SPSS on Virtual PC

Hello,
I'm interested in running SPSS (a statistical and data management program) on my Mac using Virtual PC. I'm in need of the PC version becuase I am going to tranfer information among my Mac and the PC's at school. I would be using SPSS version 11.5 and I'm wondering if it can be used with Virtual PC version 7.0-WindowsXP Home edition.
Thank you...

It should work, but it's gonna be god awful slow and virtually unusable if you're going to be running stats on large amounts of data. A guy in our office had mixed results, and abandoned the idea after he saw how long things took.
You'd be better off using the Mac version or getting a cheap PC.

Similar Messages

My Java Virtual Machine cannot be found?

I just installed SPSS (statistics software) for school. I have an error at -36 and my Java Virtual Machine cannot be found. What is the issue, and what are my options?

You may need to download re-install Java. Click Support in the upper right of this page - Downloads - then type the word "Java" in the search field and look to see if there is a recent one for Snow Leopard. For example I located this one which may work for your system:
http://support.apple.com/kb/DL1360

SPSS amos

Hi,
I need help with my macbook pro with Retina display: 2.6GHz Dual-core Intel i5, 8GB 1600MHz DDR3L SDRAM, 128GB PCle-based Flash Storage. Operating system: OS X Mavericks.
I want to install SPSS Amos on my mac (statistic analysis software from IBM).
I used to have SPSS Amos 5.0, which is free and available for download on internet. I looked for it, but from the information I found it looks like an SPSS Amos is not supported by Mac. I was not able to find any version to download.
Do you know how to install and run SPSS Amos on a Macbook?
In alternative, do you know any similar software I may use instead?
I thank you in advance for your help.
Kind regards,
Katia

Since SPSS Amos is only available to run under a Windows configuration, you have two choices. Install Windows as a Virtual Machine with a host program such as Parallels Desktop or use Boot Camp to create a Windows partition on your machine and run it there.
Since you only have 128GB of storage I would probably recommend going with Parallels (that, and it's what I use so I'm more comfortable with it). You would need to purchase Parallels ($80 USD or so?) and whichever copy of Windows you prefer (and SPSS Amos might use a particular flavor of Windows most efficiently so you'll need to Google and ask around).
There were rumors that SPSS Amos was going to be available for OS X a number of years ago, but those rumors never reached fruition. You'll just have to run it under Windows on your Mac.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

SPSS java

I am using SPSS on my macbook, and it says it can't draw the histogram because it can't start java virtual machine. Does anyone know how to sort this out? Thank you

I'm sorry- I've not been on the site before, and I see that this has been discussed at length previously!

What are the supported Macintosh Operating System versions for IBM SPSS Statistics 18,19 and 20? Question I would like to know what are the supported Macintosh Operating system versions for IBM SPSS Statistics versions 18, 19 and 20? Answer Please see

What are the supported Macintosh Operating System versions for IBM SPSS Statistics 18,19 and 20?
Question
I would like to know what are the supported Macintosh Operating system versions for IBM SPSS Statistics versions 18, 19 and 20?
Answer
Please see the list below:
- IBM SPSS Statistics 18 and 19 releases are supported on Apple Macintosh OS 10.5 (Leopard) and 10.6 (Snow Leopard) with Intel processor.
- IBM SPSS Statistics 20 release is supported on Apple Macintosh OS 10.6 (Snow Leopard) and 10.7 (Lion) with Intel processor.
- The IBM SPSS Statistics versions 18 and 19 are not supported on Mac OS 10.7 (Lion).
THIS MEANS THAT TO USE LION ONE FIRST HAS TO UPGRADE TO SPSS STATISTICS 20.

Whilst the 2012-02-15 edition of IBM's matrix does not mention Lion, a few users have noted that:
• 18.0 can be troublesome
• an updated version of 18.x should be better.
Related files
PASWStatistics_1 803_Mac_Patch.dmg and IBM SPSS Statistics 18.0.3.4 Hotfix Mac.zip are no longer available from the spss.com domain, and I could not find them in an IBM domain. If you download from unofficial sources, proceed with caution.
Related pages
In Apple Support Communities:
• will PASW (SPSS) 18 work with LION
• PASW statistics 18 crashes every time
• Java Virtual Machine & SPSS 18 with a question from me.
Elsewhere:
• SPSS on Lion « Decorator Pattern
• SPSS / PASW Mac Patch 18.0.3 and Graphing Fix | The Personal Website of Philip Fizur
• Patching PASW 18 (or SPSS 18) for Mac OS X (Leopard, Snow Leopard, Lion) to version 18.0.3.1
• and other sources, including one domain that I treat as reputable but I'll respectfully not share that link here.
At a glance, you might find that 18.0.3.4 is compatible with Lion.

Problem with DNS and/or Virtual Host (works from inside, not from outside)

I am running several web sites (as virtual hosts) successfully on one Xserve (192.168.200), which are accessible internally and from the Internet (via forwarding port 80 on our firewall).
Now I am trying to add another web site (newmini.domain.com), which however is running on a Mac mini (also on the same subnet as the Xserve) at 192.168.100. What I did is make an additional entry under the Xserve's DNS for the domain (domain.com) (+ Machine..., pointing to 192.168.0.100). (I also made the necessary changes to the Mac mini's httpd and hosts configuration--no problem there).
Now, here's the strange thing: All computers on the subnet, whose DNS points to the Xserve, can see and browse newmini.domain.com fine. No problem. The computers ask the Xserve for the IP of the host in question, the Xserve says, "192.168.100", the request goes to the Mac mini, and it serves the web site as expected.
But this doesn't happen if the request comes from the Internet. Instead of seeing the Mac mini, the client sees the default web site of the Xserve... So it appears that somewhere, the virtual host part of the HTTP request is lost between our firewall and the Xserve.
Any ideas? Thanks.

It's not going to.
You say you've setup port forwarding on the firewall. Port forwarding only cares about the port number (80). It knows nothing about the nature of the request (e.g. the hostname that the web request is for). Therefore all extenal connections on port 80 get sent to the XServe. The newmini doesn't see the traffic at all.
If you only have a single public IP address you can only forward port 80 traffic to a single machine. Your options are to either use a different port number, or configure the XServe to proxy the connection to the mini (so now the traffic goes router -> XServe -> Mini -> XServe -> router), although that might not do what you want since it still places load and dependencies on the XServe.

Report issue on Virtual cube with services

Hi,
I'm following a how-to document to report on a virtual cube using a custom function module and everything seems to be OK except it is dumping at the following line which is included in the How To document "How Tou2026Implement a virtual InfoProvider with Services".
Both <l_s_data> and E_T_DATA are of same data types as discussed in the how-to document.
append <l_s_data> to E_T_DATA
These are the declarations which are same as HowTo document
E_T_DATA TYPE STANDARD TABLE
FIELD-SYMBOLS: <l_s_data> TYPE ANY.
Did any one face this issue. Greatly appreciate any insight into this issue. We are on BW 3.0B.
the dump i'm getting is ...
Data objects in a Unicode program are not convertible.
Error analysis
The statement    "MOVE src TO dst"   requires the operands "dst" and "src" to be comvertible.
Since this statement occurs in a Unicode program, the special convertibility rules for Unicode programs apply.
Thanks,
Hari Immadi
http://immadi.com
SEM BW Analyst

Hi,
In the debugging this is what I found out.. Any further insight?
Virtual cube has only 1 characteristic Z_CRNUM & only 1 keyfigure Z_SR
Report has only Z_CRNUM & Z_SR
<L_S_DATA> has following record & value
component      type     length     contents
K____504     P     9     1.000
S____504     C     18     16EA4D-R
K____504 is the technical name of Z_SR in virtual provider.
S____504 is the technical name of Z_CRNUM in virtual provider.
E_T_DATA (type standard table) has following structure with a total of 5 fields.
S____504    K____504           &KEYEND 1ROWCOUNT   Z_SR
Regards
Hari Immadi
http://immadi.com
SEM BW Analyst

How Create Virtual Directory On Oracle Application Server 10g on RHEL 5

Dear Sir
i have deployed my application on OAS 10g on RHEL 5 ,,now since my application is calling some pro*c programs and then they generate some text based reports on fixed folder named
/treas/temp
now i simply have to open these text based reports on web browser
WEB.SHOW_DOCUMENT('/forms/pcreport/'||v_filename);
but for that i need to create virtual directory name : " /pcreport " without code
kindlly help as its working on my developer suit 10g i created a virtual directory in my application server by making following entry in "orion-web.xml" file
<virtual-directory virtual-path="/pcreport" real-path="/u/treas/temp" />
kindlly help

(My paths shown, yours will be different)
In a text editor :
/u01/app/oracle/product/midtier/Apache/Apache/conf/httpd.conf
Add
Alias /pcreport/ "/u01/app/oracle/product/midtier/forms/pcreport/"
<Directory "/u01/app/oracle/product/midtier/forms/pcreport/">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Create the pcreport directory.
Add a simple test page
vi /u01/app/oracle/product/midtier/forms/pcreport/test.html
<html>
<head>
<title>Simple test page </title>
<style type="text/css">
body {
margin-left: 20%;;
margin-right: 20%;
border: 1px dotted gray;
padding: 10px 10px 10px 10px;
</style>
</head>
<body>
<p>test!</p>
</body>
</html>
Test
http://yourserver.com:7777/pcreport/test.html
Best Regards
mseberg

Is there a way to create a virtual network using C# and the Azure SDK/API?

I don't see a clear way to create an Azure Virtual Network using the SDK.
I have all the methods to create the virtual network configuration, but no way to submit it:
IList<string> VirtualNetworkAddressPrefixes = new List<string>();
IList<string> LocalNetworkAddressPrefixes = new List<string>();
IList<NetworkListResponse.DnsServer> DNSServers = new List<NetworkListResponse.DnsServer>();
IList<NetworkListResponse.Subnet> Subnets = new List<NetworkListResponse.Subnet>();
NetworkListResponse.Gateway Gateway = new NetworkListResponse.Gateway();
IList<NetworkListResponse.LocalNetworkSite> LocalSites = new List<NetworkListResponse.LocalNetworkSite>();
IList<NetworkListResponse.Connection> Connections = new List<NetworkListResponse.Connection>();
VirtualNetworkAddressPrefixes.Add("a.b.c.d/cidr");
DNSServers.Add(new NetworkListResponse.DnsServer() { Name = "TestDNS1", Address = "a.b.c.d" });
Subnets.Add(new NetworkListResponse.Subnet() { Name = "Subnet-1", AddressPrefix = "a.b.c.d/cidr" });
Subnets.Add(new NetworkListResponse.Subnet() { Name = "GatewaySubnet", AddressPrefix = "a.b.c.d/cidr" });
Connections.Add(new NetworkListResponse.Connection() { Type = LocalNetworkConnectionType.IPSecurity });
LocalNetworkAddressPrefixes.Add("a.b.c.d/cidr");
LocalSites.Add(new NetworkListResponse.LocalNetworkSite()
Name = "On-Prem",
Connections = Connections,
VpnGatewayAddress = "a.b.c.d",
AddressSpace = new NetworkListResponse.AddressSpace() { AddressPrefixes = LocalNetworkAddressPrefixes }
Gateway.Sites = LocalSites;
Gateway.Profile = GatewayProfile.ExtraLarge;
NetworkManagementClient netMgmtClient = new NetworkManagementClient(CloudCredentials);
NetworkListResponse netlistresp = GlobalSettings.mainWindow.netMgmtClient.Networks.List();
netlistresp.VirtualNetworkSites
.Add(new NetworkListResponse.VirtualNetworkSite()
Name = "TestVirtualNetwork",
AddressSpace = new NetworkListResponse.AddressSpace() { AddressPrefixes = VirtualNetworkAddressPrefixes },
DnsServers = DNSServers,
Subnets = Subnets,
AffinityGroup = "East US",
Gateway = Gateway,
Label = "LabelValue"
I have also created the entire XML response and sent it to the NetworkManagementClient -> Networks.SetConfiguration() method, but it appears this command expects the virtual network to already be in existence. If anyone could give guidance, it would be
appreciated.

Hi,
As discuss above , we have to create the XML response ,before that first you have to
GetConfiguration() details of existing virtual network.
string.format("@<NetworkConfiguration xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns='http://schemas.microsoft.com/ServiceHosting/2011/07/NetworkConfiguration'>
<VirtualNetworkConfiguration>
<Dns />
<VirtualNetworkSites>
<VirtualNetworkSite name=""{0}"" Location=""{1}"">
<AddressSpace>
<AddressPrefix>10.0.0.0/8</AddressPrefix>
</AddressSpace>
<Subnets>
<Subnet name=""Subnet-2"">
<AddressPrefix>10.0.0.0/11</AddressPrefix>
</Subnet>
</Subnets>
</VirtualNetworkSite>",Networkname,location)+(@"<VirtualNetworkSite name=""demodsf1"" Location=""West Europe"">
<AddressSpace>
<AddressPrefix>10.0.0.0/8</AddressPrefix>
</AddressSpace>
<Subnets>
<Subnet name=""Subnet-1"">
<AddressPrefix>10.0.0.0/11</AddressPrefix>
</Subnet>
</Subnets>
</VirtualNetworkSite> </VirtualNetworkSites>
</VirtualNetworkConfiguration>
</NetworkConfiguration>")
you have to append the node for existing node with new values , i got it its adding new virtual network
Best regards,

How can I cancel the "Recreate All Virtual Dekstops" for a pooled collection in 2012 R2?

I currently have a system single-server installation of VDI, using 2012 R2 Standard as the server, using pooled collections of Windows 8.1. In general, everything works very well, but I've been searching in vain for ONE command. When
I make a change to the master template in Hyper-V, Checkpoint it, then go into the Remote Desktop Services, go the appropriate collection and initiate a "Recreate All Virtual Desktops", how would I cancel that?
It's happened on more than one occasion, where I make a change or an update to the template, and then push out the 25 new Virtual Desktops, and then the client comes back asking for a "little" change....but I'm stuck pushing it out until
all 25 desktops have been recreated. There must be a way to interrupt this process (probably leaving a few VM Desktops in an unstable state...which I don't care too much about as it's a pooled collection), update the template, and push it out again with
the "Recreate All Virtual Desktops". I do have the concurrency set so it recreates 5 at a time, but that noticeably impacts the users, and I don't want to just push out all 25 at a pop and interrupt everyone's work. Any ideas?
J

Hi,
Have you tried Stop-RDVirtualDesktopCollectionJob ? Something like below:
Import-Module RemoteDesktop
Stop-RDVirtualDesktopCollectionJob -CollectionName "PooledCollectionName" -ConnectionBroker "broker.yourdomain.com"
-TP

How to load a virtual tour in Flash Catalyst ?

Hi,
I want to know if is it possible to load on FC 5.5 a Virtual Tour imported in .swf and created from Autopano Tour Pro.
example: http://fraize54th.free.fr/jardinAlex.html
I tried but I don't find any issue possible, if somebody could tell me if I can do this or I I have to give up !
Thanks
Alex

Hi Alex,
I wasn't able to make that SWF load from within an FC project, either. FC does support embedding of SWFs, but there may be some addional logic that sets this SWF up that doesn't function well when called from within another SWF.
This isn't a perfect solution, but you could have an FC button or action open an URL (where your virtual tour swf resided).
Good luck!
Nate

Error While Creating Windows Server 2008 SP2 32-BIT Virtual Machine

I am facing an error while creating a Virtual Machine on the Cloud. The Error is below:
Error (610)
Virtual Machine Manager was unable to find a value for the required Sysprep parameter ProductKey.
Recommended Action
Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again.
My Template does not have the Product Key defined. The OS is Windows Server 2008 SP2 32-BIT. Is defining Product Key absolutely necessary? I have other Templates for other Operating Systems and they are working fine. Only facing problem
with this.
Any help would be appreciated.

In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
The OS profile is required to have a product key. A MAC activation key at the minimum. But the key is required.
If you deploy a VM from a VHD, the same customization assumptions are not at play. Which is why it succeeds. (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
SCVMM has rules. And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

OIM 9.1.0.1 Installation stuck at "Finalizing virtual Product Data Registry

Oracle Database is installed on server and I will be connecting to that one while installing OIM
I installed WebLogic Server 10.3.3 on my machine,started Admin Server
Then I tried to install OIM 9.1.0.1.
But Installation is not getting complete.
Its stuck at this point.
Finalizing Virtual Product Data Registry
This Operation may take a few moments.Please wait.........
and below that there is a progress bar which is showing 100%
One more thing I would like to tell you that When I specify the location of jdk(i.e C:\Oracle\Middleware\jdk160_18), it gave me error
"The Selected JDK Version is not supported by Oracle Identity Manager"
Oracle isentity Manager may not function correctly if you continue installation with this unsupported version of JDK.
Do you want to poceed with this unsupported version.?
So I installed JDK 1.5 on my machine ,gave path of JDK1.5,It also gave the same error
Then tried with JDK 1.6,then SDK EE 1.6......but all gave the same errors.
So I finally I use the one came with WebLogic server i.e C:\Oracle\Middleware\jdk160_18
and on prompting of following error
"The Selected JDK Version is not supported by Oracle Identity Manager"
Oracle isentity Manager may not function correctly if you continue installation with this unsupported version o JDK.
Do you want to poceed with this unsupported version.?
I chosen Yes

What does the setup_weblogic.log says?
-Bikash

Install R12 on a Virtual Machine hosted on Windows Vista

I wanted to install Oracle EBS R12.1.1 on Windows Vista Home Premium 64-bit but used to get .\jre\nt\1.6.0\bin\java error. Hussein Sawwan
helped and said that this is not certified. He adviced me to create a VMWare Server. Following is my experience. I hope it is helpful. Any
suggestions, additions are more than welcome. Thanks to all who helpmed me especially Hussein Sawwan, Helios, Gareth Roberts.
I used to get .\jre\nt\1.6.0\bin\java error after the installation would zoom through 33%. That was because my staging area was not correct. The staging area should be just next to c:\ or whatever be the root directory (or drive). No space or special characters in folder name. My current structure is as follows:
c:\r12stage. Under r12stage I have following folders and subfolders
oraAppDB -- 49 Disks
oraApps -- 11 Disks
oraAS -- 3 Disks (This comes from the Rapid Install Tools)
oraDB -- 5 Disks
startCD -- 1 Disk plus other folders. Just copy startcd from the unzipped download and paste to r12stage area.
I then created a virtual machine using VMWare Server (free download but need to register to get the serial number). Because I installed
vmware server on Vista Home Premium 64 bit Host OS, I have to boot my machine by pressing F8 and then select Disable Digital Signature
Enformcement. Thanks to Gareth Roberts for this tip. Create a vm and install Windows 2003 by selecting the .img file (first cd) by selecting Use ISO image and then path of the windows 2003 cd 1 (zipped file). start the virtual machine, that will install windows 2003 and then ask for location of 2nd cd. On the host machine, where the second win 2003 zip file resides, unzip the second zip file and name the folder as cd2. share this folder to the __vmware_user__ and from the virtual machine, map network drive to \\hostmachinename\cd2. Select this as the location of cd2 and complete the installation. Install MKS Toolkit from http://cygwin.com/ and visual c++ from Microsoft website. for information on this please refer to the following URL. Thanks to Muhammad Habib
http://mhabib.wordpress.com/2007/03/14/installing-oracle-applications-e-bussiness-11i-on-windows-xp/
After installation is done and Windows Update is run, share the r12stage directory on the host machine to the vmuser and launch rapidwiz.cmd from the command prompt and follow the instruction. For internet connection from the VM use Ethernet as NAT.
If the installation errors halfway through, clean up your VM by following instructions in document id 292424.1 in MetaLink. If you dont have access to Metalink then I summarize the steps briefly over here.
Launch the Registry Editor.
Navigate to the HKEY_LOCAL_MACHINE\Software key.
Select the Apache Group subkey and delete it.
Select the Oracle subkey and delete it.
Navigate to the HKEY_LOCAL_MACHINE\System\Current Control Set\Services.
Carefully select and delete each service beginning with Oracle. For example, delete "Oracle Apache Server PROD_<nodename>".
When you are finished, exit the Registry Editor.
Navigate to the Environment Variables editing screen according to your system setup. For example, right-click My Computer and select
Properties. From the Advanced tab, click the Environment Variables button.
Select the following system variables if created during the failed installation, and delete them: DISCO_JRE, DISCO_VBROKER, JSERV,
VBROKER_JAVAVM, VBROKER_TAG, WV_GATEWAY.
Select the Path variable, but do not delete it. Carefully edit it and remove any component with "Oracle" in the name, or that otherwise
references the failed install. For example, delete "E:\11.5.10\test\visora\8.0.6\bin;".
Save and exit System Properties.
Open a command window and navigate to the C:\Program Files\ directory. Delete the Oracle subdirectory.
If your Oracle Inventory directory was not C:\Program Files\Oracle\Inventory and was therefore not deleted in the previous step, locate it
and delete it.
Restart your machine
It is now safe to remove the Oracle filesystem that was partially installed during the failed installation. Go to the base install directory,
or top-level directory under which you installed either the Database Server (DATA, DB) or the Applications Tier Server (APPL, ORA, COMN)
directories, or both. Note that you may choose to rename a directory before you delete it. This allows you to use the same directory name and start a new installation even before you finish the delete filesystem operation. For example, if you placed your filesystem in a "test" directory under
"E:\11.5.10":
C:\> E:
E:\> cd 11.5.10
E:\> rename test oldtest
E:\> del /s /q oldtest
In another window:
C:\> cd <stage install directory>
Q:\> rapidwiz.cmd
After cleaning up if you still get error like RW-50004: Error Code received when running external process. Check log file for
details. Running database Install driver for VIS instance, after 13% complte step 1 of 5 then I suggest that you re-create the machine and follow the above steps again. Including installing win 2003, mks tool kit , vc++, etc. It will be a success.
Starting concurrent manager takes up enormous memory and slows down everything, so if you dont need it then dont ever start it. APPS password is apps and sysadmin user is sysadmin.
Good luck.
Mahesh Acharya

I had Vista 64-bit machine, installed Ubuntu in VMWare. Installed Oracle apps on 32-bit Ubuntu under VMware and was able to access Oracle apps. But, it is very very slow. It hangs sometimes and takes 15-20mins to display Ubuntu screens. Am I missing something here. I have a 4GB RAM and VMWare can not use all the 4GB. It may be using 2GB of 4GB. Am I missing something?

Creation of virtual directory for EPMA during 11.1.2.2 configuration

Hi Experts,
I was trying to install and configure the EPM 11.1.2.2 products on a POC machine with Windows 2008 R2. I was able to install and configure some products and i was facing issue with the EPMA configuration where it struck during "Creation of EPMA virtual Directory". I can see the virtual directory created but not sure why this is not finishing up and just struck at this level, deployment is all fine. Attached the config log for any reference
I have enabled Windows authentication in IIS 7 and disabled Basic authentication
Please let me know if anyone has come across this issue and thanks for your help
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01496] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] IIS version is 7
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01516] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Removing virtual directory: hyperion-bpma-server
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: removeVirtualDir
[2012-11-14T11:33:52.729-08:00] [EPMCFG] [TRACE] [EPMCFG-01508] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Creating virtual directory: hyperion-bpma-server(2:2), configRoot: C:\OracleEPM\Middleware\EPMSystem11R1\products\Foundation\BPMA\AppServer\DimensionServer\WebService
[2012-11-14T11:33:52.729-08:00] [EPMCFG] [TRACE] [EPMCFG-01504] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Creating application pool: DefaultAppPool
[2012-11-14T11:33:52.745-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: createApplicationPool
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] trace: Updating .Net version of application pool...
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] trace: .Net version v2.0 will be used
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: updateApplicationPoolManagedRuntime
[2012-11-14T11:33:58.142-08:00] [EPMCFG] [TRACE] [EPMCFG-01510] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Using default application pool for hyperion-bpma-server
[2012-11-14T11:33:58.142-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: createVirtualDir
[2012-11-14T11:34:00.997-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: installAspDotNet
[2012-11-14T11:34:02.573-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:02.573-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:07.050-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:07.050-08:00] [EPMCFG] [TRACE] [EPMCFG-07380] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.utils.os.windows.IisUtils] Getting IIS7 Default site name
Regards

Why did you modify analytics.ear ?
Should'nt you make changes here : Middleware_Home>\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1
\analyticsRes\WEB_INF\web.xml
Follow this note : OBIEE 11g: How To Access Custom Files Through URL By Creating Virtual Directory In Weblogic Server? [ID 1408240.1]
And you should be able to deploy that virtual directory and access it after authentication.
HTH,
SVS

SPSS on Virtual PC

Similar Messages

Maybe you are looking for