this error?
Please check the following article with similar posts, e.g. grant the admin account proper permissions, or modify the config file (please back up the original file in a safe place for recovery in future), etc., let us know results.
http://onefootinthecloud.blogspot.jp/2012/01/save-template-error-no-windows-identity.html
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/efb39291-857c-4a85-b244-56712f11430a/sharepoint-2010-migrated-to-claims-strange-error?forum=sharepointadminprevious
https://social.technet.microsoft.com/Forums/sharepoint/en-US/b4d06b64-a713-480e-a00c-d02a466ad891/claims-to-windows-token-issue?forum=sharepointadminprevious
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Could not retrieve a valid windows identity - access is denied

Background:
We have a reporting solution based on SQL Server 2012 SP1 running on Server 2008 R2. Users access the solution through SharePoint 2013. We have several hundred users and all is well with the exception of 2 users.
Problem:
When these 2 users try and open a SSRS report they receive an error. The entry is the SharePoint log reads:
SPSecurityContext.WindowsIdentity: Could not retrieve a valid
windows identity for NTName='domain\username', UPN='[email protected]'.
UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.Security.SecurityAccessDeniedException: Access is denied.
Other details (thoughts):
We are confident that Kerberos and C2WTS are set up and working correctly (we have a couple of hundred users working).
We suspect it may be Active Directory related but can find nothing that sets the users apart from everyone else.
Has anyone any suggestions to resolve this?

Hi Robin,
If you have a One Way Transitive Trust setup between the domain, where the Windows Services reside, and the other domain where the users reside. Then please refer to the link below and set two-way trusts:
http://blogs.msdn.com/b/psssql/archive/2012/08/20/sharepoint-adventures-reporting-services-claims-and-one-way-trusts.aspx
If not, then some users could access Excel Services while others could not, the issue might be caused by credentials. Please refer to the link below:
http://blogs.msdn.com/b/rodneyviana/archive/2011/07/19/troubleshooting-claims-to-windows-nt-token-service-c2wts-in-sharepoint-2010-may-be-difficult-if-you-don-t-know-where-to-start.aspx
Please try narrowing down the issue and test if only internal machine works. More information about the error message:
http://blogs.msdn.com/b/andrasg/archive/2010/05/04/setting-up-sharepoint-2010-excel-services-to-get-external-data.aspx
Regards,
Rebecca Tu
TechNet Community Support

Claims debacle (error) with Term Store: "Could not retrieve a valid windows identity" for all sites in a particular web app.

When I pull up the Term store in CA or any MySite collection, it works.
When I do so in any other site collection (HNSCs, incidentally), It doesn't return any term stores.
My ULS log immediately before and after the "/_vti_bin/taxonomyinternalservice.json/CheckPermission" POST on termstore .aspx triggers the WCF call:
Claims Authentication af30y Verbose Claims Windows Sign-In: Successfully signed-in the the user 'contoso\domainUser' for request url 'https://sp13-root-prd.contoso.com/_vti_bin/taxonomyinternalservice.json/CheckPermission'.
Claims Authentication af30q Verbose Updating header 'LOGON_USER' with value '0#.w|contoso\domainUser' for the request url 'https://sp13-root-prd.contoso.com/_vti_bin/taxonomyinternalservice.json/CheckPermission'.
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|contoso\domainUser, ClaimsCount=77
Logging Correlation Data xmnv Medium Site=/
Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://CONTOSOFE3:32843/00e6d55691824965ac223f1d1cfae6d2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges2' MessageId: 'urn:uuid:590e916c-c89a-4f89-9819-a82c97fabcaa'
Claims Authentication bz7l Medium SPSecurityContext: Could not retrieve a valid windows identity for username 'contoso\domainUser' with UPN '[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: WTS0003: The caller is not authorized to access the service. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.UnauthorizedAccessException: WTS0003: The caller is not authorized to access the service. at Microsoft.IdentityModel.WindowsTokenService.CallerSecurity.CheckCaller(WindowsIdentity callerIdentity) at Microsoft.IdentityModel.WindowsTokenService.S4UServiceContract.PerformLogon(Func`1 logonOperation, Int32 pid) at SyncInvokeUpnLogon(Object , Object[] , Object[] ) at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc) at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet))..
Claims Authentication g220 Unexpected No windows identity for contoso\domainUser.
The "The caller is not authorized to access the service." message seems pertinent.
Both web apps are using only NTLM auth.
The url for both web apps ends in the same contoso.com domain.
I get the same errors no matter what account I use, including the install account.
Things I've tried:
Deleting and building a new HNSC root web app and site. Error happens in all sites in all web apps except the PBSC hosting MySites.
Giving the root site app pool identity full control of the metadata service app (even though the MySite identitiy doesn't have it)
Giving the root site app pool identity full permissions on the metadata service app.
Comparing database and web app config permissions between dev (where everything works perfectly) and prod (where it does not).
Made sure IIS auth settings on both sites are identical
Both sites are using the same SSL certificate (though the call to the web service appears to be http)
Reprovisioned the metadata service app with a new database and new app pool identity.
Made sure C2WT is running. Tried it with the service stopped as well.
Web.configs are identical between working and non-working apps.
I'm stumped but still Googling. I'm hoping to avoid having to call Micrososft. Any help would be appreciated!
UPDATE:
Interestingly, when I restored the web application from backup (via CA), I ended up with 3 identical "Windows Authentication" authentication providers assigned to the problem web app. Since there was more than one, I was directed to the provider-chooser
page when visiting the site. Upon choosing 1 of the 3, I was authenticated, and *poof*, no more authentication errors and the term store loaded term sets as expected.
Of course, 3 providers was not an ideal state, so I grabbed the one that worked (#1) via get-spauthenticationprovider, and assigned it to the web app via set-spwebapplication, and my problem returned.
I am currently updating the farm to SP1 from June 2013 CU. Fingers crossed.
Update:
The update to SP1 went smoothly, but did not resolve the issue. Also related (I believe) are the random authentication errors when trying to upload images to some libraries, and 401-errors on the accessdenied.aspx page itself.
Update:
The problem is resolved, seemingly after making 4 changes. I'm trying to narrow down which change was the cure, if any:
I installed SP1 on all 6 servers, rebooted and upgraded. This appeared to have no effect.
Removed an old login from SQL that no longer existed in AD because of this ULS error:
System.Runtime.InteropServices.COMException: The user or group contoso\svc_xxxxxxxxx' is unknown., StackTrace: at Microsoft.SharePoint.Utilities.SPUtility.GetFullNameFromLoginEx(String loginName, Boolean&
bIsDL)
This login was the identity of the application pool that used to run the web app in question.
This login was the schema owner of a schema named after itself on every SharePoint database so I changed the schema owner to dbo but left the schema attached.
The problem may have surfaced initially when the app pool identity was changed in CA, but went unnoticed?
Note that the web app had been deleted and recreated many times with a new identity and pool to no avail, but the URL remained the same throughout each attempted fix. Relevant?
Grasping at straws, I changed the app pool identity for this web app to the same one that runs the MySite web app pool as per this only slightly related problem: http://www.planetsharepoint.org/m/preview.php?id=372&rid=34764&author=Vlad+Catrinescu
I changed the authentication method from NTLM to Negotiate.
I am rolling back #3 and #4 to see if the issue resurfaces.
Update:
It doesn't appear to have been the NTLM/Negotiate setting. Web app is currently set to NTLM and all is well. No strange accessdenies, and term Store is still manageable from all sites.
Update: Sorry for the delay. I am administering 6 farms these days. Will update as soon as the final phase of rollbacks happens.
I think I can. I think I can.

maybe that web app was accidentally created with classic auth?
here's an example of how to create claims based, with classic, and then "doing 2013" claims
#Create the example web application, as mentioned above, either with gui, and pick later, or
New-SPWebApplication-ApplicationPool$applicationPool-ApplicationPoolAccount$serviceAcct-Name$WebApp-Port
5050
-databaseName$contentDB-securesocketslayer
#If doing for 2013
New-SPWebApplication-ApplicationPool$applicationPool-ApplicationPoolAccount$serviceAcct-Name$WebApp-Port
5050
-AuthenticationProvider(new-spauthenticationprovider)
-databaseName$contentDB-secureSocketsLayer

ERROR: Could not retrieve a valid windows identity

When I try to create PowerView reports from BISM connection file, I get error:
<MoreInformation>
<Source>Microsoft.ReportingServices.ProcessingCore</Source>
<Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'TemporaryDataSource'.</Message>
<MoreInformation>
<Source>Microsoft.AnalysisServices.AdomdClient</Source>
<Message/>
<MoreInformation>
<Source>Microsoft.SharePoint</Source>
<Message>Could not retrieve a valid Windows identity.</Message>
<MoreInformation>
<Source>mscorlib</Source>
<Message>WTS0003: The caller is not authorized to access the service.</Message>
</MoreInformation>
</MoreInformation>
</MoreInformation>
</MoreInformation>
From SharePoint logs: I get following exception details:
01/02/2013 11:00:34.17            w3wp.exe (0x0828)        0x2AEC SharePoint Foundation Claims Authentication
bz7l        Medium
SPSecurityContext: Could not retrieve a valid windows identity for username 'DOMAIN\user' with UPN 'user@domain'. UPN is required when Kerberos
constrained delegation is used. Exception: System.ServiceModel.EndpointNotFoundException: The message could not be dispatched because the service at the endpoint address 'net.pipe://localhost/s4u/022694f3-9fbd-422b-b4b2-312e25dae2a2' is unavailable for the
protocol of the address.    Server stack trace:      at System.ServiceModel.Channels.ConnectionUpgradeHelper.DecodeFramingFault(ClientFramingDecoder decoder, IConnection connection, Uri via, String contentType, TimeoutHelper&
timeoutHelper)     at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.SendPreamble(IConnection connection, ArraySegment`1 preamble, TimeoutHelper& timeoutHelper)     at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.DuplexConnectionPoolHelper.AcceptPooledConnection(IConnection
connection, TimeoutHelper& timeoutHelper)     at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)     at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan
timeout)     at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)     at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan
timeout)     at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)     at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg)     at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)     at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String
upn, Int32 pid)     at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2 contractOperation)     at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity().
a1bef09b-025a-208e-cd5e-4ef6678b6d0d
Any help on how to get this resolved would be greatly appreciated.

Hi GuYuming
I have already read the mentioned blog. Code mentioned there gives me the following output.
I have already verified that the c2WTS service is running and it's dependency 'Cryptographic services' is also running.
Where is the root cause? How can I resolve this?
Output of the code on the mentioned blog:
Testing Service c2WTS
+- Service c2WTS found
+- Service c2WTS is running
+- Path of service: C:\Program Files\Windows Identity Foundation\v3.5\c2wtshost.exe
+- Config File: C:\Program Files\Windows Identity Foundation\v3.5\c2wtshost.exe.config
+- Service Logon: SYSTEM\NT AUTHORITY
----- start of config file ----
<?xml version="1.0"?>
<configuration>
<configSections>
<section name="windowsTokenService" type="Microsoft.IdentityModel.WindowsTokenService.Configuration.WindowsTokenServiceSection, Microsoft.IdentityModel.WindowsTokenService, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
/>
</configSections>
<startup>
<supportedRuntime version="v4.0" />
<supportedRuntime version="v2.0.50727" />
</startup>
<windowsTokenService>

<allowedCallers>
<clear />
<add value="WSS_WPG" />
</allowedCallers>
</windowsTokenService>
</configuration>
----- end of config file ----
Retrieving security groups/users allowed to use the service from config file
+- WSS_WPG
Trying to login .........
Using current Windows Credentials
***** c2WTS could not provide a valid Windows Token. Reason: WTS0003: The caller is not authorized to access the service.
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String upn, Int32 pid)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.<>c__DisplayClass1.<UpnLogon>b__0(IS4UService_dup channel)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2 contractOperation)
at c2WTSTest.Form1.button2_Click(Object sender, EventArgs e)
Now Verifying if user DOMAIN/monish has rights on c2WTS
+- User DOMAIN/monish has no access to the service
*** Analysis Complete ***
Monish Gupta

Could not retrieve the in-memory service URL after starting the in-memory.

A local jvm process is discovered but mission control will not connect.
Both jvm process and mission control are on the same host.
Any suggestion?
Thanks.
This is the mission control help version:
Oracle® JRockit Mission Control 3.1.0 (R27.6.3-40_o, 112101)
I'm running mission control and a jboss web server on jrockit:
$ java -version
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
BEA JRockit(R) (build R27.6.3-40_o-112056-1.6.0_11-20090318-2103-linux-x86_64, compiled mode)
On linux:
$ uname -a
Linux isidore 2.6.27-11-generic #1 SMP Wed Apr 1 20:53:41 UTC 2009 x86_64 GNU/Linux
This is the message that appears in the controlling tty window:
Apr 24, 2009 9:55:43 PM com.jrockit.mc.browser.attach.LocalConnectionDescriptor tryJRCMDStyleStartingOfTheAgent
SEVERE: Could not retrieve the in-memory service URL after starting the in-memory agent!
Apr 24, 2009 9:55:43 PM com.jrockit.mc.browser.attach.LocalConnectionDescriptor tryJRCMDStyleStartingOfTheAgent
Here is the exception in the dialog details:
Could not open Management Console for [1.6] JBoss (5,474).
java.lang.NullPointerException: null
java.lang.NullPointerException
     at com.jrockit.mc.rjmx.ConnectionDescriptorToolkit.getHostName(ConnectionDescriptorToolkit.java:152)
     at com.jrockit.mc.rjmx.internal.RJMXConnection.setupServer(RJMXConnection.java:521)
     at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:144)
     at com.jrockit.mc.rjmx.internal.RJMXConnectorModel.establishConnection(RJMXConnectorModel.java:111)
     at com.jrockit.mc.rjmx.internal.RJMXConnectorModel.connect(RJMXConnectorModel.java:154)
     at com.jrockit.mc.rjmx.ConnectionManager.innerConnect(ConnectionManager.java:95)
     at com.jrockit.mc.rjmx.ConnectionManager.connect(ConnectionManager.java:61)
     at com.jrockit.mc.console.ui.actions.StartConsole$1.preConnect(StartConsole.java:38)
     at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:74)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)

After I posed the above, I saw that the url on the exception is munged.
I didn't stumble over how to manually override that url.
Instead, I added remote jmx capability to the process and added a connector. That is my work around.
Thanks,
John

Could not retrieve the document with the passed obsolete token.

Hi,
Issue is with the specific report not able to execute when the query is cancelled and getting an error when you are cancelling an already executing query.
Receiving an error message during running one of our report in the
following way:
- Run the Webi report
- Select the value for 8 prompts
- Click on cancel
- try to re-run by clicking on re-fresh and receive an error message.
The error message is the following:
"Could not retrieve the document with the passed obsolete token (Error: RWI 00323) (Error: INF)"
Till now we have made the following changes:
This might be caused by a storage token that identifies a document state, which is no longer available in the storage tokens stack.
In the webi.properties file, increased the value of storage tokens stack size.
1. Edit the webi.properties file found in the following location:
u2022 <Installed dir>\program files\businessobjects\BOenterprise115\Web services\en\dsws_webservice_boe\data\asemble\dsewsBobjJava\src\WEB-INF\classes\webi.properties.
2. Add or change the following variables:
u2022 WID_FAILOVER_SIZE (This sets the maximum number of tokens to keep in memory. It is 10 by default.)
u2022 WID_STORAGE_TOKEN_STACK_SIZE (this sets the maximum number of tokens stored on disk. It is 10 by default.)
u2022 Deleted cookies.
u2022 Add the Java Runtime Parameter value from following path:
Start - > Control Panel-> Java -> Java Applet Runtime Settings
Click on View.
Add the Java runtime Parameter value: Xmx200.
It is not a machine specific issue however it is intermittent.
Please advice.
Regards,
Pradnya Kokil

Hi Pradnya,
Following solutions might help you to resolve the issue.
Solution1:
To achieve optimum performance, the developer should limit the number of new windows that can be opened using the OpenDocument function, particularly if using it within the drill function.
If you must open a new window each time, you can increase the number of document instances available on the system by modifying parameters in the webi.properties file:
1. On the Business Objects server, navigate to the following directory:
C:\Program Files\Business Objects\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes
2. Open the webi.properties file using a text editor.
3. Uncomment the FAILOVER_SIZE=10 line by removing the # from the beginning of the line.
4. After FAILOVER_SIZE, add the following:
STORAGE_TOKEN_STACK_SIZE=40
5. Save the file.
6. Restart the application server
Solution2:
Do not use Control Key + N or File New from Browser for invoking new instance of Browser
Avoid opening Infoview by Hyperlinks.
Alternatively, by setting logontoken.enabled property in web.xml for desktop.war, will stop users allowing using old token
Locate web.xml file in desktop.war file deployed on your application server
Locate the following string in web.xml:<param-name>logontoken.enabled</param-name>
Change the <param-value> for logontoken.enabled from true to false (forexample, <param-value>false</param-value>)
Save and close the file
Restart the web application server to apply the changes
Regards,
Sarbhjeet Kaur

HELP! Premiere pro could not retrieve the 'my documents' folder location?!

Hi
I just installed Creative Cloud and downloaded Premiere CS6.
When I start it, I get two dialogue boxes saying the same thing...
"adobe premiere pro could not retrieve the 'my documents' folder location. The application will make use of a temporary folder for this session..."
When I then go to export to Media Encoder, it crashes repeatedly.
I am unable to find the My Documents folder on my system - it's a new system and must have been set up strangely.
Can someone please help here as I am unable to run my video editing business when I can't export files!
Thanks
Geoff

As far as I know "My Documents" is a Windows thing... giving more information when asking a question is a good thing... Information FAQ http://forums.adobe.com/message/4200840
If you are on Windows, search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US for help on creating that folder

Log shipping Could not retrieve backup settings for primary ID

hello,
I implemented log shipping in our server the process of implementation went fine but when I view job history I found
Message
2014-06-11 12:00:01.53   *** Error: Could not retrieve backup settings for primary ID '99817903-626e-4380-bcf1-c09ca6f48b6d'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-06-11 12:00:01.53   *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
2014-06-11 12:00:01.53   *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-06-11 12:00:01.53   *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
2014-06-11 12:00:01.53   *** Error: Could not cleanup history.(Microsoft.SqlServer.Management.LogShipping) ***
2014-06-11 12:00:01.53   *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
2014-06-11 12:00:01.53   ----- END OF TRANSACTION LOG BACKUP   -----
Exit Status: 1 (Error)
also I check for database ID using select * from msdb..log_shipping_primary_databases
your help is appreciated.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog

Thank you all for your contribution.
After testing and debugging I found that when they move their database from one server (server2) to another server (server1) the database still using the old name (server2) which you can findusing this script:
SELECT @@SERVERNAME
so the replication can't retrieve information, unfortunately for me it is difficult to rename the server because it sis development server so they need to make analysis about side effects if we renamed it.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog

Catch: could not retrieve wsdl imports for wsdl

Hello, I am using JDeveloper 11.1.1.17 and am configuring a catch in a BEPL for a web service.
The web service itself works, and the composite that is calling the web service works properly. I am now trying to configure the catch for the web service. I create the catch, and double-click it to get the GUI for the configuration.
I click on the magnifier to open the "Fault Chooser" window. I click on the Partner links, then the service, and then the "Imported WSDL" for the service. This exposes an error message: Exception: could not retrieve wsdl imports for wsdl
Given that the web service calls a service on a remote server (within my organization, however), I tried re-creating the web service call, and the second time specified that it "copythe WSDL and its dependent artifacts into the project" to see if this would allow the catch to "grab" the wsdl.
It does not. The wsdl is listed under the project wsdl files, but each project wsdl file does not show the necessary information.
Does anyone know if I am doing anything incorrect?
Points Vigorously awarded!
Stuart

Hi HDeiby,
We are facing similar issue and trying to resolve the Oracle advices not to Copy the WSDL files locally , and writes a note " Keeping a copy of WSDL may result in synchronization issues " in Jdeveloper when you try to create a reference .
We found out a way to access the Fault by adding PartnerLink to the WSDL ( I know that it is not a best practice to mix interface and implementation ) . This avoids the synchronization issues .
Do you have any other Thoughts .
Cheers,
Lakshmi

Posted documents could not retrieve from Finance system (Travel Management)

Hi Experts,
I could sucessfully post the documents to Finance system using T.code: PRRW and when i click on FI/Co documents tab it is showing error Could not retrieve from Finance (FIN310) system, I have checked the ALE configuration form HR outbound documents are sucess also.
Please advise where i have to check, there is no erros during posting posting was sucess with document numbers also.
Appreciate your help if you could let me know if there is any other reports i have to run for posting.
Thanks
Murali

The problem I faced was related but just slightly different - solution is below. This is really only an issue if your AS Java server is on a different server than your NWDS and a firewall is active.
Error when trying to publish ConverterWeb demo project from local dev machine CE 7.2 Netweaver Developer Studio to server CE 7.2 AS Java was:
Could not retrieve deployment system configuration for CE1. Please check if the system is running.
[ERROR: 7/10/10 10:58 PM /userOut/daView_category (eclipse.UserOutLocation)
Thread[Thread-22,5,main]]
Issue is a firewall problem. Solution is:
1) remove default SAP AS Java from NW Developer Studio (Windows -> Preferences -> SAP AS Java
2) shutdown NWDS
3) open ports 50113 (port for instance 1), 50013 (port for instance 0), 50004 (deploy port) and 5000 (http for NWASJAVA) on the AS Java server.
4) open NWDS
5) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 1, Domain - Default
6) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 0, Domain - Default
7) publish ear.
8) navigate to: http://192.168.1.16:50000/ConverterWeb/
obviously you'll need to replace the internal ip with the ip of your server.
I think this firewall info is somewhere in the docs.
Edited by: adamtarshis on Jul 11, 2010 8:16 AM

Could not retrieve Entreprise global template

I just installed Project 2010 Pro & Server, both seems to be working ok by their own, but when i try to connect Pro to Server I keep getting the message "Could not retrieve Enterprise global template. There seems to be a problem with the database,
please contact your server administrator.", so it just work with no connection. I have tried it with two different PCs (desktop & laptop) and the result is the same.
My config:
Windows Server 2008 R2
SQL Server 2008 R2
SharePoint Server 2010 Enterprise (14.0.4763.1000)
Project Server 2010 (14.0.4763.1000)
Project Professional 2010 (14.0.4760.1000 32-bit)-(Windows 7)
Since the error comes from Project Professional I posted this here, even when it might be cosidered also a Server issue. Anyways, I really need to fix this so any help will be very welcome.
Thanks.

Good news!
Working around with your last question, I logged on to my laptop with two different users, the Administrator and a Portfolio Manager creating their correspondent Project Server accounts, and both worked fine! So I came back to my user and completely deleted
the definition of the Project Server account, created it again from 0 and it worked perfectly.
I had previously the server with the beta version of Project Server 2010, when I installed the final version (different server name) I just changed the URL on my local Project Server account, it seems that it doesn't work like that, either you create a new
account or delete and recreate the current if you want to use the same name, that worked for me.
Thanks for your advice, hopefully this might help someone else.

Could not retrieve deployment system configuration

I use NWDS 7.1 and i want to deploy an external deployable archieve file,when i deploy , i get error says that "Could not retrieve deployment system configuration for ABP"
Before that, i made settings under SAP AS Java by adding new SAP system, giving hostname and instance number . I managed to add new SAP server successfully...
Is there another settings that i forgot..and settings of editon 7.1 is different from 7.0...because in 7.0 it ask me hostname and MESSAGE SERVER PORT..
What can i do ?
Thanks a lot..

The problem I faced was related but just slightly different - solution is below. This is really only an issue if your AS Java server is on a different server than your NWDS and a firewall is active.
Error when trying to publish ConverterWeb demo project from local dev machine CE 7.2 Netweaver Developer Studio to server CE 7.2 AS Java was:
Could not retrieve deployment system configuration for CE1. Please check if the system is running.
[ERROR: 7/10/10 10:58 PM /userOut/daView_category (eclipse.UserOutLocation)
Thread[Thread-22,5,main]]
Issue is a firewall problem. Solution is:
1) remove default SAP AS Java from NW Developer Studio (Windows -> Preferences -> SAP AS Java
2) shutdown NWDS
3) open ports 50113 (port for instance 1), 50013 (port for instance 0), 50004 (deploy port) and 5000 (http for NWASJAVA) on the AS Java server.
4) open NWDS
5) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 1, Domain - Default
6) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 0, Domain - Default
7) publish ear.
8) navigate to: http://192.168.1.16:50000/ConverterWeb/
obviously you'll need to replace the internal ip with the ip of your server.
I think this firewall info is somewhere in the docs.
Edited by: adamtarshis on Jul 11, 2010 8:16 AM

Error: Could not retrieve deployment system configuration

Hi,
when I'm trying to list deployed components in the deployment perspective of my NW Developer Studio (7.2), I get the following error. It seems that the NW server is not reachable, but I had a look at the management console on the server - everything is running.
Exception occurred during the 'List Components' operation.
Cause:Could not retrieve deployment system configuration for CE1. Please check if the system is running.
Exception:
com.sap.ide.eclipse.deployer.api.APIException: Could not retrieve deployment system configuration for CE1. Please check if the system is running.
     at com.sap.ide.eclipse.deployer.DeployerPlugin.getCurrentServerInfo(DeployerPlugin.java:105)
     at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:201)
     at com.sap.ide.eclipse.deployer.ui.UIUtils.getClient(UIUtils.java:212)
     at com.sap.deployment.ui.nodes.SystemNode.fetchData(SystemNode.java:84)
     at com.sap.deployment.ui.nodes.SystemNode.refresh(SystemNode.java:78)
     at com.sap.deployment.ui.view.RepositoryJob.run(RepositoryJob.java:26)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
In addition, I noticed that if I add the NW server in the developer studio (preferences > SAP Java AS), only on server instance is listed (SCS01). Normally (after NW installation), two instances have been listed there.
The error prevents to deploy anything from within the developer studio. Does anyone have a clue about that? Thanks in advance!

The problem I faced was related but just slightly different - solution is below. This is really only an issue if your AS Java server is on a different server than your NWDS and a firewall is active.
Error when trying to publish ConverterWeb demo project from local dev machine CE 7.2 Netweaver Developer Studio to server CE 7.2 AS Java was:
Could not retrieve deployment system configuration for CE1. Please check if the system is running.
[ERROR: 7/10/10 10:58 PM /userOut/daView_category (eclipse.UserOutLocation)
Thread[Thread-22,5,main]]
Issue is a firewall problem. Solution is:
1) remove default SAP AS Java from NW Developer Studio (Windows -> Preferences -> SAP AS Java
2) shutdown NWDS
3) open ports 50113 (port for instance 1), 50013 (port for instance 0), 50004 (deploy port) and 5000 (http for NWASJAVA) on the AS Java server.
4) open NWDS
5) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 1, Domain - Default
6) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 0, Domain - Default
7) publish ear.
8) navigate to: http://192.168.1.16:50000/ConverterWeb/
obviously you'll need to replace the internal ip with the ip of your server.
I think this firewall info is somewhere in the docs.
Edited by: adamtarshis on Jul 11, 2010 8:16 AM

Error could not retrieve the virtual desktop template details

Dear Sir&Madam
I have windows server 2012 R2 DataCenter and I installed Hyper-v , after that i create Template , then I make Preper Shutdown (in C:\windows\System32\SysPrep\SysPrep.exe) Run As Administrator, then choose Generalized , Then Shutdown ,when I make a collection
I got this error (error could not retrieve the virtual desktop template ) please is there any solution for this issue it is very Urgent !!!!!!!!!!!!
Best regards
Rawa Zangana

Hi,
Thank you for posting in Windows Server Forum.
From the error description it suspects that there is some configuration issue. Also agree with Jeremy, please check whether it has 1024 MB of memory. Then suggest you to recheck the steps with below link and then verify the result.
You can run the following command line:
Windows 7: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown
Windows 8: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown /mode:vm
Deploying VDI for RDS 2012 / 2012R2 – Part II – Publishing a Windows 7 Pooled Desktop
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity. No windows identity for domain\user.

Similar Messages

Maybe you are looking for