SQ01 header showing double lines

Hi all,
I'm using SQ01 to create a report (in basic list). When I'm adding fields to the list, some fields are creating a second header line. How can I make it so that the header is only 1 line?
Thanks,

Hi,
We can not stretch the header of a SAP Query for more than 256 CHAR.
On the other hand, we can execute the query in background mode to generate a spool. Now open the list of spools, select the one which we are interested and click 'Display in Maximum Width' (Shift+F4). This shows the header in a single row and can be downloaded to an excel sheet.
Hope this helps.
Thanks,
Teja.

Similar Messages

When browsing a new library that I created, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle the image appears. How do I get images to appear in the browser rectangles?

When browsing a new library that I created and exported onto an external hard drive, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle, the image appears, but all the other rectangles remain empty - no image. How do I get images to appear in the browser rectangles? I am viewing this on a second computer (an older intel duo iMac), not the one I created the library on (a MacBook Pro). Both computers have Aperture 3.2.4 installed. When I return the external to the MacBook, all images appear in browser rectangles. What's happening on the iMac?

You may have a problem with the permissions on your external volume. Probably you are not the owner of your library on the second mac.
If you have not already done so, set the "Ignore Ownership on this Volume" flag on your external volume. To do this, select the volume in the Finder and use the Finder command "File > Get Info" (or ⌘I).
In the "Get Info" panel disclose the "Sharing & Permissions" brick, open the padlock, and enable the "Ignore Ownership on this Volume" flag. You will have to authentificate as administrator to do this.
Then run the "Aperture Library First Aid Tools" on this library and repair the permissions. To launch the "First Aid Tools" hold down the ⌥⌘-key combination while you double click your Aperture Library. Select "Repair Permissions" and run the repair; then repeat with "Repair Database". Do this on the omputer where you created the library and where you can see the thumbnails.
Then check, if you now are able to read the library properly on your iMac.
Regards
Léonie

Header mat. in line item showing in zero quantity confirmation...

Header mat. in line item showing in zero quantity confirmation. How to rectified it??

What is the transaction code and where the qty is ZERO
Explain me in detail.
Regards,
Deepak GS

Printing double line in Column label Box/Table Line Type of smartform

Hi,
In MAIN window, in ITEM table, the header box, (where column labels are printed), one double lines r printing!! it looks like (not exactly) instead of single line (________) its printing double lines (======), so, pls. let me know, Wht culd be the reason?
Thank you

Hi,
Check that if you used table borders in attributes of line types.
And also check if you are using sy-unline...
Regards,
Shankar.

How to table double line

In the example, Building tables.vi, the first row and the first column has a double line.
How do I do that on the front panel?
creating the double-line.

Right click on the table and select Visible Items>Row Headers and Visible Items>Column Headers. the data in Row and column headers are not part of the 2D string array that is a table but are available from the properties RowHdrs[] and ColHdrs[] as the example shows.

Double line entry screen

Hi Gurus,
Can any one guide me how can I get double line entry screen in sales order
Thanks in advance
JM

Hi JM
I found that, you have entered the Condition Type EDI2 at Item level, which is wrong.
EDI2 compares the overall item value, that means, Price for each item multipied by number of units.
Suppose, in the order, you have 10 pieces of material M1 (Rs.100/- per piece price). Then the overall item value is 10x100= Rs.1000/-.
EDI2 compares this overall item value. So , you need to enter EDI2 at the Header level of the document. If the difference is more than 1 currecncy unit (in this example, Rs.1/-), then , when you will save the order, system will give the pop up that the document is incomplete.
In the above example, suppose, you enter, EDI2 at Header level as Rs.997/-.
Now, the difference is Rs.1000 - Rs.997 = Rs.3, which is more than the allowed deviation by EDI2 (i.e, maximum Rs.1/- only).
When you will save the order, system will mark this document as incomplete.
EDI2 compares the overall item value and accepts a maximum deviation of 1 currency unit and this is guided by the "formula 8 "assigned to EDI2 in the Pricing Procedure, in the "Alt cal type" field.
So, ensure that, Formula 8 has been assigned to EDI2 in the Pricing procedure.
If you want to enter the Customer expected price for an item, then you have got another condition type EDI1, which you can enter at item level. EDI1 compares each item value and accepts for a maximum deviation of 0.5 currency unit (in our example 5 paise maximum). If the deviation is more than this allowed limit, then system will mark the document (order) as incomplete when you save it.
This is guided by "Formule 9" assigned to EDI1 in the Pricing Procedure.
Hope this will help.
Regards

Contacts and calendar showing double - because of MobileMe?

I got mobile me and the contacts and calendar updated wirelessly as expected, however the last time I plugged in my iPhone to my computer, the iPhone synced with all information (contacts, calendar, itunes, photos, etc.) and now both my contacts and calendars are showing double on my iPhone. Is there a way to fix this?
the calendars show two boxes on my iPhone: "From my Mac" and another "(email)(Mobile Me)". I assume this is why there are duplicates, however I do not know how to delete or get rid of it. I thought Mobile Me would simply update information from the Mac, not add to it.
The contacts have the same two boxes and show all my groups of contacts twice.
Am I not supposed to sync with my mac now that I have mobile me? How do I get rid of these duplicates now?
Thank you,
Kim

For those of us who did use the search function but came up with this useless, unanswered thread, here is the link to the Apple Support page that resolves this issue:
http://support.apple.com/kb/HT3677

My mouse scrolls shows each line moving up instead of moving one line at a time annoying

Since downloading firefox 3.6 when I scroll down a page it shows each line moving up instead of just moving one line up its very annoying

It could be that there is not enough memory in the printer or the print server to hold the entire document while printing. The printer gets Postscript files, which are larger than the original document. Also, if you are doing multiple copies, if you collate the pages, that takes more memory than printing each page multiple times.

Query : In rows, can we split heading in two lines?

Hi Friends !
I know, in columns, we can split the heading in two lines.
In Rows, characteristics " Nomination Header " is there. The output should come like:
Nomination
Header
Awaiting your inputs.
Thanks
Rekha

Hi,
After entering the text <i>Nomination</i> click on enter button and type <i>Header</i> , in the query designer.
With rgds,
Anil Kumar Sharma .P

2 of my personas dissappeared 'My Gallery' since they've rearranged the viewingorder (from highest ranking to creationdate), and 2 of them are showing double. My designer name is 'Nielske' and the personas not showing in my gallery are: "Madonna - Intervi

2 of my personas dissappeared from 'My Gallery' since they've rearranged the viewingorder (from highest ranking to creationdate), and 2 of them are showing double. My designer name is 'Nielske' and the personas not showing in my gallery are: "Madonna - Interview Magazine Collection" and "Madonna - Interview Magazine 4". However they are showing in the complete Persona Database if searched under Madonna (page 5).
== This happened ==
Every time Firefox opened
== the personas in My Gallery (Personas by designer Nielske) got sorted bij date of creation instead of highest ranking

I have the same problem.
Here is the link to my gallery - http://www.getpersonas.com/en-US/gallery/Designer/manishp100
as you will see these two, at least, do not appear - I cant remember if there are more that dont.. im sure there might be -
http://www.getpersonas.com/en-US/persona/245197
http://www.getpersonas.com/en-US/persona/245212

Ipad Video App don´t show 2 lines subtitles

I´m using homesharing to stream the movies i have in my itunes computer. i have many video files in Full HD
The problem only happen in the Ipad Video App, works fine in the Iphone Video App
The problem only happen with video files that have height of 1920x816 (I test with files with resolution 1920x1280, 1920x800, 1920,812, 1920x814, 1920x816, 1918x816, 1920,820, 1792x1080, 1920x1040)
Image from Ipad Video app playing the video with the problem (Only show 1 line of the 2 lines of the subtitle)
Image from Iphone Video App playing the video (Works Fine)
Image from Itunes playing the video (Works Fine)

UPDATE to this CURRENT LOCATION on iPad / iPhone / Find My iPhone issue -
I have a iPad that kept showing my OLD adress in Orlando Fl on BOTH google maps and Apple Maps, even after I moved up north to South Carolina. I tried everything. I then tried my FIND MY iPHONE on my Macbook Pro and same thing. Annoying.
This evening I set up my BACK TO MY MAC so i could acess my Time Capsule from work. After I set it up, and just for grins, i renewed the DHCP Lease while doing this. After the Time Capsule rebooted, my iPad displayed the correct location immediately. My macbook pro was still showing the OLD location in my FIND MY iPHONE. Did a restart and BAM, its all good.
Not sure if it was the renew or restart of the Airport Extreme Time Capsule.
Hope this helps.
Apple Macbook Pro 15" OSX Lion 10.8.2 and iPad iOS 6.1.2

Difference between Journal batch,journal header and journal line

Hi,
Can someone explain what the difference between Journal batch, Journal header and journal line are?
Can we post only one batch at a time?

Hi,
Journal Batch means it contains batch name, description, status, running total debits and credits, and other information.
Journal Headers means it contains batch ID, the journal entry name
and description, and other information about the journal entry.
Journal Lines means it contains journal entry header ID, the line number, the associated code combination ID, and the debits or credits associated with the journal line.
So here is the replationships.
Batch--- 1 to many -- Headers
Headers -- 1 to many -- Lines.
--Basava.S

I format a cell with a double line at the bottom and it appears until I move to another cell and the formatting is lost.

In Numbers, I format a cell with a double line at the bottom and it appears until I clik on another cell and then it disappears.

When you describe the "double" line are you talking about something like this?
If so this is only selecting an edge of a cell. You still have to select:
1) Line style using the menu to the right of the one I have circled (currently "Thin")
2) Line width using the menu to the right of the previous one and, finally,
3) the line color using the menu to the right of the previous one
Even so I have not found a way to copy cell border formatting so I ALWAYS wait until the very end to add border formatting.

10.1.3 JBO - show JSP line # on error, not the java one?

Hi,
Another issue I'm bumping into on the JBO migration to 10.1.3(.1) are OC4J's stack traces for the JSPs are showing the line number of the error from the compiled java class, not the JSP file. Previous version used to do this. How can I get this back?
Example:
Application Error
Return
Error Message: JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[4258 ].
oracle.jbo.RowInconsistentException: JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[4258 ].
     at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelect(OracleSQLBuilderImpl.java:939)
     at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:5591)
     at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:3845)
     at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:4326)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4470)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2996)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2807)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2640)
     at oracle.jbo.html.jsp.datatags.PostChangesTag.doStartTag(PostChangesTag.java:33)
     at _completeInterview__action._jspService(_completeInterview__action.java:252) ... <-- WHERE??

Hi,
Another issue I'm bumping into on the JBO migration to 10.1.3(.1) are OC4J's stack traces for the JSPs are showing the line number of the error from the compiled java class, not the JSP file. Previous version used to do this. How can I get this back?
Example:
Application Error
Return
Error Message: JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[4258 ].
oracle.jbo.RowInconsistentException: JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[4258 ].
     at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelect(OracleSQLBuilderImpl.java:939)
     at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:5591)
     at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:3845)
     at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:4326)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4470)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2996)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2807)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2640)
     at oracle.jbo.html.jsp.datatags.PostChangesTag.doStartTag(PostChangesTag.java:33)
     at _completeInterview__action._jspService(_completeInterview__action.java:252) ... <-- WHERE??

How to use header information in line records while inserting into table?

Hi,
Requirement: Data in flat file needs to be loaded into Oracle Tables.
File has header information (basically file information, some account info) and Line information ( Actual data need to be loaded to oracle tables).
File has position based data, first 2 char for Header is 00 and line is 50
Now, header has some extra info which needs to be loaded along with details lines ( This has to be done using sql loader control file).
What should be the control file logic to capture header information in details lines?
Please suggest.
I am calling this control file from Unix, so I can change the control file definition dynamically by retrieving the first line of the data file and modify the control file before executing the sql loader command. Is there any option to achieve this using SQL LOADER commands?
Thanks,
Venkat.

Pl post details of OS and database versions.
Use the WHEN clause to load header and detail lines into separate tables, then write PL/SQL code to perform needed post-processing.
See the examples in section titled "Distinguishing Different Input Record Formats" here http://docs.oracle.com/cd/E11882_01/server.112/e22490/ldr_control_file.htm
HTH
Srini

SQ01 header showing double lines

Similar Messages

Maybe you are looking for