SQL edit window lost?

Hi,
I seem to have lost my SQL edit window and for some reason I cannot find any mention of how to reopen it in the help either. Can someone give me a hint?
Thanks!
neemeca

Just go up to the top and click on the little SQL icon that has a little down arrow next to it, or you can right click on a database connection and disconnect, then reconnect. The default behavior is to open up a sql edit window when you connect.
If you're on windows alt+F10 works too.
Alternatively you can choose "SQL Worksheet" from the tools menu.

Similar Messages

Need to revert to previous non-icloud ical -- new Delete button in Edit window is a problem.

Does anyone know how to revert to a previous version of iCal?
The new 5.0.3 iCal update is giving me huge problems.
When editing events, sometimes a delete button appears in the bottom right corner of the Edit window. Reflexivly, I click the small button, which I don't realize until it's too late, had changed to a 'delete' button. The new event is gone; there is no undo available.
I lost several appointments until I realized what was happening. I have lost new appointment with all the details I'd entered since.
Realize that this is just an opinion, but it is unfathomable why the UI change after all this time. There seems to be no good reason for having a delete button sometimes appear on the edit window.
Another change that is driving me crazy is that the Edit window open and close shortcuts were both command-E. Now, the commands have changed.
Please help! This is driving me crazy. I use iCal dozens of times a day. The new changes are not making me happy.
Thanks.

Hi flamechaser,
Welcome to the HP Forums.
I see that you are having some issue's when attempting to scan to the computer.
I do have a few suggestions we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with communication issues between the computer and printer. Please click on the following link for a Windows Error: 'No HP devices have been detected. HP Solution Center will now close.'
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Photos not showing in the edit window

iPhoto 11. 9.4.3
Images in the library appear ok in the filmstrip, but no longer appear in the edit window above.
This was working fine yesterday.
I have quit and restarted iPhoto twice to no avail.

What does appear in the edit window? What appears when you just double click on a thumbnail to view it in the larger mode?
Give this a go: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Where's the SQL*Plus Windows GUI?

Is the SQL*Plus Windows GUI included in XE?

Thanks, SQL Developer is perfect. It's strange that SQL Developer isn't bundled with Express Edition. SQL*Plus reminds me of Yazoo, big hair and the 1980's.
Interestingly SQL Developer seems to be very similar to DBVisualizer. Do you know if that's an accident or did Oracle white label DBVisualizer perhaps?

Size of edit window

I was replying to a post and noted the edit window scrolling left to right. I checked my screen resolution and noted that my children had lowered it to 1024x768 from my usual 1280x1024.
Why doesn't the edit window scale itself to the screen resolution? Either that or make it less wide to accomodate the not so small size of 1024x768 for those users whose eyes are not what they used to be.
Does this happen to anyone else, or am I alone in my experience?
hopper

Hi there
shunithD wrote:
We all accept that... but, as 'Moderators' you could:
1/ Raise your voices and complain to Adobe about the situation
What makes you think we haven't? There are other channels than what you see here you know.
shunithD wrote:
2/ Resign / threaten to resign your moderatorship until it's fixed
I've been part of support forums for longer than I care to remember. I see it as I do the software I use. Sure, there are spots that drive me crazy. But it's what we have for the moment. I'm not going to stop helping my fellow users just because of the forum issues. But I guess that translates to being an Adobe apologist in your eyes.
shunithD wrote:
3/ Take a more proactive stand instead of being apologists and banning the more vociferous protesters - who anyway seem to complain only here and not in the product forums. BTW has anyone noticed this point?
Again, I've never banned anyone. Only Adobe can actually do that. And even then, it happens only after folks recommend someone be banned. I've not done that either. And again, I do recognize that you were generic with the comment and said "moderators" and not just me. As for the complaints being here, well, this IS the forum comments area. So if you are upset with the forums, isn't this the place to express that? Mind you I do feel that some are abusive with the expressions.
I've made no efforts to cover the fact that to me, the Jive forums are an improvement overall when compared to the FuseTalk forums I experienced before. So unlike many here, I come from a totally different frame of reference. It doesn't mean I think the Jive forums are as good as they should be and that they don't have issues, but they are better than what my software product areas had before.
Cheers... Rick

When I access the address book, how can I copy an address without having to open the person's info in the edit window?

When I find a person's address in the address book and highlight their name in one pane, in the lower pane their info shows up. Unfortunately, highlighting the information I want is disabled. So, I open their info in the edit window, and then click on the appropriate tab.
Getting a single piece of information is not so inconvenient, but when you're putting together lists it is rather onerous to do it that way.
Being able to highlight and copy off the address book panes would be cool. Thanks

In an earlier communication, I had said that this was possible, at least with TB on Windows, but I realize now that it's only possible when a certain add-on is enabled: [https://freeshell.de//~kaosmos/morecols-en.html MoreFunctionsForAddressBook]
http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html
Install the add-on, and see if you can now highlight info in the Contact Pane by dragging the cursor. Ctrl-C (or the Mac equivalent) to copy the highlighted text to the clipboard.
You may notice that right-clicking an address in the Contact Pane now shows a Copy command, but a bug in the add-on prevents this option from being active.

Open Dialog Box: full file name is not displayed in edit window under Windows 7

Only the last 16 characters of a file name are displayed in the edit window of a Common dialog box under Windows 7. What is the fix to this problem? I am coding in C/C++ and my compiler is Visual Studio 2005.

Hi warengharding624,
Based on your description, your issue is related about C/C++, since this forum is discussing about Windows Forms Controls, and I will move this thread to C++ forum.
In addition,Could you share us what the type of your project is?
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

View in edit window not getting updatet properly

Hello
I have some problems with the view in the edit window not getting updatet correctly. I noticed this in spectral view. For example, when I zoom in very much, so I only see about 3 seconds of audio and then select one second of audio and do a time stretch, so it will be two seconds of length, the windows does not update properly.
Normally the audio behind the strechted selection should move backwards, but often the strechted portion just sort of overlaps it and it doesn't move. When I zoom out and then back in, it seems to be ok.
I also have had very weird behavior when trying to remove clicks, with the view also getting pretty messed up.
Does anyone have similar problems with the view not getting updated properly?
I am running german windows xp, audition is installed in english. I first thought that installing it in english instead of german solves the problems, but unfortunately it didn't.
Greetings

Hello again
I made a movie of this behavior:
https://share.ols.inode.at/4NNYXR4HT2CJI5IHY273R9NRHRW9OLGR95Q7VTOP
It shouldn't look like that, right?
Greetings

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

BREAK not working in SQL+ for windows. Works in SQL+ in DOS

I'm writing a simple query in SQL+
SELECT table_name, column_name
FROM user_tab_columns
WHERE table_name like 'MYTAB%'I first set BREAK ON table_name
then I run my query.
I expect the table name to be shown once, per table, not once per column.
If I run this query in SQL+ in a DOS window, that's exactly what happens.
If I run the same thing in SQL+ for Windows (version 10 on an 11g db) the break command appears to be ignored.
Any ideas ??
Thanks folks.

Not sure but maybe try the NODUPLICATES option.
break on table_name noduplicates

How to show photos at 100% size in the Edit window?

Background: I am using iWeb 1.1.1 to re-make my .Mac Homepage website; I love this newer, more flexible application and I love using iPhoto 6.0.4 with it.
My iPhoto 6.0.4 question:
How can I get the photos to show in their maximum size in the Edit box? There are some photos that I want to show as large as possible or even enlarge, and when the photos show at smaller than their exposed size, I feel disadvantaged.
I welcome any advice you send. I am feeling a bad crunch right now because my graphics program of choice, Photoshop Elements 2, is not opening up for me (It's been stopping at the point where the message says: "Photoshop is not sending any personal information") and I cannot find the CD right now. It's here somewhere but...........
— Lorna in Southern California

I welcome any advice you send. I am feeling a bad
crunch right now because my graphics program of
choice, Photoshop Elements 2, is not opening up for
me (It's been stopping at the point where the message
says: "Photoshop is not sending any personal
information") and I cannot find the CD right now.
It's here somewhere but.........
This is very easy to fix. There are many threads
here, at the Adobe forum and in any forum where PE is
mentioned. Quit PE, then take your computer totally
offline (unplug the ethernet cable, shut down airport
if that's what you use). Now launch PE, then go to
Preferences>Adobe Online and set Check for Updates to
Never. There never were any, never will be now for PE
2, so you won't miss anything.
Barbara..... if there never were any updates to PE2 and never will be any, then why would I need to disallow updates?
BTW, I discovered how to get the picture to show up full size. iPhoto 6 is different than iPhoto 4, and while experimenting with some edits I discovered the Small Head — Big Head toggle bar in the Edit Window, and that was my answer.
— Lorna in Southern California

Can't Open All Photos in Edit Window?

Today I've finished editing and putting together a "Slideshow" for a professional project. Then, when I opened another "Album" and tried to simply edit a photo, the photos from that album and my other albums (except for the album with the photos of the Slideshow) wouldn't open in the editing window.
Help? Please.

I have used Safari, Firefox and IE (latest version of each). I think (however) that I figured out what the bug is. I copied an address out of the address line in my browser and pasted it onto a web page. I then set it up as a hyperlink and clicked the "Open link in new window" box. However, this does not work.
I had to type the name of the site I was linking to, then link the word to the site and everything works fine.
Strange but that is how it worked out.

SQL Server Windows NT - 64 Bit in Windows Server 2012 R2 Standard

Hi,
We have started migrating our SQL Server 2005 version and Operating System 2003 to SQL Server 2012 and operating system 2012 R2 Standard.
Before we restore the production database, we had created an empty database and tables. We ran couple of packages which were migrated to SSIS 2012 version from SSIS 2005 and those were working fine and we saw good performance compare to production server.
Recently we have taken 2005 SQL Server database backup and restored on 2012 version. Since then we are facing performance issues on 2012 server. Below is the configuration of 2012 server
Intel(R) Xenon(R) CPU E5-2650 v2 @2.60 GHZ 2.60 GHZ (2 processors), RAM - 32 GM and 64-Bit Operating System.
We are using this server only for data loading from SSIS packages. We have set that this server to use MAX memory is 25 GB RAM. We have checked the memory usage of the server and seen SQL Server Windows NT - 64 bit process is taking total memory allotted
and also taking 100% CPU utilization.
Old Server Configuration is
Intel(R) Xenon(TM) MP CPU 3.66 GHZ, RAM - 8 GB and 32-Bit Operating System
Could you please let us know what was causing for the high memory utilization on our migration server and make the server for better performance?
Attached the image of memory utilization.

Hello,
I would start by setting maxdop (max degree of parallelism) properly:
http://blogs.msdn.com/b/sqlsakthi/p/maxdop-calculator-sqlserver.aspx
Rebuilding indexes and statistics too.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Web Intelligence in edit window i receive error when i try to save as excel

When I edit Web Intelligence report and want to save it as excel/pdf or CSV I receive error u201CWeb Intelligence Servlet error: Get%3ANoWebIServerfoundforthissessionIDu201D
Address that I receive from application is
"https://wpr06.tp.gk.corp.tepenet/AnalyticalReporting/Webi/cdzServlet?getBlob&BlobID=TMP253&SessionID=wpr05:6400@6536561JLelNym3xRUY0FYn6536560J4ghiQpa9dS6ZB5z&CdzSession=wpr05:6400@6536561JLelNym3xRUY0FYn6536560J4ghiQpa9dS6ZB5z,WPR02.Serwer%20raportĂłw%20Web%20Intelligence%2001,AeDiT.66gWxKnz6L2YV_0pA,wpr05:6400,@WPRBIS,osca:iiop://wpr05:6400;SI_SESSIONID=6536560J4ghiQpa9dS6ZB5z&DocumentToken=&SessionID=wpr05:6400@6536561JLelNym3xRUY0FYn6536560J4ghiQpa9dS6ZB5z&CdzSession=wpr05:6400@6536561JLelNym3xRUY0FYn6536560J4ghiQpa9dS6ZB5z,WPR02.Serwer%20raportĂłw%20Web%20Intelligence%2001,AeDiT.66gWxKnz6L2YV_0pA,wpr05:6400,@WPRBIS,osca:iiop://wpr05:6400;SI_SESSIONID=6536560J4ghiQpa9dS6ZB5z&DocumentName=Pozyskanie.xls"
If I change https to http I receive file. Or Business Object server have set ssl in Tomcat but we havenu2019t got set ssl in business object cms server. We want only to have ssl communication on our page but not in fat client Desktop Intelligence.
The same function but not in edit windows work properly.
We got Business Object R3.1 SP2.07

SSL just on Tomcat (Client Browser to Tomcat implementation) should work with no problems with Java Report Panel. No SSL for CORBA communications between BOE servers needed.
There must be some config issue - I think it'll be easier to find out and fix this if you open a support ticket.

Playback in edit window of PE8 is bad quality and slow/choppy

I just bought a new PC (yesterday!) so I could use this software and make movies.
It's running windows 7, on HP pavilion p6310, 64 bit, quad-core processor,1 T hard drive, NVIDIA geforce 9100 graphics, 15-1 memory card reader.
My camera is a Canon ZR 850 mini DV.
Project setting: NTSC-DV-standard 48kHz
i ran msconfig and shut down what I could.
I updated quicktime and new drivers from NVIDIA
My clips are beautiful in Photoshop's organizer. They're great when i preview them in premiere. When i bring them into the edit window playback is terribly, choppy, and grainy and just plain bad. Will this change when my project is complete? or is this the quality of my finished project. What have I done wrong? What more can I do?
I've heard people talk of "rendering" on this forum. Not sure if that is something that I have to do, or if it is done automatically.
Please advise.
Thanks so much.

Hunt,
Yes, I capture with firewire.
I updated PrE8
read that article, it was very helpful,
I do have another hard drive I use to back up all my pics and videos,
I don't know what particians and controller type is,
I changed the monitor to 100% instead of fit. It doesn't look any different to me, just smaller. I don't have the quality settings, just as you thought
I'm not sure what GPU accelleration and Open GL settings are?
I'll look over the OS optimization tips too. Don;t know how i missed that.
Thanks so much for your help.
Neale,
Thanks for your advice. The one thing on my old PC I hated to give up was Nero. It was installedon my old PC by someone in my husbands office and i don't have the original disc to put it on my new PC

SQL edit window lost?

Similar Messages

Maybe you are looking for