SQ03 - User Groups missing after Upgrade

Hi,
Recently we have upgraded to ECC 6. We have noticed that our SAP Query user groups are missing. We have some reports which we need to access. Any clue?
Thanks in advance
Regards
GB

http://help.sap.com/saphelp_me52/helpdata/EN/47/1e533e5ff4d064e10000000a114084/frameset.htm

Similar Messages

SQ03, user group removed after release upgrade from 4.6C to ECC6

Dear All,
I have a problem about user group - transaction code SQ03.
After the release upgrade from 4.6C to ECC6 the user group, that I created in the old system, are not present in quality and production environment.
In the development environment there is the user group but doesn't contain the queries that I created in the old environment.
How can I solve this issue?
Can I recover all missing queries?
(moreover I can access to the old environment)
Thanks in advance.
Regards

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

User account missing after upgrade to Yosemite?

I have a mid-2010 iMac which up until recently I had two user accounts on for general use and one for music (Garageband, Logic and audio files etc). After upgrading to Yosemite, this separate user has vanished. I'm left with my original admin account, and a guest login. If I search for any of the files using spotlight, they do show up, but if I try to open them I get the message "you do not have permission to open this document". Also I had folders on the desktop of the music account which contained files, these folders show up in a search but are listed as empty? The files themselves are 'blank white sheet' icons as if they have no application.
I would assume this is a lost cause if not for the fact that my hard drive (more than half of which was taken up by the 'music' user) still reads as pretty much full up. So have I wiped all this forever?
Thanks in advance,
Dave

retina MacBookPro mid2012. Clean install of OS X Yosemite 10.10
I'm randomly missing an account at login screen after reboot.
Sometimes I can fix it with booting into my initial account 'Kevin' (userid 501) and then changing to different login 'Christina' (userid 502).
But if I log out from my account, the second account is missing. Same if I do a reboot.. This have me in stitches as I ofcause has the need for privacy from each account.
Both accounts are set up as admins, guest is deactivated.
rMBP 16gb sep2012.
userid 501:
home directory: /Users/Kevin
userid 502:
home directory: /Users/Christina
apart from that... I have loads of problems with Bluetooth, and hand-off only working 1 way (5s with 8.1) where only iOS -> OS X works, not vice-versa.

BB App World Icon Missing After Upgrading to OS 4.0.0.65

Hi,
i'm using blackberry bold 9780.
after upgrading to OS 4.0.0.65 my BB app world was missing. i have tried to reboot and re-install the app world but it doesn't work...
appreciate that someone can resolve this..
Solved!
Go to Solution.

Hi liedia
Welcome to BlackBerry Support Forums
Try this Knowledge Base :
KB29422 BlackBerry App World icon is missing after upgrading to BlackBerry App World 4.0.0.63 to 4.0.0.65
In addition who is your Carrier ? please edit your profile and remove your mobile number .
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Top menu bar is missing after upgrading to yosemite

Top menu bar is missing after upgrading to yosemite

The Library file has been hidden for some time now. So not surprised you are confused upgrading from Snow leopard.
The easiest way to view this folder is to use the Go menu and press the alt key. This exposes the folder in the list.
Hope this helps.
PJRS

Recover users/groups/passwords after an upgrade

I've just upgraded WL 6.1 sp 2 to WL 6.2 sp 4. To upgrade, I uninstalled WL first,
then installed the new version in the same directory (I have copies of all the
old files). I copied fileRealm.properties and SerializeSystemIni.dat files from
the old installation into the new. When I try to start WebLogic, the error I get
is :
"Exception raised:
COM.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad
byte.
at COM.rsa.jsafe.JA_PKCS5Padding.performUnpadding JA_PKCS5Padding.java)
at COM.rsa.jsafe.JG_BlockCipher.decryptFinal(JG_BlockCipher.java)..."
How can I recover my users/groups/passwords from the old installation?

Just as I expected. Before following my instructions, you might need to change your folder options to show hidden files. Now go to:
'''C:/windows.old/Documents and Settings/<username on XP>/Application Data'''
And copy everything inside the '''Mozilla''' folder to
'''C:/Users/<username on Vista>/AppData/Roaming/Mozilla'''
If the '''Mozilla''' folder doesn't exist, create one.
Now, go to '''C:/windows.old/Documents and Settings/<username on XP>/Local Settings/Application Data'''
And copy everything inside the '''Mozilla''' folder into
'''C:/Users/<username on Vista>/AppData/Local/Mozilla'''
Again, if the '''Mozilla''' folder doesn't exist, create one and rename it to '''Mozilla'''.
Hope this helps!
handsomeorlandoman

ABAP Query - Sq03 0 infosets missing post upgrade to ECC 6.0

Hi ,
After upgrading from 4.6C to ECC 6.0 we found that few infosets from SQ03 & also from SQ01 is missing in the upgrade box ECC 6.0.
Can anyone help to troubleshooting it.
Thanks & Regards
Senthil

Hi,
In Upgrade, the some queries may not be generated...
hence you need to regenrate the queries...
Use the FM : RSAQ_GENERATE_PROGRAM
This FM needs input the Query name and the functional area...
The output will be the generated program....
To generate all queries, write a custom report using the above FM..
Reweard if useful
Regards
Shiva

Regular users lost Internet after upgrade

After I installed 2007.05 and inmediately upgraded to 2007.08, I found that regular users were not able to log into the internet. As usual, regular users are members of the wheel, optical, audio and users groups.
What gives?
Thanks in advance.

Lone_Wolf wrote:
bored2k wrote:As usual, regular users are members of the wheel, optical, audio and users groups.
The wheel group is normally used to give users root rights, a regular user should NOT have root rights.
wheel=root rights? Rights like what? I've always added myself to wheel for over a year now and I've never had such rights...

WPA security Types are missing after upgrading to Windows 8.1

After upgrading from Windows 8 Pro 64bit to Windows 8.1 Pro 64bit on my Sony Vaio Duoe 13, I could not find WPA security type while configuring Wireless network manually. (only WPA2 and 802.1X are available).
I have done a lot of troubleshootings like
1-Reinstall Wirless original driver
2-Updating the wireless driver to the latest
3-Uninstall and reinstall windows 8 then upgrading again to windows 8.1
But the same.
Is there any way to add WPA to the security type?

Yes! It works!
To recap : My laptop has an Atheros AR9002WB-1NG adapter, windows 8.1. Even when it had windows 8, it was unable to connect, but unlike now, I didn't look closely enough about the type of network. Originally I thought it was
this problem. But they confirmed that others with windows 8 had no issues with this. Then , when I tried configuring the network manually, I could not find the WPA-enterprise option at all, only the
WPA2-enterprise.
So here I was, and Greg Seth's answer gave me an idea.
In the following instructions, some commands are obvious, so I won't explain unless necessary. So here's what you do :
0) Go to command line, preferably Administrator (not tried without).
1) C:\Windows\System32> cd \Users\<User>\Documents
2) C:\Users\<User>\Documents> netsh
3) netsh> wlan
4) netsh wlan> show profiles
5) delete profile name=<yournetwork>
Enclose the name of network within quotes, this is to ensure that you can cleanly set up the right profile. Don't close the netsh, we'll need it some more. If you do, just reach there the same way as before.
6) Right click the connection icon in lower right corner > open Network and Sharing Center > Set up a new connection or network > Manually connect to a wireless network
7) Try to create a profile, and try to get as many details to correspond with your requirement. The rest we'll edit in command line, so let's make it as easy as possible.
8) Do the same at the next screen. Edit Network settings > change all the parameters that you can, to match the requirement. My university tech support has a detailed document listing the options to choose, usually for windows 7, or even windows 8. get
as many of them as possible.
9) Finish. Move back to your netsh terminal
10) netsh wlan> show profile <profilename>
without quotes this time. This should show your previous attempt at creating a profile in the GUI dialog boxes. In my case, it had WPA2 and AES. It has to become WPA and TKIP. I also set my authMode to userOnly, since I hadn't done it right in the dialog box
before.
11) netsh wlan> set profileparameter
displays a humongous list of parameters with detailed options, just carefully examine the syntax. It's all here.
12) netsh wlan> set profileparameter name=<profilename> authentication=wpa encryption=tkip authMode=userOnly
13) netsh wlan> set profileparameter
Don't exit this yet.
14) Now click the connection icon, and connect to the network. It will ask you the username and password in a different style, that was my clue something was different this time.
15) It should connect. In my case atleast, it did. Verify by browsing.
16) netsh wlan> export profile name=<profile name>
In order that you're not put through this ordeal again, export the profile safely to a file. Again, the profile name in quotes.
17) Wonder why microsoft makes things difficult for us!

Access Sequence JEXC missing after upgrade to EHP7

Dear Experts,
we are facing an error while saving excise invoice through transaction J1IIN in development system after upgrade to EHP 7, Access sequence JEXC missing ( ) Message no. VE306, could you please suggest to find out solution.
Regards,
Amit Anasane

Dear All,
Thanks for helping with your valuable suggestions, finally i got solution of it,
The root cause of this problem was the change in the table T682I by theEHP7 upgrade.The fields KOTABNR has been changed from NUMC(3) to CHAR(3).With NUMC type the wrong statement works anyway.With CHAR type it retrieves no records. thus creating this error message, so it was a pure ABAP programming error. i am closing this discussion once again thanks to all.
Regards,
Amit Anasane

User Management problem after upgrade of SAP DB/Database Studio

Hi,
after upgrading SAP DB to 7.8.02.21 and Database Studio to the same version (this is on Windows 7 64 bit professional) I experience that starting DB Studio as a normal user fails with a message regarding not being able to execute (?) User Management. To start the program I have to run it as administrator. Once I do this it will, afterwards, work fine for a normal user, too, but only for one day (or possibly one logon to Windows 7).
(The error message does not even contain a hint to that solution)
In previous versions it was necessary to run DB Studio once (after installation) as an adminstrator. After that it would work all the same for normal users.
Is there a way to fix this? The desired behaviour being the one from previous versions that after one administrator run it can be started by my normal Windows user? It's, of course, not serious and I do know a workaround, but it's a bit annoying nonetheless.
(And yes, I do know that Windows 7 is not an officially supported platform. I'm just shyly asking).
Best regards,
Thomas

Hi Thomas,
due to the changes in the security concept in Windows 7 it's now required to be admin when you want to start or stop a service or to create 'global objects' like the shared memory files that are used to communicate between DBM-client, server and database kernel.
Since the user management of MaxDB Studio actually is just a small MaxDB instance, the service for this must be running.
To start the service and to create the shared memory the admin privilege is necessary on Windows 7.
What you may do is to flag the dbstudio.exe as "execute as administrator" - that will give you a pop-up warning every time you run the program but it will work.
I assume that is the workaround that you're already using and it's the one I use as well.
AFAIK the colleagues in Berlin are working on a version that doesn't require a MaxDB instance for local user management - that should remove this kind of problem as well.
regards,
Lars

BACK UP DATA MISSING AFTER UPGRADE

Hello again
I am posting again my problem , maybe this time I can get some more help..
I was using an older Itunes and 4.1 os on Iphone. I backed up iphone and restored it (TWICE) to check for data and eveything was there, after upgrading Itunes and OS to 5.0.1 , I tried to restore from the Previous Backup but lots of data was missing (contacts, pix,videos,songs,passwords) . What happened here ?
I found 4 backup folders with dates : 20/jan/2012 (1 folder ) , 23/jan/2012 (2 folders) and 26/jan/2012 (1folder) <---date of upgrade.
(I forgot to mention that when i was upgrading the OS , I wasn't prompted to do anything by Itunes, Itunes upgraded and backed up the phone automatically.)
I looked inside those folders and found out that the folders from 20/jan and 23/jan contain identical info. but the one from 26/jan is different !!!!!
1)does that mean that the original backed up info is still there but not ported over to the new OS ?!!!
2)Is there anything in particular that I should look for in the backup folders ?
3)assuming the original backed up data is still there , how do we make sure it is completely transfered to the new OS ?
Regards

That sounds like a more complicated problem within PC Suite...Maybe you should contact Nokia directly to see if they can come up with a solution for this.
www.europe.nokia.com/contactus
There you´ll find a detailed selection of your country.
Don´t forget to keep us informed on this!
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Spool list recipients of BG Jobs missing after upgrade

Hi all,
After upgrade from 4.7 to ECC 6.0, the Spool list recipients of BG Jobs were deleted/missing from the BG Jobs. Do anyone have any idea on how to resolve this?

Hi Sandeep,
How the settings in SPAD affects the configuration in BG Jobs...I mean that even the configurations are missing from the BG Jobs...

User Exit issue after upgrade from 4.6c to ECC 6.0

Hi Experts,
After upgrade we are facing some issues regarding user exit. In 4.6c we have implemented several user exit to do customization in several module like SD,FI and HR. But after upgrade it has been identified that SAP has already provided this functionality in ECC 6.0. Now our problem is when this transactions are called or executed control is going to both custom and standard code. Which took long time to execute and causing performance issue.
Is there any ways to identify which are the functionality SAP has provided in ECC 6.0 so that we can delete our custom user exits.

Hi
List all the user exits which you have modified and check in OSS notes you will get the OSS note with all the details what functionality has been changed. Based on this you can delete or retain the user exits which ever you want.
Regards,
JB

Original user profile destroyed after upgrade to version 3.6.13

After upgrade to 3.6.13 en-US from ?? (maybe ?3.4.???, but I do not remember well; I really did not expect problems) all the history and bookmarks were lost.
I searched for them in Profiles directory, but there was only a new profile with "new template" data.
I installed the new version like an "admin" user (to have it available for all users "for sure").
The installation seemed to detect previous version of Firefox as it detected its istallation directory (and it had not offered the possibility to change the installation directory) and it detected that many extensions are do not have compatible versions.
Before the installation I had beed experiencing crashes when running Firefox like me (user "marek"; power-user) before. It was possible to workaround it by running Firefox as "admin" user (ugly and unsafe, I know) which I was doing for more than a year. Firefox worked than quite good, it installed its updates, etc.
Of course, I checked the admin user profile, it was overwritten by a "new" one.
Moreover, I had been cleaning the Temporary Internet Files and History of IE (IE7; done from IE); but I did not expect it could be related.

It looks like you have the latest version of Firefox. <br />
Maybe that message referring to Plugins? <br />
You do have at least 3 Plugins that are old, Java is very old.
See this page for more information. <br />
http://www.mozilla.com/en-US/plugincheck/

SQ03 - User Groups missing after Upgrade

Similar Messages

Maybe you are looking for