SQL Developer Edition.

Hi,
I was wondering if anyone could tell me whether it's possible to install SAP onto Microsoft's SQL Developer Edition in Pre-Production platforms. Microsoft state publicly that Developer Edition has all the functionalilty of Enterprise and is essentially a rebadged Enterprise Edition with a development-centric Licensing model.
Furthermore, I understand that Microsoft's licensing documents cite a three tiered environment approach - Dev, Test and Prod - using Enterprise in production and Developer Edition in Dev and Test, as per pretty much any other SQL based environment.
I understand that the SAP system installation can be carried out manually (as opposed to the VBS scripted method), allowing the use of non-SAP provided media for the SQL installation but I'm unsure as to whether it will accept the Developer Edition installation at this point.
Thanks
W

Hi,
SQL Server 2000 and SQL Server 2005 are only tested in the Enterprise Edition by SAP. Therefore, only the Enterprise Edition is supported. The SAP support may not be able to solve problems that occur with other editions
if you want to try to use Developer Edition you need to install it manually check the installation document to install SQL server manually but do it as your own risk as SAP support is concern
regards,
kaushal

Similar Messages

MS SQL Developer Edition

Hi there,
Can I use MS. SQL Developer Edition for SAP Web Application Server Java 6.4 SP3 ? I've a problem during installation of SAP WAS 6.4 SP3 that came up with Enterprise Portal on MS SQL-Developer Edition-Sneak Preview Package.
Thanks in advance for any info.
Cheers,
Danny

Hello Danny,
have a look at this thread: Re: Inst. EP6.0 SP2 with MSDE 2000. It helped me installing the MSDE correct. Have you tried the SDN Forums search engine?
Regards
Gregor

NW04s on Win XP and SQL Developer Edition

Hello all
I'm trying to install NW 7.0 (04s) on Windows XP SP 2 and SQL Developer Version.
I checked the PAM and it is listed only Win Server and SQL Server Enterprise Edition.
I'm having the following error during phase 24 of 43 installation. (Start Instance)
- starting epb/dvebmgs00 ABAP unknown elapsed time 5:30 minutes....
and keeps trying to do this for 10 minutes until:
- ABAP processes of instance epb/dvebmgs00 [abap:unknown] did not start after 10:00 minutes. Giving up.
The error say something like this :
ERROR 2007-06-08 16:48:47
CJS-30149 ABAP processes of instance EPB/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:00 minutes. Giving up.
ERROR 2007-06-08 16:48:47
FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR .
I also have some warnings that may represent something:
INFO 2007-06-08 16:35:17
Execute step createOsCol of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|0|0.
WARNING[E] 2007-06-08 16:35:18
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (266), with parameter (SAPOsCol).
INFO 2007-06-08 16:38:11
Execute step createCCMSService of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0.
WARNING[E] 2007-06-08 16:38:11
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (266), with parameter (sapccmsr.00).
My start EPB.log file looks like this:
running C:\usr\sap\EPB\SYS\exe\uc\NTI386\sapstart.exe name=EPB nr=00 SAPDIAHOST=PALN00433168A -wait
SAPSTART finished successfully on PALN00433168A_EPB_00, but at least one process doesn't run correctly:
C:\usr\sap\EPB\SYS\exe\uc\NTI386\sapstart.exe=>sapparam(1c): No Profile used.
Any ideas as where the error should be?
Thanks
AR

it is not possible to install NW on WIN XP

Installing SQL Server 2012 Developer Edition or wait for SP2?

Hi everyone,
I just received my copy of SQL Server 2012 Developer Edition I ordered. As usual, before installing, I searched the web for any hint or other stuff on the subject.
I first found that SP1 was already available. Honestly I prefer installing using the last version available instead of upgrading. I found the SP1 install package using the following web address:
http://www.microsoft.com/fr-ca/download/details.aspx?id=35575
Is this the right install package to use?
Now, still reading everything I could find on that SP1, I found stories about major issues with SP1.
Two examples I remember:
http://connect.microsoft.com/SQLServer/feedback/details/770630
http://support.microsoft.com/kb/2793634/en-us?wa=wsignin1.0
Two others (not specifically related to SP1):
http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/a0da3372-ab3d-4af0-b4c4-0d47163e0e03/
http://www.sqlperformance.com/2012/11/system-configuration/2012-cal-problems
My question. Should I wait for SP2? If so, any target date when it should be available?
If not, what would you recommend as the logic install sequence? Should I look for any cumulative update(s)? Any other "manual settings" I should consider?
Finally, can someone guide me regarding what options I should choose while installing. My main goal is to program/build C++, C# applications using VS2010 that will interface with SQL Server for data storage purposes (add/update/delete,
batch update/delete) and reports.
Hope to hear from someone.
Stephane
BTW: My current setup is the following:
Intel(R) Core(TM)2 CPU [email protected]
3.00 Go
Vista Ultimate SP2 32bits
Visual Studio 2010 Professional Edition (which will be upgraded to last SP once installed)

Hi again,
I proceeded with download of CU7. On Microsoft's webpage, there are several files we can download:
2012_SP1_DAC_CU7_2894115_11_0_3393_x86
2012_SP1_AOrcleDes_CU7_2894115_11_0_3393_x86
2012_SP1_AOrcleSer_CU7_2894115_11_0_3393_x86
2012_SP1_PPExcel_CU7_2894115_11_0_3393_x86
SQLServer2012_SP1_CU7_2894115_11_0_3393_x86
Which one I should choose?
Also, some people reported having problems installing this update.
http://blogs.msdn.com/b/sqlreleaseservices/archive/2013/11/19/cumulative-update-7-for-sql-server-2012-sp1.aspx
Can you comment?
Thanks again for helping,
Stéphane

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

Hello,
I am glad it worked.
Thank you for visiting MSDN forums!
Regards,
Alberto Morillo
SQLCoffee.com

Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

Hi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Unable to use PL/SQL Developer on Oracle 10g express edition

Hello,
i have installed oracle 10g XE and PL/SQL developer 8.
The contents of .ora files are as follows
tnsnames.ora file:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pravindasari)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = pravindasari)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
sqlnet.ora
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
i am able to login thru database home page.
When connecting to oracle through PL/SQL developer, m using the following details
username: system
pwd: system
database: XE
connect as: Normal
But i get the error as follows:
ORA-12154: TNS: could not resolve the connect identifier specified
Its working completely fine on my desktop which has windows XP, bt having problem while logging on laptop which has windows 7 home edition.
Please help me how to login thru developer.....
Edited by: user9243989 on Jun 13, 2010 12:36 AM

Set the environment variable ORACLE_HOME to point to the XE database.

Can't connect to Express Edition 11g by sql developer

hello,
i installed the 11g edition and try to connect to it by sql developer. it didn't work, then I noticed there was an older version (10g) on the laptop. So i removed both, and installed the 11g version, but still it doesn't work.
My laptop runs on 32-bit windows 7 so I got the 32bit installer of 11g.
I checked several other threads, but didn't found a solution.
Some information:
connecting by sqlplus
SQL*Plus: Release 11.2.0.2.0 Production on Di Nov 8 09:34:25 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: system
Enter password:
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
tnsping
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 08-NOV-2011 09:32:43
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTOCOL=TCP)(HOST=fe80::7944:fff9:594b:a534%12)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=fe80::831:366f:f5fe:eab5%16)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.21.74)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=2001:0:5ef5:79fb:831:366f:f5fe:eab5)(PORT=1521)))
OK (0 msec)
lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 08-NOV-2011 09:29:24
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 08-NOV-2011 08:51:17
Uptime 0 days 0 hr. 38 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\W7-008436\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=W7-008436.iconos.be)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=W7-008436.iconos.be)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully

bop wrote:
The error message indicates that Oracle XE is not running. You can check that in several ways, e.g. by entering Computer Management - select Services and check if OracleServiceXE and OracleXETNSListener are running.
You can also check log files (*.log,*.trc) in directory C:\oraclexe\app\oracle\diag\rdbms\xe\xe\trace and look for error messages.the services were started.
I found an error in the "alert_xe.log"
Errors in file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_j000_388.trc:
ORA-12012: error on auto execute of job "SYS"."BSLN_MAINTAIN_STATS_JOB"
ORA-06550: line 1, column 807:
PLS-00201: identifier 'DBSNMP.BSLN_INTERNAL' must be declared
ORA-06550: line 1, column 807:
file xe_j000_388.trc: Trace file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_j000_388.trc
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
Windows NT Version V6.1
CPU : 2 - type 586, 2 Physical Cores
Process Affinity : 0x0x00000000
Memory (Avail/Total): Ph:2120M/3063M, Ph+PgF:4631M/6124M, VA:1095M/2047M
Instance name: xe
Redo thread mounted by this instance: 1
Oracle process number: 27
Windows thread id: 388, image: ORACLE.EXE (J000)
*** 2011-11-14 08:35:58.999
*** SESSION ID:(102.5) 2011-11-14 08:35:58.999
*** CLIENT ID:() 2011-11-14 08:35:58.999
*** SERVICE NAME:(SYS$USERS) 2011-11-14 08:35:58.999
*** MODULE NAME:(DBMS_SCHEDULER) 2011-11-14 08:35:58.999
*** ACTION NAME:(BSLN_MAINTAIN_STATS_JOB) 2011-11-14 08:35:58.999
ORA-12012: error on auto execute of job "SYS"."BSLN_MAINTAIN_STATS_JOB"
ORA-06550: line 1, column 807:
PLS-00201: identifier 'DBSNMP.BSLN_INTERNAL' must be declared
ORA-06550: line 1, column 807:
PL/SQL: Statement ignoredso apparently somewhere the parameter DBSNMP.BSLN_INTERNAL is not declared, but how do i fix it?
bop wrote:
I don't quite understand the mention of hostname related to sqlplus, do you have several Oracle installations? On a machine with Oracle XE you can normally select "Run Sql Command Line" and you are prompted like this:
SQL*Plus: Release 11.2.0.2.0 Production on To Nov 10 23:47:26 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> connect system/pwd
Connected.
SQL>it was a reply to the post of orafad

SQL Developer and Oracle Database 10g Express Edition, Connection Problem

I am using SQL Developer version 1.2.1 and am connecting to a 10g database on a windows xp.
Up until today there have been no problems with the connection. When I tried to connect to the database and have not been able to.
The error states that "...listener refused the connection with the following error: ORA-12505, TNS; listener does not currently know of SID given in connect descriptor..."
Also tried to log into the database home page but page doesn't load...

I'd bet the database is down.
Try a login through sqlplus ("Run SQL Command Line" in the Oracle Express Edition 'Start' menu).
Do a CONN / AS SYSDBA
If you get a message about database or memory area not available, try STARTUP.
If that doesn't work, you are best off in the General Database forum or the Express Edition forum.
You'll probably get the most expert response in General Database, but the Express Edition forum can be gentler on newbies (as it is more accepted that questioners are not and do not have access to full-time DBAs).

Editing views in Oracle SQL Developer

Hi All,
I have only just downloaded Oracle SQL Developer and have vreated a view. Now I want to be able to go back to that view and edit. When I right click on the view, it gives the option to edit but my scripts to edit isn't there, morre or less telling me to start all ove r again.
Can some one help on this or am I just to new to the program.
Many thanks
Cube60

Hi,
I don't seem to get waht you mean. When I right click on my view, then I choose edit, then on the first tab, Entire SQL query, mine comes up as blank.
When inserting new records on a table with its primary keys based on sequence numbers, it does not automatically pick the nextval in the sequencce.
For example, before downloading SQL Developer, I used to work in SQLplus and I have created records and have now moved them from that table to history table for records purpose. Lets say I have moved or deleted records with empid 8 -101 to a history table without a link between my source table and my destination table. The next record I should be allowed to enter in SQL Developer should be 102 and not empid 9 as it presently does.
SQL> select seq_empid.currval from dual;
CURRVAL
101
Any comments or way round this?
Thanks

SQL Server 2014 Developer Edition

Microsoft is no longer offering version 2012 developer edition. So, is SQL Server 2014 developer edition ok to use with SQL Server 2012? Thanks.

AFAIK you can ask/purchase developer edition in local MS office.. But it is certainly OK to use SQL Server 2012 Dev Edition to manage servers from different versions.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Which SQL server edition do I need? Developer or Standard?

I currently work for a large firm using SQL Server 2012 with Management Studio - I use this to connect to our database and run querys against. I also use Visual Studio 2013 to create .rdlc report files.
I need to replicate what I'm doing for the large firm, but on a much smaller scale. All I need to be able to do is restore a database to a SQL Server that is anywhere between 10-20GB in size, use SQL Management Studio to run queries against that restored
database, and create the same type of reports I am creating using Visual Studio 2013 (.rdlc files).
I think because the database to restore is larger than 10GB I can't get away with the express edition. Can I just use the Developer edition? Or do I need the standard edition?
thanks in advance.

Development edition licenses can be used to install anything that isn't production, provided that everyone that connects to the server has their
own development license. MSDN licenses can be used as well if everyone has an MSDN license.
http://sqlmag.com/sql-server-2014/sql-server-2014-developer-edition-licensing
If you are going to do some test you are ok with developer edition otherwise you need to go for standard edition.

Edit the results list in sql developer 1.5

Hi
is there someone that know if it is possible to make a querry in sql developer and then edit in the results list?
I have tryed but can not se how.
In my company we are using both toad 9.7 and sql developer and the users would like to update the data in the results list .It is possible in toad and can be done with less risk.
thank you
steen ostersen

No, but you can vote on http://htmldb.oracle.com/pls/otn/f?p=42626:39:2887745563411926::NO::P39_ID:4902 to add weight for implementing sooner...
Have fun,
K.

SQL Developer Data Modeler -Editing the Legend

Hi,
I have installed SQL DEVELOPER Version- 3.0.04. I am creating the data modeler diagrams(Relational and Logical) using the SQL Data Modeler.I would like to know whether the following features are available in this version or the latest version of SQL DEVELOPER.
1) Remove the existing legend attributes (Say:Author,Created on,Changed By etc) for both relational and logical diagrams.
2)Add new attribute to the Legend .(Say: A description for the Barker notation used in ERDs .)
Regards
Anupam
Thanks in Advance
Edited by: 898511 on Nov 22, 2011 3:34 AM

I answered my own question. In case anyone doesn't already know. Easy enought...
right click on the diagram
-> unselect "Auto Route"

SQL Developer 2.1 no longer allows to edit another granted schemas

Hello,
Just switched from 1.5.5 to 2.1 and going back!
In 1.5.5 I was able to logon as me (developer) and edit functions of batch schemas. Guess what! Not any more in 2.1!! Even if my priviliges allows me to do this!!
Any ideas how to bypass this problem?
I like 2.1, espesially because they fixed a bug with SELECT from the external tables, but editing alone is killing all the advanages!!

Our batch is running under BATCHADM schema. Every developer can edit this schema in development region and change functions and packages, and then migrate changes to the production.
When we switch to SQL Developer 2.1 we can see other users, including BATCHADM, open its packages and bring source to the editor. Thats it. You cannot edit it - source code is protected. You cannot add or insert or delete. It looks like editor is opening it in read-only mode. The only source you can edit is under your own schema.
When you go back to version 1.5.5 everything works like it should be.

SQL Developer Edition.

Similar Messages

Maybe you are looking for