SQ01 changing signal of a quantity field

Hi
I've a query in SQ01 with LIPS table and i need if LIPS-BWART eq '953' , LIPS-LFIMG must be LIPS-LFIMG * (-1) to change signal.
Can somebody help me?
Thanks

Solved....

Similar Messages

Query Alert for a change in value of the Quantity field of the sales order

Hi Experts,
A query alert has been set up to alert the warehouse employee when a new sales order is created by a sales employee. Our client wants the warehouse employee alerted when the sales employee edits the quantity field of an already added sales order.
Kindly assist in designing a query to notify of this change in the Quantity field of the sales order.
David

Try this one:
SELECT T0.DocNum, T0.CardCode, T1.ItemCode, T3.Quantity 'Old Qty', T0.Quantity 'New Qty', MAX(T2.LogInstanc) 'Times Changed'
FROM dbo.ORDR T0
INNER JOIN dbo.RDR1 T1 ON T1.DocEntry = T0.DocEntry
INNER JOIN dbo.ADOC T2 ON T2.DocNum = T0.DocNum AND T2.ObjType = '17'
INNER JOIN dbo.ADO1 T3 ON T3.DocEntry = T2.DocEntry AND T3.ItemCode = T1.ItemCode
WHERE T0.DocStatus = 'O' and T0.DocType = 'I' AND T1.Quantity != T3.Quantity
GROUP BY T0.DocNum, T0.CardCode, T1.ItemCode, T1.Quantity, T3.quantity

Change of the quantity field to 5 decimal places in SAP

Hi Gurus,
The quantity field is appearing with 3 decimal places in BOM, Process Order, etc. Is it possible to make the decimal places to 5.
All the decimal digits from SAP are 3 digits. We have an interface through which the data flows from another legacy system (Fow system) to SAP. And the Fow system setting was 5 digits. The issue is some of the raw material requirement qty was really minor and it might be below the decimal 3 digits.
In that case, when the data flows to SAP from Fow system it will cause the material stage failure. so please help me to investigate how to let the SAP also could have the 5 digits decimal. Thanks.
Regards
Brijesh

Dear ,
Its SAP standard ,to put and use decimal places in BOM qty .You can use upto 3 decimal places in BOM qty.
At SE11 you need to see what measure field is linked to the quantity field.Then goto tranaction CUNI and chage the decimal places of the unit of measure for the qty field unit , it will not allow you more than 3 decimal places in case of BOM qty.
You have following choice :
1. With the access key make changes in the standard program and take help from ABAPer
SAPLCSDI, Table Name-RC29P, Field Name- MENGE.
2) Change the base quantity in BOM header to 1000 aand accordingly change the component quantity.
Hope this is clear
Regards
JH

Restrict the quantity fields from changing in ME54N during PR release

Hi All,
I have created a workflow for purchase requisition release strategy . Apporver's will login into ME54N transcation from the attachment in email and provide Release/Reject on PR . At that when any approver login to ME54N the item detials are in change mode so that user can able change quantity or other fields in the ME54N Transaction . So how to restrict the Approvers for not changing any quantity fields on the PR when it is being released .
Thanks and regards,
Dilip Kumar

Hi-
I do agree with all other comments.
Also discuss with you functional consultant, say if any of the field which determines release strategy is changed by the approver, then end the current workflow instance and start the new workflow instance based on new release strategy (obviously new set of approevrs)
This is possible as SAP will trigger the corresponding event, if any of the field which determines release strategy is changed, (if release stratgey is configured properly).
You need to build the workflow in such a way, that if this event occurs, then end the current workflow instance and start the new workflow instance.
Vinoth

VF02 Quantity field change issue

Hi all,my client want to change the quantity field in VF02 transaction,I tried many ways but none worked.I have got an enhancement point in PAI of the screen,at this enhancement there is a field called 'KOMP-MGAME' have the quantity field value,I changed that value with some other value,but it is not getting reflected there.Can anyone tell me how to solve it?
Thanks in advance.

Thanks Balu for the reply,as siad above my client want to edit Quantity(Value of quantity like want to change quantity 5 to quantity 10) in VF02 which is not available in the standard,but I found an enhancement ,at that point I have got the value of quantity in MGAME,what I want to do is,I want to popup a message with quantity field and the client will enter the quantity after that I will change the quantity(MGAME) in that screen,but it is changing the value of MGAME in that enhancement point but it is not getting reflected in the screen.So how can I change the Quantity now? is there any other field which actually hold the quantity value which appears in the VF02 transaction?
Hope Iam clear with the question.

Quantity Field in PO change

Hi all,
    I have created new purchase order document type 'ZZ' for which i have assigned the field selection "NBF".
    my requirement is in t_code ME22N , the quantity field should be in display for the purchase orders created with this document type (ZZ) only, how to do this? I have tried with the field selection "AKTV", but its effecting all the document types.
regards,
urendra

Hi Prashant & Vishal
   I have tried as u said, but its effecting all the existing PO doc types. I need the quantity field in display mode in PO change for only doc type ZZ, how is it possible?
anyone help me out,
regards,
urendra

Editable ALV- Quantity field value is getting changed while double clicking

Hi all,
I have created Editable ALV grid using Class concepts. Quantity field is editable in dat. but after changing value and if im double clicking on that field, value is getting changed. eg: 45 is changing to .045. How can i resolve this problem.
Could u plz help.

Hi Anu,
One question from my side.
U have displayed the ALV.In that grid u have quantity field.U have changed the value of that field to 45.
When u press enter the value has been changed to .045.Is this u r problem.
U can do onething anu.
Declare one varaible with the local field.
Pass u r quantity field value into that variable.
While displaying thriugh SET_TABLE_FIRST_DISPLAY in your internal table pass this variable.
It will solve u r problem.I think.
Let me if yu have any problem
IF u want u can refer to the program BCALV_EDIT* in se38.
There also u have needful info
Thanks,

Make quantity field of Free goods as non-editable.

Hie!
I have free goods scheme of 9 + 1 .If quantity of main material is 10 then it will split into 9 + 1 where 1 is free of cost.
While making the sales order the free goods quantity field is editable. So the users are able to change the free goods quantity. I want to make this field as non-editable.
Please suggest how to do this.
Thankyou.

Hi Pallavi
If you change the manual qty which is automatically determined by the system then there will be a message thrown by the system
Suppse in your case if 9+1 you change the qty manually to 2 from 1 there is a message V1 no 737 thrown by the system
You need to change the message class thro ABAP development only not possible thro customization
Not only this in delivery also it is possible to change the free qty and this also has to be controlled by the ABAPer only
Regards
Raja

Quantity field in ALV

Hello All,
I am using OO - ALV in which I am displaying a quantity field.This field is an editable field and if user tries to change the value and SAVE , it is taking some wrong values.
Say suppose I am having 1.000 as the initial value and if user changes it to 2.000 and saves it is converted to .002.
I tried with qfieldname , ref_fieldname of fieldcat but of no use. Anything apart from this will be highly appreciated.
Regards,
Dhwani

User might be changing the value to only 2 and you might have declared the fieldcat with 2-3 decimal places. If you enter value with decimals say 2.001 it will take.
Otherwise you need to replace it with char value as Nanda has suggested.
Hope it helps.
Thanks,
Jayant

Quantity field in alv display

Hi all.
we are phasing a problem.
I am using alv to display in output.
I am using a Quantiti field (BDMNG),.
in this field if nodata is there then it is showing 0.000(that is the default value).
I don't want those zeros.I want only space(blank only).
Can any body help me to solve this issue.
Thanks in advance
Eswar.

Hai,
While building field catalog For quantity field Set the NO-ZERO attribute to 'X'.
Or you can change the quantity filed to character in the alv display.
Mark points if helpful.
Regards,
Umasankar

How to make quantity field in puplic templates editable?

Hi SDN,
we are implementing SRM 5.0.
We have a change request to make the quantity field in public templates (or when you chose approved (old) shopping carts for a new order) ready for input.
What I tried so far is to go to the corresponding template, which is
SAPLBBP_PDH_SEARCH 4001 and exchange
`SUBLIST-QUANTITY[n].value`
by
<input type="text" name="SUBLIST-QUANTITY[n]" value="`SUBLIST-QUANTITY[n].value`">
Debugging the corresponding dynpro 4001 of function group BBP_PDH_SEARCH
PAI: MODULE mark_read_from_web.
there:
LOOP AT <sublist> INTO <lfs_sub_wa>.
shows, that the new quantity I might set on the webfrontend does not get transferred to <sublist>-quantity in the dynpro.
Even though in the debugger I manually changed the incoming quantity, it does not show up on the next webscreen with the shopping cart...
any ideas welcome,
regards, matthias

Hi Atul,
the need for the requirement is very obvious, also we had this modification in the old release - and I am merely trying to rebuild it.
But for the business case: Just imagine you have 100 or more articles in a public template and maybe you have to chose new articles from different public templates. Then it is really painful if you have to recheck the shopping cart after you have filled it, just to change the quantities. This modification saves a lot of time and work for the users. Also I am wondering why it is not already standard behaviour.
regards, matthias

Problem with the quantity field in bdc?

Hi,
i have to populate a quantity field in bdc .
for ex 123.00. but the bdc accepting only in the form of 123,00.
How can I do this .
I tried by changing the user profile, but went in vain.
Suggest me how to convert ?
Thanks.

Hi,
Create a variable of TYPE CHAR.Write your quantity field value into this variable and pass this variable to the BDC. This is the way of passing quantity fields to BDC.
DATA: V_AMOUNT(22) TYPE C.
WRITE ITAB-DMBTR INTO V_AMOUNT.
Pass this V_AMOUNT to BDC flow.
Hope this helps.
ashish

Quantity field to be shown on 1ST line only for purchase order items in ALV

Dear All,
I am fetching data from purchase order history table (EKBE) where PO line items contains multiple times. User does not want to view fields that are repeating multiple times in all lines, but in the top line. By sorting the same in ALV , I can do the same with character type fields, but how to do the same with quantity fields. One way out is converting the same into character fields. Is there any other way. Please give me some solution. Also while sorting , the number which gets repeated (i.e Items in PO for different PO's ) does not gets displayed. I want my program to display them.
Thanks,
Debopriyo Mallick

Try this
loop at ist_mseg into wa_mseg.
ON CHANGE OF wa_mseg-con.
    move '111' to wa_mseg-con1.
    modify ist_mseg from wa_mseg.
ENDON.
endloop.
loop at ist_mseg into wa_mseg.
if wa_mseg-con1 ne '111'.
    move 0 to wa_mseg-menge.
    move 0 to wa_mseg-netpr.
endif.
modify ist_mseg from wa_mseg.
endloop.
mseg-con is the concatenation of ebeln and ebelp values.
pk

Purchase Order - Quantity Field printing.

Hi Gurus.
I am printing purchase orders via SAP script.
My users want the quantity field (RM06P-PRMG1) to have a dot(.) not a comma(,)
eg they want to print the number as 200.000 and not 200,000
Is there somewhere, i can switch this without adding an ABAP routine to fix this.
Thanks.
Points will be awarded.

Hi Wandai,
Did you try changing the user settings? Access the menu and go to System -> User profile -> User defaults. Here you can see two options in the Decimal notation tab.
Option 1 is : Comma and
Option 2 is : Period.
Please change and try with each of the above option.
If this doesn't work you need to check the data type you are using for this variable.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

Possible bug? Nested tables and quantity fields in the nested table.

Hey guys,
I have witnessed a weird bug, maybe someone can clarify this for me.
1. Create a nested table. The inner table contains a quantity field of type DZIEME (FROM VBAP-ZIEME).
2. Create your interface and just put this table in the import section. Try to activate. It will work.
3. Create an adobe form for it and a program and execute it. You'll get a short dump saying that VBAP-ZIEME is unknown and that there are errors in the dynamically generated function.
Second test.
1. Create a nested table. The outer table contains a quantity field of type DZIEME (FROM VBAP-ZIEME).
2. Create your interface and just put this table in the import section. Try to activate. It will NOT work.
You have to make the addition of the quantity fields in Currency/Quantity Fields.
From this I see that the checker, doesn't look into nested tables for quantity/currency fields and just activates the interface.
Third test
1. Create a nested table. The inner table contains a quantity field of type DZIEME (FROM VBAP-ZIEME).
2. Create your interface:
2.a. Put this table in the import section.
2.b. Declare the nested Quantity field in the Currency/Quantity Fields section, using the autofiller (the buttons to the right of the field)
2.c Try to activate. It will work.
3. Create an adobe form for it and a program and execute it. You'll get a short dump which for some reason has no info.
From this, I understand that the Currency/Quantity Fields section may not declare the quantity fields, from nested tables, correctly.
What do you guys think? What am I doing wrong?
Thanks,

@Anne Kathrine P...
By nested tables I mean creating table types, in the dictionary (se11) then in the interface>Import section adding a parameter X TYPE B_T.
i.e.
Structure A
Table type of structure A, A_T
Structure B containing a field of table type A
Table type B of structure B, B_T.
The issue can be easily solved for Z tables by changing the component type from quantity to decimal type.

SQ01 changing signal of a quantity field

Similar Messages

Maybe you are looking for