SQL Agent Job Fails To Run A SSIS Package

Hi,
I have a SSIS Package which basically truncates the table and re-loads it from an excel file .The job runs fine if i run it manually on visual studio.However, i try to shcedule a SQL Agent job and it fails with the following error
Description: The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000. An OLE DB record is available. Source: "Microsoft
OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2014-10-22 14:47:41.15 Code: 0xC001002B Source: Package1 Connection manager "Excel
Connection Manager 1" Description: The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.
I am exactly not sure what it means?
Can someone please help me with any suggestions on this.
Thanks.

Thanks for trying that option . It looks like there is an issue with the driver . Can you try to install/uninstall the driver once again from http://www.microsoft.com/en-us/download/details.aspx?id=13255.
You can try this URL , where he has the similar problem
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8a40d329-0611-44e2-ae51-3bd9b0901754/ssis-the-requested-ole-db-provider-microsoftaceoledb120-is-not-registered?forum=sqlintegrationservices
Please mark this as answer if this helps to solve your problem

Similar Messages

SQL Agent Job failing - not using credentials in the config file for Data source

Hi
We have an SSIS pkg, that is secheduled as SQL Agent job using proxy account. The pkg contanins data source for connecting different SQL servers and the proxy account do not have access to the external DBs. The data source credentials are stored in the Config
file.
Why the job is not using the credentials in the config file and try to use the proxy account and failing.
Do the proxy account need access to all the external dbs in the pkg, and then what is the purpose of the config file.
I am sorry, i am not SSIS person trying to understand. If any one can explain tha will be great!!
Thank you!
VR

Please take a look at these URLs:
Schedule a Package by using SQL Server Agent
SSIS package does not run when called from a SQL Server Agent job step
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email]

SQL Server Job that were written in SSIS packages failed

could not load package files system because of error 0x80070002. Description: could not find file 'C:\program files\microsoft SQL Server\100\DTS\Binn\. The package could not be loaded. The step failed. I found this error on one of my job configured in
ssis packages which take a view statement from my production server, which actually is in a cluster environment. Thank you guys

It's a little difficult to infer what could be happening without having an idea about what the package does. If you can share one or two screenshots of it, it would be great. You will need Business Intelligence Development Studio (BIDS) for SQL 2008 or previous,
or SQL Data Tools if SQL 2012. Right click over the package in the file system and select "Edit".
In the meanwhile, let me give some ideas for troubleshooting:
If your servers are 64bits, be sure your SQL Agent Job step for the SSIS package is running also in 64bits.
Assuming your package basically takes data from the view and move it to other server, main of the workload should be at read time from the view. Try running the SQL statement that package is issuing and take the time. If the time is still less than
3 minutes, your package should have more logic/transformations doing other tasks that we will need to look in. If time is much more, maybe you have much more data in the view underlying tables.
If querying from the view is still so fast, we will need to understand what the package is doing after the initial read.
HTH
Please, mark this post as Answer if this helps you to solve your question/problem.
Alan Koo | "Microsoft Business Intelligence and more..."
http://www.alankoo.com

Automated SQL Agent jobs do not run

Hi all
I am having serious issues in running SSIS packages automatically.
Furthermore, when I assign a job to run the SSIS package manually (SSMS -> Start Job at Step....), it runs through the job very quickly and displays "success", when in actual fact, it hasn't done anything.
I have tested my package in BIDS and all works fine.
Can anyone give me a clue as to what may be going wrong please?
Many thanks in advance.

Hi divvyboy,
Based on your description, the issue may be caused by one of the following factors:
Data source connection issue. This can occur because the SQL Server Agent Service Account or the proxy account lacks permissions to access the data source.
Package Protection Level issue.
For the solution in each scenario, please refer to the following link:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/e13c137c-1535-4475-8c2f-c7e6e7d125fc/how-do-i-troubleshoot-ssis-packages-failed-execution-in-a-sql-agent-job?forum=sqlintegrationservices.
If the issue persists, please post the error details from the SQL Server Agent job history.
Regards,
Mike Yin
TechNet Community Support

SQL Agent Job fails due to excel import

I have SQL SERVER 2012 SP 1. I have a package which imports a generic spreadsheet into a import table and then does does other stuff with it.
I can happly run the SSIS package through BIDS but fails when I try and run it though SQL agent.
with errors such as Microsoft.ACE.OLEDB.12.0. Provider is not registered on this machine.
Within the SSIS I use the Excel connection manager and have modifed the string to
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=D:\FileDropTest\Fusion.xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES;IMEX=1";
and re deployed and still get the same issue.
I then enabled xp_cmdshell and tried from TSQL
DECLARE @Qry VARCHAR(8000)
SELECT @Qry = 'dtexec /FILE "D:\SSIS\export\Fusion.dtsx"'
EXECUTE xp_cmdshell @Qry
and got
output
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.5058.0 for 64-bit
Copyright (C) Microsoft Corporation. All rights reserved.
NULL
Started: 5:49:25 PM
Error: 2015-02-09 17:49:25.43
   Code: 0xC001000E
   Source: Fusion
   Description: The connection "{3076028A-D7D9-4432-AADB-CAC6D9AD5995}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
As a different approach it was recommended to use OLEDB however within BIDS I the connection tests fine but when I run it though BIDS it fails
[OLE DB Source [79]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "D:\FileDropTest\Fusion.xlsx" failed with error code 0xC0202009. There may be
error messages posted before this with more information on why the AcquireConnection method call failed.
For refrence I ve also set the delay to true.
I'm a bit stuck as I thought importing a spreadsheet being Microsoft product ;) would be fairly easy . Any Help on this matter would be great.

If your source Excel file is .xls, it should successfully import it. However in your case Excel file is .xlsx hence it fails.
>> I can happly run the SSIS package through BIDS but fails when I try and run it though SQL agent.
with errors such as Microsoft.ACE.OLEDB.12.0. Provider is not registered on this machine
Your local server where you run the package in BIDS have the 32 Bit ACE OLEDB 12.0 driver installed correctly.
But the target server where you run the package thorugh SQL Agent has no correct driver. Please download
32 bit Microsoft Access Database Engine 2010 Redistributable and install it in Target server.
>> I then enabled xp_cmdshell and tried from TSQL and got errors "Connections collection when the specific connection element is not found"
Please look at the connection managers in your package. There has to be some connection manager where name is missing. This may happen if you copy paste connection from same or another ssis package.
-Vaibhav Chaudhari

[SQLSTATE 42000][Error 4834] - SQL Agent Job failing

Hello,
I have started getting the below error message on a bulk insert job that has been running over several months.
Error is:
Executed as user: domain\svc_sql. You do not have permission to use the bulk load statement. [SQLSTATE 42000] (Error 4834). The step failed.
Domain\svc_sql is also service account for SQL Server. Both the SQL server and SQL agent are running under this account and it has sysadmin and bulkadmin privileges.
Bulk insert is from csv file in a folder for which domain\svc_sql has full permission.
I've now ran out of ideas.
Could anybody advise?
Many thanks,
Mohan

Hi Mohan,
According to the error message, it can be caused by that when SQL Server Agent performs EXECUTE AS USER, you are by default sandboxed into the database, and therefore you don't have access to server-level tasks.
To work around the issue, as Praveen’s post, you can set the database TRUSTWORTHY to ON, however it might cause some security issues. For more details, please review this article:
Giving Permissions through Stored Procedures Ownership Chaining, Certificates and the Problematic EXECUTE AS.
Personally, I recommend you create the bulk insert job as a CmdExec job which uses SQLCMD to run scripts. For more information about CmdExec job, please review this article:
Create a CmdExec Job Step.
There is also a discussion about the error 4834 in the following thread.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/48621876-11a0-468c-95b4-2a682f0134aa/bulk-insert-not-working-through-an-agent-job
Thanks,
Lydia Zhang

Sql Agent Job Failed after changing job name to sa Error(The job owner does not have access )

I changed job owner to sa and it worked well, But now it fails saying job owner does not have sever access and shows job owner as previous owner Name even after it changed to sa?
Help......

EXEC msdb.dbo.sp_update_job @job_id=N'7d4d4040-b79c-4022-9d19-e449497ab60e',
@owner_login_name=N'sa'
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How do I automatically backup SQL Agent jobs and SSIS packages on the mirror daily?

I have seen this question asked before but I could not find a satisfactory answer. What is the best solution to get your SQL Agent jobs/schedules/etc. and your SSIS packages on the mirror server? Here's the details:
Server A is the principal with 2 DBs mirrored over to server B. Everything is fine and dandy, DBs are synched and all good. In Disaster Recovery testing, we need to bring up server B, which now will serve as the principal. Server A is inaccessible. Now,
we need all our jobs that are setup in server A to be in server B, ready to go, but disabled. We also need all our SSIS packages properly stored. Yes, we store our packages in the MSDB in server A.
Now, I can see a few answers coming my way.
1- Backup the MSDB to server B. When you bring server B up as principal in DR, restore the MSDB. All your jobs,schedules,steps, SSIS packages will be there. Is this possible? Can this be done on server B without rendering it incapable of serving as the principal
for the mirrored DBs? My fear with this option is that there may be information in the MSDB itself about the mirroring state of the DBs? Or is all that in the Master DB? Have you tried this?
2- Right click each job, script them out, re-create them on server B... No, thank you very much. :) I am looking for an AUTOMATED, DAILY backup of the jobs and SSIS packages. Not a manual process. Yes, we do change jobs and packages quite often and doing
the job twice on two servers is not an option.
3- Use PowerShell.. Really? Are we going back to scripting at the command prompt like that, that fast?
Since I fear option number 3 will be the only way to go, any hints on scripts you guys have used that you like that does what I need to do?
Any other options?
Any help GREATLY appreciated. :-) I can be sarcastic but I am a good guy..
Raphael
rferreira

I would go with option number 3. Once you have a script simple run it....
param([string]$serverName,[string]$outputPath)
function script-SQLJobs([string]$server,[string]$outputfile)
[reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.Smo") | Out-Null
$srv = New-Object Microsoft.SqlServer.Management.Smo.Server("$server")
$db = New-Object Microsoft.SqlServer.Management.Smo.Database
$scrp = New-Object Microsoft.SqlServer.Management.Smo.Scripter($srv)
$scrp.Options.ScriptDrops = $FALSE
$scrp.Options.WithDependencies = $TRUE
$jobs = $srv.JobServer.get_Jobs()
$jobs=$jobs | Where-Object {$_.Name -notlike "sys*"}
foreach($job in $jobs)
$script=$job.Script()
$script >> $outputfile
"GO" >> $outputfile
---script-SQLJobs "SQLSRV12" "C:\Jobs\test.txt"
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Blog:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance

Run SQL Agent Job in endless loop(When it's done, start over again)

Hi All,
There is an SQL Agent Job containing a complex Integration Services Package performing some ETL Jobs. It takes between 1 and 4 hours to run, depending on our data sources. The Job currently runs daily, without problems. What I would like to do now is to
let it run in an endless loop, which means: When it's done, start over again.
The scheduler doesn't seem to provide this option. I found that it would be possible to use the steps interface to go to step one after the last step is finished, but there's a problem using that method: If I need to stop the job, I would need to do that in
a forceful way. However I would like to be able to let the job stop after the next iteration. How can I do that?
Thanks in Advance...

Seriously I cant think of a reason for continuosly running a step like this
Do you mean you need to keep on polling db for something continuosly ?
If thats the requirement there's no need of continuosly calling the step
Instead of that you can include a loop with wait logic to keep on checking for your condition until it satisfies. You can WAITFOR clause for that
see an example here where I've implemented similar logic in SSIS
http://visakhm.blogspot.in/2011/12/simulating-file-watcher-task-in-ssis.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

LcsCDR & QoEMetrics Purge and Usage Summary SQL Agent Jobs

Hello.
On our SQL instance that hosts the LcsCDR & QoEMetrics databases I have the following SQL Server Agent Jobs:
LcsCDR_Purge
LcsCDR_UsageSummary
QoEMetrics_Purge
QoEMetrics_UsageSummary
I'd like to know if anyone else has these same jobs on their instances as it's unclear looking at the job descriptions, when they were created, and the code they run if these are part of the core Lync system or something that has been set up randomly
afterwards.
One thing I do know is that these jobs don't work correctly when you use database mirroring. I will elaborate on this if/when I can find out any more information about them first.
Thanks

Thank you for the reply.
The problem with these jobs is that when they attempt to run against a database which is a mirror, it causes the job to fail. That would not seem to be a big deal right, except our policy (and many other SQL shops I imagine) is to send e-mail notifications
each and every time a SQL agent job fails on any server, not just those associated with Lync.
As it stands these jobs are not configured on either the principal or mirror server to notify anyone as I’d get an e-mail every hour on the hour from the mirror server telling me that a job has failed (even though it didn’t actually need to do anything
) giving the impression something is wrong somewhere. This is quite a common trap to fall into with SQL Agent jobs and database mirroring.
Remember that because as Lync uses automatic failover either server could be the mirror at any given time so there is no mileage in setting the e-mail notifications on just the server that is currently the principal.
What this job should do then is when it attempts to run on the mirror, check if it’s the mirror first and if it is then do nothing instead of failing each time. This will enable e-mail notifications to be set up on the jobs on both servers, so when
the job fails we know there is potentially a genuine problem to be investigated.
Each job contains two steps, I’ll use the QoEMetrics_UsageSummary as the example.
The code in step 1 is this, which causes the job to error out if it is attempting to run against the mirror.
declare @_MirroringRole int
set @_MirroringRole = (
select mirroring_role
from sys.database_mirroring
where database_id = DB_ID('QoEMetrics')
if (@_MirroringRole is not NULL and @_MirroringRole = 2) begin
raiserror('Database is mirrored', 16, 1)
end
else begin
print ('Database is not mirrored')
end
I re-wrote this job to run in one-step like this, which runs from the master database, which as I mentioned above doesn’t make the job error out when it realises it’s trying to run against a mirror.
DECLARE @_MirroringRole INT
SET @_MirroringRole = ( SELECT mirroring_role
FROM sys.database_mirroring
WHERE database_id = DB_ID('QoEMetrics'))
-- if this is not a mirrored database or it's the principal, attempt to run usage summary op
IF (@_MirroringRole IS NULL OR @_MirroringRole = 1)
BEGIN
DECLARE @_Sql NVARCHAR(4000)
SET @_Sql =
'USE [QoEMetrics];
DECLARE @_UpdatingSkipped INT
EXEC dbo.RtcRegularMaintainDatabase @_UpdatingSkipped = @_UpdatingSkipped output'
EXEC (@_Sql)
END
ELSE -- if the database is a mirror, don't do anything
BEGIN
PRINT 'there is nothing to do, the database is a mirror'
END
The same logic can be applied to the other 3 jobs and I was intending to suggest it as a connect item, except there doesn’t seem to be a section for Lync so I will contact product support and see what they think.
Thanks again.

Notify more than 1 operator in a SQL Agent job

Hi Forum,
is there a way to notify more than one operator if a SQL Agent job fails?
TIA
Alex

Hello Alex,
If you are using a "maintenance plan" task "Notify operator" you can select several operators from a list.
In a SQL Server Agent job itself you can only add several operator for "warnings", but for the notifications like "finished" just one.
Olaf Helper ----------- * cogito ergo sum * errare humanum est * quote erat demonstrandum * Wenn ich denke, ist das ein Fehler und das beweise ich täglich http://olafhelper.over-blog.de

Sql server agent job failing to connect excel connection manager of SSIS package by 32-bit mode run time

I am unable to succeed with sql agent job, I am trying to execute the SSIS package through sql agent job by ticking 32 bit runtime check box in 64 bit machine , even it does not worked..
could any one helpme on this?
Source: Excel Load Connection manager "Excel Connection Manager"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class
not registered". End Error TS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error
messages posted before this with more information on why the AcquireConnection method call failed. End... The package execution fa... The step failed.

Hello Keerthi,
Can you please modify settings and set delay validation for Excel connection manager? I think its validating connection and failing because it might be picking that from some variable.
Alternatively, please run package using below and see what happens.
EXEC master..xp_cmdshell 'DTEXEC.exe /SQL "Folder\Package" /SERVER Servername'
I will recommend you to follow steps in below link.
http://www.sqlhammer.com/blog/running-ssis-packages-in-32-bit/
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

SSIS Package will only run as SQL Agent Job when I have remote desktop to server open.

Hey guys, so I have another problem to add to the already massive 'SSIS/SQL Server Agent Job' pile. After days of searching, I can't seem to find anything specific to my problem though.
The setup is as follows: a SSIS package that refreshes and saves excel files that are hosted on a server. The package runs fine on the local machine, using BIDS on the server, and will even work as a SQL Agent Job on the server IF there is a remote
desktop connection to the server. To elaborate, if I simply run the job as you would normally do it will fail and give the below error. If I run the job while either myself, or a different machine, has a remote desktop connection to the server where the
job is scheduled - it will run successfully.
Below is the error from the History File of the job. Any help would be greatly appreciated.
Source: Refresh Excel and Save      Description: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x8000401A): Retrieving
the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 8000401a.     at ST_79772452677f4de1852d5ffbba3e5232.csproj.ScriptMain.ExcelRefresh(String FileName)
at ST_79772452677f4de1852d5ffbba3e5232.csproj.ScriptMain.Main()     --- End of inner exception stack trace ---     at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct&
sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)     at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)     at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags
invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)     at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo
culture, String[] namedParams)     at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)     at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
UPDATE:
In my previous post the Identity in DCOM Config file for Microsoft Excel was set as The Interactive User. The job was working only when I had a remote connection to the server open.
If I set the Identity to 'This User' and use the username and password of the server login account, it will work as a scheduled job without needing an open remote connection to the server. So it works, great! but I have reservations setting this
for all instances of Excel for the server. I'm sure other users have different accounts they use for running Excel. Any suggestions around this?

Hi LiamSexton,
It should be the server-side Automation of Office issue described in the following KB article:
http://support.microsoft.com/kb/257757
Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office may exhibit
unstable behavior and/or deadlock when Office is run in this environment.
User Identity: Office applications assume a user identity when the applications are run, even when Automation starts the applications. The applications try to initialize toolbars, menus, options, printers, and some add-ins based on settings in the user
registry hive for the user who launches the application. Many services run under accounts that have no user profiles (such as the SYSTEM account or the IWAM_[servername] accounts). Therefore, Office may not initialize correctly on startup. In this situation,
Office returns an error on the CreateObject function or the CoCreateInstance function. Even if the Office application can be started, other functions may not work correctly if no user profile exists.
To work around the issue, you can refer to the following alternative introduced in the article:
Most server-side Automation tasks involve document creation or editing. Office 2007 supports new Open XML file formats that let developers create, edit, read, and transform file content on the server side. These file formats use the System.IO.Package.IO
namespace in the Microsoft .NET 3.x Framework to edit Office files without using the Office client applications themselves. This is the recommended and supported method for handling changes to Office files from a service.
Regards,
Mike Yin
TechNet Community Support

Errors running SQL Agent Jobs for 64 bit SSIS packages on a 64 bit server, but Source server 32 bit

Hi,
I can able ran the SSIS package in BIDS, since set to false in Run64BitRuntime property.
Then I created SQL server Agent job I tried the following ways
Step 1:
Type is set as SQL Server Integration Services Packages,
Run as - SQL Server Agent Service Account
Package source - FileSystem
then Execution option tab I selected 32 bit runtime
and then run the job I am getting the below error
Message
Executed as user: CIT\svc_CS_SS2008Agent. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 7:29:17 AM Error: 2013-11-28
07:29:18.57     Code: 0xC0014020     Source: Example Connection manager "DataSource.DataExtract"     Description: An ODBC error -1 has occurred. End Error Error: 2013-11-28 07:29:18.57
Code: 0xC0014009     Source: Imports20_OAC_Gifts Connection manager "DataSource.DataExtract"     Description: There was an error trying to establish an Open Database Connectivity (ODBC) connection with the
database server. End Error Error: 2013-11-28 07:29:18.59     Code: 0x0000020F     Source: DFT_Example ODBC_SRC Example [11]     Description: The AcquireConnection method call to the connection
manager DataSource.DataExtract failed with error code 0xC0014009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2013-11-28 07:29:18.59
Code: 0xC0047017     Source: DFT_Example SSIS.Pipeline     Description: ODBC_SRC Example failed validation and returned error code 0x80004005. End Error Error: 2013-11-2
Step 2:
Type - Operating sytem (CmdExec)
Run as - Sql Server agent service account
Command - C:\Program Files\Microsoft SQL Server\110\DTS\Binn\dtexec.exe /FILE "D:\Example\Example.dtsx" /x86 /CHECKPOINTING OFF /REPORTING E
then run the job I am getting the below error
Message
Executed as user: MIS\svc_CS_SS2008Agent. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 6:37:58 AM Error: 2013-11-28
06:37:58.94     Code: 0xC0014020     Source: Example Connection manager "DataSource.DataExtract"     Description: An ODBC error -1 has occurred. End Error Error: 2013-11-28 06:37:58.96
Code: 0xC0014009     Source: Example Connection manager "DataSource.DataExtract"     Description: There was an error trying to establish an Open Database Connectivity (ODBC) connection with the database server.
End Error Error: 2013-11-28 06:37:59.01     Code: 0x0000020F     Source: DFT_Example ODBC_SRC Example [11]     Description: The AcquireConnection method call to the connection manager DataSource.DataExtract
failed with error code 0xC0014009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2013-11-28 06:37:59.07     Code: 0xC0047017
Source: DFT_Example SSIS.Pipeline     Description: ODBC_SRC Example failed validation and returned error code 0x80004005. End Error Error: 2013-11-28 06:37:59.12     Code: 0xC004700C
Source: DFT_Example SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2013-11-28 06:37:59.16     Code: 0xC0024107     Source: DFT_Example
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1).Started: 6:37:58 AM Finished: 6:37:59 AM Elapsed: 1.373 seconds. Process Exit Code 1.
The step failed.
Note:
My source server is 32 bit and development environment in 64 bit
if anybody have idea please share your knowledge

Hi BIRam,
Based on the current information, the issue may be caused by the factor that the SQL Server Agent Service Account doesn’t have access to the MySQL server. Try to create a SQL Server Agent Proxy account that has sufficient permission on the MySQL server.
In addition, also pay attention to the package protection level setting.
For more information, please see:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/e13c137c-1535-4475-8c2f-c7e6e7d125fc/how-do-i-troubleshoot-ssis-packages-failed-execution-in-a-sql-agent-job?forum=sqlintegrationservices.
Regards,
Mike Yin
TechNet Community Support

Error with SSIS package running as SQL Agent job

I have a strange issue.
I have a SQL Agent job that execute 5 steps, each step is an SSIS package that imports a CSV file to a temp table, then executes a SQL script to update a production table.
This job runs every 3 mins, every day, and has been for over a year.
Every once in a while it will start failing on step 2. Sometime it only happens for a couple of runs, other times I have to restart the SQL server. Once it corrects itself, it could be months before it happens again, but usually happens every
few weeks.
The error in the job history is: "Unable to bulk copy data. You may need to run this package as an administrator"
Obviously I have all the permissions correct, as it was running successfully every 3 mins before this error suddenly starts. I'm at a loss as to what the problem is. It is always on step 2, which is identical to step 1 except its a different CSV file
going to a different table. As I typed this, it failed twice, then was successful afterwards.
Any ideas where to look for further information? I've checked the event viewer and looked in the SQL logs, nothing stands out at this time.

Hi Kerberos35,
It seems to be caused by the UAC feature which makes SSIS use the low-permissions token of the administrator Windows account under which the job runs. This issue is described in the following KB article:
http://support.microsoft.com/kb/2216489/en-us
To resolve the issue, you can install the latest service pack for your SQL Server. To work around this issue, you can also use one of the following two methods:
Method 1: Replace the SQL Server Destination components in the Data Flow Tasks that are failing with OLE DB Destination components that point to the same SQL Server connection manager.
Method 2: Create a SQL Server Agent proxy by using a Windows account that is not a member of the local Administrators group after you assign Create Global Objects permissions to that account.
To do this, follow these steps:
Click Start, point to Administrative Tools, and then click Local Security Policy.
Expand Local Policies, and then click User Rights Assignment.
In the details pane, double-click Create global objects.
In the Local Security Policy Setting dialog box, click Add.
In the Select Users or Group dialog box, click the user accounts that you want to add, click Add, and then click OK two times.
Regards,
Mike Yin
TechNet Community Support

SQL Agent Job Fails To Run A SSIS Package

Similar Messages

Maybe you are looking for