SQC to open output file

I want to know which sqc is included to open output file for a sqr ?

Hi,
the name of the file you are opening with OPEN like:
open $filename as #j for-writing record=80:fixed
and $filename has the path-information prefixed, you are there.
So $filename would be "<whereever_the_setup_sends-me/my_file.out>"
There you go.
Cheers
Peter

Similar Messages

I had 3 versions of FF and had to redo the HD and now no version will install says "Can't open output file" i have winddows 7 64 bit 8 GB memory and 1T HD but i have it on my other desktop and laptop with less memory and HD space and works fine

I had 3 versions of FF and had to redo the HD and now no version will install says "Can't open output file" i have winddows 7 64 bit 8 GB memory and 1T HD but i have it on my other desktop and laptop with less memory and HD space and works fine laptop has windows 7 64 bit and other desktop hook to my 32" tv has win 7 32-bit i lso did clean removal of all versions of FF and did new DLs with screen shots of it DLing, complete of DL and after i got the error again.

i am posting this as a reply due to it would not allow me to attach screen shots except for this way

"Extraction Failed: Cannot Open Output File" error message when installing new drivers

Hello, I'm trying to install new drivers for my HP Photosmart C4385 Printer. I downloaded the full feature drivers for Windows XP 32-bit, and when I start to install (extract), I get the error message:
Extraction Failed
Cannot Open Output File
And the process closes. It happens at about 85% extraction every time.
Any idea why? I called HP but since it is out of warranty they wanted money, which I think as absolutely ridiculous - won't even give me basic support?? Poor, poor customer service.
This question was solved.
View Solution.

Hi,
If you haven't still got the Full Feature software installer, download it from the link below and save it to your Desktop. If you already have it, place it on your Desktop.
ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
Make sure the Printer is disconnected from your PC.
Download and install 7-ZIP. Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ). Connect the printer to your PC when the software asks.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got an error message, Cannot Open Output File. Can you please help me?

I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got the error message, Cannot Open Output File.

The file could be downloaded incorrectly. Could you redownload it again from [http://getfirefox.com http://getfirefox.com]?

Can not open output file on installtion

On installing Firefox, it comes up with a dialogue box saying can not open output file. Therefore, I cannot complete the porcess of installation

Hello alstoner,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Firefox setup 9.0.1 exe won't extract (cannot open output file)

I downloaded firefox 9.0.1 and it won't extract and install on a win7 computer. It says cannot open output file. I had previous versions of firefox for 10 years. I tried disabling AV and firewall also. Please help. Nate

Thank you! My solution was slightly different, but in the end, seeing what was going on in the Help menu in the browser did the trick. Turned out I had been stuck for who knows how long "downloading" a version 3! Also had a toolbar to disable but not the Ask.

I downloaded 4.0 but it won't install. It keeps saying Extraction Failed Can not open output file. HELP!

Download of the new 4.0 won't install. It keeps saying Extraction Failed Can not open output file.

Oh? That's "reset youtr laptop"?
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

HP DESKJET INK ADVANT K209a-z, extraction fialed : error message "0 cannot open output file"

D/Sir,
I have extracted hp deskjet int advant k209a-z driver using 7zip.
I was getting the error "Extraction Failed: Cannot Open Output File".
On extract with 7-zip, I get the message:
0 can not open output file "<folders>/Autorun.inf"
I am on business laptop with Windows XP but tried with Admininstrator login as well.
Please help me. How to extract it sucessfully?

That type of error message may be indicative of a bad file. Did you download it on the web? If so, try again, but do not use a download manager or program to do it, those can occasionally cause problems with compressed files.
It could be possible, also, that some sort of security program on your laptop is blocking the extraction process. If that is the case you should be able to find some error in the Windows event viewer through the control panel.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

When I try to download firefox I get this error "cannot open output file". I had firefox once but uninstalled it now I cant' reinstall. Why?

I had firefox but uninstalled it because of problems with add on Recipefox. Now when I try to reinstall it I get and error message "cannot open output file". I really liked firefox, How do I get it back?

When you click the download link on [http://getfirefox.com GetFirefox.com], you should be asked if you wish to Run or Save the file. If the described situation happens when trying to Run the download, try instead to Save it and put the file on your Desktop or a similar place where you are certain that you can find it again.
When the download is complete, try double-clicking the downloaded file in the normal Windows Explorer (browse your way to the file from My Computer). This should start the installation.
If you notice in the Explorer window that the file seems to be lacking the Firefox orange/blue icon, rightclick the file and select Properties. The picture should look somewhat like the attached picture (except that mine's in danish, but that is irrelevant) if saved correctly - if it does NOT look like this, please describe the contents or attach a screenshot of the box. Especially what it says under "File type" - it should be "Program"; if it's not, we'll have to look into what the problem could be here.
Slightly off-topic, your Internet Explorer seems to be quite a bit out of date (IE 6, where current version is IE 8), so I would strongly recommend that you try to run Windows Update to get your system updated. If this is a company system (like a Terminal Server thin client machine), this may not be possible, and your system administrator will most likely have to help you.

Tried to install Firefox but an error message "Extraction failed - cannot open output file" always pops up, without a reason. Why's this happening?

Tried to install Firefox but an error message "Extraction failed - cannot open output file" always pops up, without a reason. Why's this happening?

Try to disable your anti-virus software temporarily to see if that makes it work.
You may need to delete the temp folder (%TEMP%) to remove the old files.

I can't install Firefox. Get a message saying "can not open output file" Firefox version 3.6.6

Firefox stopped working after updating. I uninstalled it and downloaded latest version 3.6.6. Before that 3.6.3.
When I try to install, I get a message "Extraction Failed.. Can not open output file" . I trie d former versions, all with the same result. I've already ran several antivirus and anti-malware, spyware.. etc.
Everything else works fine, except for Firefox...
== This happened ==
Every time Firefox opened
== after update ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.86 Safari/533.4

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
If you keep having problems then disable your security software (anti-virus) during the download and installation of Firefox.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.

When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.
== This happened ==
Every time Firefox opened
== I tried to download firefox. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS-RTC LM 8)

When you click the download link on [http://getfirefox.com GetFirefox.com], you should be asked if you wish to Run or Save the file. If the described situation happens when trying to Run the download, try instead to Save it and put the file on your Desktop or a similar place where you are certain that you can find it again.
When the download is complete, try double-clicking the downloaded file in the normal Windows Explorer (browse your way to the file from My Computer). This should start the installation.
If you notice in the Explorer window that the file seems to be lacking the Firefox orange/blue icon, rightclick the file and select Properties. The picture should look somewhat like the attached picture (except that mine's in danish, but that is irrelevant) if saved correctly - if it does NOT look like this, please describe the contents or attach a screenshot of the box. Especially what it says under "File type" - it should be "Program"; if it's not, we'll have to look into what the problem could be here.
Slightly off-topic, your Internet Explorer seems to be quite a bit out of date (IE 6, where current version is IE 8), so I would strongly recommend that you try to run Windows Update to get your system updated. If this is a company system (like a Terminal Server thin client machine), this may not be possible, and your system administrator will most likely have to help you.

Error message when publishing and problems opening output file

I have 5 projects linked together. When I publish one, I get a message that the files listed below are linked to the open project, and one or more of these projects may require exporting. I have tried to open these files and choose File | Export | Project to | but the options in the list (Flash 8 and Flash CS3) are both grayed out--on every one of these files. I'm publishing to Flash 9.
I didn't think much about this message until a few reviewers said they can't open the project, or when they do, they don't see my playbar on the skin.
One more thing--when an IT person was trying to help one reviewer open the output file, the IT person said "Oh, there's a problem with the code in line 25." I guess that's the html code? I'm not a programmer, but I can look at html code. What should I be seeing there in line 25?
Is their problem opening the output file(s) related to my message about possibly needing to export files? Why might they be having problems getting the output file to open?
Thanks for any insights you can provide!
SAM

Hi Sam
It depends on a number of things. Are you certain you uploaded all the files involved? If not, there will be problems.
The message about the linked files is quite simply advising you that you have links from that particular movie that will expect to find the files being linked to.
If a person isn't seeing playback controls and you have included them, it's likely you haven't provided the correct link for them to open and play the file. Typically you provide a link to the HTML page Captivate creates. As long as all the output files are in the same place on the server, you should be good to go.
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Trying to update - extraction failed; cannot open output file

firefox working fine; tried to update; lost FF, now receiving this error message.

Hi,
If you haven't still got the Full Feature software installer, download it from the link below and save it to your Desktop. If you already have it, place it on your Desktop.
ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
Make sure the Printer is disconnected from your PC.
Download and install 7-ZIP. Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ). Connect the printer to your PC when the software asks.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Export problems - Error compiling movie - Unable to Create or Open output file

I've got a weird one here. I cannot export projects to my main render Raid-0 harddrive, but I can to any other drive.
This is not unique to Premiere. It's happening to me in AE and Cinema 4D, so I'm sure it's not an Adobe problem. But I'm posting it here in hopes that someone could help me figure this out. I've never run into this before.
I recently was forced to reformat my harddrive and reinstalled everything due to a harddrive failure. Reinstall of Windows 7 Ultimate and every other software went as expected.
My drives look like:
B: 2TB drive
C: 2TB drive has opperating system and CS5
R: is a 3-disk (3TB ea) Raid-0 (my main render drive)
S: 15TB NAS
T: 15TB NAS
I can render from C4D/AE and export from PP to ANY drive other than my R:\. When rendering to R:\ I always get a message like this (this happens to be from Premiere/AME):
I ensured my file permissions on R:\ were set to "yo, let anyone on this computer do whatever the heck he wants; got it, Winny?" but that didn't do it.
Any other suggestions?
I'm able to work, but can't render to the right drive. I can render to another drive and copy the rendered file over through Windows, no prob. Just rendering/exporting ain't working on any program.

I think I have identified my problem here. I will post the info for anyone else stumbling here in the future.
I belive it was my Raid box (Rosevwill RSV-S4-X) and/or controller card that was acting stupid. Not sure exactly what was going on. I could read/write from/to it all day long, but something about it didn't like things rendering to it. I would still like to know what the heck it's problem is since I will just migrate this box/controller back into our company "system." The laste bloke's computer this was on didn't seem to mind it at all. Computer picky? Don't know. It even worked on mine before the reformat and reinstall of Win7.
I installed a Sans Digital box and my computer just loved it and accepted it right into the family. Whew!
Not a solution, but if you have a Rosewill box and/or card, that's the first place I'd look if you're having a problem.
I mean, with a splash page like this, it's amazing it even worked AT ALL! Ya should'a seen the "interface" (notice the quotes).

SQC to open output file

Similar Messages

Maybe you are looking for