SPUMG missing reports

Hi,
I'm trying to made an upgrade & unicode conversion from 4.7E Ext 2 to SAP ERP6 ehp4.
I'm in the SPUMG phase and i check the repport missing and there is 2 report witch is not present in my system:
BEV1\CA_DEL_OBSELETE_BEV1
BEV1\CA_DEL_OBSELETE_BEV3
I have read note 897577 ( this note is not incoporable ) and inside there is only solution for ECC5 and ECC6....
What soulhd i supose to do ?
Regards.

I have run the SPUMG transaction and i have some problem with name tab ( red button in this section )
I have make préparation like discribe in CU&UC guide ( runing the report :RADNTLANG.
But The report finish and there is like information : 62 nametabs for 76 nametabs  succesfully generated.
The report list all the nametab where the generation aborted...i supose that's why i have the RED button in the SPUMG.
What i need to do for solve/generate theses nametabs?
Thx for help.
Edited by: Patrick FABRIES on Mar 12, 2010 2:12 PM

Similar Messages

  • Missing reporting point backflushes...

    Hi,
    Can anybody tell,
    How to carry out the missing reporting point backflushes?
    As i am backflushing the header material but the system give me the error message that ''GR quantity > RP quantities: Temporary reqmts inconsistency possible''
    When i am clicking ''post with correction'', the child materials are not copied to component list.
    Regards,
    Deven

    I think the Plant might not be Activated for "Negative Stocks",
    Activate the Plant and storage location for Negative Stock, it might work
    Get the help of MM consultant, this setting comes in SPRO MM
    Do the trial in sandbox or IDES then try in Production server
    thanks
    K.Prabakaran

  • HID interface misses reports if mouse is connected on the same hub

    Hello all,
    I have designed a usb based oscilloscope for my device (HID Full Speed). It works fine. But when i connect the mouse to the same hub as the device, my device starts missing reports frequently. I have verified it both through my own software and a third party
    software (USBLyzer) which shows that the PC doesn't poll my device every millisecond, which it should. 
    I have searched thouroughly but didn't find anyone facing the same problem. It would be very nice of you if you could help me identify and correct the problem. I have tested it on different PC also
    Thanks
    Regards Waqas Ehsan Butt

    Your hub is probably running out of "juice". If you power the hub via the USB cable connected to your PC then it can draw a maximum of 500 mA which it must distribute between its own electronics, the CRO and the mouse. To solve the problem you must use an
    external power supply for the hub (if it has a suitable socket) or purchase a different hub that comes with its own power pack.

  • Missing reports in Report and Layout manager

    Hi Experts,
    i need to convert with Crystal Converter some PLD Tax reports.
    The problem is that under Tax Reports tree, in report and layout manager, reports of typecode 'RB01' are missing!
    Why are they missing??
    Is there any other way to convert them even if missing?
    i can see them in the tax report form, selecting tax register block and press ok.
    From the print layout designer they are listed.
    Please help.
    Thanks
    Paolo

    Hi Paolo,
    What is your B1 PL? Have you solved your problem? Try to upgrade to the latest PL if you are not in it.
    Thanks,
    Gordon

  • Missing reports in SCCM 2012

    Hi
    I have problem with Reports in SCCM Console, it missing ..
    I have done following;
    I have add myself in permission in the website
    http://SQLSERVERNAME/Reports as roles
    Browser
    ConfigMgr Report Administrators
    ConfigMgr Report Users
    Content Manager
    My Reports
    Publisher
    Report Builder
    I have also add the Role, Reporting Service Point.
    The Reporting Services Configuration Manager is joined to my database ReportServer. The database is native and log-in as Windows Account, my admin account.
    There is more I can checked ?
    -- Sokoban3 --

    Hi
    I have created AD Acount, ReportsUser with Administrative rights and add all permission in http://reportserver/Reports. 
    I got same error, Could
    not retrieve the reporting service name for instance "MSSQLSERVER"
    Maybe is the problem to get contact to SQL Server?
    I don't understand what /ReportServer
    is... ??
    //Sokoban3

  • Mountain Lion Missing Report Safari Bugs Menu Item?

    I recall a Bug reporting menu option in Safari which seems to have disappeared in the latest version in Mountain Lion. Or am I missing it?
    Perhaps the Apple folks think Safari is now perfect. ;-)
    I was trying to view photos of this Hilton
    http://www.hiltongrandvacations.com/Resorts.aspx#details/index&resortId=93&backF unctionality=0
    by clicking the More Photos button, but clicking on Next arrow kept giving an error:
    Could not extract width/height from image: http://multimedia.hiltongrandvacations.com/ws/ResortGallery/dynamicImage.cfm?id= 606&width=880&height=530. Traced measures: width:0px, height: 0px.
    though the site and photos worked fine when I tried it in FireFox, etc. But, I could not find a way to report it to Apple from within SadFarI.
    Is the Report button hidden somewhere in some other menu? Thanks.
    Imran

    Post here:
    http://www.apple.com/feedback/

  • EHS - Near Miss report

    Dear Experts,
    In Incident/Accident log entry we can catagorise the Reportable or Fatal accidents.
    As of now we categorise the Major or Minor accidents based on the reportable and non reportable accidents.
    I.e If we tick the check box as Reportable then it is considered as Major otherwise it is Minor accident.
    Now we want one more category as Near Miss accident.
    How it can be mapped through system. Whether standard SAP provides such reporting or not?
    Thanks in advance
    Regards
    Rane S V

    Hi
    Standard SAP doesn't provide this as available reporting, but it has given enough flexibility to take care of it.
    You can very well configure an additional Incident / Accident log "Entry Type"  as say NMS(near-miss) under "specify incident accident log entry types" in EHS-IHS spro.
    All entries created under the NMS entry type can be fetched under the standard report of "List Incident Accident Log entries" (t-code : EHSK_D_IAL)
    Regards
    Pavan

  • Missing Report Parameter

    Post Author: robarahz
    CA Forum: .NET
    I just upgraded from Visual Studio 2003 to Visual Studio 2008 and am fighting through the issues with Crystal Reports and the Crystal Reports Viewer.
    I am programmatically setting the Report Parameters because I don't want to prompt the user for them. This is the line of code:
          report.SetParameterValue("ReportNickname", "MyReportNickName");
    This was fine in VS 2003, but now the viewer comes back empty except for an error message saying the report parameters are missing.
    Any ideas??
    Thanks for any help.
    -robert

    Post Author: robarahz
    CA Forum: .NET
    SOLVED.
    The problem was the order of operations. Previously, I would set the parameter and THEN set the report data source. This worked in VS 2003, but not in VS 2008 (and probably not VS 2005). So I changed the code to do report.SetDataSource() first, THEN do report.SetParameterValue().
    Hope that helps someone.

  • Hard to believe: missing report on purchase order price variances ...

    dear all-
    Happy New Year to you all and all the best for this new 2008!
    Traditionally the procurement to pay process is an area that really can benefit from automation. However more important than automation (efficiency), tools that support a process have to be effective first! And provide good understanding of business process at hand by providing information on essential key-figures of the process at hand.
    That brings me to the topic of this post: purchase price variance. In my opinion the SAP functionality effectively handles PPV (purchase price variances): variance between purchase price and standard cost (let's call this one PPV1) and the variance between the invoice price and the purchase price (let's call this one PPV2). A good understanding of both PPV1 and PPV2 are useful for potential process improvements ... PPV1 relates more to the efforts of the purchasing deparment and/or determination of pricing in purchase orders while PPV2 brings in the efforts of the vendor.
    Anyways, in order to obtain understanding of the variances mentioned, information is needed. E.g. a purchase price variance report or -analysis. I can't find such a report!
    I did look on various forums and when I find something that relates to a PPV-report or -analysis, people are discussing ways to create an ABAP-report or query ... Much to my surprise: no clear answers. It looks that such a report even does not exist! That's what I find hard to believe!
    Does anyone of you know about a report or analysis-tool on purchase price variances? Or is it really true that such a report is just not there!
    thanks,
    Ben

    Hello Ben,
    i have been checking the whole Forum and also asked around collegues and it seems that it is really still true there is no simple report that is showing PPV details (PO price, Invoice price, Standard price and the quantities and values)
    I think the solution to get such a report is to programm it Starting point would be the line items on PPV account.
    To get such a report with connection between Delivery and Invoice, GR based IV is helpful.
    It is unbelivable that this never has been setup !
    We are currently using FBL3N on the PPV accounts by current monthe with 2 variants subtotalling on matarial and sorting by high value
    Let me know if anybody find a report
    Cheers
    Tim

  • Missing report header on export to pdf

    Hi.
    I have a bqy with 3 reports in it. When I manually export the reports to pdf, it works. But when I run it through the Version 8 portal, one of the reports exports without the header.
    The header does have data fields in it for company and state.
    I have searched online for an answer and even consulted the contractor onsite who is doing the Hyperion 11 Upgrade, but I can't find a solution.
    Any ideas?
    Thanks.
    Barbara

    Thanks.
    My problem was that one report had margins and the other didn't - Plus it turns out a Subreport's margins are ignored by the parent report. I had to create a duplicate report in our scenario.

  • Apple configuration miss reporting number of paid apps available

    AC reports I have 3 codes left to redeem out of 40 and indeed I have three machines needing to load App on.  But when I double click on the 3 remaining I am shown a list of codes and their status.  It shows correctly which  iPads have which code but it claims that the 3 remaining codes have already been redeemed.
    This happened once before with 1 code out of twenty and I simply bought one new code on VPP and it installed.  I now realise this has happened again and I should have pursued this then.  My fear is this is going to be a regular event.
    What to do?

    https://discussions.apple.com/message/23789388#23789388

  • Missing Reports Inbox/Favorites

    First off, I apologize if I've posted this in the wrong forum. Please move it to a more appropriate forum if needed.
    I have a user that for some unknown reason has lost the reports contained in his Inbox and Favorites. Two questions;
    1.) Are reports in an Inbox and/or Favorites just links to reports stored elsewhere in the repository?
    2.) Which table\s might I be able to look in to locate the reports?
    I'm thinking that for some reason they have just been abandoned in the repository and the link to the owner may be corrupt? If anyone has any other suggestions as to what I might be able to try, please feel free to share them.
    BO XI R2 SP2
    Oracle 9i Database
    Deski and Infoview

    Post moved to admin
    1.) Are reports in an Inbox and/or Favorites just links to reports stored elsewhere in the repository?
    yes in CMC they are referred to as user folders and link to the FRS just like public folders
    2.) Which table\s might I be able to look in to locate the reports?
    It sounds like the link (record in the CMS) is gone, but verify in the CMC.
    If it is gone then you would be looking for a report on in the actual FRS and those are not written with the actual file name but more like a random character alias, it may still be there but I don't know how to find it.Maybe others will?
    Regards
    Tim

  • Restoring Missing Reports

    Hello,
    Is there a way to restore the Out-Of-The-Box "standard" reports to System Center 2012 Service Manager (SP1)?  For unexplained reasons our Production environment has all the OOTB reports, but our Dev environment does not. :-(  I've checked,
    SSRS is loaded and correct.  There just are not any reports on the Database.
    So I downloaded all the files from a folder in Production and uploaded them into Dev.  No luck! :-(( They do not show up at all.  I am using my admin account so I doubt it is a rights / roles issue.
    Is there a way to install just the Reports from the CD?  Which brings up the second question...
    Why won't the uploaded folder's reports show up?
    Thank you in advance for your help.  It is probibly something simple, and I am overthinking the problem.
    Ray Watters,
    Chicago, IL

    Hi Ray,
    Go to Administration, Management Packs and filter with "Report Library". You have to see around a dozen of packs. Then visit Data Warehouse, Management Packs and filter the list there to make sure that all packs are successfully deployed. Then go to Data
    Warehouse Jobs to the check status of the same packs there.
    In general, you could export *Report Library packs, remove, and then import them again after MPSyncJob is completed to redeploy the reports. But if you have issues with SSRS it won't help you.
    You can also check the reports in SSPS directly on the web page (http(s)://yourSSRSserverName/Reports).
    Cheers,
    Marat
    Site: www.scutils.com  Twitter:
    LinkedIn:
    Graveyard:

  • Missing report headers when exporting to XLS Data Only

    Hello all,
    I searched for this topic and was unable to find a similar one!
    I have a report that's very long.. (Page Setup:User Defined)
    When I export to Excel Data Only, with option of: Custom: Data is exported according to selected options, the output shows some headers only and skips many.
    I tried going into Design view and putting grids around each feild so that they don't overlap.
    How can I fix this issue?
    Thanks,

    Go to FILE->Export->Report Export Options then select Excel Data Only option from the Format drop down window then press ok.
    Check page headers and footer check box and press ok.
    This should set the options to export report header and footers.
    Hope this helps!
    Achett13

  • Missing report header when exporting to Excel

    When exporting to Excel from an ASP.NET application (Visual Studio 2003), some reports do not include the report header section.  The reports headers are there when exporting to PDF.
    I cannot see any obvious difference between the reports that export the report header and those that do not.  I believe that I have the latest service pack.

    I am using Microsoft Development Environment 2003 Version 7.1.6030.  The About Box only says Crystal Reports for Visual Studio .NET.  It does not show a version number.
    I have not been able to find any information regarding ExportHeaderAndFooter or even ExportHeader.  They do not appear to be options in this version of Crystal.
    I have tried reducing the report header to a simple text object that works OK on another report but it will still not export on this one.  The report footer does export OK though.

Maybe you are looking for