SQL 2014 CSV Disks and SCOM Technical Preview

i'm trying to install system center technical preview on SQL 2014 using CSV but the setup cannot access the cluster name\c$ which has the clusterstorage mount points for CSV
setup can detect the data and log paths "c:\clusterstorage\volume1\mssql12.mssqlserver\mssql\data\ but unable to create the database in that location
Hesham Mousa

Hi Hesham,
Since the issue is more related to SCOM, I recommend you post the question in the
System Center - Operations Manager forums. It is appropriate and more experts will assist you.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Similar Messages

SQL 2014 is Here and can be downloaded from the MSDN

SQL
2014 is Here and can be downloas from the MSDN
https://msdn.microsoft.com/en-us/subscriptions/securedownloads
* Despite the talks, I see that there are also 32-bit versions!
SQL Server 2014 Web Edition
SQL Server 2014 Standard Edition
SQL Server 2014 Express with Tools
SQL Server 2014 Express with Advanced Services
SQL Server 2014 Express
SQL Server 2014 LocaldB
SQL Server 2014 Enterprise Edition
SQL Server 2014 Enterprise Core Edition
SQL Server 2014 Developer Edition
SQL Server 2014 Business Intelligence
[Personal Site] [Blog] [Facebook]

Hi,
Yes, this link is for subscribers only. Moreover, each version of subscription has different options to download. I use the ultimate MSDN therefore I could download all. I am not sure which plain of MSDN there are now, It is changing
all the time. here are usually cheaper plain for developers teams. I recommend to check it at the time you open a subscriber. several weeks ago I opened to one of my client a great plain build for small developing teams (till 4 users if I remember correctly).
It include 4 licence from each including office (the personal subscription include 1 even with the ultimate if I got it correctly).
[Personal Site] [Blog] [Facebook]

Script to list Hyper-v CSV disks and their LUNs

Hi all
I am getting to grips with powershell now but one thing i am struggling to do is create a script that will query CSV's volumes and show their SAN volume LUNs.
Have searched frantically and pieced together something, which uses two WMI queries to gather the information and then use the signature to match them up. However, some CSVs do not come back with a signature.
Now surely to match a CSV with the corresponding physical disk and thus its LUN should be easy. Looks like lots of people have tried to crack this with WMI queries and even using diskpart. But their has to be an easy way. We are running 2012 Hyper-v
and 2012 R2 clusters. So a solution for either platform would be good.
Thanks

Hi Chris Ryan,
To get the CSV and their LUNs , you can start the
Failover Clusters Cmdlets in powershell, please check the script below:
Getting More Information About You Cluster LUN’s
Best Regards,
Anna

VGPU with Nvidia GRID and Hyper-V in a future Version of Windows Server Technical Preview possible?

Hi Windows-Server Team!
We've got 8 XenServers with NVidia GRID K2 cards in it and using it for our Citrix XenApp/XenDesktops Farms.
Works very good. But we want to do it with Hyper-V.
Is there a plan to do vGPU like XenServer with Hyper-V too?
Thanks
Thomas

Hi Thomas,
Windows Server Technical Preview adds support for OpenGL 1-4.4 and OpenCL 1.1. You will need Windows 10 Enterprise Technical Preview for the guest VM and Server Technical Preview with Hyper-V installed on the physical host.
What's New in Remote Desktop Services for the next version of Windows Server?
http://blogs.msdn.com/b/rds/archive/2014/10/07/what-s-new-in-remote-desktop-services-for-the-next-version-of-windows-server.aspx
-TP

SCCM and SCOM 2012 R2 Databases on one box

Our current situation is: About 150 Servers(VMware) and 600 windows 7 clients.
SCCM 2007 and SQL 2008 on one box, and for SCOM 2007 we have a dedicated SQL2005 VM. All of them on W2K3R2 OS.
Because of end of support for W2K3, we are not going to upgrade the servers.
New situation is SCCM and SCOM 2012 R2 with SQL 2014 on W2k12R2. I'm considering to install one SQL 2014 server only for SCOM and SCCM. Would performance be an issue??
I've read http://www.hasmug.com/wp-content/uploads/2012/10/07-201210-Oct-SQL-Server-Optimization-and-Best-Practices-for-System-Center-Administrators-Kevin-Holman.pdf
and other articles, but couldn't find info about the pro and cons having both SCOM and SCCM DB's on one SQL 2014 server
Thanx

Hi,
Please refer to the following articles:
SQL Instances and System Center 2012 (#SYSCTR #SQL #SCOM #SCCM #SCSM)
http://www.systemcentercentral.com/sql-instances-and-system-center-2012-sysctr-sql-scom-sccm-scsm/
SCOM 2012 and SQL Server Question
https://social.technet.microsoft.com/Forums/systemcenter/en-US/fabf4318-4de6-4627-9f6d-71834ac2bcab/scom-2012-and-sql-server-question?forum=operationsmanagerdeployment
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SQL 2014 Always On Availability Groups

It appears to be working. I've attached a picture of the role that was created when I was finished configuring WSFC. Is there something that would I can check that would give me a definitive answer?

I am testing SQL 2014 availability groups and I have run into a snag. I setup a win2k8 r2 DC and two windows 2012 R2 servers running SQL 2014 standard. I setup failover clustering for the two SQL servers. In SQL Management Studios I have setup the availability group and everything seems to have been successful. except when the wizard completes I get an error Creating availability group listener resulted in an error.....Error 41009.The AG seems to be working I can connect to the AG in SSMS using the listener name. But in the Availability Group Listener section there is no listener setup. Also the databases also seem to be read only if I connect thru the listener name. The AD computer account seems to be setup correctly. I am just unable to create the listener in SQL. Is there a security permission in SQL that I could have missed. Any...
This topic first appeared in the Spiceworks Community

Why there is a huge difference between a row size on a disk based table and a row size in memoptimized table of SQL 2014?

Hi All,
I have two table with similar structure and data, one is on disk and the other is in memory. I somehow calculated the difference between a row size of on disk and in memory table and found that the row size of in memory is 700 Bytes more than the disk based
tables.
aa

As others mentioned, memory optimized tables and disk based tables have different structures in SQL Server 2014.
For memory optimized tables, the number of indexes on table also contribute to the size. You can calculate the exact size of rows and thus the table size using the formula given in the below articles
Table and Row Size in Memory-Optimized Tables
Estimate the Size of a Table
Krishnakumar S

SQL 2014 cluster installation on mounting point disks error: Updating permission setting for file

Dear all,
I am attempting to install SQL 2014 fail over cluster under a physical windows 2012 R2 server which have mounting point disks.
At the finish of setup I get the following error message.
Could you please help me on this?
Thanks
The following error has occurred:
Updating permission setting for file 'E:\Sysdata!System Volume Information\.....................................' failed. The file permission setting were supposed to be set to 'D:P(A;OICI;FA;;;BA)(A;OICI;FA;;;SY)(A;OICI;FA;;;CO)(A;OICI;FA;;;S-1-5-80-3880718306-3832830129-1677859214-2598158968-1052248003)'.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: go.microsoft.com/fwlink
I am using an administrator account which have all security rights (cheched on secpol.msc mmc) needed for installation.

Hi Marco_Ben_IT,
Do not install SQL Server to the root directory of a mount point, setup fails when the root of a mounted volume is chosen for the data file directory, we must always specify
a subdirectory for all files. This has to do with how permissions are granted. If you must put files in the root of the mount point you must manually manage the ACLs/permissions. We need to create a subfolder under the root of the mount point, and install
there.
More related information:
Using Mount Points with SQL Server
http://blogs.msdn.com/b/cindygross/archive/2011/07/05/using-mount-points-with-sql-server.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SCOM Management Servers not working after DW upgraded to SQL 2014

Hey guys,
Our setup is that we have 2 Management Servers running SCOM 2012 R2 UR3 on Server 2008. I want to say exactly what our problem is, and what my guesses are at it. Any additional information you need please just ask.
Problem = In the SCOM console we have the management servers and Gateway servers going grey. If i go to these servers and restart the Monitoring service, it acts like it was locked up or something and has to force stop it and restart it. Once back up, everything
works fine. Then it goes grey again at a random interval between 5-120 minutes. Recycle Repeat. I reviewed the Event Log during this and afterwards and ALOT of stuff points toward the DataWarehouse and not being able to write stuff to it. I have two suspicions.
Idea 1 = Another Engineer recently updated SQL on the Datawarehouse server to 2014. I recently found this had caused a problem with SCSM reporting and had to do some stuff to fix that.... so I was thinking that maybe this had something to do with it.
Idea 2 = Also around the same time... UR3 came out. This was auto pushed out to all the server and agents through WSUS, I also went through and manually did all the steps for this. Its still possible i suppose that I missed something.
Basically Im just looking to see if anyone has any advice as to what to check next, and/or see if anyone else has had this problem. Thanks guys!

I unfortunately do not have a solution for you, but can still try to provide some info :
1. SQL 2014 is NOT supported with system center 2012 R2! See http://technet.microsoft.com/library/dn281933.aspx
2. You might want to try the procedure for moving the databases : http://technet.microsoft.com/en-us/library/hh278848.aspx

SCOM database compatibility with SQL 2014

Hello Experts,
We are finally upgrading from SCOM 2007 R2 to SCOM 2012 R2. Currently we have our DB's on SQL 2008 R2. I would like to know if the SCOM DB is compatibility with SQL 2014.
Thanks in Advance.
Regards,
Prajul Nambiar

Hi,
With UR5 SQL2014 is now supported
Support for SQL Server 2014 with System Center 2012 R2 Update Rollup 5
http://blogs.technet.com/b/systemcenter/archive/2015/02/23/support-for-sql-server-2014-with-system-center-2012-r2-update-rollup-5.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Restore Log with Standby Mode on VHDX disk problem - hotfix for SQL 2014 needed

Restore Log with Standby Mode on Virtual VHDX disk cause a 9004 error in SQL Server 2014 ( test performed on Web edition and Standard version )
Similar Bug for SQL 2008R2 is already registered with number hotfix
KB2987585
Restore operations always fail in Hyper-V R2 Server in situations ( text copied from
KB2987585 page )
The primary database has its transaction log file (.ldf) stored on a disk that has "Bytes per Physical Sector" set as 512 bytes.
You take the transaction log backups of this database, and then you try to restore it by using the standby option on the secondary database.
The secondary database transaction log file (.ldf) is located on a VHDX disk that has "Bytes per Physical Sector" set as 4,096 bytes.
In this scenario, the restore operation fails and returns the following error message:
Error: 9004, Severity: 16, State: 6.
An error occurred while processing the log for database '<databasename>'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
After this error occurs, the secondary database goes into a suspect state.
So restore from Generation1 to Generation2 machine ( where only VHDX disk is possible ) always fails and database is not accessible.
Please create hotfix for SQL 2014 version

Please create hotfix for SQL 2014 version
This is a community forum, no one of use can create a hotfix for SQL Server.
Raise a case at Microsoft Support or create an entry at MS Connect:
http://connect.microsoft.com/SQLServer
Olaf Helper
[ Blog] [ Xing] [ MVP]

Expand/Extend disk in SQL 2014 AAG running on VMware

I created a 2-node AAG in vSphere 5.5 running Windows Server 2012 R2 and SQL 2014 and noticed when I tried to increase the data drive (non-boot volume) the newly allocated VM disk space is reflected differently between compmgmt.msc and Server Manager>Files
and Storage Services>Volumes>Disks.
I can extend the disk using compmgmt.msc without problem but Server Manager on the other hand doesn't even recognize that there's new space available to allocate.
So my question is about whether I'm expanding disk the correct way in an AAG setup by using the tried and true Computer Management interface.

1) Using GUI :- Computer management =>
Right click disk => extend disk=>select size => finish
2) USING CMD:-
Download the DiskPart utility from the Microsoft website, then install
it on your computer.
Go to Start, Run, then type
cmd
to start a command-line session.
Type
diskpart
to start a DiskPart session.
Type
list volume
to list the current volumes. The list will look like
Volume ### Ltr Label Fs Type Size Status Info ---------- --- ------------------- ----- -------- ------- Volume 0 C NTFS Partition 10 GB Healthy System Volume 1 D Data NTFS Partition 9 GB Healthy Pagefile
Type
select volume <volume number>
to select the volume you want to extend.
Type
extend
to extend the selected volume. If you don't pass any parameters, DiskPart will use all unpartitioned space on the current disk. Alternatively, you can type
extent size=<size in MB> disk=<disk number>
to set a size and disk to use for the extension.
Type
exit
when you're finished.
check and confirm...

Windows 10 technical preview problem with lumia 730, wifi is not working and how to rollback to windows 8.1 please help

I installed windows 10 technical preview on my lumia 730 and now iam facing problem
1) unable to connect wifi
so please help me how to roll back to windows 8.1
in the forums it was written that if u have windows recovery tool then it is possible , but iam not able to find windows recovery tool.
Please help me my mail id [email protected]

so please help me how to roll back to windows 8.1
http://windows.microsoft.com/en-us/windows/preview-backup-restore

How Do I Convert Windows 10 Pro Technical Preview to Windows 10 Enterprise Technical Preview and Back Without Reinstalling Windows?

Howdy,
Much like in Windows 8 and Windows 8.1, Windows 10 provides you with experience that allows you to convert your Windows 10 Pro Technical Preview to Windows 10 Enterprise Technical Preview without having to reinstall Windows.
Why would I need converting my Windows SKU (edition)
Currently, you may need this to fix issues with Windows not synchronizing browser favorites between different editions. For example, if you're using Windows 10 Enterprise Technical Preview in a test environment at work and Windows 10 Pro Technical
Preview at home, you won't see favorites added on Enterprise edition at home and vice versa. All the links added on Pro edition while browsing web at home won't appear on your work PC.
To convert Windows 10 Pro Technical Preview to Windows 10
Enterprise Technical Preview:
1. Press WindowsKey+PauseBreak and select Add Windows Features at the bottom left corner of System window.
2. In the Add features to <OSName> window click to add Product key and type in the
public product key for Windows 10 Enterprise Technical Preview available here.
Voila! Your Windows 10 Pro Technical Preview is now converted to Windows 10 Enterprise Technical Preview.
To convert Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview:
Following the above procedure does NOT reveal Add features to Windows 10 link button in System window.
We could try doing this through DISM tool.
1. Press WindowsKey+X and select Windows PowerShell (Admin) or Command Prompt (Admin).
2. At the command prompt type dism /online /Get-CurrentEdition to obtain information about the current edition of Windows:
PS C:\Windows\system32> dism /online /Get-CurrentEdition
Deployment Image Servicing and Management tool
Version: 10.0.9926.0
Image Version: 10.0.9926.0
Current edition is:
Current Edition : Enterprise
The operation completed successfully.
PS C:\Windows\system32>
3. Check which versions you may switch to:
PS C:\Windows\system32> dism /online /Get-TargetEditions
Deployment Image Servicing and Management tool
Version: 10.0.9926.0
Image Version: 10.0.9926.0
Editions that can be upgraded to:
(The current edition cannot be upgraded to any target editions.)
The operation completed successfully.
Looks like Windows 10 Enterprise Technical Preview cannot be downgraded.
To downgrade edition from Enterprise to Pro, you can trick Windows setup into thinking it is running on Pro by going to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion and changing the following keys:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Enterprise"
"ProductName"="Windows 10 Enterprise Technical Preview"
I believe for Pro edition this must be
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Professional"
"ProductName"="Windows 10 Pro Technical Preview"
After that you may run in-place upgrade using Windows 10 Pro Technical Preview Setup disc.
Note, if you can't find the Add features to option in Control panel, press Windows Key + R and type control /name Microsoft.WindowsAnytimeUpgrade.
If you want to, you could change Windows edition via DISM servicing tool by running:
DISM /online /Set-Edition:Enterprise /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX /AcceptEula
In case you can't access official page for
Windows 10 Enterprise Technical Preview download, or the page that contains
product key for Windows 10 Pro Technical Preview, you can always obtain the product key by looking for
F:\sources\pid.txt on the Windows Setup disc.
Well this is the world we live in And these are the hands we're given...

Howdy,
Much like in Windows 8 and Windows 8.1, Windows 10 provides you with experience that allows you to convert your Windows 10 Pro Technical Preview to Windows 10 Enterprise Technical Preview without having to reinstall Windows.
Why would I need converting my Windows SKU (edition)
Currently, you may need this to fix issues with Windows not synchronizing browser favorites between different editions. For example, if you're using Windows 10 Enterprise Technical Preview in a test environment at work and Windows 10 Pro Technical
Preview at home, you won't see favorites added on Enterprise edition at home and vice versa. All the links added on Pro edition while browsing web at home won't appear on your work PC.
To convert Windows 10 Pro Technical Preview to Windows 10
Enterprise Technical Preview:
1. Press WindowsKey+PauseBreak and select Add Windows Features at the bottom left corner of System window.
2. In the Add features to <OSName> window click to add Product key and type in the
public product key for Windows 10 Enterprise Technical Preview available here.
Voila! Your Windows 10 Pro Technical Preview is now converted to Windows 10 Enterprise Technical Preview.
To convert Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview:
Following the above procedure does NOT reveal Add features to Windows 10 link button in System window.
We could try doing this through DISM tool.
1. Press WindowsKey+X and select Windows PowerShell (Admin) or Command Prompt (Admin).
2. At the command prompt type dism /online /Get-CurrentEdition to obtain information about the current edition of Windows:
PS C:\Windows\system32> dism /online /Get-CurrentEdition
Deployment Image Servicing and Management tool
Version: 10.0.9926.0
Image Version: 10.0.9926.0
Current edition is:
Current Edition : Enterprise
The operation completed successfully.
PS C:\Windows\system32>
3. Check which versions you may switch to:
PS C:\Windows\system32> dism /online /Get-TargetEditions
Deployment Image Servicing and Management tool
Version: 10.0.9926.0
Image Version: 10.0.9926.0
Editions that can be upgraded to:
(The current edition cannot be upgraded to any target editions.)
The operation completed successfully.
Looks like Windows 10 Enterprise Technical Preview cannot be downgraded.
To downgrade edition from Enterprise to Pro, you can trick Windows setup into thinking it is running on Pro by going to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion and changing the following keys:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Enterprise"
"ProductName"="Windows 10 Enterprise Technical Preview"
I believe for Pro edition this must be
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Professional"
"ProductName"="Windows 10 Pro Technical Preview"
After that you may run in-place upgrade using Windows 10 Pro Technical Preview Setup disc.
Note, if you can't find the Add features to option in Control panel, press Windows Key + R and type control /name Microsoft.WindowsAnytimeUpgrade.
If you want to, you could change Windows edition via DISM servicing tool by running:
DISM /online /Set-Edition:Enterprise /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX /AcceptEula
In case you can't access official page for
Windows 10 Enterprise Technical Preview download, or the page that contains
product key for Windows 10 Pro Technical Preview, you can always obtain the product key by looking for
F:\sources\pid.txt on the Windows Setup disc.
Well this is the world we live in And these are the hands we're given...

Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried

Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried the whole site again, and then tried publishing as a new site altogether. Thought I would then try to export as HTML in the hope of uploading the files via an FTP client and Muse crashes and locks up again. I am extremely stressed about this as I am in the last few days of of website I have been working on now with no issues since December. We are due to go live and my client needs to see it. I am desperate for an answer. It is not looking good. I am on an Apple Mac and have not had any isses publishing it for the last 6 months. Not very happy to say the least. Need desperate help.

Hi Zak, I got onto Adobe Customer Care Live Chat this morning and gave them the error message. After some trouble shooting with them it appears the older archived file of the site still publishes. I have now reverted back to the old file and copied and pasted out of the new file and from some ideas given to me by support I am now able to publish to Business Catalyst. It seems there was something corrupt within the new pages added yesterday. I have no idea if this would have still happened if I hadn't updated but I am glad it wasn't a Muse specific problem. I am loving using Muse and the support from Adobe has been excellent. Thanks everyone. By the way I do love the new version and apart from this hick up that lost me a few hours, aged me some more and gave me grey hair I really love Muse. Thanks again.

SQL 2014 CSV Disks and SCOM Technical Preview

Similar Messages

Maybe you are looking for