SQl 2008 R2 Failover Cluster does not failover after fresh install

I have installed a two node SQL Server 2008 R2 cluster. I used a Named Instance and the SQL Server and SQL Server Agent cluster resources are online on node 1. When I want to move the SQL Server group to node 2, the SQL Server resource fails to start (error
1205 and 1069).
I see in the application log that it is starting up database 'master'. After that I see: Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup etc...
It runs fine on node 1, so what goes wrong?

Hello,
Please verify DTC is configured correctly.
http://msdn.microsoft.com/en-us/library/dd897479(BTS.10).aspx
Please see the following resources also:
http://technet.microsoft.com/en-us/library/cc773525(WS.10).aspx
http://technet.microsoft.com/en-us/library/cc756225(WS.10).aspx
http://technet.microsoft.com/en-us/library/cc773447(WS.10).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

[SOLVED] Microphone does not work after fresh install

Hello all,
I just installed arch a week or so ago, everything is great except from
the fact that my microphone does not seem to work (at least with
skype)..
This is the output of amixer:
[jorge@flamingo ~]$ amixer
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 57 [89%] [-5.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',1
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 183 [72%] [-14.40dB]
Front Right: Playback 183 [72%] [-14.40dB]
Simple mixer control 'Mic Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Mic In'
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Playback Source',0
Capabilities: enum
Items: 'Digital Playback' 'ADAT' 'Analog Mux 1' 'Analog Mux 2' 'Analog Mux 3'
Item0: 'Digital Playback'
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 3
Mono: Playback 0 [0%] [-18.00dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [on]
Front Right: Capture 14 [100%] [21.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [off]
Front Right: Capture 14 [100%] [21.00dB] [off]
Simple mixer control 'Capture',2
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [off]
Front Right: Capture 14 [100%] [21.00dB] [off]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 115 [96%] [27.50dB]
Front Right: Capture 115 [96%] [27.50dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Input Source',2
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Mux',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 4 [100%] [40.00dB]
Front Right: Capture 4 [100%] [40.00dB]
Simple mixer control 'Mux',1
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 4 [100%] [40.00dB]
Front Right: Capture 4 [100%] [40.00dB]
Simple mixer control 'Mux',2
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 4 [100%] [40.00dB]
Front Right: Capture 4 [100%] [40.00dB]
[jorge@flamingo ~]$
The capture section seems to be ok.. However when I am using skype,
the people I call only hear a noise and nothing else. I confirmed that with
skype call testing service..
Moreover, the levels of the mixer are ok and nothing is muted.
Finally, the mic itself works fine, I dual boot with XP and I didn't have
any problems with skype there..
Please let me know what other information you need..
Many thanks in advance.
Last edited by geo909 (2011-02-23 01:23:28)

alterecco wrote:
If you are using alsa, then remember to go into alsamixer and turn up your microphone volumes and set a device as the capture device.
Basically, go to the capture pane (F4), navigate to the capture device you want to use, and press Space to toggle it on.
First of all, I'm so sorry for the late reply.. I didn't have access to a pc for a long time.
And actually your suggestion did the job! I don't believe it was something that simple,
I spent hours googling around and trying all sorts of stuff..
Thanks a lot!!!

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Cluster does not work after a while

Hi :
          I have 2 clustered EJB server, the IP address is 192.168.0.226 and
          192.168.0.227.
          A servlet server is calling these two EJB servers with
          t3://192.168.0.226,192.168.0.227:7001
          All three machine use weblogic 5.1 sp9, Win2K Advanced Server.
          If I restart weblogic service, then the cluster works fine. but after while
          the cluster does not work, all the client request goto only one machine, in
          most case it's 227.
          It has no use even if I restart the service in the losted server. I have to
          restart all the server.
          The weblogic.log in the losted server is like this :
          Thu Apr 26 00:04:16 GMT 2001:<I> <RJVM> Signaling
          peer -6817319611378695685S192.168.0.204:[7001,7001,7002,7002,7001,-1] gone:
          weblogic.rjvm.PeerGoneException:
          - with nested exception:
          [java.io.EOFException]
          Thu Apr 26 00:04:47 GMT 2001:<I> <RJVM> Signaling
          peer -2123734719233546013S192.168.0.227:[7001,7001,7002,7002,7001,-1] gone:
          weblogic.rjvm.PeerGoneException:
          - with nested exception:
          [java.io.EOFException]
          Thu Apr 26 00:14:16 GMT 2001:<E> <ConMan> Attempt to sendMsg using a closed
          connection
          Thu Apr 26 00:14:16 GMT 2001:<E> <RJVM> Exception on send :
          weblogic.rmi.ConnectException: Attempt to sendMsg using a closed connection
          Please help me
          thanks
          andrew


Are you running with any proxy? Is the servlet server also the static httpd
          server?
          What type of network equipment are you using? If its high-end (Cisco) make sure
          all ports are set to 100/Full.
          Also, try setting the SendDelay slightly higher (ie. 25, 30, 35). Experiment
          with different values.
          weblogic.cluster.multicastSendDelay=25
          andrew wrote:
          > Mike, thanks for reply
          > The 192.168.0.204 is the servlet server.
          > I changed the NICs to use 100Mbps/Full duplex. it looks better: the error
          > msg is less than before, the it still happened.
          > Any suggestion?
          > thanks
          > andrew
          >
          > "Mike Kincer" <[email protected]> wrote in message
          > news:[email protected]...
          > > Which box is 192.168.0.204 ??
          > > It is communicating via multicast, which I would say is suspect.
          > > Otherwise, I'd say you have some network issues.
          > > Make sure all switch ports and all NICS are NOT set to "auto" config.
          > Select
          > > 100Mbps/Full duplex on all ports.
          > >
          > > andrew wrote:
          > >
          > > > Hi :
          > > > I have 2 clustered EJB server, the IP address is 192.168.0.226 and
          > > > 192.168.0.227.
          > > > A servlet server is calling these two EJB servers with
          > > > t3://192.168.0.226,192.168.0.227:7001
          > > >
          > > > All three machine use weblogic 5.1 sp9, Win2K Advanced Server.
          > > >
          > > > If I restart weblogic service, then the cluster works fine. but after
          > while
          > > > the cluster does not work, all the client request goto only one machine,
          > in
          > > > most case it's 227.
          > > >
          > > > It has no use even if I restart the service in the losted server. I have
          > to
          > > > restart all the server.
          > > >
          > > > The weblogic.log in the losted server is like this :
          > > >
          > > > Thu Apr 26 00:04:16 GMT 2001:<I> <RJVM> Signaling
          > > > peer -6817319611378695685S192.168.0.204:[7001,7001,7002,7002,7001,-1]
          > gone:
          > > > weblogic.rjvm.PeerGoneException:
          > > > - with nested exception:
          > > > [java.io.EOFException]
          > > > Thu Apr 26 00:04:47 GMT 2001:<I> <RJVM> Signaling
          > > > peer -2123734719233546013S192.168.0.227:[7001,7001,7002,7002,7001,-1]
          > gone:
          > > > weblogic.rjvm.PeerGoneException:
          > > > - with nested exception:
          > > > [java.io.EOFException]
          > > > Thu Apr 26 00:14:16 GMT 2001:<E> <ConMan> Attempt to sendMsg using a
          > closed
          > > > connection
          > > > Thu Apr 26 00:14:16 GMT 2001:<E> <RJVM> Exception on send :
          > > > weblogic.rmi.ConnectException: Attempt to sendMsg using a closed
          > connection
          > > >
          > > > Please help me
          > > > thanks
          > > > andrew
          > >
          > > --
          > > /\/\i|<e
          > >
          > > Mike Kincer
          > > Solutions Developer/Engineer
          > > Atlas Commerce "ebusiness evolved"
          > > Office phone: +1-607-741-8877
          > > mailto:[email protected] [http://www.atlascommerce.com]
          > >
          > >
          /\/\i|<e
          Mike Kincer
          Solutions Developer/Engineer
          Atlas Commerce "ebusiness evolved"
          Office phone: +1-607-741-8877
          mailto:[email protected] [http://www.atlascommerce.com]

Help - Mac Mini does not boot after re-install of OS X

Hi,
I have a Mac Book Pro and Mac Mini. I needed to reinstall my Mac Mini but lost the install disks. The install disks of the Macbook do not work (machine specific). So what I did was boot the Mac Mini in firewire target mode and installed OS X to it from the Macbook. Worked ok. Except for one thing: The Mac mini does not boot the fresh OS X installation. I get a blinking folder icon with a question mark on top of it.
I booted from the Mac OS X install disk, repaired disk permissions etc. and tried to use the "Startup Disk" utility to select the hard drive as a boot device. But that utility does not offer me to select the hard disk, it doesn't even show up (while DiskUtility can perfectly see it).
Any hints for me? I am pretty much stuck right now.
Thanks

Well, see, the fact that it wouldn't let you boot from the MacBook install disks should have been your first clue to not try to do it. There's a reason it wouldn't let you. The MacBook install disks contain a version of the OS specific to the MacBook, in order to prevent people doing what you just tried to do (ie, installing the same copy of the OS on multiple machines).
If you don't have the Mac Mini system disks any more, you'll have to go buy a copy of OS X. You could also ask for help from an Apple Store, if there's one in your area, but I honestly don't know if they would give you new disks. I would think they should (for a small fee), since Mac Mini system disks would be useless to anyone who didn't already own a Mac Mini, but you never know.

Firefox will not open after fresh install in OSX Lion. "Firefox profile missing."

After recently upgrading OS X Snow leopard to OS X 10.7 Lion I downloaded and ran the Firefox installer package, only to find that Firefox could not open. The error message says "Profile missing – Your Firefox profile cannot be loaded. It may be missing or inaccessible"
I checked Firefox forums and found a script that when run in Terminal allows access to the (upper) Library folder; but this still does not solve the issue.
Obviously, with Lion Apple has deliberately placed a stumbling block in the way of would-be Firefox users.

Thank you. I solved the dilemma, which was one of my own making although I take no blame for it. You see, a while back I grew tired of going through the semantics of manually deleting Caches and Cookies and simply locked those folders (in Users/my name/Library) so that nothing could be added or removed from them without login credentials.
. . . There's where the fly got into the ointment. The Caches folder must be unlocked in order to run Firefox because it uses Caches to store files. Folder unlocked – problem solved.
It seems that OS X Lion has more warts than its predecessors (initially, at least), in that where Apple once gave the user full egress to all venues, it has developed a hard-nosed, up-in-your-face micro-managerial stance with Lion – such as making the System/Library invisible. This, of course, under the tacit label of "offering the user greater security" . . . against himself.
If you fully embrace that logic I've got some s. Florida realty I can dump I mean sell you on the cheap, lol.
I appreciate your kind help.
Thanks.
mike4444

FireFox has stopped working and will not run after fresh install

Yesterday I noticed that the address bar was not working and the graphics were not being shown correctly. When I typed in the address bar it would no atuto complete and even if i typed yahoo.com nothin would happen. The only way I could go to a website was to use my bookmarks.
I did a fresh install and now it doesn't work at all. So, I uninstalled firefox and then did a fresh install. Sill nothing. IE, Chrome, and Safari work fine.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up

Spotlight not working after fresh install of Mac OS X

Hi,
I have erased and installed the Mac OS X on my powerbook and spotlight is not working. I have tried almost all the solutions provided on the forum.
I have tried adding the root drive to the privacy section of the spotlight preferences but it doesn't list the drive at all.
I have tried using spotless, Yasu, Cache out X, deleted the spotlight.plist file
Nothing works! It should be working after a fresh install. My computer just came back after a hard drive replacement and the spotlight wasn't working even then. I thought a fresh install of the OS would help, but can't get it to work.
Can anynody suggest anything? Your help would be highly appreciated.
Thanks,
Aditya

Hi Tom,
Thanks for the reply and the link.
I re-installed the OS again! This time using the UNIX file system setting during installation. Then when I booted my computer, Spotlight worked like a dream. But then I connected my external firewire hard disk and it stopped working!
Is there a work around for this, can I get spotlight to work again?
Thanks,
Aditya

Leopard not restarting after fresh install...

Hi All,
I have a PowerBook G4 with 2GB of RAM. I bought a box version from the Apple store. I did a fresh install, wiped out everything, and followed the instructions. At the end of the install, it tell me "Rebooting in 30 sec." If I click on the restart button or wait for the clock to run down, i get the same effect. It tried to shutdown, but get stuck at the dark grey screen with the pointer. If I hold down the power button and turn off, then power back up, i get a folder icon flashing and then the light grey screen with the apple logo, but nothing else is happening. What can i do to get this to work.
John

Hi John,
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
   2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
      *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
   3. Click the Erase tab.
   4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
   5. Select your Mac OS X volume.
   6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase, one pass... after completion hopefully you'll be able to get a good install.
after highlighting the drive, click on the Partition tab, Options button will be down below.

My wireless card does not work after re installing windows 8 !!

I suppose my card manufacturer is realtek and my card driver is gemtek my network adapter driver I've downloaded and installed it my nothing happens. In my device manager there is no wireless card please help me!!!!!!
My system says no wireless card detected my PC was dos based and when I installed windows 7 everything just went fine. After some days it was formatted and again I installed windows 7 ultimate but my wifi adapter and card was not in the device manager. Please help me!!

my pc is lenovo c320 aio
intel g630, 2gb ram, dvd r/w, realtek gbe ethernet controller, usb 2.0x5 ports, keyboard and mouse

IPad iMessage does not work after ios6 installed

Tried setting and turn on iMessage also FaceTime sign out

Just Reboot and sign in again to you apple account. If this may not work reset your nwtwork settings.

Xorg does not start on fresh install

Hi,
I followed the steps on https://wiki.archlinux.org/index.php/Beginners'_Guide
I managed to finish the install successfully, but startx gives me a headache.
The error log is at https://gist.github.com/4147605
Hardware: HP Pavilion DV6000 with an NVidia card. Using 64 bit installation.
Any idea what went wrong?
Thanks!
Last edited by vitya (2012-11-26 16:35:13)

Your video drivers aren't being loaded properly. Are you trying to use the nvidia or nouveau drivers? Personally I'd recommend the latter to start. Which driver packages did you install? The following command will tell you if you aren't sure:
pacman -Qs xf86-video
Last edited by Trilby (2012-11-26 16:52:30)

To Apple engineers: Home sharing and wifi sync not working after fresh install

Have been using wifi sync and home sharing on my Macbook 5,1 since its early debut.
Since Macbook 5,1 is old i am using it to stream MP4 files to my Apple TV.
The functionality has been working fine throughout the OSX iterations; then came Mavericks.
Now my iTunes library will not sync with Apple TV3, nor will my iPhone 5/iPad 3 wirelessly sync with my iTunes library.
For some reason since upgrading to Mavericks the thing wont work under normal boot.
Restarting in Safe mode solves the problem. Assuming it was some erroneous configuration i went through troubleshooting steps to try and resolve it.
First i uninstalled any third party apps.
Then i repaired, went through Maintenance and Cleaning of the system using Onyx
Then i tried manually removing third party boot kexts from the System Library and user Library
Then i tried reinstalling OSX via the recovery partition (cmd+r on boot time)
Finally i tried a full system erase and reinstall via an external bootable Mavericks USB.
After all these steps the problem persists.
There should be no hardware failure since it works fine in Safe mode and doing a clean install verifies that there are no third party conflicts with the system since iTunes was executed immediately after booting up for the first time.
This raises the concern that there seems to be some sort of system kext misconfiguration by the Apple engineers.
When executing iTunes the following errors are being displayed in the system log (via Console):
22/07/14 20:09:41,949 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 1
22/07/14 20:09:41,954 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 2
22/07/14 20:09:41,958 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 3
22/07/14 20:09:41,962 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 4
22/07/14 20:09:41,966 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 6
22/07/14 20:09:41,970 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 7
22/07/14 20:09:41,974 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 8
22/07/14 20:09:41,978 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 9
22/07/14 20:09:41,982 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 10
22/07/14 20:09:41,987 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 11
22/07/14 20:09:41,991 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 12
22/07/14 20:09:41,995 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 13
22/07/14 20:09:41,999 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 14
22/07/14 20:09:42,004 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 15
22/07/14 20:09:42,008 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 16
22/07/14 20:09:42,012 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 17
22/07/14 20:09:42,016 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 18
22/07/14 20:09:42,020 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 19
22/07/14 20:09:42,024 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 20
22/07/14 20:09:42,028 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 21
22/07/14 20:09:42,032 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 22
22/07/14 20:09:42,036 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 23
22/07/14 20:09:42,041 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 24
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980CD60 Christophoross-MacBook.local. (AAAA) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980D1F0 2.0.6.6.4.5.E.F.F.F.2.1.3.2.2.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA016F60 Christophoross-MacBook.local. (Addr) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA0173F0 5.1.168.192.in-addr.arpa. (PTR) that's already in the list
22/07/14 20:09:43,088 com.apple.usbmuxd[42]: LOCKDOWN_V2_BONJOUR_SERVICE_NAME is _apple-mobdev2._tcp,921707f2
22/07/14 20:09:43,140 xpcd[196]: restored permissions (100600 -> 100700) on /Users/christophoros/Library/Containers/com.apple.MediaLibraryService/Container.plist
22/07/14 20:09:43,466 com.apple.SecurityServer[14]: Session 100020 created
I hope someone came across a similar issue and has some light to shed on the matter.
This has been ongoing since Mavericks came out.
Thanks for reading through

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own"

Itunes will not launch after fresh install and repeated re-installs

I've been browsing around the forums here and the support system hoping for an answer to this question.
On Monday my hard drive died and I had to buy a new one. I reinstalled windows and itunes among other things. I have a brand new Video Ipod as well. I haven't even had a chance to plug it in!
Itunes worked for about 2 days and suddenly stopped working. I mean literally, if I double click on the icon and start up the program, it immediately crashes and asks me if I want to send an Error report.
I removed and reinstalled and rebooted about 3 times to no avail. I re-downloaded Itunes + quicktime just in case there was something wrong with the installer. This did not fix the problem.
I then tried messing with my "sound" settings as suggested by support and people on the forums. I can not find the option to change my sound output to 1400000khz or whatever. Nor does changing my system to "Speaker mode headphones" fix the issue as suggested by apple here:
http://docs.info.apple.com/article.html?artnum=304318
Quicktime is also screwed up and will not load on websites. It shows an icon in my taskbar but when I click on it, nothing happens. Even if Itunes is uninstalled, the icon still shows up in the tray. I cannot delete the folders or find any option in Uninstall programs to remove it.
As a last resort, I rolled my system back to Monday when I had just installed Windows, default drivers and SP2. A clean system. I then installed Itunes as the very first program and surprise - it crashed upon opening.
I have no idea what to do at this point. Without Itunes my ipod is almost usless.

The quote below is from a previous thread where several people solved your same problem with the stated technique. Maybe it will work for you. Good Luck.
iTunes 7.0.2 FIX ("Have tried all 'fixes' suggested but iTunes STILL not opening").
1. Uninstall iTunes and QuickTime.
2. Do a search in the C:\ drive for "QuickTime". Delete EVERYTHING that pops up.
3. Restart the computer.
4. Install QUICKTIME ONLY
5. THEN install iTunes......and IT WORKS.....Just remember to install QuickTime FIRST.

Ohasd not starting after fresh install

Hi,
I have installed Oracle Database 11g Release 11.2.0.1.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options on SUSE Linux Enterprise Server 11 (x86_64) 11.0.
After installation all cluster and resources were up, I could log in to database. I have restarted orcl1 node, and after boot the ohasd service is not started. Same is with orcl0 node. When I start manually, the cluster comes up. See below:
grid@orcl1:~> crsctl check has
CRS-4639: Could not contact Oracle High Availability Services
orcl1:~ # ps aux | grep ohasd
root      5157 0.0 0.0 11224 1448 ?        Ss   03:02   0:00 /bin/sh /etc/init.d/init.ohasd run
root      5365 0.0 0.0   4316   756 pts/0    S+   03:02   0:00 grep ohasd
orcl1:~ # chkconfig ohasd
ohasd on
orcl1:~ # service ohasd start
Starting ohasd:
orcl1:~ #
orcl1:~ # CRS-4123: Oracle High Availability Services has been started.
orcl1:~ # ps aux | grep ohasd
root      5157 0.0 0.0 11224 1464 ?        Ss   03:02   0:00 /bin/sh /etc/init.d/init.ohasd run
root      5414 3.3 0.3 569056 47124 ?        Ssl 03:03   0:01 /u01/app/11.2.0/grid/bin/ohasd.bin reboot
root      5736 0.0 0.0   4316   752 pts/0    S+   03:03   0:00 grep ohasdThen within short time everything is started up...
Anyone has idea why ohasd service is not started automatically ?
Update:
I have changed /etc/init.d/ohasd file so that it 'logs' to /tmp time when invoked (see below the code). After reboot there is no record of startup /tmp/ohasd*
orcl1:~ # chkconfig --list ohasd
ohasd                     0:off 1:off 2:off 3:on   4:off 5:on   6:off
# This script is invoked by the rc system.
/bin/touch /tmp/ohasd.start."`date`"    # <<<--- added line to 'log' the start
ORA_CRS_HOME=/u01/app/11.2.0/gridThanks !
Edited by: kamilp on Feb 17, 2013 11:35 PM

Hi,
there are two scripts - both installed by installer, I have not changed anything...
orcl1:~ # l /etc/init.d/*ohasd*
-rwxr-xr-x 1 root root 3079 Feb 18 00:37 /etc/init.d/init.ohasd*
-rwxr-xr-x 1 root root 2632 Feb 18 11:27 /etc/init.d/ohasd*
orcl1:~ # l /etc/init.d/rc5.d/*ohasd*
lrwxrwxrwx 1 root root 17 Feb 18 00:37 /etc/init.d/rc5.d/S96ohasd -> /etc/init.d/ohasd*
orcl1:~ # head -10 /etc/init.d/ohasd
#!/bin/sh
# Copyright (c) 2001, 2009, Oracle and/or its affiliates. All rights reserved.
# ohasd.sbs - Control script for the Oracle HA Services daemon
# This script is invoked by the rc system.
ORA_CRS_HOME=/u01/app/11.2.0/grid
orcl1:~ # head -10 /etc/init.d/init.ohasd
#!/bin/sh
# Copyright (c) 2001, 2009, Oracle and/or its affiliates. All rights reserved.
# init.ohasd - Control script for the Oracle HA services daemon
# This script is invoked by the init system

SQl 2008 R2 Failover Cluster does not failover after fresh install

Similar Messages

Maybe you are looking for