SQ01/SQVI SAP QUERY for PIR Planned Independent requirement
I wanna make a query to see all the PIR with respect to a plant , material , date etc ..
I tried with table PBIM and PBID , but could not get a success.
Can you tell me the table names to be included to make this query along with the links.
Thanks
Dear,
Even i have created query with three tables, and kept plant as input field from one of the table, but after executing system responding as no data exists. please guide
thanks in advance
kaialsh thakkar
Similar Messages
-
Planned independent requirements for MTO material
how can i maintain PIRs for an item that has strategy 20 (MTO)? when i try to access MD61, sap tells me that i need a requirements type, however strategy 20 doesnt really have these,
Hi Raf,
If you are using planning strategy 20 (MTO) then directly create sales order
If u r use planning strategy 10, 11, 40 (MTS) then you can use create PIR (planned independent requirements)
Regards,
Sankaran -
Planned Independent Requirements Data Conversion
Hi, I am currently trying to figure out what data I need for converting Planned Independent Requirements from Oracle 11i to SAP. Can someone explain to me what equates to a PIR in SAP from Oracle?
Thanks in Advance,
BrianHi YMReddy,
my requirement is that I input PIR for some materials, and want those materials reserved by this PIR, since this PIR are special, can not be used by other requirement.
regards
Gang -
Idoc type and message type for Planned Independent Requirement (PIR)
Hi
Can anyone please give me the information on the idoc type and message type for Planned Independent Requirement(PIR)?
And also the prerequisites to use them.
Regards,
Lohitha
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on May 23, 2011 10:45 AMHi,
You can use IDoc type WMMBID02 with message type WMMBXY.
Also please check test program RLMBXY00 to simulate IDoc WMMBID02.
Regards,
Ferry Lianto -
Creating Planned Independent Requirements for an MRP Area.
Hi All,
I am trying to enter Planned Independent Requirements for an MRP Area, with requirement type VSE and I get the following error;
"Only stock requirements are allowed when planning at MRP area level".
I can enter at the Plant level with no problems.
Any guidance is greatly appreciated.
Kevin.The following is the excerpt from SAP [Help|http://help.sap.com/saphelp_470/helpdata/en/81/470a58ddab11d1b55b0000e82de178/frameset.htm] I think you maintained a planning strategy in the MRP view (for the plant) which doesn't support VSE.
You can delete PIRs from an MRP area by deleting the MRP area number from the Creating Planned Independent Requirements screen and recompiling.
When you define the planning strategies and parameters in the material master, these parameters apply to the whole plant, including all the MRP areas within the plant: You cannot maintain the MRP areas separately.
The integration of the MRP area and the assignment of the MRP area in the sales order is supported only by a user exit in the sales and distribution user exit pool.
Sales orders with MRP areas are created irrespective of the availability check control group in the material master.
Customer order processing of production sales orders with the item category (account assignment Step E Single) is only maintained in the MRP area of the plant.
In Customizing and in the MRP area user exit, make sure that when transferring individual sales orders, only requirements types KE, KEK, KEKS, KET, KELV, KEV, KEVV, VSEF, and VSE are generated.
The following requirements types are valid for the MRP area: KE, KEK, KEKS, KET, KELV, KEV, KEVV, VSEF, and VSE.
You cannot plan with preliminary planning materials in the MRP area.
There is no planning strategy for the material segment of the MRP area.
The planning strategy for the material master segment of the plant is assigned to the material segment of the MRP area.
The consumption mode and the periods of adjustment are derived from the plant in the MRP area of the material master.
Only consumption customer requirements with planned independent requirements are allowed: VSF requirements with KSV and VSFB with KSV. -
Need to find SAP query for corresponding ABAP program.
Hello SAP Experts,
I have an ABAP program "AQDESYSTQV000001ORDERDETAILS==" in ECC 4.7. We had a client copy recently from ECC 4.7 to ECC 6.0. Now in ECC 6.0 I am unable to find this program in SE38.
Can you please tell me how to create this program in ECC 6.0 ? Also, by the name of this program it is clearly seen that this program is automatically created by using SAP query.
I tried to generate the program using SQ01, but system asks me for the SAP query.
Can you please tell me how to find the SAP Query for the corresponding abap program ? Also, the steps as in how to generate the program in ECC 6.0.
Thanks.Hi Danish,
In the program name, the query name is always attached.
For example : The program name is , AQ10SD==========Z10SD_INVPRODL=
Here the query name is Z10SD_INVPRODL and if you go to transaction SQ01 and enter the query name
then you can find the infoset.
And also you can gernate the program with the help of query name.
Please try the same and let me know if any details are required.
Regards,
Darshana -
Planned independent requirements for reservation
Dear all,
can planned independent requirements reserve material? if can, how to reduce?
regards
GangHi YMReddy,
my requirement is that I input PIR for some materials, and want those materials reserved by this PIR, since this PIR are special, can not be used by other requirement.
regards
Gang -
Dear SAP PP
With strategy 10, which settings are required to consume calls for stock transfers with planned independent requirements?
RegardsHi all,
IF other configuration is require ? How to implement this requirement?Also please explain in detail. thanks -
Update for Planned independent requirements MD61
Hello,
I'm doing update for Planned independent requirements, from excel file for plan, than incuding material and quantity per period, using transaction MD61. I have the next inputs:
- Reqmts plan
- Plant
- Version
- Planning horizon
- Planning period
I tried with 2 possible solution, with differents problems:
1. Batch input to MD61: Here I have the problem with go to the next page, for quantity more than the rows displayed in the table control of dynpro in MD61. it does not work with OK_CODE '=P+'and I followed differents advices of other post in SDN but anything worked.
2. Function module: BAPI_REQUIREMENTS_CHANGE and BAPI_REQUIREMENTS_CREATED, I deleted all materials for plan before the update through batch input (this works) then I can use both Function Modules. The problem in this solution is that when I have planning period: 'P' or 'K' the system saves the plan with inconsistences for variant of period or calendar (this information is managed in batch input on MD61)
Thanks for your suggestions,Hi,
Following are the tables
PBIM Independent requirements for material
PBED Independent requirement data
PBHI Independent requirement history
PBIV Independent requirement index
PBIC Independent requirement index for customer req.
Regards,
Vishal -
An SAP Solution for capital planning and Budgeting of Capital Assets?
Is there an SAP Solution for the Planning and Budgeting of Capital Assets?
A solution that provides planning, budgeting, and tracking for capital assets through the entire life cycle of each asset, from the initial request through the final disposal.
The solution needs to be able to run scenarios. A scenario contains equipment that may potentially be purchased. Scenario items are used to help determine cost, capacity, and cash flow feasibility.Hi
What you suggested is the ideal approach...
However, if they say that the budget allocated to capital purposes (70%) applies to both capital projects and expenses and they would like to control it together, but have reports separately, it is not possible with standard SAP...
If they want to have just one IO for both cap and exp, You can suggest them a work around to capture CAPITAL or EXPENSE in a ref field (XREF1 in BSEG) and you can run KOB1 with XREF1 displayed in it....
In standard KOB1, XREF1 is not displayed, you have to use Exit COOMEP01 to include the fields you want... Add XREF1 to the Structure CI_RKPOS and write your code in the include ZXKAEPU01 of EXIT_SAPLKAEP_001
Without an identifier @ the time of booking the transaction in the system (Either by way of IO or a ref field), you wont be able to generate reports later on
Regards
Ajay M -
Sales Orders Assigned to Planned Independent Requirements
Hello everyone
I am trying to write an SQVI query which will show me which sales orders are confirmed against which planned independent requirement; so it will show the same data as MD73.
Is there a table which links the sales order to the PIR?
Thanks
JenDear ,
Find below the table required by you : Go to Se 16
PIR Table : PBIM ,Here you will find Sales Order Filed : KDAUF
Please Check PBED and PBIC which is also useful .
Regards
JH -
Planned Independent Requirements Extractor (t/c MD63)
Hello,
Is there a SAP-delivered extractor for Planned Independent Requirements Extractor (t/c MD63)? This is very "MD04/05 like" but it additionally contains any actual withdrawals.Hi,
1. Go to Transaction code MD79
2. Give the Following details
Plant
Version : The respective PIR version
Requirement date:
3. This will allow you to select all the PIR in the respective plant and as per the selection condition
4.Then hit the execute button
5.You will get a pop up as
EXPORT LIST OBJECT TO XXL
6.And in this by can selec the TABLE
7.Then You get a Popup for Microsoft excel
Now save this sheet ...this will display you the the PIR in the whole plant
This is the only standard report available...for the PIR display..
Kindly let us know if this information was useful and solved your problem..
Reg
Dsk -
Planned Independent Requirements
Can any body tell me what exactly Planned Independent Requirements means and how it differs means from dependent requirements?
Thanks for your time
Thanks Again,Hi,
To produce a finish material, there should be some requirements. The requirements can be in form of forecast or order based. Order based requirements are triggered by sales order or customer requirements. The forecast can be done in any any system for a particular finished product in SAP or non SAP system. After carrying out the forecast, this can be entered into SAP as planned independent requirements. The term PIR is nothing but requirements which are triggered by planning and not by order.
PIR comes into picture when you are using a MTS or related scenario.
Hope this make it clear to you.
Regards
Vineet -
Planned Independent Requirement Not getting displayed in MD04
Hi,
I am assigning material to nwa and doing advance procurement by using procurement type PIR. Reservation is getting created after release of activity but the same is not getting displayed in MD04.
The items of the reservation are getting displayed in MB23.
what could be the reason for this?
Regards,
B P SinghHi,
Planned Independent requirements (PI) are normally configured for consumption by 'Dependent' requirements. Hence the PIR would have been replaced by the reservation from 'dependent' requirement. You can test and verify the same in development system.
Regards
Murali -
ATP against planned independent requirements
I have set up materials that are linked to planning materials using strategy group 63. I have tested setting the planning material consumption to a 2 for forwards/backwards and 3 for forward only. I have set up planned independent requirements by week.
When I book a sales order it gives me a material availability date that is in the week prior to the availability of the material based on planning. For example I have 100 parts available for week 30 which starts on July 21 yet my sales order shows a material availability date of 7/16 and a goods issue date of 7/18. How can I ship the goods if they are not available yet. Any ideas on what could be wrong??
Many thanks for any and all help!!
DebbieHi YMReddy,
my requirement is that I input PIR for some materials, and want those materials reserved by this PIR, since this PIR are special, can not be used by other requirement.
regards
Gang
Maybe you are looking for
-
Pictures DISAPPEARED from pictures folder after installing lightroom to use with creative cloud
so i had lightroom on a trail period that had ended. i had then gone to try out the creative cloud lightroom and it asked me to install. in hindsight i should have just transferred my files to my external hard drive just in case... but i didn't. s
-
Format lost when printing to Generic Text Printer after recent upgrade
We recently upgraded Crystal and now the texty file output from a generic text printer has losst its formatting. The text appears like this: S u m m a r y There si an OD character after each letter. Does anyone know what could be causin
-
Local currencies for company code RCPL cannot be completely determined
Dear all how rectified below error Local currencies for company code RCPL cannot be completely determined
-
How do i activate the micro-SIM
How do i activate the micro-SIM
-
No device My printer (an HP ;-)) is not wireless. It is cabled to my Linux desktop, which serves it on the network for clients via CUPS (port 631). Can you give us a way to connect to it from the TP?