SQL 2012 Enterprise SP1 installation for SCCM 2012 R2

I am just starting to install SQL 2012 with SP1 Enterprise for SCCM 2012 R2.
Does anyone have a step by step guide for this install please
I am planning to install SQL 2012 with SP1 Enterprise as a physical install which I intend to geo cluster later on
Also I am thinking of installing WSUS on a separate server and get my SCCM 2012 servers (1 primary and 3 secondary) to use this server - would appreciate some help on how this can be setup as well

That doesn't make sense to me. Both versions are fully supported on virtual and physical platforms.
Also, I'm with Garth - local SQL all the way.
Here are my thoughts on the subject
http://www.gerryhampsoncm.blogspot.ie/2013/10/configmgr-sql-some-tips.html
ConfigMgr is not a real-time product like Exchange, for example. A certain amount of downtime can be tolerated. I would spend more time implementing a robust backup solution, rather than trying to implement high availability.
You should be able to recover a ConfigMgr site from SQL backup in a couple of hours.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

  • Cumulative Update 4 installation for SCCM 2012 R2

    Hi all,
    This is  my first time installing a CU update on SCCM 2012.
    We have an environment with 15 Servers, 1 is a Primary and the other are Site System Servers.
    Would I need to install the CU4 update only to the Primary server? or would I have to deploy the CU4 to the other 14 Site Systems Servers.
    I've been reading the following
    http://support.microsoft.com/kb/3026739
    http://dekeukelaere.com/2014/01/30/implementing-configuration-manager-2012-sp1-cumulative-update-4/
    http://blogs.technet.com/b/configurationmgr/archive/2014/01/29/now-available-cumulative-update-4-for-system-center-2012-configuration-manager-service-pack-1.aspx
    And also if they don't have CU3 on them would I need to do that first, or would
    CU4 encompass previous updates.
    Cheers for any help on this matter.

    When they're only site systems with a role installed than those roles will be upgraded with the primary site installation. Here is one of the many nice posts about the installation process (and order):
    http://www.scconfigmgr.com/2015/02/03/install-configmgr-2012-r2-cu4-in-your-hierarchy/
    Also, you don't have to install CU3 first.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • SP1 download for SCCM 2012

    My question might seem like a dumb one but how do I go about downloading the SP1 update to our SCCM server?  Is this an standalone installer I can get from MS's website or is it only on the ISO on our VL site (which is the only place I'm seeing it)

    Hi Friend,
    I'm planning to deploy SCCM 2012 r2 in my domain but unable to download by available link on microsoft portal. please help me to get a ISO for above application.
    thanks & best regards,
    Nirbhay
    http://www.microsoft.com/en-us/evalcenter/evaluate-system-center-2012-r2-configuration-manager-and-endpoint-protection
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How to Custom Report using sql server report builder for SCCM 2012 SP1

    Hi ,
    I am new to database, if i want to create a manual report using sql server report builder for SCCM 2012 SP1, what step should i take.
    i want to create a report in which computer name, total disk space, physical disk serial no come together. i already added class (physical disk serial no.) in hardware inventory classes. refer snapshot

    Hi,
    Here is a guide on how to create custom reports in Configuration Manager 2012, it is a great place to start, change to the data you want to display instead.
    http://sccmgeekdiary.wordpress.com/2012/10/29/sccm-2012-reporting-for-dummies-creating-your-own-ssrs-reports/
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • ERROR: Failed to update prerequisite results into the registry; error = 1 for sccm 2012 secondary site installation

    Hi,
    We try to install sccm 2012 serondary site in server 2012. It always failed.
    I used the rereqchek tools to check system enviroment locally. All passed.
    The primary site installed in server 2012.  Both server had granted the administrator permission.
    Anyone can help to check the below Configmgrprereq.log
    <01-16-2015 08:47:55> ********************************************
    <01-16-2015 08:47:55> ******* Start Prerequisite checking. *******
    <01-16-2015 08:47:55> ********************************************
    <01-16-2015 08:47:55> Commandline :
    "D:\Microsoft Configuration Manager\bin\x64\smsexec.exe"
    <01-16-2015 08:47:55> Check Type: Secondary site
     Site Server: DPServer.ms.com,
     SQL Server: DPServer.ms.com,
     SQL Named Instance: ,
     Install Folder: d:\Program Files\Microsoft Configuration Manager\,
     Setup Source Folder: D:\SCCM2012\Source
    <01-16-2015 08:47:55> INFO: Executing prerequisite functions...
    <01-16-2015 08:47:55> ===== INFO: Prerequisite Type & Server: SITE_SEC:DPServer.ms.com =====
    <01-16-2015 08:47:55> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:47:55> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:47:55> INFO: CheckLocalSys is Admin of <DPServer.ms.com>.
    <01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights on
    the SQL Server and management point computers.
    <01-16-2015 08:48:08> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:48:08> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:48:08> INFO: Check Lanman service: <DPServer.ms.com>.
    <01-16-2015 08:48:22> DPServer.ms.com;    Check Server Service is running;    Passed
    <01-16-2015 08:48:30> INFO: OS version:0, ServicePack:0.
    <01-16-2015 08:48:30> DPServer.ms.com;    Unsupported site server operating system version for Setup;    Error;    Configuration Manager site systems can only be installed on systems running Windows Server
    2008 SP2 or later.
    <01-16-2015 08:48:34> INFO: Failed to get Active Directory membership information for computer DPServer.ms.com with 0.
    <01-16-2015 08:48:34> DPServer.ms.com;    Domain membership;    Error;    Configuration Manager site server components must be installed on computers that are members of a Windows domain.
    <01-16-2015 08:48:40> INFO: Free disk space on target \\DPServer.ms.com\d$\. = 510158 MB
    <01-16-2015 08:48:40> DPServer.ms.com;    Free disk space on site server;    Passed
    <01-16-2015 08:48:47> DPServer.ms.com;    Pending system restart;    Passed
    <01-16-2015 08:48:50> INFO: The server DPServer.ms.com is not read-only domain controller.
    <01-16-2015 08:48:50> DPServer.ms.com;    Read-Only Domain Controller;    Passed
    <01-16-2015 08:48:50> INFO: Check FQDN Length for site server: <DPServer.ms.com>.
    <01-16-2015 08:48:50> DPServer.ms.com;    Site Server FQDN Length;    Passed
    <01-16-2015 08:48:50> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:48:50> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:48:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60);    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and Configuration Manager site
    server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
    <01-16-2015 08:49:03> DPServer.ms.com;    Microsoft Remote Differential Compression (RDC) library registered;    Error;    Microsoft Remote Differential Compression (RDC) library must be registered for Configuration
    Manager site server installation. Details at http://technet.microsoft.com/library/cc431377.aspx#RDC_for_Site_Servers.
    <01-16-2015 08:49:03> INFO: Checking Windows Installer version on DPServer.ms.com.
    <01-16-2015 08:49:13> INFO: Path of Windows Installer is <\\DPServer.ms.com\C$\Windows\System32\msi.dll>.
    <01-16-2015 08:49:19> ERROR: Failed to determine Windows Installer version from path:<\\DPServer.ms.com\C$\Windows\System32\msi.dll> .
    <01-16-2015 08:49:19> DPServer.ms.com;    Microsoft Windows Installer;    Error;    Setup failed to verify the Windows Installer version, or the installed version of Windows Installer does not meet the minimum
    requirement.  Configuration Manager requires at least Windows Installer version 4.5.
    <01-16-2015 08:49:19> INFO: Start Checking InstallSQLExpress on site server: DPServer.ms.com, SQL Server instance CONFIGMGRSEC
    <01-16-2015 08:49:28> INFO: SQL Server Instance Names value was not found
    <01-16-2015 08:49:28> INFO: IsPortUsedByAnySqlInstance port 1433.
    <01-16-2015 08:49:39> INFO: TCP port 1433 is not in use by any other SQL Server instances.
    <01-16-2015 08:49:49> INFO: Sql express: OS version:0, ServicePack:0.
    <01-16-2015 08:49:49> ERROR: Cannot install sqlexpress 2012, not meet OS requirement: Windows server 2008 sp2, Windows server 2008 R2 sp1 or higher.
    <01-16-2015 08:49:49> DPServer.ms.com;    SQL Server Express on Secondary Site;    Error;    A SQL Server instance is already installed on the secondary site server using the instance name CONFIGMGRSEC,
    or the specified TCP port is being used by another SQL Server instance, or OS version is not Windows Server 2008 sp2, Windows Server 2008 R2 sp1 or higher. Setup is unable to install SQL Server Express on the secondary site.
    <01-16-2015 08:49:55> ERROR: Failed to connect to registry of DPServer.ms.com
    <01-16-2015 08:49:55> DPServer.ms.com;    Existing Configuration Manager server components on site server;    Error;    A site server or site system role is already installed on the computer selected for
    site server installation. Remove the site or site system role from the computer, or select another computer for site server installation.
    <01-16-2015 08:49:55> DPServer.ms.com;    Firewall exception for SQL Server (stand-alone primary site);    Passed
    <01-16-2015 08:49:55> INFO: SQL Server computer <DPServer.ms.com>
    <01-16-2015 08:49:55> INFO: SQL Server named instance <>
    <01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
    <01-16-2015 08:49:55> DPServer.ms.com;    SQL Server service running account;    Passed
    <01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
    <01-16-2015 08:49:55> DPServer.ms.com;    Dedicated SQL Server instance;    Passed
    <01-16-2015 08:49:55> INFO: CheckSQLCollationSecondary
    <01-16-2015 08:49:55> INFO: Installing SQL Server Express; skipping
    <01-16-2015 08:49:55> DPServer.ms.com;    Parent/child database collation;    Passed
    <01-16-2015 08:49:55> INFO: Checking .NET framework versions 3.5...
    <01-16-2015 08:50:05> INFO: .NET is installed
    <01-16-2015 08:50:05> DPServer.ms.com;    Minimum .NET Framework version for Configuration Manager site server;    Passed
    <01-16-2015 08:50:05> INFO: Checking .NET version required for installing SQL Server Express for Secondary Site.
    <01-16-2015 08:50:05> INFO: Checking .NET framework versions 4.0...
    <01-16-2015 08:50:10> INFO: .NET is installed
    <01-16-2015 08:50:11> DPServer.ms.com;    Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site;    Passed
    <01-16-2015 08:50:11> INFO: CheckInstallSourceVersion <D:\SCCM2012\Source>
    <01-16-2015 08:52:29> ERROR: Could not read install map from \\DPServer.ms.com\D$\\SCCM2012\Source\SMSSETUP\install.map (result 2)
    <01-16-2015 08:52:29> DPServer.ms.com;    Setup Source Version;    Error;    The product version in the source folder specified for secondary site installation does not match the version of the primary site.
    <01-16-2015 08:52:29> INFO:CheckInstallSourcePath <DPServer.ms.com>
    <01-16-2015 08:52:55> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:52:55> DPServer.ms.com;    Setup Source Folder;    Error;    The computer account for the secondary site must have Read NTFS and share permissions to the Setup source folder and share. We
    recommend that you do not use administrative shares (for example, C$ and D$) because they require the secondary site computer account to be an administrator on the remote computer.
    <01-16-2015 08:52:55> INFO: Enter CheckSecSiteSqlOnSameMachine.
    <01-16-2015 08:52:55> INFO: Installing SQL Server Express, skipping SQL Server check.
    <01-16-2015 08:52:55> DPServer.ms.com;    SQL Server on the Secondary Site Computer;    Passed
    <01-16-2015 08:52:55> INFO:CheckSupportedFQDNFormat <DPServer.ms.com>
    <01-16-2015 08:53:04> INFO: NetBIOS <NZWHKVMAS020>
    <01-16-2015 08:53:04> DPServer.ms.com;    Primary FQDN;    Passed
    <01-16-2015 08:53:04> INFO:CheckMachineAccountHasADAccess <DPServer.ms.com>
    <01-16-2015 08:53:30> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:53:30> DPServer.ms.com;    Verify site server permissions to publish to Active Directory.;    Warning;    The site server might be unable to publish to Active Directory. The computer account
    for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure required
    permissions, see http://go.microsoft.com/fwlink/p/?LinkId=233190.
    <01-16-2015 08:53:30> INFO:CheckRemoteWMIConnection <DPServer.ms.com>
    <01-16-2015 08:53:44> DPServer.ms.com;    Remote Connection to WMI on Secondary Site;    Passed
    <01-16-2015 08:53:44> INFO: Check required collation of Sql Server.
    <01-16-2015 08:53:44> INFO: LangID <409>
    <01-16-2015 08:53:44> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
    <01-16-2015 08:53:44> DPServer.ms.com;    Required SQL Server Collation;    Passed
    <01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: SQL:DPServer.ms.com =====
    <01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping check for sysadmin role on SQL Server.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights;    Passed
    <01-16-2015 08:53:44> INFO: Skip testing, no expand primary site specified.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights for reference site;    Passed
    <01-16-2015 08:53:44> INFO: The rule 'Site server computer account administrative rights' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping Windows integrated security check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server security mode;    Passed
    <01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: The rule 'Unsupported site server operating system version for Setup' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server version check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server version;    Passed
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Edition;    Passed
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Tcp Port;    Passed
    <01-16-2015 08:53:44> INFO: Checking if SQL Server memory is limited.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory check.
    <01-16-2015 08:53:44> DPServer.ms.com;    Configuration for SQL Server memory usage;    Passed
    <01-16-2015 08:53:44> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory allocation check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server process memory allocation;    Passed
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server case insensitive validation.
    <01-16-2015 08:53:44> DPServer.ms.com;    Case-insensitive collation on SQL Server;    Passed
    <01-16-2015 08:53:44> INFO: Check Machine FQDN: <DPServer.ms.com>.
    <01-16-2015 08:53:44> INFO: getaddrinfo returned success.
    <01-16-2015 08:53:44> DPServer.ms.com;    Validate FQDN of SQL Server Computer;    Passed
    <01-16-2015 08:53:44> INFO: The rule 'Primary FQDN' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: MP:DPServer.ms.com =====
    <01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:53:44> DPServer.ms.com;    Administrative share (Site system);    Passed
    <01-16-2015 08:53:44> INFO:CheckSiteSystemtoSQLConnectivity <DPServer.ms.com>
    <01-16-2015 08:53:44> INFO: Installing secondary site, skipping SQL Server connectivity check.
    <01-16-2015 08:53:44> DPServer.ms.com;    Site System to SQL Server Communication;    Passed
    <01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: The rule 'Check Server Service is running' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:52> INFO: OS version:0, ServicePack:0.
    <01-16-2015 08:53:52> DPServer.ms.com;    Unsupported management point operating system version for Setup;    Warning;    Configuration Manager site systems can only be installed on systems running Windows
    Server 2008 SP2 or later.
    <01-16-2015 08:53:52> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:05> INFO: Windows Cluster not found on DPServer.ms.com.
    <01-16-2015 08:54:05> DPServer.ms.com;    Windows Failover Cluster;    Passed
    <01-16-2015 08:54:05> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:05> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:54:05> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:54:05> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:10> DPServer.ms.com;    IIS service running;    Warning;    Internet Information Services (IIS) is required for some site system roles. You have selected to install a site system role that
    requires IIS. Install IIS on the site system to continue setup.
    <01-16-2015 08:54:39> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
    <01-16-2015 08:54:39> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
    <01-16-2015 08:54:39> DPServer.ms.com;    BITS installed;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS
    is not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
    if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
    <01-16-2015 08:55:08> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
    <01-16-2015 08:55:08> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
    <01-16-2015 08:55:08> DPServer.ms.com;    BITS enabled;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS is
    not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
    if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
    <01-16-2015 08:55:08> DPServer.ms.com;    IIS HTTPS Configuration for management point;    Passed
    <01-16-2015 08:55:08> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
    <01-16-2015 08:55:08> DPServer.ms.com;    Firewall exception for SQL Server for management point;    Passed
    <01-16-2015 08:55:08> DPServer.ms.com;    Administrative rights on management point;    Passed
    <01-16-2015 08:55:08> INFO:CheckV4ClientNotInstalled <DPServer.ms.com>
    <01-16-2015 08:55:36> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:55:36> DPServer.ms.com;    Client Version on Management Point Computer;    Warning;    You cannot install the management point on a computer with an earlier version of the Configuration Manager
    client installed. Upgrade the client to the current version, remove the client, or select a different computer for the management point installation, and then try again.
    <01-16-2015 08:55:36> ===== INFO: Prerequisite Type & Server: DP:DPServer.ms.com =====
    <01-16-2015 08:55:36> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:55:36> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:55:36> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:55:36> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:55:49> DPServer.ms.com;    Unsupported distribution point operating system version for Setup;    Warning;    Configuration Manager distribution point can only be installed on systems running
    Windows Server 2003 or later.
    <01-16-2015 08:55:49> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> INFO: The rule 'Windows Failover Cluster' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:55:49> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:55:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60) for distribution point;    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and
    Configuration Manager site server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
    <01-16-2015 08:55:57> INFO: The rule 'IIS service running' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:57> DPServer.ms.com;    IIS HTTPS Configuration for distribution point;    Passed
    <01-16-2015 08:55:57> DPServer.ms.com;    Administrative rights on distribution point;    Passed
    <01-16-2015 08:55:57> ***************************************************
    <01-16-2015 08:55:57> ******* Prerequisite checking is completed. *******
    <01-16-2015 08:55:57> ***************************************************
    <01-16-2015 08:55:57> INFO: Updating Prerequisite checking result into the registry
    <01-16-2015 08:55:57> INFO: Connecting to DPServer.ms.com registry
    <01-16-2015 08:56:09> INFO: Setting registry values
    <01-16-2015 08:56:16> ERROR: Failed to update prerequisite results into the registry; error = 1.

    <01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights
    on the SQL Server and management point computers.
    Actually the administrative permission had been granted.

  • Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.

    Hi,
    Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.
    In general it is no problem to generat SSRS reports, but an custom one i get issue with.
    The Error:
    An
    error has occurred during report processing. (rsProcessingAborted)
    Query
    execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
    ExecuteReader:
    CommandText property has not been initialized

    Hi SaiTech,
    According to your description, when you render report on SCCM 2012 R2, you got the error message.
    According to my knowledge, the issue can be caused by following reasons:
    Select permission not granted to ConfigMgr reporting account. We need to open the SQL management console and open the properties dialog box of configmgr db, grant select and execute permission to ConfigMgr reporting account.
    Reporting Services Web Service URL or Report Manager is false. Make sure Web Service URL and Report Manager URL are correct. Restart SMS_Executive service and reinstall Reporting Service Point, then please render the report again.
    Report timeout. Increase query and report timeout.
    If the problem remain unresolved, please provide detailed information of SRSRP.log (default location: %programfiles%\Microsoft  and Configuration Manager\Logs) and reporting services error log(default location: %programfiles%\Microsoft SQL Server\<SQL
    Server Instance>\Reporting Services\LogFiles), it will help us move more quickly toward a solution.
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    If you have any feedback on our support, please click
    here.
    Wendy Fu
    TechNet Community Support

  • SQL standard 2012 licenses for SCCM 2012 R2

    Hi,
    We are implementing SCCM R2 for customer, is the license for SQL standard 2012 included in price for SCCM licenses, we have around 5000 mahcines to be managed also a Secondary with express edition installed .
    can secondary and primary have different version of SQL for replication ? or it should be same version?
    is there a requirement for SQL standard like processor (How many number of processer can be used if this
    license is free of cost for SCCM2012  (any limitations ) )  Is license cost calculated based on processor ?
    also how many DB can be installed with standard on single instance ? can we use it for WSUS, MDT DB?
    how will i get this SQL standard free version from Microsoft any download location.
    Please advise.
    Thanks
    Shuaib

    SQL Server Standard is included with all System Center products. As Tim said CPUs are irrelevant in this case.
    You can use whatever versions of SQL you like as long as they are supported. However isn't it always best to standardise.
    You can install as many databases as you like as long as they are System Center related - the ones you mentioned are OK.
    The customer should download SQL from their Microsoft Volume Licensing Center. If they choose the SQL that is bundled with System Center it will be pre-populated with a license key.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Hardware Sizing for SCCM 2012 R2

    Hello,
            I need your help to do Hardware Sizing for SCCM 2012 R2 environment (SCCM and SQL on same server) with 1000 clients. I have identified the Vm for this installation,
            Kindly share the RAM, HDD (Partitions for OS, Data, Log etc..) and No.of CPU
    Additionally kindly confirm SQL server 2012 SP1 requires any CU for SCCM 2012 R2 environment.

    Just an example...
    At least 16GB RAM, 2 or more CPUs.
    Basically your HDD configuration depends do you have fast disk or slow disk. HDD has to be fast, Johan has very good examples here:
    http://www.deploymentresearch.com/Research/tabid/62/EntryId/115/Sizing-your-ConfigMgr-2012-R2-Primary-Site-Server.aspx
    SQL Server 2012 SP1 doesn't require any CU for ConfigMgr 2012 R2.

  • Configuring Reporting services for SCCM 2012

    Hi,
    I just finish create SQL reporting services ( configure Database, report manager URL) in SQL 2008 R2 for SCCM 2012. When I open the Report option in SCCM console (Monitoring --> Report), no report listed there and then I try to add in Reporting service
    point for it, but get an error message
    "There is a problem connecting to the specific reporting server. Please check the connection and make sure SQL reporting service is running on the specified server"
    I manually browse to http://sqlserver/reportserver or
    http://sqlserver/reports , that is no any folder exist there (I assume when I configure reporting service it will automatic create a folder for it with all report inside?). Anyone can guide me on how to solve this issue?
    Regards,

    Hi,
    hi ,
    I am new to SCCM 2012 group and i have knowledge on sccm2007. i want to discuss some issue what i have with SCCM2012 installtion. The issue is my machine got rebooted while installing sccm 2012 SP1.i have already installed all the prerequisites for SCCM2012.i
    am installing sccm2012 on Hyper-V machine.
    Please see my system configuration below:
    DomainController(2008R2 server) : 512MB RAM, AD things and DNS ,DHCP has installed on it.
    System center server(2008R2) : 1028MB RAM , Sql 2008 server installed on it.
    i tried to install it many times but still i got the same issue.
    Could anybody please help me with this ?
    This is a new question. So please ask this question on a new thread in this forum.
    Thank you.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • New SCCM 2012 client machines still getting SCCM 2012 SP1 client not the new SCCM 2012 SP1 CU3 client

    Hi,
    I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400.  But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
    and not 5.00.7804.1400. 
    For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client? 
    Thanks,
    Nick

    Hi,
    Here's some good information to look over:
    http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
    I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
    http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
    Don't retire TechNet! -
    (Don't give up yet - 12,575+ strong and growing)

  • Using a custom certificate store for SCCM 2012 clients and primary site server

    I have read what seems to be all the pki related documentation out there for SCCM 2012. I have a PKI infrastructure up and running issueing certificates with an offline root through group policy autoenrollment. The problem that i'm faced with is we are migrating
    from SCCM 2007 that was in native mode and we chose not to use the CA that we used for the old SCCM environment. When the clients attempt to communicate with the M.P. it runs through all of the different certificates and adds a tremendous amount of overhead
    to the M.P. We will have ten's of thousands of clients by migration end. Could someone please point me to a document that goes over how to leverage a custom certificate store that I could then tell the new 2012 environment to use? I know that it's in there,
    I've seen it in the console. The setup is one primary site server with SQL on box and the pki I just mentioned as well as the old 2007 environment that is still live.
    I read that you can try and use SAN as a method of identifying the new certs but I haven't found a good document covering exactly how that works. Any info you could provide I would be very grateful for. Thanks.

    Jason, thank you for your reply. I'm getting the impression that you have never been in the situation where you had to deal with 2 different PKI environments. Let me state that I understand what your saying about trust. We have to configure the trusted root
    CA via GPO. That simply isn't enough, and I have a valid example to backup this claim. When the new clients got the advertisement and began the ccmsetup process I used the /pki switch among others. What the client end up doing was selecting a certificate that
    had the longest validity period which was issued by our old CA. It checked the authentication chain, found it to be valid and selected it for communication. At that point the installation failed, period, no caveats as you say. The reason the install failed
    because the new PKI infrastructure is integrated into the new environment, and the old is not. So when you said " that
    are trusted and they can use *any* cert that is trusted because at the end of the day, there is no
    difference between two valid certs that have the same purpose as long as they are trusted. "
    that is not correct. Both certs are trusted, and use the same certificate template, but only one certificate would allow the install to complete successfully.
    Once I started using the CCMCERTISSUERS
    switch the client install went swimmingly. The only reason I'm still debating this point is because someone might read this thread see your comments and assume "well I've got my new PKI configured as a trusted root CA, I should be all set" and their
    deployment will fail, just as my pilot did.
    About Intune I'm looking forward to doing a POC in the lab i built with my Note 3. I'm hoping it goes well as I really want to have our MDM migrated into ConfigMgr... I think the
    biggest obstacle outside of selling it to management will be the actual device migration from the current MDM solution. From what I understand of the enrollment process manual install and config is the only path forward.
    Thanks Jason for your post and discussion.

  • Database instance for SCCM 2012 and WSUS on a single primary site server

    I am going to install SCCM 2012 and its SQL database on a single physical server. This is going to be a single primary site server. The default SQL instance will be dedicated to SCCM 2012 with no other named instances to be added on the SQL server down
    the road.
    During the WSUS server role installation, there is the Database Options page asking for using (1) Windows Internal Database, (2) existing db server on this computer, or (3) an external db server.
    Since SCCM 2012 doesn't share db instance with others, how should I handle the WSUS db that's going to be hosted on the same SCCM/SQL physical server? Do I really need to create a separate SQL instance just for the WSUS db?
    Thanks and regards. 

    Even though you can do it, it is the best practice to have SCCM 2012 and WSUS installed on separate instances.
    http://technet.microsoft.com/en-us/library/hh692394
    When the Configuration Manager and WSUS databases use the same SQL Server and share the same instance of SQL Server, you cannot easily determine the resource usage between the two applications. When you use a different SQL Server instance
    for Configuration Manager and WSUS, it is easier to troubleshoot and diagnose resource usage issues that might occur for each application.

  • Unable to install Cumulative Update 2 for SCCM 2012 R2

    Hi,
    I am trying to install the CU2 update for SCCM 2012 R2 and I am getting the following error during prerequisite checks:
    Server update status: This update applies to product version 5.0.7958. The installed version on this computer is 5.0.7804.1000. This update is not applicable to this computer.
    Console update status: No serviceable configuration manager role was found on the local system.
    Can anyone provide me some guidance or thoughts on how to get to the correct version to install this update?
    Thank you

    You are running 
    ConfigMgr 2012 SP1 – 5.00.7804.1000 - build 7804
    The CU2 you are trying to apply is for SCCM 2012 R2.
    http://www.systemcenterdudes.com/sccm-2012-version-numbers/
    For SP1 the latest CU is CU5 : http://support.microsoft.com/kb/2978017/en-us
    Benoit Lecours | Blog: System Center Dudes

  • Any major changes to the database for SCCM 2012 and Reporting?

    I'm in the process of migrating my custom reports from SCCM 2007 to SCCM 2012. I wonder if all the tables / views in SCCM 2007 are the same in SCCM 2012 for my reporting purposes? So far everything I've migrated over appears to work without a problem.
    Orange County District Attorney

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    The SQL schema for SCCM 2012 has been released here.
    https://technet.microsoft.com/en-us/library/dn581978.aspx
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Pre-requisites for SCCM 2012 R2

    Hi Experts,
    I want to know is it mandatory to install and configure WDS, WSUS and MDT before deploying SCCM 2012 R2
     Are the Above roles prerequisites....????
    What would be the possible pre-requisites for SCCM 2012 R2..???

    For the pre-requisites, you can refer to the article that Torsten already shared.
    As Torsten already mentioned, the installation of WDS, WSUS and MDT is optional. However, if you are planning to do OS Deployment (OSD) then consider installing WDS and MDT (Of course, you can install MDT if you would like to take advantage of its use).
    As for WSUS, you can consider installing it if you would like to ensure a central management of Software Updates. So, depending on your requirements, you can decide what to do.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

Maybe you are looking for

  • Is it possible to embed VIMEO videos in HD QUALITY?

    Is it possible to embed VIMEO videos in HD QUALITY? I'm trying to embed in Adobe Muse a few videos taken from my Vimeo account.  but the quality in Muse seems poor, compared to the original Vimeo quality, which is HD. if I click on "HD", in Muse, it

  • Correctly Hide Edit Mode Elements in Preview Mode

    Hello, I wanted to know how I should modify the code below to correctly show content in the correct mode?  The code below works, but when switching to preview mode, I have to manually refresh the page to get the "Preview/Publish mode text" to disappe

  • Error 56 in TCP Read

    Hi, I have TCP Read in a loop  expecting data from some Micropchip boards connected to it. The problem I have is the boards do not send data all the time, hence I cannot wire in a specific constant to the number of bytes to read in, in the TCP read b

  • Retrieving admin username and password

    Hello: Can someone tell me how I can retrieve the username and password for the admin URL? The DBA is gone and he didn't document any of this info. Thanks.

  • Unable to install itunes 11 after downloading upgrade successfully.

    Internet Companions: Problem is I am able to download but unable to install itunes 11. Get feedback message that I lack necessary administrative priviledge to do so; then I am redirected to follow a confusing process and steps to obtain necessary adm