SQL Developer install problems for Windows 7 Home edition

Hi there,
I understand Windows 7 64-bit is not supported for oracle 11gR2 but I installed it anyway.
This is not my problem.
I am trying to install SQL Developer and am getting this error when I click on the set up:
Unable to launch the Java Virtual machine, located at path:
C:\Program Files(x86)Java\jdk1.6.0_21\bin\msvcr71.dll
When I check the version of my java it is correctly displaying 1.6.0_21 for my 64 bit.
I read that you need the 32 bit one installed as well and I do. In my Program Files there is a java and a \jdk1.6.0_21 folder. In the bin directory it does not have this .dll:
msvcr71.dll
Is that the problem, because i have heard of other people getting sql developer working on their Windows 7 home laptops but they are old posts and I'm not getting any reply.
I also changed the Environmental variable for the path, such as:
C:\Program Files (x86)\Java\jdk1.6.0_21
C:\Program Files (x86)\Java\jdk1.6.0_21\bin
C:\Program Files (x86)\Java\jdk1.6.0_21 /bin
and none of the 3 above worked for me either.
Any suggestions are appreciated!

I unzipped the sql developer download to C:\Windows and it unzipped fine. I went into my folder of sql developer, double clicked the sql developer.exe and it asked for the path for java. I clicked Browse and the default was C:\Program Files(x86)\Java\jdk1.6.0_21\bin so I chose the java from this folder. It accepted the argument, tried to start sql developer, and came up with the same error, so something is still not right that I am not understanding??

Similar Messages

Desktop Policies for Windows Home Edition

Can policies be applied to Windows Home Edition?

It will most likely work, but "Home Edition" is not supported.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"crobison" <[email protected]> wrote in message
news:[email protected]..
>
> Can policies be applied to Windows Home Edition?
>
>
> --
> crobison
> ------------------------------------------------------------------------
> crobison's Profile: http://forums.novell.com/member.php?userid=431
> View this thread: http://forums.novell.com/showthread.php?t=340306
>

Sql developer install problem

Hi,
I'm on W'XP machine trying to make clean nstall Oracle SQL Developer, I did downloaded most recent version but it doesn't have as call "Connection tab" to make new connection !
My version is 2.1.1.64 for Windows 32b. FILE/NEW/CONNECTION/OK doesn't work either. Having this error:
oracle.classloader.util.AnnotatedNoClassDefFoundError:
     Missing class: oracle.javatools.db.DBLog
     Dependent class: oracle.jdeveloper.db.DatabaseConnectionStores
     Loader: ide-global:11.1.1.0.0
do I need any other oracle client to be installed ? Or do any other changes to path,etc..
Can anybody give ad advice what coudbe wrong, I also tried to download lower version 1.5.4.59 with no success, could not open it at all.
tx
v

Just played and got it right!
I used download without jdk, having it separately, then pointed to the right java.exe

Invalid file - SQL Developer 1.2 for Windows download

I attempted to download the latest verion(1.2) for Windows with JDK and failed.
Download process completes downloading the file, but it then complains that its not a valid ZIP file!
cheers.
Manod

It's not a bug. There can be a number of reasons why, when you attempt to download a file, you do not get the full download. One of which is just that you lose the connection and that can depend on where and when you download, another is that there can be fire wall issues on the client site. There are times when the issue is on the Oracle side and this too can be as a result of different things. In this case, there is a specific OTN forum for site issues. I have not seen any such mention of a problem or a downtime or anything else in the past few weeks. All I meant is that if you have a problem with a download, you might try again later. We have had a few thousand SQL Developer downloads in the past few days, so there is no issue on our side.
Sue

SQL Developer paste problem for large text in Linux

Hello,
I have a problem. I cannot paste large text (> 5000 lines) into the editor of a clob column. Pasting in general works. I mean I can paste the whole content e.g. to gedit or I can paste partially the text into the sql developer editor but not as a whole.
Colleagues on a Mac can paste the text into the editor. So it should not be about DB settings.
Can anyone tell me which setting I have to change?
SPECS:
Ubuntu 13.10
java version "1.7.0_25"
OpenJDK Runtime Environment (IcedTea 2.3.12) (7u25-2.3.12-4ubuntu3)
OpenJDK 64-Bit Server VM (build 23.7-b01, mixed mode)
Info
Oracle SQL Developer 3.2.20.09
Version 3.2.20.09
Build MAIN-09.87
Copyright © 2005, 2012 Oracle. All Rights Reserved. Alle Rechte vorbehalten.
IDE Version: 11.1.1.4.37.59.48
Product ID: oracle.sqldeveloper
Product Version: 11.2.0.09.87
Version
Komponente    Version
==========    =======
Java(TM)-Plattform    1.7.0_25
Oracle-IDE    3.2.20.09.87
Versionierungsunterstützung    3.2.20.09.87

I've the same problem and posted it under: 'SQL Dev 2.1 RC1 - "scan defines" doesn't work in opened *.sql files '
I seems, that it doesn't work now, though it worked in SQLDEV 1.5.5
@Chris

Error Downloading SQL Developer 1.1 for Windows w/o Java

I've now tried 3 times to download sqldeveloper-1.1.2.2579-no-jre.zip . WinZip cannot use it and indicates that there has been a download failure. Then, in Netscape and IE I now get the message
Downloading the file sqldeveloper-1.1.2.2579-no-jre.zip.
InterScan Web Security will check the file after the download is complete.
NOTE: Do not click Refresh or Back, or navigate to another page or the download will fail.
InterScan Web Security detected the following in HTTP traffic:
Item: http://download-west.oracle.com/otn/java/sqldeveloper/sqldeveloper-1.1.2.2579-no-jre.zip
Action: deleted
Reason: Violation of a compressed file restriction
-- File: sqldeveloper-1.1.2.2579-no-jre.zip, security warning: Exceed_File_Count_Limit
The uncleanable file is deleted.
Hope you can help!!

I was able to download sqldeveloper.exe for windows which I realised later wasn't for Desktop OS. Can you suggest to me one which works on Desktop windows?

OSX Printing Problems after Installing Bonjour for Windows in Parallels

Since I installed Parallels a few weeks ago I had no need to print from Windows. Yesterday I had need so I installed the Apple Bonjour for Windows and the necessary print driver (Brother HL-1430) and was able to print.
The issue I have is that I can no longer print from OS-X. In fact every time I try and print from whatever program the program quits unexpectedly. I have tried all the solution offered on Apple's support web site but to no avail. My printer is connected wirelessly via an Airport Express. This works fine for Parallels with Windows XP and for our two other Macs. It just does not work with my iMac and this is only since I installed Bonjour for Windows on this machine.
Can anyone help with a solution?
iMac, Powerbook G4, iBook Mac OS X (10.4.9)
PowerBook G4 Mac OS X (10.3.7)

Since I installed Parallels a few weeks ago I had no need to print from Windows. Yesterday I had need so I installed the Apple Bonjour for Windows and the necessary print driver (Brother HL-1430) and was able to print.
The issue I have is that I can no longer print from OS-X. In fact every time I try and print from whatever program the program quits unexpectedly. I have tried all the solution offered on Apple's support web site but to no avail. My printer is connected wirelessly via an Airport Express. This works fine for Parallels with Windows XP and for our two other Macs. It just does not work with my iMac and this is only since I installed Bonjour for Windows on this machine.
Can anyone help with a solution?
iMac, Powerbook G4, iBook Mac OS X (10.4.9)
PowerBook G4 Mac OS X (10.3.7)

Problems installing Skype for Windows Desktop on my 8.2 system

My Windows 8.1 computer is telling me the Skype app has changed so I must uninstall and re-install Skype for Windows Desktop. I duly did this but I cannot access Skype, it won't accept my Skype name and password combination. Three times I have gone through the process to change my password, which takes me through the process of changing my Microsoft account password because I had to create one when I bought my computer and link absolutely everything to it. This still doesn't solve the issue and I have now reached the end of my tether with Windows 8.1. It's been nothing but trouble, completely non-user friendly and I am not a dim wit when it comes to technology. What must I do to be able to access Skype?

I've downloaded Skype Translator & that works on my tablet. Why on earth did they 'break' the normal version of Skype?

Can SQL Developer be used for Oracle Support "HTML Output" Diag Scripts ?

Hi All,
Oracle Support has asked me to run a diagnostic script (OTL_Diag.sql for anyone familar with the script) that produces output in HTML format using SQL*Plus to help troubleshoot an OTL problem we are having. Unfortunately I don't have SQL*Plus installed and my company is not on board with me installing it because of the SQL*NET connection required. Instead I have access to SQL Developer 3.1.0.7. While this works fine for most situations I'm having problems generating the required .html output file that Support needs.
I've tried runing the OTL_Diag.sql a couple of ways using SQL Developer. First, I opened the file from SQL Developer and using the Run Script functionality (F5) I executed the code that way. This method did give me an opportunity to input the necessary parms and it did create the 'start' of the HTML file on my (Windows) file system, but the script seemed to abort with a java error that indicated some sort of format error (sorry, I'm not a java person so I can't provide any more info, but I'll be glad to get the exact error message if anyone thinks that will help solve my issue).
My second approach was to open a SQL Window where I typed in @C:\OTL_Diag.sql without quotes. This approach also gave me the opportunity to enter the necessary input parms and it seemed to end normally. It also created the 'start' of the diaganostic output file on my Windows file system, but it 'completed' before any of the 'real' diaganostic output was written to the .html file.
The Metalink note clearly specifies that the OTL_Diag.sql script is to be run with SQL*Plus 10.2 or above so I don't think I can complain too loudly to Oracle about this...but given that I don't have access to this product (and it is useless for me to again ask to install it) I am hoping someone out there has some ideas or insight as to how I can use SQL Developer to execute this diag script in a manner that will produce the required .html output file.
Thanks in advance to anyone taking time to read my post !!
Jeff
Edited by: user13111861 on Jul 10, 2012 6:43 PM
Edited by: user13111861 on Jul 10, 2012 7:51 PM

>
As a result, at this point in time my only available tool to run the OTL_Diag.sql script (provided by Oracle Support) is SQL Developer
>
Then you will have to edit the script, break it into pieces, execute each piece manually and save the output to feed into the next piece as required based on what the script is actually doing. Don't post the script or contents as that will likely violate your support agreement.
As I already mentioned the script may be using syntax and/or commands that are simply not supported by sql*developer. One likely area is the script may be producing intermediate output scripts that are then processed by a later portion of the script. If that is the case then my suggestion to execute the pieces manually should work but you will need to do some trial-and-error to see.
Even if you appear to be successful you will still have an issue when you communicate the results of your 'test' to Oracle support and they determine you didn't follow their instructions to use the proper tool.
Sounds like your management is either ignorant or incompetent so I suggest you cover yourself by documentating the instructions from Oracle support and the direct orders you were given to disregard those instructions. No need to discuss that issue further but clearly there are resources available somewhere in the org that has the proper privileges or they wouldn't be able to maintain and support the database. If they want to pay for support they should heed their advice. Nuff said.

SQL Developer usage problem

Hi All
I have installed sql developer V 4.1 to my computer and all the necessary java apllications have been installed. When i opened the program menu screens can only be shown when i get my cursor over it as shown in the below. İ have format my OS system because i think this can be because of my region and registy settings. So at the final i have a fresh Windows 8.1 Eng X64 Ent edition. and up to dated java version but same problem.
Please give an opinion to me
Thanks.

Hi Jeff,
I would like add some input:
I have similar issue, but in different case.
SQL Developer installed on real Win7 machine (no virtual) and uses the appropriate jdk (latest in each case: 7 for v4.1 EA1 and 8 for v4.1.EA2).
It works fine and correct on the desktop, but when I try to continue my task over Remote Desktop its behavior is like as the described one.
And I have feeling that happens during switches from v3.x to v4.x (sorry don't remember exactly).
Hope it helps in your investigation.
Best Regards

SQL Developer video problems on Parallels (Win XP)

I am running ORACLE 11G, APEX and SQL Developer on my MacBook pro. Initially I installed 1.5.4 SQL Developer and I stared having problems when editing SQL scripts.
Edit window, blacks out the lines which are not being viewed. Very annoying when working on complex scripts.
Although I've reported this problem to Parallels support, given that SQL Developer is the only application causing the problem is making me think it is more likely an issue with SQL Developer.
Since then I went back to 1.5.1 version and having same problem.
Any body else having this problem?
I might try 1.5.4 with patch #2 . . .
Details related to SQL Developer installed:
Oracle SQL Developer 1.5.1
Version 1.5.1
Build MAIN-5440
Copyright © 2005,2008 Oracle. All Rights Reserved.
IDE Version: 11.1.1.0.22.49.35
Product ID: oracle.sqldeveloper
Product Version: 11.1.1.54.40
Version
Component     Version
=========     =======
CVS Version     Internal to Oracle SQL Developer (client-only)
Java(TM) Platform     1.5.0_06
Oracle IDE     1.5.1.54.40
Versioning Support     1.5.1.54.40
Edited by: APEX minded on 27/05/2009 17:12

I will post this info to help people who may have similar problem.
The work around I found is to run Parallels in full-screen mode.
Parallels support haven't provided a fix for this yet.

Serious UI issues in SQL Developer 4.0 for Mac

I've encountered some serious UI issues in SQL Developer 4.0 for Mac (4.0.0.13) that impact it up to the point where it becomes unusable.
If the database and tables are expanded in the "Connections" view, sometimes a node in the tree seems to become sticky. Whenever you scroll the up or down, it will immediately scroll back to make the old selection visible again. If you want to work with an item that's outside the current view (e.g. to collapse the "Tables" node), you can no longer use it. SQL Developer needs to be restarted.
If the context menu is opened (ctrl click), it appears in the wrong place. It's too far to the right and bottom. If you then move the mouse pointer towards the menu, a rectangle appears and follows the mouse pointer as if you had initiated a drag and drop operation.
If the "Data" tab of a table is selected and if a cell is clicked to edit the cell value, the text cursor is drawn in the wrong position. It can be off by more than one character and it is often drawn in the middle of a character instead of between two characters. It's hardly possible to edit the cell value as you cannot tell for sure where insertions and deletions will happen. You basically need to copy the value into a separate editor, edit it there and copy it back.
The scrolling in the "Data" tab of a table is a pain. For no obvious reason, it first scrolls downwards a few rows and then jumps to the top (at least using a Magic Mouse). If all rows have been loaded, this problem seems to disappear. But generally, the scrolling distance is far too short. With a long finger swipe, one would expect to scroll the contents by several pages. However, it only scrolls about half a page. For shorter swipes, it's similar. It sometimes only scrolls by a few pixels.
Am I the only one to experience these severe problems? Or is the Mac version not as mature as the Windows version yet?

In terms of diagnosis, perhaps not -- probably very time-consuming to debug. I did find some unpublished bugs against dual monitor use ...
Bug 13727841 - FORUM: 64BIT WIN7 SOME DIALOGS SHOW ON DISPLAY 1 WHEN SQLDEV ON DISPLAY 2
Bug 18504928 - NEW CONSTRAINT UI MENU IN TABLE DIALOG AT WRONG LOCATION ON DUAL MONITOR
The first turned out to be an issue in the 64-bit Java AWT libraries, not the 32-bit libraries, and specifically for Windows 7 as opposed to, say XP, but this was all quite a bit in the past and was fixed for 4.0. The second one (on 64-bit Linux), however, just came in yesterday, so you can wait to see if a fix for that also covers your situation or, if you are able, pursue it directly with Oracle Support.

Outlook 2010 won't open after installing icloud for windows

Hi,
Installed icloud for windows at work this morning after moving my MM account to icloud at home on my MBP.
Installed ok but after ticking the mail, contacts, calendar and bookmark boxes on icloud for windows Outlook 2010 starts but won't open and stays on the "Processing..." for a long time before I close it.
Also the icloud for windows control panel won't reopen except the time it opens after installation. I have tried removing it and rebooting but after it's installed, if you close the control panel it won't reopen although it's still running in Task Manager. Closing it in Task Manager and restarting doesn't make a difference.
Currently I removed, rebooted and reinstalled and only have the bookmarks ticked and outlook works ok but the control panel still won't reopen.
I am on a exchange server so don't know if this is part of the problem. Not real worried about mail but would like calendars working again.
Very thankful for any help you can offer.

I had the same problem after successfully moving from MobileMe to iCloud yesterday on my PC, ipad and iphone.
Today I couldn't open Outlook 2010. An Outlook dialogue box for my MobileMe email account kept asking for the email password, and although I put the password in, it kept re-appearing.
I turned off Norton spam temporarily, because I noticed Outlook was stuck processing the Norton plug ins at opening, and managed to open Outlook but the programme crashed every time I tried to access my email account settings (I thought I would try to delete the MobileMe email account).
I then opened the Control Panel for iCloud and unchecked the Mail with Outlook box, which has enabled Outlook to work again. The @me.com email account was gone when I checked the email accounts. I never needed to use the @me.com email account anyway.
How frustrating and such a waste of my time.
Does anyone know what difference it makes if the MobileMe/iCloud email is not connected to Outlook? Does it really make any difference when you have your email accounts in the iPad and iPhone anyway?

SQL Developer connection problems

I am trying to run for the first time SQL developer and the connections window isnt showing. I tried also to make file>new>and choosing database connection and nothing happens. Also i tried loading the connections toolbar but the toolbar isnt available it isnt listed under the view tab.
Can anyone please help me not only me have the same problem.
I am running it on Windows 7 Ultimate 32-Bit. I tried all versions and it is still the same and tried also all patches and upgrades but no effect.
Can anyone please help
Thanks

Well, My java version is :
java version "1.6.0_15"
Java(TM) SE Runtime Environment (build 1.6.0_15-b03)
Java HotSpot(TM) 64-Bit Server VM (build 14.1-b02, mixed mode)
And the exceptions are the next :
_execv() failed, err=2Exception initializing 'oracle.dbtools.raptor.RaptorDBAddi
n' in extension 'Oracle SQL Developer': java.lang.ExceptionInInitializerError
at oracle.dbtools.raptor.RaptorDBAddin.initialize(RaptorDBAddin.java:126
at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManage
rImpl.java:407)
at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins(AddinManag
erImpl.java:214)
at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(Ad
dinManagerImpl.java:128)
at oracle.ide.IdeCore.initProductAndUserAddins(IdeCore.java:1949)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1573)
at oracle.ide.Ide.startup(Ide.java:703)
at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
at oracle.ideimpl.Main.start(Main.java:184)
at oracle.ideimpl.Main.main(Main.java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:62)
at oracle.ide.boot.PCLMain.main(PCLMain.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:
189)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:89)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:65)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
Caused by: java.lang.NullPointerException
at oracle.i18n.text.OraTerritory.getInstance(OraTerritory.java:101)
at oracle.dbtools.raptor.config.DBConfig.<clinit>(DBConfig.java:325)
... 33 more
Exception initializing 'oracle.dbtools.raptor.standalone.RaptorStandaloneAddin'
in extension 'Oracle SQL Developer Extras': java.lang.NoClassDefFoundError: Coul
d not initialize class oracle.dbtools.raptor.config.DBConfig
at oracle.dbtools.raptor.utils.URLChooserShortcuts.<clinit>(URLChooserSh
ortcuts.java:35)
at oracle.dbtools.raptor.standalone.RaptorStandaloneAddin.initialize(Rap
torStandaloneAddin.java:178)
at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManage
rImpl.java:407)
at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins(AddinManag
erImpl.java:214)
at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(Ad
dinManagerImpl.java:128)
at oracle.ide.IdeCore.initProductAndUserAddins(IdeCore.java:1949)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1573)
at oracle.ide.Ide.startup(Ide.java:703)
at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
at oracle.ideimpl.Main.start(Main.java:184)
at oracle.ideimpl.Main.main(Main.java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:62)
at oracle.ide.boot.PCLMain.main(PCLMain.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:
189)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:89)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:65)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
Exception in thread "EditorLoader" java.lang.NoClassDefFoundError: Could not ini
tialize class oracle.dbtools.raptor.config.DBConfig
at oracle.dbtools.raptor.oviewer.base.ViewerAddin.loadXMLEditors(ViewerA
ddin.java:221)
at oracle.dbtools.raptor.oviewer.base.ViewerAddin$1$1.run(ViewerAddin.ja
va:130)
at java.lang.Thread.run(Thread.java:619)
Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: Could not
initialize class oracle.dbtools.raptor.config.DBConfig
at oracle.dbtools.raptor.oviewer.base.NavSelectionListener.viewSelection
Changed(NavSelectionListener.java:176)
at oracle.ide.view.View.fireViewSelectionChangedImpl(View.java:495)
at oracle.ide.view.ViewDecorator.fireViewSelectionChangedImpl(ViewDecora
tor.java:59)
at oracle.ide.view.View.fireViewSelectionChanged(View.java:485)
at oracle.ide.view.View.updateSelectionImpl0(View.java:444)
at oracle.ide.view.View.updateSelectionImpl(View.java:429)
at oracle.ide.view.View.updateSelection(View.java:306)
at oracle.ideri.navigator.DefaultNavigatorWindow$4.viewSelectionChanged(
DefaultNavigatorWindow.java:1108)
at oracle.ide.view.View.fireViewSelectionChangedImpl(View.java:495)
at oracle.ide.view.View.fireViewSelectionChanged(View.java:485)
at oracle.ide.view.View$2.actionPerformed(View.java:349)
at javax.swing.Timer.fireActionPerformed(Timer.java:271)
at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThre
ad.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.
java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
This is a bug to resolve, Oracle should fix this error for OS 64 bits, on Windows 7 or other. Thanks

How to solve Oracle SQL Developer connection problem ?

Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?

user8860348 wrote:
Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?username: sys
password: enter_your_correct_password given at the time of oracle installation
role: select sysdba if you would connect as sysdba else select normal for users other than sys
hostname: enter your oracle server hostname or ip address eg:- 192.168.11.12
to find the hostname open terminal/command prompt in oracle installed machine
type ---> hostname
type ---->ping hostname
you can find the ipaddress of the server
port number: 1521 (default) ----> i guess , else check the port number in the tnsnames.ora file under your ORACLE_HOME/network/admin folder
SID: DB1
try it
Good Luck

SQL Developer install problems for Windows 7 Home edition

Similar Messages

Maybe you are looking for