SQL 2012 connection not showing in SAP Lumira after downloading and installing the driver
Hello,
I am very new to SAP Lumira. I followed the steps in the videos to install the SQL 2012 JDBC drivers. I downloaded the drivers from Microsoft installed them in the %program files% folder as suggested by Microsoft.
I then followed the instructions for installing the drivers in SAP Lumira and the option to select SQL when Acquiring data is still grayed out.
Any help is appreciated.
I am running SAP Lumira version 1.21.0 build 49. This is the desktop version running on Windows 8.1.
Thanks again for any help.
Nelson
Hi
Which Edition of Lumira are you using?
SAP Lumira Desktop Personal Edition or SAP Lumira Desktop Standard Edition ?
If I remember correctly I got this option turned on only when I converted my personal edition to a standard edition by applying a key. I could install sql server 2012 JDBC driver by pointing to the correct Jar file in the %program files% folder. This was then available for me to select when adding a Data set. Regards AG
Similar Messages
-
Windows XP SP 3 does not recognize HP Scanjet 3770 after downloading and installing driver
Hello !
I have a second hand HP Scanjet 3770 scanner.
After downloading and installing driver there is only 1 icon on my desktop - Image Zone.
There is not icon of HP Director software, neither on desktop nor in C:\Program files\HP folder
Windows XP SP 3 does not recognize HP Scanjet 3770 after downloading and installing driver (Image Zone software)
There is another scanning HP device installed on the same computer - all-in-one HP Photosmart C 4280
What I have to do ?
Thank you !Some things that pop in my head- your CD/DVD drive may need cleaning (laser eye). There are discs to do this or you can use a cotton swab sometimes to wipe the laser. OR- the last recovery may have been the last fatal strain on the CD/DVD drive and it is now not functioning. Maybe you could borrow the drive from the other Dv4 and try it- or borrow/buy a USB CD/DVD drive to try.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Background: our desktop computer started shutting off sporadically. I researched the problem, reset the memory chip, checked battery voltage on the motherboard (it was okay), resinserted the battery and tried to boot. It started up successfully and connected to the internet via our DSL line. FF had trouble opening pages due to security certificates so I checked to see if upgrades were available (3.6.8 was) and I downloaded and installed it. After that it refused to work. Apparently a setting somewhere got changed but I don't know what it might be. The DSL connection works with other computers which are wireless (the desktop has a hard connection.) Operating system is Windows XP. Other browsers do not work.
Turn off your firewall and antivirus software.
-
I m using iPhone 3gs (ios5.1.1) but today I update it to ios 6.1.3 after the update it got suckon " connect to itunes " symble. And when I was trying to connect it to iTunes it showed restore and update? When I selected that it start downloading ios 6.1.3 on iTunes . I m unable to use my iPhone what to do pls tell me?
Unable to Update or Restore..?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743 -
Music not showing up in library after drag and drop (7.0)
Music will not show up in library after draging and dropping .mp3's into itunes. Also won't show up if I try the File > Add Folder to Library. The processing files box shows up like its going to work, but it just doesn't. I have tried many differnet mp3's, some actually DID import.
Also, double clicking on an mp3 will bring up itunes, but it will not load or play the song.
I currently have 55.5GB of music, and 10,158 songs. Not sure if that has anything to do with it.
xw8200 HP Windows 2000Try holding down the Shift key in Windows when launching iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. The default location for your iTunes library is in \Documents and Settings\Username\My Documents\My Music\iTunes\. Look in there and see if you have more than one library file (they have the extension .itl) If you have more than one try opening them in turn, you may find your original library is still intact: How to open an alternate iTunes Library file
-
I downloaded and installed the latest update on my Ipad and now it will not power on. It shows I tunes and a power cord. What should I do?
Hey kfortnt2,
Thanks for the question. I understand you are experiencing issues after updating your iPad. The following resource outlines the screen you are seeing, and a potential resolution:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
Some computers download and install the two approved updates, others only download Windows Update Agent and not the approved updates.
UN-successful Windows Update Log:
2014-05-07 09:33:56:180
1036 e70
Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-05-07 09:33:56:220
1036 e70
Misc = Process: C:\Windows\system32\svchost.exe
2014-05-07 09:33:56:221
1036 e70
Misc = Module: c:\windows\system32\wuaueng.dll
2014-05-07 09:33:56:180
1036 e70
Service *************
2014-05-07 09:33:56:221
1036 e70
Service ** START ** Service: Service startup
2014-05-07 09:33:56:222
1036 e70
Service *********
2014-05-07 09:33:56:544
1036 e70
Agent * WU client version 7.6.7600.256
2014-05-07 09:33:56:545
1036 e70
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-05-07 09:33:56:546
1036 e70
Agent * Access type: No proxy
2014-05-07 09:33:56:547
1036 e70
Agent * Network state: Connected
2014-05-07 09:33:57:315
1036 e70
Setup Service restarting after SelfUpdate
2014-05-07 09:33:57:545
1036 e70
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 09:33:57:592
1036 e70
Report CWERReporter::Init succeeded
2014-05-07 09:33:58:326
1036 e70
Report *********** Report: Initializing static reporting data ***********
2014-05-07 09:33:58:376
1036 e70
Report * OS Version = 6.1.7601.1.0.65792
2014-05-07 09:33:58:376
1036 e70
Report * OS Product Type = 0x00000030
2014-05-07 09:33:58:394
1036 e70
Report * Computer Brand = Hewlett-Packard
2014-05-07 09:33:58:444
1036 e70
Report * Computer Model = HP Compaq 4000 Pro SFF PC
2014-05-07 09:33:58:455
1036 e70
Report * Bios Revision = 786H7 v02.00
2014-05-07 09:33:58:504
1036 e70
Report * Bios Name = Default System BIOS
2014-05-07 09:33:58:554
1036 e70
Report * Bios Release Date = 2011-01-31T00:00:00
2014-05-07 09:33:58:554
1036 e70
Report * Locale ID = 1033
2014-05-07 09:34:03:562
1036 f08
Report REPORT EVENT: {082D455B-6E51-4238-A997-1D27D9214A72}
2014-05-07 09:33:58:565-0400 1
199 101
{0011B9ED-9189-4D58-BE25-FA2F13FC3D6C}
1 240005
SelfUpdate Success
Content Install Installation successful and restart required for the following update: Windows Update Aux
2014-05-07 09:34:03:614
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:34:42:049
1036 e70
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-05-07 09:34:42:049
1036 e70
Agent *********** Agent: Initializing global settings cache ***********
2014-05-07 09:34:42:049
1036 e70
Agent * WSUS server: http://csd26.csd.local:80
2014-05-07 09:34:42:049
1036 e70
Agent * WSUS status server: http://csd26.csd.local:80
2014-05-07 09:34:42:049
1036 e70
Agent * Target group: CO
2014-05-07 09:34:42:049
1036 e70
Agent * Windows Update access disabled: No
2014-05-07 09:34:42:063
1036 e70
DnldMgr Download manager restoring 0 downloads
2014-05-07 09:34:42:089
1036 e70
AU ########### AU: Initializing Automatic Updates ###########
2014-05-07 09:34:42:089
1036 e70
AU AU setting next detection timeout to 2014-05-07 13:34:42
2014-05-07 09:34:42:090
1036 e70
AU AU setting next sqm report timeout to 2014-05-07 13:34:42
2014-05-07 09:34:42:090
1036 e70
AU # WSUS server: http://csd26.csd.local:80
2014-05-07 09:34:42:090
1036 e70
AU # Detection frequency: 22
2014-05-07 09:34:42:090
1036 e70
AU # Target group: CO
2014-05-07 09:34:42:090
1036 e70
AU # Approval type: Scheduled (Policy)
2014-05-07 09:34:42:090
1036 e70
AU # Scheduled install day/time: Every day at 3:00
2014-05-07 09:34:42:090
1036 e70
AU # Auto-install minor updates: Yes (User preference)
2014-05-07 09:34:42:105
1036 e70
AU Initializing featured updates
2014-05-07 09:34:42:116
1036 e70
AU Found 0 cached featured updates
2014-05-07 09:34:42:116
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:34:42:117
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:34:42:117
1036 e70
AU AU finished delayed initialization
2014-05-07 09:34:42:117
1036 e70
AU AU setting next sqm report timeout to 2014-05-08 13:34:42
2014-05-07 09:34:42:117
1036 e70
AU #############
2014-05-07 09:34:42:117
1036 e70
AU ## START ## AU: Search for updates
2014-05-07 09:34:42:117
1036 e70
AU #########
2014-05-07 09:34:42:291
1036 e70
AU <<## SUBMITTED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:34:42:341
1036 f08
Agent *************
2014-05-07 09:34:42:341
1036 f08
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 09:34:42:341
1036 f08
Agent *********
2014-05-07 09:34:42:341
1036 f08
Agent * Online = Yes; Ignore download priority = No
2014-05-07 09:34:42:341
1036 f08
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-05-07 09:34:42:341
1036 f08
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-05-07 09:34:42:341
1036 f08
Agent * Search Scope = {Machine}
2014-05-07 09:34:42:341
1036 f08
Setup Checking for agent SelfUpdate
2014-05-07 09:34:42:342
1036 f08
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 09:34:42:349
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-05-07 09:34:42:392
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:669
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-05-07 09:34:44:676
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:754
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-05-07 09:34:44:777
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:781
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-05-07 09:34:44:788
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:837
1036 f08
Setup Determining whether a new setup handler needs to be downloaded
2014-05-07 09:34:44:855
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2014-05-07 09:34:44:862
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:862
1036 f08
Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe are not trusted: Error 0x800b0001
2014-05-07 09:34:44:862
1036 f08
Setup WARNING: Trust verification failed for WuSetupV.exe. It will be deleted and downloaded, error = 0x800B0001
2014-05-07 09:34:44:863
1036 f08
Setup SelfUpdate handler update required: Current version: 7.6.7600.256, required version: 7.6.7600.256
2014-05-07 09:34:44:873
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:44:932
1036 f08
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:44:933
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:45:048
1036 f08
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:45:048
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:45:234
1036 f08
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:45:235
1036 f08
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-05-07 09:34:48:415
1036 f08
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-05-07 09:34:48:415
1036 f08
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
2014-05-07 09:34:48:424
1036 f08
PT WARNING: Cached cookie has expired or new PID is available
2014-05-07 09:34:48:424
1036 f08
PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
2014-05-07 09:34:48:424
1036 f08
PT Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
2014-05-07 09:34:48:454
1036 f08
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-05-07 09:34:48:454
1036 f08
PT WARNING: SOAP Fault: 0x00012c
2014-05-07 09:34:48:454
1036 f08
PT WARNING: faultstring:Fault occurred
2014-05-07 09:34:48:454
1036 f08
PT WARNING: ErrorCode:ConfigChanged(2)
2014-05-07 09:34:48:454
1036 f08
PT WARNING: Message:(null)
2014-05-07 09:34:48:454
1036 f08
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2014-05-07 09:34:48:454
1036 f08
PT WARNING: ID:cb5babad-3a1d-4e6b-946e-736ed4746e3f
2014-05-07 09:34:48:464
1036 f08
PT WARNING: Cached cookie has expired or new PID is available
2014-05-07 09:34:48:464
1036 f08
PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
2014-05-07 09:34:48:464
1036 f08
PT Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
2014-05-07 09:35:06:497
1036 e70
AU Forced install timer expired for scheduled install
2014-05-07 09:35:06:497
1036 e70
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-05-07 09:35:06:497
1036 e70
AU Setting AU scheduled install time to 2014-05-08 07:00:00
2014-05-07 09:35:06:498
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:14:236
1036 f08
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-05-07 09:35:14:236
1036 f08
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
2014-05-07 09:35:20:118
1036 f08
Agent * Found 0 updates and 79 categories in search; evaluated appl. rules of 859 out of 1494 deployed entities
2014-05-07 09:35:20:194
1036 f08
Agent *********
2014-05-07 09:35:20:194
1036 f08
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 09:35:20:194
1036 f08
Agent *************
2014-05-07 09:35:20:209
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:35:20:209
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:35:20:209
1036 bb8
AU >>## RESUMED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:35:20:209
1036 bb8
AU # 0 updates detected
2014-05-07 09:35:20:209
1036 bb8
AU #########
2014-05-07 09:35:20:209
1036 bb8
AU ## END ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:35:20:209
1036 bb8
AU #############
2014-05-07 09:35:20:210
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:20:210
1036 bb8
AU Featured notifications is disabled.
2014-05-07 09:35:20:211
1036 bb8
AU AU setting next detection timeout to 2014-05-08 11:19:46
2014-05-07 09:35:20:211
1036 bb8
AU Setting AU scheduled install time to 2014-05-08 07:00:00
2014-05-07 09:35:20:212
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:20:212
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:25:183
1036 f08
Report REPORT EVENT: {C1B39107-F517-4477-AAE3-9B1F1D6002BF}
2014-05-07 09:35:20:193-0400 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 0 updates.
2014-05-07 09:35:25:183
1036 f08
Report REPORT EVENT: {669B9537-BB71-4190-BA58-A97F725AE4D8}
2014-05-07 09:35:20:194-0400 1
156 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Pre-Deployment Check
Reporting client status.
2014-05-07 09:35:25:184
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:37:32:440
1036 f08
Report Uploading 3 events using cached cookie, reporting URL = http://csd26.csd.local:80/ReportingWebService/ReportingWebService.asmx
2014-05-07 09:37:32:454
1036 f08
Report Reporter successfully uploaded 3 events. -
After downloading and installing OS X Update 10.10.3 I am not able to open my Phot App. It opens and immediately shuts down. I've sent messages to Apple for help and no answers. Help!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Adobe Connect 8, do you we still need to download and install the add-in
Hi,
In the new version of Adobe Connect 8 do you we still need to download and install the add-in on the PCs so that I can share the screen?
If so can you give me the URL?
Thank you
Will the old URL still work?
ChipYes, the Adobe Connect Add-In is for Hosts and Presenters always. However, even attendees may be required to install the Add-In if the Host has used the Enhanced Audio option preference to improve VOIP audio. In that case the Attendees need the Add-In to get that functionality.
Understand the Add-In is required because Adobe Flash Player does not have the feature set as native code. The Adobe Connect product team needs to add those features to the Flash player so Adobe Connect will have those capabilities. Maybe one day the Flash player will include those capabilities as native functions but that is a deeper discussion for another day.
The new Adobe Connect Add-Ins were posted a few weeks ago for Adobe Connect 8 SP1 and all versions of Connect. It is recommended those be used and significant improvement has been made in the features of the Add-in. They are posted here:
http://www.adobe.com/special/adobeconnect/migration/index.html -
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
I have the iPhone 4S and have received a notice in the "settings" area indicating a "General" Software Update is available concerning fixes of bugs etc. I am sitting right next to my wi-fi network and am still unable to download and install the iOS7.0.2 download. You have a website listed on the window but that appears to be a non existant site and I cannot even communicate my problems to you via that site. What the heck is happening? Why do you send me boggus info to download and then not allow me the opportunity to do so? I never had these types of problems with SAMSUNG!
Wendell J. Putnam
President - Cardell Enterprises 719 339-4792Okay genius, try reading before posting.
These are user to user technical support forums.
No one here sent you any notification or posted any such website.
Plug the device into a computer running iTunes and update. -
I just downloaded and installed the new iTunes on a Toshiba Satelite of some age. It was just completely reformated and updated with XP. iTunes will not open. The terms page comes up and when I agree it disappears. I have uninstalled and reinstalled.
Perhaps something here will help:
http://support.apple.com/kb/TS1421
Regards. -
After downloading and installing software for AirPortExtreme, Skype will not open.
After downloading and installing new software for AirPort Extreme from the Appstore, Skype will not open.
Did you repair permissions and restarted your computer after the installation?
Skype has their own forums for Mac users. You should post there if the above does not work. -
After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity.
Right before i installed the additional content I was working on a project, and everything was OK. What is wrong. How do I make Logic reconnect to the instrument files?Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer. -
I have downloaded and installed the new ios7 software on my iphone 4s but im having trouble getting through the activation process i keep getting the message "iphone could not be activated because the activation server cannot be reached"? any suggestions?
The activation servers are probably overloaded with everyone trying to update to iOS 7 today. You might need to wait and try again later.
Maybe you are looking for
-
Supported Printer not showing in list of drivers after software update
Hi, I'm trying to install a supported printer HP LaserJet M1132 (M1130 Series) to my Mac Book Pro Retina (Mavericks) both directly using USB and on a network connected to a Windows XP Server. I started by performing a software update and downloaded a
-
Is there any report that tells that what is the excise amt with reference to GRN.\ Plz guide
-
My Iphone 4 is stolen, what should I do?
Hi, Please can you help me with my problem cause my Iphone 4 is stolen and don't know what to do about that? best regards,
-
Hi, I have a simple problem : I have a war file with a simple jsp in. If the name of war file is less than three characters, i can't called the JSP (HTTP 404) But if it's more than 3, it's work !!! Conf : Weblogic v6.1 Windows Why ? Thanks in advance
-
Hp Pavillon a6102.uk upgrade graphics card
hi, i have a Hp Pavillon a6102.uk. [email protected], memory 1.50GB. I want to upgrade the graphics card so i am able to play games on the computer. there is a intel(R) graphics media 82945g express chipset family installed. the game i'm playing say