SPUM4 Issues before upgrade to ECC6.0
Hi All,
I am trying to do vocabulary check in SPUM4 before upgrade for ECC6.0. I have 3 Development clients 010,100,110.
My issue is that, I am not sure in which client I should do this vocabulary check. Is it in 000 or individual clients.I got this doubt because , I see the same texts in all the clients.
Can anybody help me in resolving this issue.
Thanks
Chandra,
We did a similar upgrade 2 years ago - 4.7 to ECC 6.0. We had also implemented cash managment on 4.7. The configuration for cash management in 6.0 is the same as in 4.7, so we did not have to make any changes to that. Also, I looked back at our upgrade testing documentation and we did not have any issues related to cash management.
Regards,
Shannon
Similar Messages
-
Dump in spools generated before Upgrading to ECC6
Hello,
After upgrading to ECC6, we note that spools (sp01) generated in the previous version (46c) return the following dump: CONVT_NO_NUMBER ("Unable to interpret" 095 # "as a number").
The dump is produced in the function PREPARE_OTF_FOR_GUI_PREVIEWER.
I would like to add that the printing language is Russian.
Anyone knows if there is any program to run in order to fix these spools or any note to apply in order to solve this issue?
Thanks in advance for your help
Best Regards,
LeoHello
There is no solution for this issue:
"Unfortunately, there is no general solution for correcting the specifiedproblems AFTER the conversion.
To avoid the problems from the very start, execute one or more of the
following steps PRIOR TO the conversion:
o Printing the requests
o Archiving the ABAP lists
o Downloading the ABAP lists
o Converting the requests to PDF with the RSTXPDFT4 report
o Sending the requests by e-mail
According to our developer's feedback about this issue ,it is not
supported that try to convert an old OTF request that was created
before the Unicode conversion.
Best Regards, -
Report writer issue during upgrade to ecc6
Hi all,
On generating report of report writer through GR5G (we are regenerating because we were getting dump for this report after up gradation from 4.6c to ecc6)we found one syntax error. The error is in auto generated program we can see that error but cant fix it as it needs a key and maybe that might not also be the right method to resolve it as auto generated codes should not be touched . So what would I like to ask is how can error come in auto generated program and how do I fix it (error is in data declaration QUOTDATE_MAX(08) TYPE C VALUE '). Here u can see that instead of only is used there is no closing inverted comma.Hi all,
On generating report of report writer through GR5G (we are regenerating because we were getting dump for this report after up gradation from 4.6c to ecc6)we found one syntax error. The error is in auto generated program we can see that error but cant fix it as it needs a key and maybe that might not also be the right method to resolve it as auto generated codes should not be touched . So what would I like to ask is how can error come in auto generated program and how do I fix it (error is in data declaration QUOTDATE_MAX(08) TYPE C VALUE '). Here u can see that instead of only is used there is no closing inverted comma. -
HR - PA upgrade issue (4.6C to ECC6.0)
dear all,
we are currently in the process of upgrade from 4.6C to ECC6.0
and we found this minor issue in the submodule PA:
using tcode pa20/pa30 we can not see any record of IT0000 Actions using 'overview'
but the all the detail actions can be displayed..
the overview (mountain icon) can't show all the records- only happen when we want to overview the infotype IT0000 Actions.
but all the details that we have recorded in IT0000 Actions, can still be displayed (using spectacle icon)
this is only happen in IT0000 Actions
all other infotypes can be overviewed using 'mountain icon' and can be displayed using 'spectacle icon' as normal condition.
anyone ever gone through the same issue?
we have updated patch for SAP HR : SP 32 and EA 7.
the authorization is SAP ALL.
looking forward to hearing from you.
best regards,
dhenny muliawaty (pei pei)Hi Abhishek,
thanks for your reply and your guidance..
we need more information from you..
1. how to back up the table, is it right that we need to contact basis and ask our basis guy to back up the tables?
2. after we do the backup of HR table T512W, before upgrading your HR support package, then we upgrade the support package and after that..
is it right that we need to restore the table? or that the back up is use to do cross check on the content of the T512W after upgrade?
V_512W_B Valuation Bases
V_512W_C Averages
V_512W_D Processing Classes, Cumulations, and Evaluation Classes
V_512W_O Complete View T512W
V_512W_T Wage Type Texts
thanks for informing us that it's a standard practice to backup this table before applying the HR patch to system. how do you know this is a standard practice?
do you know any other additional standard practices for HR in upgrade project from 4.6C to ECC6.0?? do you have the link of this complete information?
thank you for your kind attention and support.
looking forward to hearing from you.
thanks and best regards,
dhenny muliawaty (pei pei) -
Why is Adobe Flash now asking me to quit 'QuicklookUIHelper' during install? I never had this issue before I upgraded to 10.8.5! Is there an alternative to Flash if I want to watch Youtibe or play material that uses Flash? Thanks in advance!
http://hoyois.github.io/safariextensions/clicktoplugin/ and other extensions work if the website has alternatives to the Flash content (much of youtube does) but otherwise, no.
You may need to restart before installing Flash. -
MDMP SPUM4 Vocabulary Assignment, necessary before upgrade?
I have a question about SPUM4 when doing an Combined UC&UPG on a 46c system.
As per the manual you have to run all the scans to complete SPUM4 in Prepare before starting the upgrade.
But do you have to perform the language assignment of the vocabulary list before the upgrade?
Is it possible to do this using SPUMG after the upgrade?
Basically I am being pushed for time and the project team is not ready to do the language assignments during Prepare. So it would be easier for me if I could do the scans and collate all the information required then perform the upgrade. Once the upgrade is complete, then allow the upgrade team to assign the languages post upgrade using the SPUMG transaction.
I am right in thinking that the vocabulary list has to be completely processed before conversion, this is because the words will use the global fallback which may not be right?
Thanks
ChrisI've done the CU&UC the last year, and if i remember ok the SPUM4 is before the upgrade,......and after the upgrade there is the SPUMG,........
You can search more info in other posts of the 2008 year with my problems in CU&UC.
Regards,
Alfredo. -
I want to restore my iPhone to the backup that I did just before upgrading to iOS6. When I try to pull up old backups, I only see one from this morning and an old one from May 2012 when I still had my iPhone 3GS. I have not been using iCloud since it was set up improperly when I first switched to the 4S, the contacts weren't being synced AT ALL. visited the genius bar, they said I need a whole other appointment to visit them and solve that, I haven't had a chance to do that yet. Thus, I am backing up to iTunes.
This morning's sync/backup resulted in me losing most of my contacts, and for the contacts that remain, 99% of the phone numbers are gone. I can recover my calendar entries from this past week, but I don't know how I can recover all of them from my May 2012 backup.
Since I had a backup just last week, I'd like to just go back to it. But how? Or, is there another way to get my contacts restored? And why did they disappear? And what else may be gone that I just don't know about yet?I want to restore my iPhone to the backup that I did just before upgrading to iOS6. When I try to pull up old backups, I only see one from this morning and an old one from May 2012 when I still had my iPhone 3GS. I have not been using iCloud since it was set up improperly when I first switched to the 4S, the contacts weren't being synced AT ALL. visited the genius bar, they said I need a whole other appointment to visit them and solve that, I haven't had a chance to do that yet. Thus, I am backing up to iTunes.
This morning's sync/backup resulted in me losing most of my contacts, and for the contacts that remain, 99% of the phone numbers are gone. I can recover my calendar entries from this past week, but I don't know how I can recover all of them from my May 2012 backup.
Since I had a backup just last week, I'd like to just go back to it. But how? Or, is there another way to get my contacts restored? And why did they disappear? And what else may be gone that I just don't know about yet? -
Forget and reconnect the netwrok doean't solve the problem.
Even Network Reset recommended in others iPad user in the forum can't help as well.
Please advice. Thanks.Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Plug in compatability between BW plugin in R/3 and BI - R/3 upgrade to ECC6
Hello,
we are running SAP NetWeaver BI 7.0 Release 700 Patch 19.
Our underlying R/3 system is still 4.6C with plugin 2004_1_46C ( yes, I know it is time )
We are upgrading R/3 to ECC6 with plug in P701 Patch 3.
Questions:
1.) I would like to know where exactly I can see which ECC6 plugin is copmpatible with our BI Version.
2.) Did anyone who has upgraded to ECC6 experience any particular issues when upgrading the plugin?
3.) Sense check of approach - so far the simplistic idea from a BW perspective is:
New R/3 system has been created and connected to BW :
1.) In BW ACTIVATE SOURCE SYSTEM
2.) In source system connection option : Replicate datasources and activate
3.) Transfer global settings u2013 first simulate then update tables u2013 no rebuild should be necessary
Before the Plugin P 701 in the R/3 ( ECC6 ) system can be upgraded the BW delta queues need to be cleared in the source system ( R/3.)
4.) Clear out V3 queue either via BW as part of the jobplan ( or manually via RSA7 but would mean loss of data )
5.) After run of batch schedule during posting free period check in RSA7 for entries in delta queue - should be empty
now.
6.) Does the clearing of the delta might need to be run twice to clear the queue completely ?????
8.) Deactivate logistics cockpit via SBIW ...LEBW ( is this mandatory ? )
9.) If delta queues are empty and the logistics cockpit is deactivated then upgrade the plug ins in R/3
10.) Then repeat step 1-3 and reactivate the logistics cockpit again
Is this it?
Many thanks for advise on this.
Regards
ChrisACSAP Note : 153967 and
https://service.sap.com/r3-plug-in should give some information on plug in compatibility...
8.) Deactivate logistics cockpit via SBIW ...LEBW ( is this mandatory ? ) - I think you just need to desachedule the collection jobs alone and not deactivate the LO Extractors and activate them once again...
Edited by: Arun Varadarajan on Oct 9, 2009 11:43 PM -
SAP HR- Upgrade to ECC6- Project preperation
Hi Gurus,
Please can you help.
My company already have ecc5, and now want to upgrade to Ecc6. I am soon starting the project preperation.
What issues do I have to look into for this? technical and business minded.
Will the be anything to consider, discuss, change?
I am a junior, and have been giving the oportunity to start on this. I need all the help I can get.
Many ThanksHi
from the business perspective also look into the topic "enhancement packages" (see also the separate community here). Basically you can upgrade to SAP ERP 6.0 + implement enhancements from these packages in one step.
Recommended reading
- service.sap.com/erp-ehp (in particular the functional spaces there)
- Must Know Guide from /erp-ehp
- Master Guide for the highest Enhancement package (at current enhancement package 3) from service.sap.com/erp-inst
For the upgrade to SAP ERP 6.0 refer to the Upgrade (Master and Component) Guides from /erp-inst
regards
Andreas R -
Issue installing/upgrading to ITunes 10.6.1.7
Im having an Issue installing/upgrading to iTunes 10.6.1.7 When upgrading it would not istall and tell me to go to Tools>Download manual. I also had an issue with my IPod touch not showing up in iTuens all of a sudden. So figuring the two problems were related I uninstalled iTunes (cleaned my itues folder in my C drive also) with hopes installing it fresh would work and now when I install 10.6.1.7 I get the following in a pop-up window "The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified. Please run the installer again, or click Finish to exit."
Anyone know what the issue is?Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
How to switch back to old depreciation calc method during upgrade to ECC6.0
Hi Everyone,
We are doing a technical upgrade from 4.6C to ECC 6.0 and we have activated the enterprise extension EA-FIN via SWF5 (switch framework) to use the functionality of accrual engine, closing cockpit etc. However, activating EA-FIN has activated the new depreciation calculation method (Period based depreciation calculation) which, we do not want. We still want to continue using old depreciation method (transaction based depreciation calculation).
So, is there a customization that turns off the new depreciation calculation? Or an OSS note? I read in SDN Wiki and it said, one has to post a customer message (OSS) to SAP and they in turn provide the notes to switch back to old depreciation method and also it is mentioned that these notes are not available in service market place. Is that how it is? Had anyone got into this issue before? Please help me in this regard.
Thanks in advance,
KYou already found your answer on the Wiki:
I read in SDN Wiki and it said, one has to post a customer message (OSS) to SAP and they in turn provide the notes to switch back to old depreciation method and also it is mentioned that these notes are not available in service market place.
What is not clear about that? -
Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query
Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
FROM COSP CLIENT SPECIFIED
WHERE GJAHR IN SELR_GJAHR
AND KSTAR IN SELR_KSTAR
AND LEDNR EQ '00'
AND OBJNR IN SELR_OBJNR
AND PERBL IN SELR_PERBL
AND VERSN IN SELR_VERSN
AND WRTTP IN SELR_WRTTP
AND MANDT IN MANDTTAB
GROUP BY (GROUP_LIST).
LOOP AT I_COSP .
COSP = I_COSP .
PERFORM PCOSP USING I_COSP-_COUNTER.
CLEAR: $RWTAB, COSP .
CLEAR CCR1S .
ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
endselect.
SELECT
into table
for all entries in table
where.
use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
e.g in your case
sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya -
I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.
Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :) -
The RFX before upgrade does not allow me to add items from catalog
hello gurus
I have a problem with the RFX, we did an upgrade to SRM7.0 from SRM5.0.
The RFX that existed before upgrade in the server does not allow me to add new items from catalog.
each RFx I created after the upgrade works fine.
My client needs to work with the RFx still open, add items and make bids.
I have reviewed the upgrade guide and found nothing regarding an update of purchasing documents.
I have
SRM 7.0 SPS03 EHP1
MDM 7.1 SP06
MDM catalog 3.0SP10in SRM 5.0 the system was MDM catalog. Actually, after the upgrade , i have SRM7.01 with MDM catalog.
i donn´t know if it is about version, SP or compatability issue, but i believe the upgrade not affect the purchaser documents.
Those look as locked to modify. on tap Position, the buttom ADD LINE, only i can see Position, not anymore option like MDM catalog, free text.
it is a big problem, because the client has documents opened. i need to resolve this issue. Actually i am working in a sandbox system, but i afraid to have the same problem in PRD system after upgrade.
regards
Maybe you are looking for
-
MacBook Air no longer connecting to monitor via HDMI after recent update.
Hi all, My MacBook air typically has no issues connecting to my external ASUS monitor via Thunderbol-HDMI port. However, after the recent Mavericks OSX update that was pushed a couple days ago, my monitor says that there is no signal. My MacBook air
-
Mail: sent messages not in sent folder
Every time I send an email, especially with attachments, the mail is correctly delivered, but it don't appear in the "Sent" folder. If I send a message via webmail, it is correctly synced with the mail client (it appears in the sent folder on the ser
-
Special GL indicator for asset
HI All i want to create special gl indicator for asset , pl send me the tcode for that. ankita
-
How to view wifi password on osx 10.8.2
how to view wifi password on osx 10.8.2
-
KEPM planning method "customer enhancement"
Dear all, I want to use the planning method "customer enhancement" in transaction KEPM. The planning level has been defined as well as the corresponding planning package. I also activitated the user exit COPA0006 which is behind this enhancement. Whe