SQL Developer User Information Directory, supported UNC path??

Hi. I'm trying to get the SQL Developer installed on an Citrix-server, and to get this working in a proper way, I have to get the SQL Developer User Information Directory to be unique for each user. I've tried to follow the instructions that comes with the Installation Instructions, but it seems to me that it is only statement taht is supported in this issue is to set a path to the local disk, and that a shared nertowk drive or a system variable with a %var_name% statement doesn't work.
How does the Java resolve the system variables name in this program?
Anyone that has any suggestions / solutins for this?
OS is W2003 server with Presentation Server 4.0.
Message was edited by: Brommelomm
user496292

This means that I really cannot use a "dynamic variable", but a "static variable" e.g. a path-name, not an UNC path? Or do I get it wrong here?
I have allready a variable that is defined to get the users "homeshare", but SQL_Developer doesn't seem to know what to do with this variable other than putting in it the "C:\ProgramFiles\SQLDeveloper\.. path...

Similar Messages

How to delete saved passwords in SQL Developer User Profiles

Hi
Can anyone advise on how to delete (or flush-out) saved passwords in SQL developer connections? I have a serious security concern about saved passwords at user level and need a quick method to remove them from the backend without actual user's intervention.
An early response is highly appreciated.
Thanks
UJ

I have a serious security concern about saved passwords at user levelIf you could share more about your concerns, it might help us address or alleviate said concerns. Basically if your user's desktops are secure, then so are the passwords.
To delete them w/o user intervention you would need to delete their connections by removing the file(s) from their installs. To prevent the problem from happening again, you'd need to put down a new sqldeveloper.conf file in their bin directory that would keep them from saving passwords - example here
http://www.thatjeffsmith.com/archive/2012/04/how-to-disable-save-password-in-oracle-sql-developer/

SQL Developer user defined reports (appropriate utilization)

I have used SQL developer on a limited basis but I have never created a user defined report. Can someone compare and contrast the
types of user defined reports that can be created via SQL developer versus the types of user defined reports that can be created via
a tool such as Crystal Reports or similar tool.

Hi user7753875 -
I agree with reidelme that it won't match the capabilities for fancy organisation/output of tools like Crystal Reports, but you can do interrelated parent/multiple child reports.
Check out the Reports tab on the SQL Developer Exchange for some examples of what other users have done with this.
Brian Jeffries
SQL Developer Team
Edited by: bjeffrie on Jun 3, 2011 5:01 PM
Turns out no one has used that in a long time. You will have to do some interpretive cut/past from xml given by web site & report editor in SQL Developer. Here is the "Who" report (master+2 child reports) from the exchange in a format you can use the import function from "User Defined Reports" on.
<?xml version="1.0" encoding="UTF-8" ?>
<displays>
<display id="57507b3a-0130-1000-8008-a9fec67b8254" type="" style="table" enable="true">
     <name><![CDATA[Who]]></name>
     <description><![CDATA[
A Report to show active seesion and some details about there activities. Includes 2 Child-reports for Active SQL and PID for the process supporting the session.
]]></description>
     <tooltip><![CDATA[Who is logged in and what is he doing]]></tooltip>
     <drillclass><![CDATA[null]]></drillclass>
     <CustomValues>
     </CustomValues>
     <query>
          <sql><![CDATA[SELECT sid, serial#, username, status, server, machine, program FROM v$session order by sid]]></sql>
     </query>
     <display id="null" type="Child" style="Table" enable="true">
          <name><![CDATA[ActiveSQL]]></name>
          <description><![CDATA[]]></description>
          <tooltip><![CDATA[]]></tooltip>
          <drillclass><![CDATA[null]]></drillclass>
          <CustomValues>
               <TYPE>null</TYPE>
          </CustomValues>
          <query>
               <sql><![CDATA[select c.spid b1, b.osuser c1, b.username c2, b.sid b2, b.serial# b3, a.sql_text,b.status,to_char(b.logon_time, 'DD-MON-YYYY HH24:MI:SS') from v$sqltext a, v$session b, v$process c where a.address = b.sql_address and b.paddr = c.addr and a.hash_value = b.sql_hash_value and b.sid = :SID order by c.spid,a.hash_value,a.piece]]></sql>
               <binds>
                    <bind id="SID">
                         <prompt><![CDATA[SID]]></prompt>
                         <tooltip><![CDATA[SID]]></tooltip>
                         <value><![CDATA[NULL_VALUE]]></value>
                    </bind>
               </binds>
          </query>
     </display>
     <display id="null" type="Child" style="Table" enable="true">
          <name><![CDATA[Process]]></name>
          <description><![CDATA[]]></description>
          <tooltip><![CDATA[]]></tooltip>
          <drillclass><![CDATA[null]]></drillclass>
          <CustomValues>
               <TYPE>null</TYPE>
          </CustomValues>
          <query>
               <sql><![CDATA[select p.spid,p.addr,s.sid,s.server,p.username,s.osuser,p.program,t.value/1024/1024 PGA_Mb from v$process p,v$session s,v$sesstat t where p.addr=s.paddr and s.sid=t.sid and s.sid = :SID and t.statistic#=20]]></sql>
               <binds>
                    <bind id="SID">
                         <prompt><![CDATA[SID]]></prompt>
                         <tooltip><![CDATA[SID]]></tooltip>
                         <value><![CDATA[NULL_VALUE]]></value>
                    </bind>
               </binds>
          </query>
     </display>
</display>
</displays>
Edited by: bjeffrie on Jun 3, 2011 5:01 PM

Need help from SQL Developer users

I’d like to run Decision Tree models in SQL Developer for monthly predications after running in ODM manually.
I created PL/SQL Packages under Tools from ODM, and compiled them in SQL Developer successfully. According to Oracle documents, I should be able to run the same DT models (using create or replace PACKAGE BODY "DATAMININGACTIVITY1" .......). However, I am unable to run the entire “Package Body” or any part of it. One of the error messages shows "The select program is in an invalid state for running". I also tried to use "Call" to call functions to run my SQL Package, but that didn't work either. So far, the only SQL works for me is to create a view from a table.
Please share how you use SQL to run models. Thanks, DC

In PL/SQL Block you will see something like below.
In the most simple case you need to supply to arguments ( see bold )
CASE_TABLE := *'YOUR_TABLE_NAME_FOR_MODEL_BUILD'*;
MODEL_NAME := *'MODEL_NAME_FOR_YOUR_NEW_MODEL';*
That would be enough to build a model.
Thanks,
Jim
DECLARE
CASE_TABLE VARCHAR2(200);
ADDITIONAL_TABLE_1 VARCHAR2(200);
MODEL_NAME VARCHAR2(200);
CONFUSION_MATRIX_NAME VARCHAR2(200);
LIFT_RESULT_NAME VARCHAR2(200);
ROC_RESULT_NAME VARCHAR2(200);
TEST_METRIC_NAME VARCHAR2(200);
FEATURE_TABLE VARCHAR2(200);
MAPPING_TABLE VARCHAR2(200);
DROP_OUTPUT BOOLEAN;
BEGIN
CASE_TABLE := *'YOUR_TABLE_NAME_FOR_MODEL_BUILD'*;
ADDITIONAL_TABLE_1 := NULL;
MODEL_NAME := *'MODEL_NAME_FOR_YOUR_NEW_MODEL';*
CONFUSION_MATRIX_NAME := NULL;
LIFT_RESULT_NAME := NULL;
ROC_RESULT_NAME := NULL;
TEST_METRIC_NAME := NULL;
FEATURE_TABLE := NULL;
MAPPING_TABLE := NULL;
DROP_OUTPUT := NULL;
DATAMININGACTIVITY1.DT_1428168079_BA(
CASE_TABLE => CASE_TABLE,
ADDITIONAL_TABLE_1 => ADDITIONAL_TABLE_1,
MODEL_NAME => MODEL_NAME,
CONFUSION_MATRIX_NAME => CONFUSION_MATRIX_NAME,
LIFT_RESULT_NAME => LIFT_RESULT_NAME,
ROC_RESULT_NAME => ROC_RESULT_NAME,
TEST_METRIC_NAME => TEST_METRIC_NAME,
FEATURE_TABLE => FEATURE_TABLE,
MAPPING_TABLE => MAPPING_TABLE,
DROP_OUTPUT => DROP_OUTPUT
END;
Edited by: jdadashev on Mar 12, 2010 9:08 AM

SQL Developer Data Modeling - Plotter Support

Is printing to a plotter fully functional yet? I have trouble getting the page setup to configure correctly for our plotter.

tried everything I could think of -
default printer before starting the app - default printer properties before starting the app - adjusted the plotter properties via the plotter menu before starting the app - adjusted the page setup properties via SQL Modeler menu - resized the model to show it fits on one page but it still prints to two pages.
we have a HP Designjet 800 42" with a roll as the source, I set the default to ANSI F with small margins but it only prints on two-thirds of the paper and goes to a second page. Tried both portrait and landscape orientation.
I was hoping that I would be able to print with landscape orientation and get everything to print in a continuous fashion. the import kind of stretches the objects across lengthwise.
so in sumation the page preview and the printed result are not always equal.
Hope this information helps - let me know if more feedback is needed?

J2SE path for SQL Developer

I have downloaded and installed SQL Developer 3.0 (JDK not included) for Linux as per Oracle's download page. The page advises that JDK 1.6.0_11 or greater must be installed.
$ java -version responds:
java version "1.6.0_20"
OpenJDK Runtime Environment (IcedTea6 1.9.9) (fedora-54.1.9.9.fc14-x86_64)
OpenJDK 64-Bit Server VM (build 19.0-b09, mixed mode)
Do I already have suitable JDK installed? And if so, how do I determine its full path?
When I run script /opt/sqldeveloper/sqldeveloper/bin/sqldevqloper for the first time, it prompts for the full path of a J2SE installation. Am I being asked for a path to my JDK installation? I don't know what to specify for the path, and the SQL Developer user guide is silent on how to identify this path. Or do I have to install something else before I can get SQL Developer to work?
My background is Oracle DBA, not Java, so I find all this JDK/JRE/J2SE stuff very confusing. Can any one assist with specific instructions on what I need to do to get this product working?
TIA,
Jon

Thanks, Jim.
I downloaded the JDK from Oracle and installed it. I now have /usr/java/jdk1.7.0. At SQL Dev first time startup, I specified that path as the path to the J2SE installation, and SQL Dev started with a popup message:
"You are attempting to run with Java 1.7.0
Running this product is supported with a minimum Java
version of 1.6.0_04 and a maximum version less than 1.7
This product will not be supported, and may not run
correctly if you proceed. Continue anyway?"
Click "Yes", and SQL Developer 3.0.04.34 starts.
Great! Oracle supplies a JDK which does not support an Oracle product?
Anyway, its working. Many thanks for your assistance.
Jon

Using UNC Path With Execute Process Task

I have an Execute Process task in which the process can either delete, get or put files to an SFTP site. The executeable takes arguments in the following format:
"host" "user" "password" "put" "full local path/filename" "full remote path/filename"
I have the task configured as follows:
RequireFullFileName: True
Executeable: \\server\groups\Development\ETLFiles\ETL_Utilities\ocsshhelper\ocsshhelper.exe
Arguments: sftp user password \\server\groups\Developmement\ETLFiles\ETL_Data_Files\CT_FS_Export_20081113.csv stateExport\export
WorkingDirectory: \\server\groups\Development\ETLFiles\ETL_Utilities\ocsshhelper
WindowStyle: Hidden
Arguments, Executeable and WorkingDirectory have been configured as Expressions. When I execute the package in BIDS from my Windows XP SP3 machine, The task fails with the following error:
[Execute Process Task] Error: In Executing "\\server\groups\Development\ETLFiles\ETL_Utilities\ocSSHHelper\ocsshhelper.exe" "sftp user password put \\server\groups\Development\ETLFiles\ETL_Data_Files\CT_FS_Export_20081113.csv stateExport\export" at "\\server\groups\Development\ETLFiles\ETL_Utilities\ocSSHHelper", The process exit code was "-532459699" while the expected was "0".
My domain account has 'effective' full control rights to the location of ocsshhelper.exe.
It could be that the executable does not support UNC paths, and I'm checking that. I have another package that uses this same application, but uses the physical path, and there are no problems. Does the Execute Process task have issues with UNC paths?
Thank you for your help
cdun2

Actually it doesn't work properly in SQL Server 2008 R2. I have a similar EP task. If I set the working directory to \\server\share\subdir the task fails. However, if I map a drive latter to the \\server\share and set working directory to <drive>:\subdir
it works

Unable to connect SQL Developer 4.0.2 to Oracle REST Data Services 2.0.7 (Apex Listener)

Background
1. Weblogic 10.3.6.0 running on Oracle Linux 6.5 with Oracle JRockit(R) (build R28.2.3-13-149708-1.6.0_31-20120327-1523-linux-x86_64, compiled mode)
2. Oracle Apex 4.2.1
3. Apex Listener 1.1.3
4. Apex and Apex Listener running on the Weblogic box above
5. SQL Developer 4.0.2 running on Windows 7 64 bit / Java 1.7.0_55
Updated Apex to 4.2.5 via p17966818_425_Generic.zip patchset. Apex environment running fine as do all applications via Listener 1.1.3
Updated Oracle Listener to the latest version of Oracle REST Data Services 2.0.7
Current Status
Apex Applications and RESTful services are running fine.
Problem
Unable to connect SQL Developer 4.0.2 to Oracle REST Data Services 2.0.7
Error message in SQL Developer - Cannot connect to DEV. HTTP/1.1 403 Target service not allowed
Additional Information
Steps followed -
1. The oracle users APEX_LISTENER and APEX_REST_PUBLIC_USER did not exist, so I ran apex_rest_config.sql from the APEX 2.4.1 patchset whilst connected sys as sysdba and provided the same password as APEX_PUBLIC_USER for both users.
2. I also ran
grant insert, delete on APEX_040200.wwv_flow_rt$privilege_groups to APEX_LISTENER;
alter session set current_schema = APEX_LISTENER;
create or replace synonym wwv_flow_rt$privilege_groups for APEX_040200.wwv_flow_rt$privilege_groups;
as per Oracle SQL Developer User's Guide Release 4.0
3. copied ords.war to apex.war
4. java -jar apex.war configdir /u01/app/oracle/admin/apex/devdomain1/
5. java -jar apex.war
Jun 5, 2014 5:15:31 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /u01/app/oracle/admin/apex/devdomain1/apex
Enter the name of the database server [localhost]:dbservername
Enter the database listen port [1521]:
Enter 1 to specify the database service name, or 2 to specify the database SID [1]:1
Enter the database service name:dbservicename
Enter the database user name [APEX_PUBLIC_USER]:
Enter the database password for APEX_PUBLIC_USER:
Confirm password:
Enter 1 to enter passwords for the RESTful Services database users (APEX_LISTENER,APEX_REST_PUBLIC_USER), 2 to use the same password as used for APEX_PUBLIC_USER or, 3 to skip this step [1]:2
Jun 5, 2014 5:16:52 PM oracle.dbtools.common.config.file.ConfigurationFiles update
INFO: Updated configurations: defaults, apex, apex_al, apex_rt
Enter 1 if you wish to start in standalone mode or 2 to exit [1]:2
6. java -jar apex.war user adminlistener "Listener Administrator"
Jun 5, 2014 5:18:52 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /u01/app/oracle/admin/apex/devdomain1/apex
Enter a password for user adminlistener:
Confirm password for user adminlistener:
Jun 6, 2014 5:19:12 PM AM oracle.dbtools.standalone.ModifyUser execute
INFO: Created user: adminlistener in file: /u01/app/oracle/admin/apex/devdomain1/apex/credentials
7. Updated the defaults.xml file
Added
<entry key="apex.security.user.roles">RESTful Services</entry>
<entry key="apex.security.developer.roles">OAuth2 Client Developer, SQL Developer</entry>
as per Oracle SQL Developer User's Guide Release 4.0
Changed
<entry key="debug.printDebugToScreen">false</entry>
to
<entry key="debug.printDebugToScreen">true</entry>
for RESTful debugging
Added
<entry key="security.verifySSL">false</entry>
to use OAuth2 in Non HTTPS Environment as per Oracle® REST Data Services Installation and Configuration Guide, Release 2.0
8. Deleted the Admin and Manager Roles within the apex application deployment which were part of the Apex Listener 1.1.3 install
9. Deployed the apex.war in weblogic
10. Stopped and started the weblogic server to which apex.war was deployed
11. In SQL Developer, View, RESTful Services. In the RESTful services windows hit connect, Create a new connection,
Connection Name DEV
Username adminlistener
selected http protocol
Hostname weblogicservername
Port 7250
Server Path /apex
Workspace (blank)
On the Authentication dialog
Username adminlistener
Password passwordsuppliedabove in step 6
Response is a dialog box titled Authentication Failed
message - Cannot connect to DEV. HTTP/1.1 403 Target service not allowed
NOTHING UNUSUAL IN ANY OF THE WEBLOGIC LOG FILES, EXCEPT THAT IT STATES
'Oracle REST Data Services version : 2.0.6.27.18.06' when I've installed 2.0.7.
Any help much appreciated

Further to the above post, I thought I'd simplify my Apex Listener install just to see if I can connect to it via SQL Developer
So downloaded the latest version 2.0.8 and decided to configure and run the Listener on my pc whilst still connecting to the same database.
Operating system : Window 7 Pro 64 bit
Oracle Apex Listener 2.0.8
Java(TM) SE Runtime Environment (build 1.7.0_25-b17)
Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode)
Went through the configuration as above, once started I tried again to access the listener via SQL Developer. This time I received this output from the listener:
INFO: Error: ORA-02291: integrity constraint (APEX_040200.WWV_FLOW_RT$APPROVALS_SGID_FK) violated - parent key not found, occurred during execution of: [CALL, insert into wwv_flow_rt$approvals (user_name,status,client_id,security_group_id,created_by,created_on,updated_by,updated_on) values(/*in:user_id*/?,/*in:status*/?,/*in:client_id*/?,/*in:tenant_id*/?,upper(/*in:user_id*/?),/*in:created*/?,upper(/*in:user_id*/?),/*in:created*/?), [tenant_id, in, class java.math.BigInteger], [client_id, in, class java.math.BigInteger], [user_id, in, class java.lang.String], [status, in, class oracle.dbtools.rt.oauth.ApprovalRequest$Status], [created, in, class java.sql.Timestamp]]with values: [adminlistener, APPROVED, 3858401374580004, -1, adminlistener, 2014-06-23 12:19:18.785, adminlistener, 2014-06-23 12:19:18.785]
SQL Developer responded with an Authentication Failed titled dialog with the following displayed in the body of the dialog
Cannot connect to DEV.
<!DOCTYPE html>





<html>

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1">
<style type="text/css" media="screen">html,body,div,span,h3,p,ol,ul,li,header,hgroup{margin:0;padding:0;border:0;font-size:100%;font:inherit;vertical-align:baseline}header,hgroup{display:block}body{font:normal 12px/16px Arial,sans-serif;margin:0 auto;background:#6a9cda}header#xHeader{border-bottom:1px solid #8fa4c0;position:relative;z-index:10;background:none #000}header#xHeader hgroup{width:974px;margin:0 auto;position:relative;height:36px;background:none #000}header#xHeader a#uLogo{margin:8px 0;display:inline-block;font:bold 14px/20px Arial,sans-serif;color:#AAA;text-decoration:none}header#xHeader a#uLogo span.logo{color:#F00}.no-css3 div#xContentContainer div.xContent{padding-top:14px}.no-css3 div#xContentContainer div.xContent div.xMainLeft h2{margin-top:0}div#xWhiteContentContainer{margin-bottom:30px}div#xWhiteContentContainer.xContentWide{background:#FFF;margin-bottom:0}div#xWhiteContentContainer.xContentWide div.xWhiteContent{-moz-border-radius:0;-webkit-border-radius:0;border-radius:0;-moz-box-shadow:none;-webkit-box-shadow:none;box-shadow:none}div#xWhiteContentContainer div.xWhiteContent{width:974px;margin:0 auto;padding:0 0 20px 0;background:#FFF;min-height:500px;-moz-border-radius:0 4px 4px 4px;-webkit-border-radius:0 4px 4px 4px;border-radius:0 4px 4px 4px;-moz-box-shadow:0 1px 2px rgba(0,0,0,0.15);-webkit-box-shadow:0 1px 2px rgba(0,0,0,0.15);box-shadow:0 1px 2px rgba(0,0,0,0.15)}div#xContentHeaderContainer{background:#6a9cda;-moz-box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset;-webkit-box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset;box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset}div#xContentHeaderContainer div.xContentHeader{width:974px;margin:0 auto;padding:30px 0 32px 0;position:relative;min-height:60px}div#xContentHeaderContainer div.xContentHeader h3{font:bold 24px/24px Arial,sans-serif;color:#fff;text-shadow:0 2px 1px rgba(0,0,0,0.25);margin:0 0 20px 0}div#xFooterContainer{min-height:200px;border-top:1px solid rgba(0,0,0,0.15);background:#6a9cda}body.errorPage div#xContentHeaderContainer div.xContentHeader{min-height:30px}body.errorPage div#xContentHeaderContainer div.xContentHeader h3{font:bold 30px/30px Arial,sans-serif;color:#FFF;text-shadow:0 1px 2px rgba(0,0,0,0.25);margin:0}div.errorPage p{font:normal 14px/20px Arial,sans-seri;color:#666;padding:0 0 10px 0}div.errorPage ul{list-style:disc outside;padding:0 10px 0;margin:0 0 20px 0}div.errorPage ul li{font:normal 12px/16px Arial,sans-serif;color:#666;margin:0 0 8px 10px}pre{font-family:Consolas,"Lucida Console","Courier New",Courier,monospace}
</style>
<script type="text/javascript" charset="utf-8">
'header hgroup'.replace(/\w+/g,
function(n) {
document.createElement(n)
</script>
<title>Internal Server Error</title>
</head>
<body class="errorPage">
<header id="xHeader">
<hgroup>
<a id="uLogo" href="./"><span class="logo">ORACLE</span>
REST DATA SERVICES</a>
</hgroup>
</header>
<div id="xContentHeaderContainer">
<div class="xContentHeader">
<h3>
<span class="statusCode">500</span> - <span
class="statusMessage">Internal Server Error</span>
</h3>
</div>
</div>
<div id="xWhiteContentContainer" class="xContentWide">
<div class="xWhiteContent">
<div class="errorPage">
<p>
<ul class="reasons">
</ul>
</p>
<p>
<pre>Request Path passes syntax validation
Mapping request to database pool: PoolMap [_failed=false, _lastUpdate=-1, _pattern=null, _poolName=apex, _regex=null, _type=REGEX, _workspaceIdentifier=null, _serviceName=null]
Applied database connection info
Attempting to process with PL/SQL Gateway
Not processed as PL/SQL Gateway request
Attempting to process as a RESTful Service
Choosing: oracle.dbtools.rt.oauth.TokenHandler as current candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=NONE], originsAllowed=[], corsEnabled=true]
Determining if request can be dispatched as a Tenanted RESTful Service
Request path has one path segment, continuing processing
No Tenant Principal established yet, continuing processing
APEX_LISTENER pool exists, continuing processing
No matching tenant found for: oauth2, cannot dispatch
Chose oracle.dbtools.rt.oauth.TokenHandler as the final candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=NONE], originsAllowed=[], corsEnabled=true] for: POST oauth2/token
oauth2/token authorized as: p6xycV-2QceFnFHkWyJlnA..
</pre>
</p>
<p>
<pre>WebException [statusCode=500]
at oracle.dbtools.rt.web.WebException.webException(WebException.java:343)
at oracle.dbtools.rt.web.WebException.internalError(WebException.java:262)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApproval(JDBCOAuthDataAccess.java:514)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApprovedRequest(JDBCOAuthDataAccess.java:181)
at oracle.dbtools.rt.oauth.OAuthAuthorization.resourceOwnerCredentials(OAuthAuthorization.java:654)
at oracle.dbtools.rt.oauth.OAuthAuthorization.tokenRequest(OAuthAuthorization.java:273)
at oracle.dbtools.rt.oauth.TokenHandler.post(TokenHandler.java:44)
at oracle.dbtools.rt.web.RequestHandler.response(RequestHandler.java:268)
at oracle.dbtools.rt.web.RequestHandler.dispatch(RequestHandler.java:361)
at oracle.dbtools.rt.web.RequestHandler.dispatch(RequestHandler.java:85)
at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:93)
at oracle.dbtools.rt.web.ETags.checkPrecondition(ETags.java:93)
at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:426)
at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:164)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.doFilter(ServletAdapter.java:1059)
at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.invokeFilterChain(ServletAdapter.java:999)
at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)
at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:91)
at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
at java.lang.Thread.run(Unknown Source)
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-02291: integrity constraint (APEX_040200.WWV_FLOW_RT$APPROVALS_SGID_FK) violated - parent key not found
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:208)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1046)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1336)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3713)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1378)
at sun.reflect.GeneratedMethodAccessor28.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:230)
at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
at com.sun.proxy.$Proxy44.execute(Unknown Source)
at oracle.dbtools.common.jdbc.JDBCInsert.execute(JDBCInsert.java:58)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApproval(JDBCOAuthDataAccess.java:487)
... 34 more
</pre>
</p>
</div>
</div>
</div>
<div id="xFooterContainer">
</div>
</body>
</html>
I am assuming this must be part of the problem I am seeing this the Weblogic deployment in my original post.
Does anyone have any suggestions on how best to tackle this?
Regards,
Derek

SQL Developer 4.0.0.13 and Oracle Cloud DB. Cart Access Issue (Unable to deploy in cloud).

Hello,
I asked for a trial account on 04/02 (this year) of the Oracle Cloud. I've been able to create a Cloud Connection in SQL Developer (I'm able to login with my oracle email with the "Service Instance URL"). I am able to see the 11 example tables (DEPT, EMP, and 9 DEMO_X tables).
My data:
SQL Developer 4.0.0.13
DataCenter: US Commercial 2 (US Commercial - Chicago). I'm settled in México, at this moment I don't remember to have selected some DataCenter, but I got that one.
Domain SFTP Host & Port: sftp.us2.cloud.oracle.com:22
Domain SFTP User Name: USdddddd (changed here for example reasons)
Service SFTP Host & Port: sftp.us2.cloud.oracle.com:22
Service SFTP User Name: USssssss (changed here for example reasons)
My problem. I cannot deploy on the cloud (via the Cart tool on SQL Developer).
In chat support, I was told to check this site (1) Data Loading and the Oracle Database Cloud Service. It seems the steps are the same of this site (2) that I was following before Creating and Deploying JSF/JPA Applications to Oracle Cloud.
My scenario is not according the tutorial. According to (1), the tutorial highlights the use of the user detailed as "Service SFTP User Name" (USssssss). The site says that if I click on that user, I should be able to reset its password on SFTP users. BUT, this user (USssssss, Service SFTP User Name) is NOT shown as it is explained, the user that is shown there is the one under "Domain SFTP information" (USdddddd, that is, the user that I should NOT use, according to that webpage).
My user Service SFTP User is not shown in Security-SFTP Users. When I click the user name (USssssss), the site takes you to the Security tab, and SFTP Users sub tab. I notice that my Service SFTP User Name (USssssss) appears in Security tab, but it appears under "Users" sub tab, NOT on "SFTP Users" sub tab. Also, if I try to reset the Service SFTP User password (in Users sub tab), the site says "Oracle Cloud will send an email with a temporary password to USssssss USssssss." It does not ask me to write the new password (SFTP Users sub tab works fine, asking me a password for USdddddd).
Anyway, in SQL Developer, I made several tests in the Cart, testing either the Service and also the Domain users, port 22 and 2222. None of them worked. The message I get is:
Unable to connect to sftp server with provided details.
I've also tried to access the sftp url with Putty, PSFTP, and Filezilla. From those three apps, the sftp url gives me timeout (either on port 22, or 2222). But if ping that url, I got a response back.
So I'm not sure where is the problem. Is it the url? Is it the port? Is it the Service SFTP User? All of them?
Any comment, is very welcome.
P.S. It will be nice to have a "posted date" for each tutorial and perhaps identify the Cloud version that is being explained (the Oracle cloud is growing fast, perhaps the tutorials will be deprecated soon).

Hi Gustavo,
It appears your Service SFTP user was not created correctly. Please contact support and mention the fact that your Service SFTP user appears on Security/Users tab and not on Security/SFTP Users tab.
Vlad

SQL Developer High Memory Consumption 3.2.20.09.87

Hello,
I have been using SQL developer for quite some time and had initially had problems in the past with high memory consuption when I use this tool.
I have received and applied advice from this forum and while it had helped a little, the majority of the high memory consuption remained an issue.
I finally got more time to dig around and try to specifically isolate where the problem seems to be coming from and here is what I found.
*1)* I have removed the Check for Updates feature
*2)* I have turned off many of the extensions except for DBA Navigator, Real Time SQL Monitoring, SearchBar and Snippet.
*3)* When I start a fresh SQL Developer Session and initiate a Oracle Connection the application consumes roughly 148 meg fo RAM
*4)* When I open my Windows Task Manager and watch the memory allocated to SQL Developer I notice it goes up when I move my mouse over the SQL Developer tool and When I run through menus at roughly 5k a second or so and the memory is never released back to the system.
*5)* When I run a Large SQL to the grid the memory jumps by about 100 meg or so and will continue to do so every time I repeat the SQL until SQL Developer consumes roughly 748 meg of RAM.
*6)* 748 Meg of RAM seems to be the number when SQL Developer (with one Oracle connection) no longer continues to consume more and then not return the memory to the system.
Is there a way to have SQL Developer automatically clear up it's active memory usage without closing it down and restarting it?
Why does SQL Developer continue to consume more and more memory just from moving your mouse over it and/or by navigating menus?
Here is my About Detail;
Oracle SQL Developer 3.2.20.09
Version 3.2.20.09
Build MAIN-09.87
Copyright © 2005, 2012 Oracle. All Rights Reserved.
IDE Version: 11.1.1.4.37.59.48
Product ID: oracle.sqldeveloper
Product Version: 11.2.0.09.87
Version
Component     Version
=========     =======
Java(TM) Platform     1.6.0_35
Oracle IDE     3.2.20.09.87
Properties
Name     Value
====     =====
awt.toolkit     sun.awt.windows.WToolkit
class.load.environment     oracle.ide.boot.IdeClassLoadEnvironment
class.load.log.level     CONFIG
class.transfer     delegate
file.encoding     Cp1252
file.encoding.pkg     sun.io
file.separator     \
ice.browser.forcegc     false
ice.pilots.html4.ignoreNonGenericFonts     true
ice.pilots.html4.tileOptThreshold     0
ide.AssertTracingDisabled     true
ide.bootstrap.start     109707460930968
ide.build     MAIN-09.87
ide.conf     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.config_pathname     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.debugbuild     false
ide.devbuild     false
ide.extension.search.path     sqldeveloper/extensions:jdev/extensions:ide/extensions
ide.firstrun     true
ide.java.minversion     1.6.0_04
ide.launcherProcessId     3276
ide.main.class     oracle.ide.boot.IdeLauncher
ide.patches.dir     ide/lib/patches
ide.pref.dir     C:\Users\twilliams\AppData\Roaming\SQL Developer
ide.pref.dir.base     C:\Users\twilliams\AppData\Roaming
ide.product     oracle.sqldeveloper
ide.shell.enableFileTypeAssociation     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloperW.exe
ide.splash.screen     splash.gif
ide.startingArg0     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloperW.exe
ide.startingcwd     C:\app\twilliams\product\11.2.0\client_3\SQLDEVELOPER\SQLDEVELOPER\BIN
ide.user.dir     C:\Users\twilliams\AppData\Roaming\SQL Developer
ide.user.dir.var     IDE_USER_DIR
ide.work.dir     C:\Users\twilliams\Documents\SQL Developer
ide.work.dir.base     C:\Users\twilliams\Documents
ilog.propagatesPropertyEditors     false
java.awt.graphicsenv     sun.awt.Win32GraphicsEnvironment
java.awt.printerjob     sun.awt.windows.WPrinterJob
java.class.path     ..\..\ide\lib\ide-boot.jar
java.class.version     50.0
java.endorsed.dirs     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\endorsed
java.ext.dirs     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\ext;C:\Windows\Sun\Java\lib\ext
java.home     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre
java.io.tmpdir     c:\Temp\
java.library.path     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\app\twilliams\product\11.2.0\client_3\bin;C:\app\twilliams\product\11.2.0\client_3;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Lenovo\Access Connections\;C:\Program Files\WinMerge;C:\Program Files\ThinkPad\Bluetooth Software\;.
java.naming.factory.initial     oracle.javatools.jndi.LocalInitialContextFactory
java.protocol.handler.pkgs     oracle.jdevimpl.handler
java.runtime.name     Java(TM) SE Runtime Environment
java.runtime.version     1.6.0_35-b10
java.specification.name     Java Platform API Specification
java.specification.vendor     Sun Microsystems Inc.
java.specification.version     1.6
java.util.logging.config.file     logging.conf
java.vendor     Sun Microsystems Inc.
java.vendor.url     http://java.sun.com/
java.vendor.url.bug     http://java.sun.com/cgi-bin/bugreport.cgi
java.version     1.6.0_35
java.vm.info     mixed mode
java.vm.name     Java HotSpot(TM) Client VM
java.vm.specification.name     Java Virtual Machine Specification
java.vm.specification.vendor     Sun Microsystems Inc.
java.vm.specification.version     1.0
java.vm.vendor     Sun Microsystems Inc.
java.vm.version     20.10-b01
jdbc.driver.home     /C:/app/twilliams/product/11.2.0/client_3/
jdbc.library     /C:/app/twilliams/product/11.2.0/client_3/jdbc/lib/ojdbc6.jar
line.separator     \r\n
oracle.home     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper
oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG     true
oracle.jdbc.mapDateToTimestamp     false
oracle.translated.locales     de,es,fr,it,ja,ko,pt_BR,zh_CN,zh_TW
oracle.xdkjava.compatibility.version     9.0.4
orai18n.library     /C:/app/twilliams/product/11.2.0/client_3/jlib/orai18n.jar
os.arch     x86
os.name     Windows 7
os.version     6.1
path.separator     ;
reserved_filenames     con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
sqldev.debug     false
sun.arch.data.model     32
sun.boot.class.path     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\resources.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\rt.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\sunrsasign.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\jsse.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\jce.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\charsets.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\modules\jdk.boot.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\classes
sun.boot.library.path     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\bin
sun.cpu.endian     little
sun.cpu.isalist     pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
sun.desktop     windows
sun.io.unicode.encoding     UnicodeLittle
sun.java2d.ddoffscreen     false
sun.jnu.encoding     Cp1252
sun.management.compiler     HotSpot Client Compiler
sun.os.patch.level     Service Pack 1
user.country     US
user.dir     C:\app\twilliams\product\11.2.0\client_3\SQLDEVELOPER\SQLDEVELOPER\BIN
user.home     C:\Users\twilliams
user.language     en
user.name     twilliams
user.timezone     America/Los_Angeles
user.variant
windows.shell.font.languages
Extensions
Name     Identifier     Version     Status
====     ==========     =======     ======
Check For Updates     oracle.ide.webupdate     11.1.1.4.37.59.48     Loaded
Code Editor     oracle.ide.ceditor     11.1.1.4.37.59.48     Loaded
Component Palette     oracle.ide.palette1     11.1.1.4.37.59.48     Loaded
Data Miner     oracle.dmt.dataminer     11.2.1.1.09.87     Disabled by user
Database Connection Support     oracle.jdeveloper.db.connection     11.1.1.4.37.59.48     Loaded
Database Object Explorers     oracle.ide.db.explorer     11.1.1.4.37.59.48     Loaded
Database UI     oracle.ide.db     11.1.1.4.37.59.48     Loaded
Diagram Framework     oracle.diagram     11.1.1.4.37.59.48     Loaded
Diagram Javadoc Extension     oracle.diagram.javadoc     11.1.1.4.37.59.48     Loaded
Diagram Thumbnail     oracle.diagram.thumbnail     11.1.1.4.37.59.48     Loaded
Diff/Merge     oracle.ide.diffmerge     11.1.1.4.37.59.48     Loaded
Extended IDE Platform     oracle.javacore     11.1.1.4.37.59.48     Loaded
External Tools     oracle.ide.externaltools     11.1.1.4.37.59.48     Loaded
File Support     oracle.ide.files     11.1.1.4.37.59.48     Loaded
Help System     oracle.ide.help     11.1.1.4.37.59.48     Loaded
History Support     oracle.jdeveloper.history     11.1.1.4.37.59.48     Loaded
Import/Export Support     oracle.ide.importexport     11.1.1.4.37.59.48     Loaded
Index Migrator support     oracle.ideimpl.indexing-migrator     11.1.1.4.37.59.48     Loaded
JDeveloper Runner     oracle.jdeveloper.runner     11.1.1.4.37.59.48     Loaded
JViews Registration Addin     oracle.diagram.registration     11.1.1.4.37.59.48     Loaded
Log Window     oracle.ide.log     11.1.1.4.37.59.48     Loaded
Mac OS X Adapter     oracle.ideimpl.apple     11.1.1.4.37.59.48     Loaded
Navigator     oracle.ide.navigator     11.1.1.4.37.59.48     Loaded
Object Gallery     oracle.ide.gallery     11.1.1.4.37.59.48     Loaded
Oracle IDE     oracle.ide     11.1.1.4.37.59.48     Loaded
Oracle SQL Developer     oracle.sqldeveloper     11.2.0.09.87     Loaded
Oracle SQL Developer - 3rd Party Database Browsers     oracle.sqldeveloper.thirdparty.browsers     11.2.0.09.87     Loaded
Oracle SQL Developer - APEX Listener Administration     oracle.sqldeveloper.listener     11.2.0.09.87     Loaded
Oracle SQL Developer - Change Mangement     oracle.sqldeveloper.em_cm     11.2.0.09.87     Loaded
Oracle SQL Developer - DBA Navigator     oracle.sqldeveloper.dbanavigator     11.2.0.09.87     Loaded
Oracle SQL Developer - Database Cart     oracle.sqldeveloper.dbcart     11.2.0.09.87     Loaded
Oracle SQL Developer - Extras     oracle.sqldeveloper.extras     11.2.0.09.87     Loaded
Oracle SQL Developer - File Navigator     oracle.sqldeveloper.filenavigator     11.2.0.09.87     Loaded
Oracle SQL Developer - Migrations Antlr3 Translator     oracle.sqldeveloper.migration.translation.core_antlr3     11.2.0.09.87     Missing dependencies: oracle.sqldeveloper.migration
Oracle SQL Developer - Migrations Application Migration     oracle.sqldeveloper.migration.application     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations Core     oracle.sqldeveloper.migration     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations DB2     oracle.sqldeveloper.migration.db2     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations DB2 Translator     oracle.sqldeveloper.migration.translation.db2     11.2.0.09.87     Missing dependencies: oracle.sqldeveloper.migration, oracle.sqldeveloper.migration.translation.core_antlr3
Oracle SQL Developer - Migrations Microsoft Access     oracle.sqldeveloper.migration.msaccess     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations Microsoft SQL Server     oracle.sqldeveloper.migration.sqlserver     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations MySQL     oracle.sqldeveloper.migration.mysql     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations Sybase Adaptive Server     oracle.sqldeveloper.migration.sybase     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations T-SQL Translator     oracle.sqldeveloper.migration.translation.core     11.2.0.09.87     Missing dependencies: oracle.sqldeveloper.migration
Oracle SQL Developer - Migrations Teradata     oracle.sqldeveloper.migration.teradata     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations Teradata SQL Translator     oracle.sqldeveloper.migration.translation.teradata_translator     11.2.0.09.87     Missing dependencies: oracle.sqldeveloper.migration, oracle.sqldeveloper.migration.translation.core
Oracle SQL Developer - Migrations Translation UI     oracle.sqldeveloper.migration.translation.gui     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Object Viewer     oracle.sqldeveloper.oviewer     11.2.0.09.87     Loaded
Oracle SQL Developer - Real Time SQL Monitoring     oracle.sqldeveloper.sqlmonitor     11.2.0.09.87     Loaded
Oracle SQL Developer - Reports     oracle.sqldeveloper.report     11.2.0.09.87     Loaded
Oracle SQL Developer - Scheduler     oracle.sqldeveloper.scheduler     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Schema Browser     oracle.sqldeveloper.schemabrowser     11.2.0.09.87     Loaded
Oracle SQL Developer - SearchBar     oracle.sqldeveloper.searchbar     11.2.0.09.87     Loaded
Oracle SQL Developer - Security     oracle.sqldeveloper.security     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Snippet     oracle.sqldeveloper.snippet     11.2.0.09.87     Loaded
Oracle SQL Developer - Spatial     oracle.sqldeveloper.spatial     11.2.0.09.87     Disabled by user
Oracle SQL Developer - TimesTen     oracle.sqldeveloper.timesten     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Tuning     oracle.sqldeveloper.tuning     11.2.0.09.87     Loaded
Oracle SQL Developer - Unit Test     oracle.sqldeveloper.unit_test     11.2.0.09.87     Disabled by user
Oracle SQL Developer - User Extensions Support     oracle.sqldeveloper.userextensions     11.2.0.09.87     Loaded
Oracle SQL Developer - Worksheet v2     oracle.sqldeveloper.worksheet     11.2.0.09.87     Loaded
Oracle SQL Developer - XML Schema     oracle.sqldeveloper.xmlschema     11.2.0.09.87     Loaded
Oracle SQL Developer Data Modeler     oracle.datamodeler     3.1.4.710     Disabled by user
Oracle SQL Developer Data Modeler - Reports     oracle.sqldeveloper.datamodeler_reports     11.2.0.09.87     Disabled by user
PROBE Debugger     oracle.jdeveloper.db.debug.probe     11.1.1.4.37.59.48     Loaded
Peek     oracle.ide.peek     11.1.1.4.37.59.48     Loaded
Persistent Storage     oracle.ide.persistence     11.1.1.4.37.59.48     Loaded
Property Inspector     oracle.ide.inspector     11.1.1.4.37.59.48     Loaded
QuickDiff     oracle.ide.quickdiff     11.1.1.4.37.59.48     Loaded
Replace With     oracle.ide.replace     11.1.1.4.37.59.48     Loaded
Runner     oracle.ide.runner     11.1.1.4.37.59.48     Loaded
VHV     oracle.ide.vhv     11.1.1.4.37.59.48     Loaded
Versioning Support     oracle.jdeveloper.vcs     11.1.1.4.37.59.48     Disabled by user
Versioning Support for Subversion     oracle.jdeveloper.subversion     11.1.1.4.37.59.48     Missing dependencies: oracle.jdeveloper.vcs
Virtual File System     oracle.ide.vfs     11.1.1.4.37.59.48     Loaded
Web Browser and Proxy     oracle.ide.webbrowser     11.1.1.4.37.59.48     Loaded
XML Editing Framework IDE Extension     oracle.ide.xmlef     11.1.1.4.37.59.48     Loaded
audit     oracle.ide.audit     11.1.1.4.37.59.48     Loaded
classpath: protocol handler extension     oracle.jdeveloper.classpath     11.1.1.0.0     Loaded
jdukshare     oracle.bm.jdukshare     11.1.1.4.37.59.48     Loaded
mof-xmi     oracle.mof.xmi     11.1.1.4.37.59.48     Loaded
oracle.ide.dependency     oracle.ide.dependency     11.1.1.4.37.59.48     Loaded
oracle.ide.indexing     oracle.ide.indexing     11.1.1.4.37.59.48     Loaded
palette2     oracle.ide.palette2     11.1.1.4.37.59.48     Loaded
status     oracle.ide.status     11.1.1.4.37.59.48     Loaded
Thanks in advance...
Tom
Edited by: ERPDude on Feb 28, 2013 2:46 PM

Aces!!! You nailed it Gary...
Thank you.
I applied fixed noted in Re: Reduce SQLDeveloper memory footprint with JDK 1.7
For others, to summarize my changes.
product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
AddVMOption -XX:+UnlockExperimentalVMOptions
AddVMOption -XX:+UseG1GC
AddVMOption -XX:MaxGCPauseMillis=50
AddVMOption -XX:GCPauseIntervalMillis=200
AddVMOption -XX:MaxPermSize=128M
AddVMOption -Xms50M
AddVMOption -Xmx384M
AddVMOption -XX:MinHeapFreeRatio=10
AddVMOption -XX:MaxHeapFreeRatio=10
product\11.2.0\client_3\sqldeveloper\ide\bin\ide.conf
comment the following two lines as shown below
#AddVMOption -Xmx640M
#AddVMOption -Xms128M
Now SQL Developer runs at roughly 500 meg.
I guess the only thing I have left to ask others reviewing this would be if there is a way to get these memory values down without having much adverse impacts on SQL Developer based on newer JVM switches/functionalities.
The posts that drove these changes are old from a technologoical perspective :) 2010.
Tom

File Open/Save Boxes of SQL- Developer

I am not aware if these points are already discussed or on features list.
1) I could not find how to set default directory where SQL Developer will go directly when I am opening new file.
2. Also as far as I experienced SQL Developer does not remember the last path/directory I have opened file from.
3. I don't know difference between File Menu -> open and right click in the worksheet and open.
But the files opened via right click does not go to recently used file list in the file menu. Is this expected?
4. When I export the data to file. there are two points.
     a) Last path is not remembered so I have to go to the path every time.
     b) SQL Developer comes with the name null.csv
     The practical problem I face is after I go to whatever path I need I give some file name. But if I don’t give the extension then no extension is there to the file it created. I think most will expect to have automatic extension. I don’t know if I am expecting too much.
Regards
Sanjeev

Hi,
1. Lots of Windows users who are craving for this, let's hope it gets into v1.1. Perhaps the default script directory (accepted for v1.1) can be used.
2. They claim it does, however only for the same opened tab. Duh.
3. Might be intentional, but I agree it should be added.
4. a) Bummer, isn't it?
b) I agree. Suppose it's like this because of the multi-platform capability.
If you notice missing features or want to vote on other people's requests, there's the SQL Developer Exchange, at http://sqldeveloper.oracle.com .
Have fun,
K.

Explain plan results are different in SQL Developer than SQL Plus

My Environment:
SQL Developer 1.0.0.15.27
Platform where SQL Developer is running: Windows XP 2002 SP2
Oracle Database and Client 9.2.0.7
Optimizer_mode: FIRST_ROWS
I have the following SQL statement:
SELECT a1.comp_id
FROM temp_au_company a0, au_company a1
WHERE :b2 = a0.temp_emp_code
AND a0.comp_id = a1.comp_id
AND a0.sls_terr_code != a1.sls_terr_code
AND a1.last_mdfy_date > :b1
When I run an Explain in SQL Developer I get the following access path (which is the one I really want):
SELECT STATEMENT TABLE ACCESS(BY INDEX ROWID) FEDLINK.AU_COMPANY NESTED LOOPS INDEX(RANGE SCAN)
FEDLINK.UX2_TEMP_AU_COMPANY
INDEX(RANGE SCAN) FEDLINK.PX1_COMPANY
However, when I execute the statement with sql_trace turned on and use tkprof to generate the actual access path, the statement executes as follows (which is WAY more expensive):
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 3.58 6.68 28136 29232 0 0
total 3 3.58 6.69 28136 29232 0 0
Misses in library cache during parse: 1
Optimizer goal: FIRST_ROWS
Parsing user id: 979 (FEDLINK) (recursive depth: 1)
Rows Row Source Operation
0 NESTED LOOPS
0 TABLE ACCESS FULL AU_COMPANY
0 INDEX RANGE SCAN UX2_TEMP_AU_COMPANY (object id 49783)
Notice the FULL access of au_company.
I understand that SQL Developer has nothing to do with why the statement executed the way it did, but why is the Explain in SQL Developer different than the actual execution plan?
Added note....when I run the explain in SQL Plus it is the same as the actual execution. Here is the explain from SQL Plus:
explain plan for SELECT a1.comp_id
FROM temp_au_company a0, au_company a1
WHERE '1' = a0.temp_emp_code
AND a0.comp_id = a1.comp_id
AND a0.sls_terr_code != a1.sls_terr_code
AND a1.last_mdfy_date > '01-MAY-2006';
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 2 | 76 | 2597 |
| 1 | NESTED LOOPS | | 2 | 76 | 2597 |
| 2 | TABLE ACCESS FULL | AU_COMPANY | 2 | 42 | 2595 |
| 3 | INDEX RANGE SCAN | UX2_TEMP_AU_COMPANY | 1 | 17 | 2
Thanks,
Brenda

The explain is different (full scan of au_company in SQL Plus / index access in SQL Developer) even when I use variables in SQL Plus. Here is the output for SQL Plus using variables instead of literals:
SQL> variable b1 varchar2
SQL> variable b2 char
SQL> explain plan for SELECT a1.comp_id
2 FROM temp_au_company a0, au_company a1
3 WHERE :b2 = a0.temp_emp_code
4 AND a0.comp_id = a1.comp_id
5 AND a0.sls_terr_code != a1.sls_terr_code
6 AND a1.last_mdfy_date > :b1
7 /
Explained.
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 3184 | 118K| 2995 |
| 1 | HASH JOIN | | 3184 | 118K| 2995 |
| 2 | INDEX RANGE SCAN | UX2_TEMP_AU_COMPANY | 3187 | 54179 | 3 |
| 3 | TABLE ACCESS FULL | AU_COMPANY | 24009 | 492K| 2983 |
Any other ideas? They should be the same.
Brenda

Apex Listener 2.0.1 vs Sql Developer Administration 3.2.20.09 bugs

Apex Listener 2.0.1 / Sql Developer 3.2.20.09 / Apex 4.1.1
1. I'm using basic connection type with service name. Each time I connect to listener administration it is resetted to SID with default name as orcl.
2. Test Settings does not work in case hostname is localhost.
Database Settings apex:Cannot connect to APEX_PUBLIC_USER. Исключение ввода/вывода (input/output exception): The Network Adapter could not establish the connection>
At the same time it's working in defaults.xml:
<entry key="db.hostname">localhost</entry>I'm not sure why. Database and Apex Listener are installed on the same mashine. May be this can help:
<Warning> <Server> <x> <> <DynamicListenThread[Default]> <<WLS Kernel>> <> <> <> <BEA-002611> <Hostname "x", maps to multiple IP addresses: 10.110.x.x, 0:0:0:0:0:0:0:1> 3. I can see "Enable RESTful Services" action in (url http://docs.oracle.com/cd/E35137_01/appdev.32/e35117/intro.htm#autoId110)SQL Developer User's Guide. Still there is no such action in Sql Developer. Thus settings are always uploaded with enabled RESTful Services.
I see error
The pool named: apex_al does not existeach time I connect to Apex Listener Administration in case of RESTful Services is not configured during configuration of apex.war.
I can't find any restrictions for RESTful Services to be configured. So I think this error is unnecessary.
4. From sql developer User's Guide
Connect (context menu only): Connects to the Application Express Listener (see Connecting to Application Express Listener Server).Retrieve Settings, Upload Settings, and Launch URL are enabled when you connect to the Application Express Listener.>
administration settings are retrieved and displayed but still Retrieve Settings, Upload Settings, and Launch URL are disabled in context menu after connection.
I need to perform New Administration action to make them enabled.
Is this expected behavior ?
Is this all bugs or known features ?
Regards,
Igor

DB: V11.2
APEX V 4.2.3.00.08
APEX Listener: V2.0.5.287.04.27
SQLDeveloper: Version 3.2.20.09
OS WIndows 7 64 bit
I am trying to create a connection to a standalone Apex Listener installation via SQL Developer to manage the listener settings. I start a new connection and after entering the UN/PWD of the Listener Administrator I get the following error:
Authentication failed
"CANNOT CONNECT TO CONNECTION.
INVALID RESOURCE OWNER CREDENTIALS"
In the Standalone APEX Listener DOS window I'm getting the following error message:
SEVERE: The pool named: apex_al does not exist
So where do I even start to trouble shoot this???
I add a connection as follows:
Connection Name: Connection
Usename: adminlistener (pwd=adminlistener configured using command :java -jar apex.war user adminlistener "Listener Administrator")
HTTP radio button
Hostname: localhost
Port: 8080
Server Path: /apex
thanks in advance
Paul Platt

Unable to see the file share content via UNC path

I have run a cmd command to modify the NTFS permissions on a few home directories.
That command has helped me to remove all from the ACL of shared folders; and add domain admins into it.
I am an admin on that Windows server. Now, whenever I try to access any home directory via UNC path; it doesn't displays the files and folders in it. But, if I go to the server and try to open the particular home directory from there...first it gives me
a prompt that I currently do not have access on folder and then gives me an option to click on continue and then I can access the files and folders within the directory.
I am also able to see the files and folders in the directory via UNC path after doing the above steps.
Can somebody help me understand what I did wrong here and how can this be resolved now?

Sorry, am added into local administratir group. But, NTFS permissions shows that I have only "read" and "change" permissions (I have checked this from effective permissions).
The ACL of folder shows only "Domain Admins" have full access and I am not a part of AD group "Domain Admins". I think this is the root cause of the issue.
I am running below mentioned command to give myself full access on the file shares without making any changes to the current ACL of all shared folders. However, it is not working and not even throwing any error message.
for /f %i in (u:\users.txt) do cacls \\hdfile01\users$\%i /C /G "AMadm":F
users.txt contains 'cn'. Another thing to notice here is that if I just keep one ID in .txt file and then run my command; it is working. But its not running for all users in loop.
Can somebody please help.

Sql Developer 1.5.5 bug with large sequence start values.

We have a small table in our sql server 2005 schema (~700) rows. Its primary key is a bigint. We randomly generate ids for this table (don't ask). We have ids for this table which are larger than 2147483647. (java.lang.Integer.MAX_VALUE). I'm using a Windows 10g instance as the repository:
SQL> select * from v$version
2 ;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Capturing this model works fine.
Converting this model works fine.
When the converted model is "Generated", Sql Developer stops generating the script before the worksheet window is opened with the generated sql. If run from sqldeveloper/bin, this exception is output to the console:
java.lang.Exception: java.util.NoSuchElementException
at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.start(AbstractMigrationProgressRunnable.java:141)
at oracle.dbtools.migration.workbench.core.GenerateInitiator.launch(GenerateInitiator.java:42)
at oracle.dbtools.raptor.controls.sqldialog.ObjectActionController.handleEvent(ObjectActionController.java:149)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:524)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:855)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:496)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1225)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1266)
at java.awt.Component.processMouseEvent(Component.java:6134)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
at java.awt.Component.processEvent(Component.java:5899)
at java.awt.Container.processEvent(Container.java:2023)
at java.awt.Component.dispatchEventImpl(Component.java:4501)
at java.awt.Container.dispatchEventImpl(Container.java:2081)
at java.awt.Component.dispatchEvent(Component.java:4331)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4301)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3965)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3895)
at java.awt.Container.dispatchEventImpl(Container.java:2067)
at java.awt.Window.dispatchEventImpl(Window.java:2458)
at java.awt.Component.dispatchEvent(Component.java:4331)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.util.NoSuchElementException
at oracle.dbtools.metadata.persistence.PersistableObjectIterator.next(PersistableObjectIterator.java:131)
at oracle.dbtools.migration.generate.GenerateWorker.generateSequences(GenerateWorker.java:862)
at oracle.dbtools.migration.generate.GenerateWorker.generateIndividualSchema(GenerateWorker.java:456)
at oracle.dbtools.migration.generate.GenerateWorker.generateSchema(GenerateWorker.java:365)
at oracle.dbtools.migration.generate.GenerateWorker.runGenerate(GenerateWorker.java:220)
at oracle.dbtools.migration.workbench.core.ui.GenerateRunner.doWork(GenerateRunner.java:71)
at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.run(AbstractMigrationProgressRunnable.java:161)
at oracle.dbtools.migration.workbench.core.ui.MigrationProgressBar.run(MigrationProgressBar.java:569)
at java.lang.Thread.run(Thread.java:619)
A problem row can be viewed by issuing this query against the repository:
select * from md_sequences where seq_start > 2147483647;
We have one row returned. The oracle.dbtools.metadata.persistence.MdSequence class uses a java.lang.Integer value to store the start value for the sequence. The value stored in the repository's MD_SEQUENCE table overflows the Integer type.
Updating the SEQ_START column in the MD_SEQUENCE table fixed our problem. (Well, I can now generate the schema. I may have other problems with the sequence being off).
I've written this post to save someone else the day it took me to diagnose this problem with Sql Developer 1.5.5. At the very least Sql Developer should inform the user that it could not generate the script because of the large sequence start value. It basically swallows any error and terminates script generation without any type of feedback.

Update: I was able to recreate the problem!
1. Create a new table (I used TEST).
2. Mark first column af primary key.
3. Save the table.
Notice the name of the primary key index created: (TEST_PK in my case)
4. Edit the table.
5. Under constraints change the name of the primary key constraint.
6. Save the table.
Notice that the index still has its original name.
7. Edit the table.
8. Change something.
9. Attempt to save changes (Fails).
Conclusion:
Either SQL Developer should be aware of indexes with different name than a constraint,
or when SQL Developer changes the name of a constraint with an index, both the constraint and the index should be renamed.

SQL Developer User Information Directory, supported UNC path??

Similar Messages

Maybe you are looking for